- 03 12月, 2006 6 次提交
-
-
由 Gerrit Renker 提交于
This patch performs a simplifying (performance) optimisation: In each call of the inline function ccid3_calc_new_t_ipi(), the state is tested against TFRC_SSTATE_NO_FBACK. This is expensive when the function is called very often. A simpler solution, implemented by this patch, is to adapt the control flow. Background:
-
由 Gerrit Renker 提交于
Problem:
-
由 Ian McDonald 提交于
This removes a non-referenced variable. Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Gerrit Renker 提交于
This reaps the benefit of the earlier patch, which changed the type of CCID 3 states to use enums, in that many conditions are now simplified and the number of possible (unexpected) values is greatly reduced. In a few instances, this also allowed to simplify pre-conditions; where care has been taken to retain logical equivalence. [DCCP]: Introduce a consistent BUG/WARN message scheme This refines the existing set of DCCP messages so that * BUG(), BUG_ON(), WARN_ON() have meaningful DCCP-specific counterparts * DCCP_CRIT (for severe warnings) is not rate-limited * DCCP_WARN() is introduced as rate-limited wrapper Using these allows a faster and cleaner transition to their original counterparts once the code has matured into a full DCCP implementation. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Gerrit Renker 提交于
This adds a CCID3 debug option to the configuration menu which is missing in Kconfig, but already used by the code. CCID 2 already provides such an entry. To enable debugging, set CONFIG_IP_DCCP_CCID3_DEBUG=y NOTE: The use of ccid3_{t,r}x_state_name is safe, since now only enum values can appear. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Gerrit Renker 提交于
This patch tackles the following problem: * the ccid3_hc_{t,r}x_sock define ccid3hc{t,r}x_state as `u8', but in reality there can only be a few, pre-defined enum names * this necessitates addiditional checking for unexpected values which would otherwise be caught by the compiler Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
- 25 10月, 2006 1 次提交
-
-
由 Gerrit Renker 提交于
Updates the references to spec documents throughout the code, taking into account that * the DCCP, CCID 2, and CCID 3 drafts all became RFCs in March this year * RFC 1063 was obsoleted by RFC 1191 * draft-ietf-tcpimpl-pmtud-0x.txt was published as an Informational RFC, RFC 2923 on 2000-09-22. All references verified. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 9月, 2006 1 次提交
-
-
由 Ian McDonald 提交于
With constants for CCID numbers this now uses them in some places. Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
- 23 9月, 2006 1 次提交
-
-
由 Ian McDonald 提交于
As Arnaldo Carvalho de Melo points out I should be using list_entry in case the structure changes in future. Current code functions but is reliant on position and requires type cast. Noticed when doing this that I have one more variable than I needed so removing that also. Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 8月, 2006 2 次提交
-
-
由 Ian McDonald 提交于
This fixes CCID3 to give much closer performance to RFC4342. CCID3 is meant to alter sending rate based on RTT and loss. The performance was verified against: http://wand.net.nz/~perry/max_download.php For example I tested with netem and had the following parameters: Delayed Acks 1, MSS 256 bytes, RTT 105 ms, packet loss 5%. This gives a theoretical speed of 71.9 Kbits/s. I measured across three runs with this patch set and got 70.1 Kbits/s. Without this patchset the average was 232 Kbits/s which means Linux can't be used for CCID3 research properly. I also tested with netem turned off so box just acting as router with 1.2 msec RTT. The performance with this is the same with or without the patch at around 30 Mbit/s. Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ian McDonald 提交于
Just updating copyright and contacts Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 7月, 2006 1 次提交
-
-
由 Jörn Engel 提交于
Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 21 3月, 2006 7 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
And not the silly LIMIT_NETDEBUG and silently return without inserting the option requested. Also drop some old debugging messages associated to option insertion. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
I guess I forgot to add it, nah, now it just works: 18:04:33.274066 IP6 ::1.1476 > ::1.5001: request (service=0) 18:04:33.334482 IP6 ::1.5001 > ::1.1476: reset (code=bad_service_code) Ditched IP_DCCP_UNLOAD_HACK, as now we would have to do it for both IPv6 and IPv4, so I'll come up with another way for freeing the control sockets in upcoming changesets. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrea Bittau 提交于
This also fixes the layout of dccp_hdr short sequence numbers, problem was not fatal now as we only support long (48 bits) sequence numbers. Signed-off-by: NAndrea Bittau <a.bittau@cs.ucl.ac.uk> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
1. No need for ->ccid_init nor ->ccid_exit, this is what module_{init,exit} does and anynways neither ccid2 nor ccid3 were using it. 2. Rename struct ccid to struct ccid_operations and introduce struct ccid with a pointer to ccid_operations and rigth after it the rx or tx private state. 3. Remove the pointer to the state of the half connections from struct dccp_sock, now its derived thru ccid_priv() from the ccid pointer. Now we also can implement the setsockopt for changing the CCID easily as no ccid init routines can affect struct dccp_sock in any way that prevents other CCIDs from working if a CCID switch operation is asked by apps. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Testing if the ccid being instantiated has these methods in ccid_init(). Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 3月, 2006 1 次提交
-
-
由 Ian McDonald 提交于
In rare circumstances 0 is returned by dccp_li_hist_calc_i_mean which leads to a divide by zero in ccid3_hc_rx_packet_recv. Explicitly check for zero return now. Update copyright notice at same time. Found by Arnaldo. Signed-off-by: NIan McDonald <imcdnzl@gmail.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 9月, 2005 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Allocation for the optnames is similar to the DCCP options, with a range for rx and tx half connection CCIDs. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 9月, 2005 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 9月, 2005 2 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Also use some BUG_ON where appropriate and use LIMIT_NETDEBUG for the unlikely cases where we, at this stage, want to know about, that in my tests hasn't appeared in the radar. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Arnaldo Carvalho de Melo 提交于
To match more closely what is described in RFC 3448. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NIan McDonald <iam4@cs.waikato.ac.nz>
-
- 09 9月, 2005 8 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Arnaldo Carvalho de Melo 提交于
To start the timestamps with 0.0ms, easing the integer maths in the CCIDs, this probably will be reworked to use the to be introduced struct timeval_offset infrastructure out of skb_get_timestamp, etc. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Arnaldo Carvalho de Melo 提交于
The initialization of ccid3hcrx_rtt to 5ms is just a bandaid, I'll continue auditing the CCID3 HC rx codebase to fix this properly, probably I'll add a feedback timer as suggested in the CCID3 draft. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
-
- 30 8月, 2005 8 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
This makes the send rate calculations behave way more closely to what is specified, with the jitter previously seen on x and x_recv disappearing completely on non lossy setups. This resembles the tcp_data_snd_check code, that possibly we'll end up using in DCCP as well, perhaps moving this code to inet_connection_sock. For now I'm doing the simplest implementation tho. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
So that applications can set dccp_sock->dccps_pkt_size, that in turn is used in the CCID3 half connection init routines to set ccid3hc[tr]x_s and use it in its rate calculations. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Renaming it to dccp_rx_hist_detect_loss. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Renaming it to dccp_rx_hist_add_packet. Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
And put this into net/dccp/ccids/lib/, where packet_history.[ch] will also be moved and then we'll have a tfrc_lib.ko module that will be used by dccp_ccid3.ko and other CCIDs that are variations of TFRC (RFC 3448). Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-