This patch performs a simplifying (performance) optimisation:

 In each call of the inline function ccid3_calc_new_t_ipi(), the state is
 tested against TFRC_SSTATE_NO_FBACK. This is expensive when the function
 is called very often. A simpler solution, implemented by this patch, is
 to adapt the control flow.

Background:

Problem:

Now that we can stuff bigger ack vectors into options.
Signed-off-by: NAndrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

This removes a non-referenced variable.
Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

This adds documentation to the CCID 3 rx/tx socket fields, plus some
minor re-formatting.
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

This reaps the benefit of the earlier patch, which changed the type of
CCID 3 states to use enums, in that many conditions are now simplified
and the number of possible (unexpected) values is greatly reduced.

In a few instances, this also allowed to simplify pre-conditions; where
care has been taken to retain logical equivalence.

[DCCP]: Introduce a consistent BUG/WARN message scheme

This refines the existing set of DCCP messages so that
 * BUG(), BUG_ON(), WARN_ON() have meaningful DCCP-specific counterparts
 * DCCP_CRIT (for severe warnings) is not rate-limited
 * DCCP_WARN() is introduced as rate-limited wrapper

Using these allows a faster and cleaner transition to their original
counterparts once the code has matured into a full DCCP implementation.
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

This adds a CCID3 debug option to the configuration menu
which is missing in Kconfig, but already used by the code.

CCID 2 already provides such an entry.

To enable debugging, set CONFIG_IP_DCCP_CCID3_DEBUG=y

NOTE: The use of ccid3_{t,r}x_state_name is safe, since
      now only enum values can appear.
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

This patch
  * makes debugging (when configured) work both for static / module build
  * provides generic debugging macros for use in other DCCP / CCID modules
  * adds missing information about debug parameters to Kconfig
  * performs some code tidy-up
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

These are code optimizations which are relevant when dealing with large
windows.  They are not coded the way I would like to, but they do the job for
the short-term.  This patch should be more neat.

Commiter note: Changed the seqno comparisions to use {after,before}48 to handle
               wrapping.
Signed-off-by: NAndrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

This patch tackles the following problem:
       * the ccid3_hc_{t,r}x_sock define ccid3hc{t,r}x_state as `u8', but
         in reality there can only be a few, pre-defined enum names
       * this necessitates addiditional checking for unexpected values
         which would otherwise be caught by the compiler
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

Fix printk format warnings:
build2.out:net/dccp/ccids/ccid2.c:355: warning: long long unsigned int format, u64 arg (arg 3)
build2.out:net/dccp/ccids/ccid2.c:360: warning: long long unsigned int format, u64 arg (arg 3)
build2.out:net/dccp/ccids/ccid2.c:482: warning: long long unsigned int format, u64 arg (arg 5)
build2.out:net/dccp/ccids/ccid2.c:639: warning: long long unsigned int format, u64 arg (arg 3)
build2.out:net/dccp/ccids/ccid2.c:639: warning: long long unsigned int format, u64 arg (arg 4)
build2.out:net/dccp/ccids/ccid2.c:674: warning: long long unsigned int format, u64 arg (arg 3)
build2.out:net/dccp/ccids/ccid2.c:720: warning: long long unsigned int format, u64 arg (arg 3)
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Updates the references to spec documents throughout the code, taking into
account that

* the DCCP, CCID 2, and CCID 3 drafts all became RFCs in March this year

* RFC 1063 was obsoleted by RFC 1191

* draft-ietf-tcpimpl-pmtud-0x.txt was published as an Informational
  RFC, RFC 2923 on 2000-09-22.

All references verified.
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With constants for CCID numbers this now uses them in some places.
Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

Introduce methods which manipulate interesting congestion control
state such as pipe and rtt estimate.  This is useful for people
wishing to monitor the variables of CCID and instrument the code
[perhaps using Kprobes].  Personally, I am a fan of
encapsulation---that justifies this change =D.
Signed-off-by: NAndrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When multiple losses occur in one RTT, the window should be halved
only once [a single "congestion event"].  This is now implemented,
although not perfectly.  Slightly changed the interface for changing
the cwnd: pass hctx instead of dp.  This is required in order to allow
for change_cwnd to be called from _init().
Signed-off-by: NAndrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allocate more sequence state on demand.  Each time a packet is sent
out by CCID2, a record of it needs to be kept.  This list of records
grows proportionally to cwnd.  Previously, the length of this list was
hardcored and therefore the cwnd could only grow to this value (of
128).  Now, records are allocated on demand as necessary---cwnd may
grow as it wishes.  The exceptional case of when memory is not
available is not handled gracefully.  Perhaps, cwnd should be capped
at that point.
Signed-off-by: NAndrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allow the user to choose whether or not to enable CCID2 debugging via
Kconfig.
Signed-off-by: NAndrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If not enough cwnd is available, tell the sender to check again as
soon as possible.  This will increase CPU utilization (polling
frequently for cwnd) but will improve network performance.  That is,
the sender will need to wait less before detecting the increase of
cwnd.  A better architecture would be for the CCID to call-back (or
dequeue) from DCCP when it is able to transmit traffic -- not the
other way around as it currently occurs.
Signed-off-by: NAndrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Initialize the slow-start threshold to infinity.  This way, upon connection
initiation, slow-start will be exited only upon a packet loss.  This patch will
allow connections to quickly gain speed.
Signed-off-by: NAndrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jiffies are now handled correctly (I hope) in CCID2.  If they wrap, no
problem.
Signed-off-by: NAndrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix the way state is masked out.  DCCP_ACKVEC_STATE_NOT_RECEIVED is
defined as appears in the packet, therefore bit shifting is not
required.  This fix allows CCID2 to correctly detect losses.
Signed-off-by: NAndrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As Arnaldo Carvalho de Melo points out I should be using list_entry in case
the structure changes in future. Current code functions but is reliant
on position and requires type cast.

Noticed when doing this that I have one more variable than I needed so
removing that also.

Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes CCID3 to give much closer performance to RFC4342.

CCID3 is meant to alter sending rate based on RTT and loss.

The performance was verified against:
http://wand.net.nz/~perry/max_download.php

For example I tested with netem and had the following parameters:
Delayed Acks 1, MSS 256 bytes, RTT 105 ms, packet loss 5%.

This gives a theoretical speed of 71.9 Kbits/s. I measured across three
runs with this patch set and got 70.1 Kbits/s. Without this patchset the
average was 232 Kbits/s which means Linux can't be used for CCID3 research
properly.

I also tested with netem turned off so box just acting as router with 1.2
msec RTT. The performance with this is the same with or without the patch
at around 30 Mbit/s.

Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds a new function dccp_rx_hist_find_entry.

Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Just updating copyright and contacts

Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes a small typo in net/dccp/libs/packet_history.c

Signed off by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>

And not the silly LIMIT_NETDEBUG and silently return without inserting
the option requested.

Also drop some old debugging messages associated to option insertion.
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

No changes in the logic where made.
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I guess I forgot to add it, nah, now it just works:

18:04:33.274066 IP6 ::1.1476 > ::1.5001: request (service=0)
18:04:33.334482 IP6 ::1.5001 > ::1.1476: reset (code=bad_service_code)

Ditched IP_DCCP_UNLOAD_HACK, as now we would have to do it for both
IPv6 and IPv4, so I'll come up with another way for freeing the
control sockets in upcoming changesets.
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make CCID2 and CCID3 default to what was selected for DCCP and use the
standard short description for the CCIDs (TCP-Like & TCP-Friendly).
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This also fixes the layout of dccp_hdr short sequence numbers, problem
was not fatal now as we only support long (48 bits) sequence numbers.
Signed-off-by: NAndrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1. No need for ->ccid_init nor ->ccid_exit, this is what module_{init,exit}
   does and anynways neither ccid2 nor ccid3 were using it.

2. Rename struct ccid to struct ccid_operations and introduce struct ccid
   with a pointer to ccid_operations and rigth after it the rx or tx
   private state.

3. Remove the pointer to the state of the half connections from struct
   dccp_sock, now its derived thru ccid_priv() from the ccid pointer.

Now we also can implement the setsockopt for changing the CCID easily as
no ccid init routines can affect struct dccp_sock in any way that prevents
other CCIDs from working if a CCID switch operation is asked by apps.
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There was a hybrid use of standard timers and sk_timers.  This caused
the reference count of the sock to be incorrect when resetting the RTO
timer.  The sock reference count should now be correct, enabling its
destruction, and allowing the DCCP module to be unloaded.
Signed-off-by: NAndrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

Original work by Andrea Bittau, Arnaldo Melo cleaned up and fixed several
issues on the merge process.

For now CCID2 was turned the default for all SOCK_DCCP connections, but this
will be remedied soon with the merge of the feature negotiation code.
Signed-off-by: NAndrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Testing if the ccid being instantiated has these methods in
ccid_init().
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In rare circumstances 0 is returned by dccp_li_hist_calc_i_mean which
leads to a divide by zero in ccid3_hc_rx_packet_recv. Explicitly check
for zero return now. Update copyright notice at same time.

Found by Arnaldo.
Signed-off-by: NIan McDonald <imcdnzl@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A bunch of asm/bug.h includes are both not needed (since it will get
pulled anyway) and bogus (since they are done too early).  Removed.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>