1. 14 12月, 2009 3 次提交
  2. 13 12月, 2009 1 次提交
  3. 12 12月, 2009 7 次提交
    • H
      nvram: Fix write beyond end condition; prove to gcc copy is safe · a01c7800
      H. Peter Anvin 提交于
      In nvram_write, first of all, correctly handle the case where the file
      pointer is already beyond the end; we should return EOF in that case.
      
      Second, make the logic a bit more explicit so that gcc can statically
      prove that the copy_from_user() is safe.  Once the condition of the
      beyond-end filepointer is eliminated, the copy is safe but gcc can't
      prove it, causing build failures for i386 allyesconfig.
      
      Third, eliminate the entirely superfluous variable "len", and just use
      the passed-in variable "count" instead.
      Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      Cc: Arjan van de Ven <arjan@infradead.org>
      Cc: Andrew Morton <akpm@linux-foundation.org>
      Cc: Wim Van Sebroeck <wim@iguana.be>
      Cc: Frederic Weisbecker <fweisbec@gmail.com>
      LKML-Reference: <tip-*@git.kernel.org>
      a01c7800
    • H
      mm: Adjust do_pages_stat() so gcc can see copy_from_user() is safe · b9255850
      H. Peter Anvin 提交于
      Slightly adjust the logic for determining the size of the
      copy_form_user() in do_pages_stat(); with this change, gcc can see
      that the copying is safe.
      
      Without this, we get a build error for i386 allyesconfig:
      
      /home/hpa/kernel/linux-2.6-tip.urgent/arch/x86/include/asm/uaccess_32.h:213:
      error: call to ‘copy_from_user_overflow’ declared with attribute
      error: copy_from_user() buffer size is not provably correct
      
      Unlike an earlier patch from Arjan, this doesn't introduce new
      variables; merely reshuffles the compare so that gcc can see that an
      overflow cannot happen.
      Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      Cc: Brice Goglin <Brice.Goglin@inria.fr>
      Cc: Arjan van de Ven <arjan@infradead.org>
      Cc: Andrew Morton <akpm@linux-foundation.org>
      Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      LKML-Reference: <20090926205406.30d55b08@infradead.org>
      b9255850
    • M
      x86: Limit the number of processor bootup messages · 2eaad1fd
      Mike Travis 提交于
      When there are a large number of processors in a system, there
      is an excessive amount of messages sent to the system console.
      It's estimated that with 4096 processors in a system, and the
      console baudrate set to 56K, the startup messages will take
      about 84 minutes to clear the serial port.
      
      This set of patches limits the number of repetitious messages
      which contain no additional information.  Much of this information
      is obtainable from the /proc and /sysfs.   Some of the messages
      are also sent to the kernel log buffer as KERN_DEBUG messages so
      dmesg can be used to examine more closely any details specific to
      a problem.
      
      The new cpu bootup sequence for system_state == SYSTEM_BOOTING:
      
      Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7 Ok.
      Booting Node   1, Processors  #8 #9 #10 #11 #12 #13 #14 #15 Ok.
      ...
      Booting Node   3, Processors  #56 #57 #58 #59 #60 #61 #62 #63 Ok.
      Brought up 64 CPUs
      
      After the system is running, a single line boot message is displayed
      when CPU's are hotplugged on:
      
          Booting Node %d Processor %d APIC 0x%x
      
      Status of the following lines:
      
          CPU: Physical Processor ID:		printed once (for boot cpu)
          CPU: Processor Core ID:		printed once (for boot cpu)
          CPU: Hyper-Threading is disabled	printed once (for boot cpu)
          CPU: Thermal monitoring enabled	printed once (for boot cpu)
          CPU %d/0x%x -> Node %d:		removed
          CPU %d is now offline:		only if system_state == RUNNING
          Initializing CPU#%d:		KERN_DEBUG
      Signed-off-by: NMike Travis <travis@sgi.com>
      LKML-Reference: <4B219E28.8080601@sgi.com>
      Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      2eaad1fd
    • M
      x86: Remove enabling x2apic message for every CPU · 450b1e8d
      Mike Travis 提交于
      Print only once that the system is supporting x2apic mode.
      Signed-off-by: NMike Travis <travis@sgi.com>
      Acked-by: NCyrill Gorcunov <gorcunov@openvz.org>
      LKML-Reference: <4B226E92.5080904@sgi.com>
      Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      450b1e8d
    • H
      doc: Add documentation for bootloader_{type,version} · d75757ab
      H. Peter Anvin 提交于
      Add documentation for kernel/bootloader_type and
      kernel/bootloader_version to sysctl/kernel.txt.  This should really
      have been done a long time ago.
      Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      Cc: Shen Feng <shen@cn.fujitsu.com>
      d75757ab
    • B
      x86, msr: Add support for non-contiguous cpumasks · 50542251
      Borislav Petkov 提交于
      The current rd/wrmsr_on_cpus helpers assume that the supplied
      cpumasks are contiguous. However, there are machines out there
      like some K8 multinode Opterons which have a non-contiguous core
      enumeration on each node (e.g. cores 0,2 on node 0 instead of 0,1), see
      http://www.gossamer-threads.com/lists/linux/kernel/1160268.
      
      This patch fixes out-of-bounds writes (see URL above) by adding per-CPU
      msr structs which are used on the respective cores.
      
      Additionally, two helpers, msrs_{alloc,free}, are provided for use by
      the callers of the MSR accessors.
      
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
      Cc: Aristeu Rozanski <aris@redhat.com>
      Cc: Randy Dunlap <randy.dunlap@oracle.com>
      Cc: Doug Thompson <dougthompson@xmission.com>
      Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
      LKML-Reference: <20091211171440.GD31998@aftab>
      Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      50542251
    • H
      Merge commit 'linus/master' into x86/urgent · 5c6baba8
      H. Peter Anvin 提交于
      5c6baba8
  4. 11 12月, 2009 12 次提交
    • Y
      x86: Use find_e820() instead of hard coded trampoline address · 893f38d1
      Yinghai Lu 提交于
      Jens found the following crash/regression:
      
      [    0.000000] found SMP MP-table at [ffff8800000fdd80] fdd80
      [    0.000000] Kernel panic - not syncing: Overlapping early reservations 12-f011 MP-table mpc to 0-fff BIOS data page
      
      and
      
      [    0.000000] Kernel panic - not syncing: Overlapping early reservations 12-f011 MP-table mpc to 6000-7fff TRAMPOLINE
      
      and bisected it to b24c2a92 ("x86: Move find_smp_config()
      earlier and avoid bootmem usage").
      
      It turns out the BIOS is using the first 64k for mptable,
      without reserving it.
      
      So try to find good range for the real-mode trampoline instead of
      hard coding it, in case some bios tries to use that range for sth.
      Reported-by: NJens Axboe <jens.axboe@oracle.com>
      Signed-off-by: NYinghai Lu <yinghai@kernel.org>
      Tested-by: NJens Axboe <jens.axboe@oracle.com>
      Cc: Randy Dunlap <randy.dunlap@oracle.com>
      LKML-Reference: <4B21630A.6000308@kernel.org>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      893f38d1
    • L
      Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 · 3ef884b4
      Linus Torvalds 提交于
      * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (189 commits)
        drm/radeon/kms: fix warning about cur_placement being uninitialised.
        drm/ttm: Print debug information on memory manager when eviction fails
        drm: Add memory manager debug function
        drm/radeon/kms: restore surface registers on resume.
        drm/radeon/kms/r600/r700: fallback gracefully on ucode failure
        drm/ttm: Initialize eviction placement in case the driver callback doesn't
        drm/radeon/kms: cleanup structure and module if initialization fails
        drm/radeon/kms: actualy set the eviction placements we choose
        drm/radeon/kms: Fix NULL ptr dereference
        drm/radeon/kms/avivo: add support for new pll selection algo
        drm/radeon/kms/avivo: fix some bugs in the display bandwidth setup
        drm/radeon/kms: fix return value from fence function.
        drm/radeon: Remove tests for -ERESTART from the TTM code.
        drm/ttm: Have the TTM code return -ERESTARTSYS instead of -ERESTART.
        drm/radeon/kms: Convert radeon to new TTM validation API (V2)
        drm/ttm: Rework validation & memory space allocation (V3)
        drm: Add search/get functions to get a block in a specific range
        drm/radeon/kms: fix avivo tiling regression since radeon object rework
        drm/i915: Remove a debugging printk from hangcheck
        drm/radeon/kms: make sure i2c id matches
        ...
      3ef884b4
    • L
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp · 4e5df806
      Linus Torvalds 提交于
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (21 commits)
        amd64_edac: bump driver version
        amd64_edac: fix use-uninitialised bug
        amd64_edac: correct sys address to chip select mapping
        amd64_edac: add a leaner syndrome decoding algorithm
        amd64_edac: remove early hw support check
        amd64_edac: detect DDR3 memory type
        edac: add memory types strings for debugging
        edac, mce: update AMD F10h revD check
        amd64_edac: remove unneeded extract_error_address wrapper
        amd64_edac: rename StinkyIdentifier
        amd64_edac: remove superfluous dbg printk
        amd64_edac: enhance address to DRAM bank mapping
        amd64_edac: cleanup f10_early_channel_count
        amd64_edac: dump DIMM sizes on K8 too
        amd64_edac: cleanup rest of amd64_dump_misc_regs
        amd64_edac: cleanup DRAM cfg low debug output
        amd64_edac: wrap-up pci config read error handling
        amd64_edac: unify MCGCTL ECC switching
        cpumask: use modern cpumask style in drivers/edac/amd64_edac.c
        amd64_edac: make DRAM regions output more human-readable
        ...
      4e5df806
    • L
      Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linux · aa2cf420
      Linus Torvalds 提交于
      * 'for-linus' of git://gitorious.org/linux-omap-dss2/linux:
        MAINTAINERS: Add OMAP2/3 DSS and OMAPFB maintainer
        OMAP: SDP: Enable DSS2 for OMAP3 SDP board
        OMAP: DSS2: Taal DSI command mode panel driver
        OMAP: DSS2: Add generic and Sharp panel drivers
        OMAP: DSS2: omapfb driver
        OMAP: DSS2: DSI driver
        OMAP: DSS2: SDI driver
        OMAP: DSS2: RFBI driver
        OMAP: DSS2: Video encoder driver
        OMAP: DSS2: DPI driver
        OMAP: DSS2: DISPC
        OMAP: DSS2: Add more core files
        OMAP: DSS2: Display Subsystem Driver core
        OMAP: DSS2: Documentation for DSS2
        OMAP: Add support for VRFB rotation engine
        OMAP: Add VRAM manager
        OMAP: OMAPFB: add omapdss device
        OMAP: OMAPFB: split omapfb.h
        OMAP2: Add funcs for writing SMS_ROT_* registers
      aa2cf420
    • P
      x86, AMD: Fix stale cpuid4_info shared_map data in shared_cpu_map cpumasks · ebb682f5
      Prarit Bhargava 提交于
      The per_cpu cpuid4_info shared_map can contain stale data when CPUs are added
      and removed.
      
      The stale data can lead to a NULL pointer derefernce panic on a remove of a
      CPU that has had siblings previously removed.
      
      This patch resolves the panic by verifying a cpu is actually online before
      adding it to the shared_cpu_map, only examining cpus that are part of
      the same lower level cache, and by updating other siblings lowest level cache
      maps when a cpu is added.
      Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
      LKML-Reference: <20091209183336.17855.98708.sendpatchset@prarit.bos.redhat.com>
      Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      ebb682f5
    • L
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq · d71cb81a
      Linus Torvalds 提交于
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
        workqueue: Add debugobjects support
      d71cb81a
    • L
      Merge branch 'bugfix' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen · ab1831b0
      Linus Torvalds 提交于
      * 'bugfix' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
        xen: try harder to balloon up under memory pressure.
        Xen balloon: fix totalram_pages counting.
        xen: explicitly create/destroy stop_machine workqueues outside suspend/resume region.
        xen: improve error handling in do_suspend.
        xen: don't leak IRQs over suspend/resume.
        xen: call clock resume notifier on all CPUs
        xen: use iret for return from 64b kernel to 32b usermode
        xen: don't call dpm_resume_noirq() with interrupts disabled.
        xen: register runstate info for boot CPU early
        xen: register runstate on secondary CPUs
        xen: register timer interrupt with IRQF_TIMER
        xen: correctly restore pfn_to_mfn_list_list after resume
        xen: restore runstate_info even if !have_vcpu_info_placement
        xen: re-register runstate area earlier on resume.
        xen: wait up to 5 minutes for device connetion
        xen: improvement to wait_for_devices()
        xen: fix is_disconnected_device/exists_disconnected_device
        xen/xenbus: make DEVICE_ATTR()s static
      ab1831b0
    • L
      Merge branch 'xen/fbdev' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen · eae6fa9b
      Linus Torvalds 提交于
      * 'xen/fbdev' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
        xen pvfb: Inhibit VM_IO flag to be set on vmalloc-ed framebuffers.
        fb-defio: Inhibit VM_IO flag to be set on vmalloc-ed framebuffers.
        fb-defio: If FBINFO_VIRTFB is defined, do not set VM_IO flag.
        Fix toogle whether xenbus driver should be built as module or part of kernel.
      eae6fa9b
    • L
    • L
      Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 · 4515c306
      Linus Torvalds 提交于
      * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (47 commits)
        ext4: Fix potential fiemap deadlock (mmap_sem vs. i_data_sem)
        ext4: Do not override ext2 or ext3 if built they are built as modules
        jbd2: Export jbd2_log_start_commit to fix ext4 build
        ext4: Fix insufficient checks in EXT4_IOC_MOVE_EXT
        ext4: Wait for proper transaction commit on fsync
        ext4: fix incorrect block reservation on quota transfer.
        ext4: quota macros cleanup
        ext4: ext4_get_reserved_space() must return bytes instead of blocks
        ext4: remove blocks from inode prealloc list on failure
        ext4: wait for log to commit when umounting
        ext4: Avoid data / filesystem corruption when write fails to copy data
        ext4: Use ext4 file system driver for ext2/ext3 file system mounts
        ext4: Return the PTR_ERR of the correct pointer in setup_new_group_blocks()
        jbd2: Add ENOMEM checking in and for jbd2_journal_write_metadata_buffer()
        ext4: remove unused parameter wbc from __ext4_journalled_writepage()
        ext4: remove encountered_congestion trace
        ext4: move_extent_per_page() cleanup
        ext4: initialize moved_len before calling ext4_move_extents()
        ext4: Fix double-free of blocks with EXT4_IOC_MOVE_EXT
        ext4: use ext4_data_block_valid() in ext4_free_blocks()
        ...
      4515c306
    • L
      Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osd · a5eba3f6
      Linus Torvalds 提交于
      * 'for-linus' of git://git.open-osd.org/linux-open-osd:
        exofs: Multi-device mirror support
        exofs: Move all operations to an io_engine
        exofs: move osd.c to ios.c
        exofs: statfs blocks is sectors not FS blocks
        exofs: Prints on mount and unmout
        exofs: refactor exofs_i_info initialization into common helper
        exofs: dbg-print less
        exofs: More sane debug print
        trivial: some small fixes in exofs documentation
      a5eba3f6
    • L
      Merge git://git.infradead.org/ubifs-2.6 · fc1495bf
      Linus Torvalds 提交于
      * git://git.infradead.org/ubifs-2.6:
        UBIFS: fix return code in check_leaf
        UBI: flush wl before clearing update marker
        MAINTAINERS: change e-mail of Artem Bityutskiy
        UBIFS: remove manual O_SYNC handling
        UBIFS: support mounting of UBI volume character devices
        UBI: Add ubi_open_volume_path
      fc1495bf
  5. 10 12月, 2009 17 次提交
    • D
      V4L/DVB (13592): max2165: 32bit build patch · 5476ffd2
      David Wong 提交于
      This patch drops usage of floating point variable for 32bit build
      Signed-off-by: NDavid T. L. Wong <davidtlwong@gmail.com>
      Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
      Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
      5476ffd2
    • I
      Merge branch 'amd-iommu/fixes' of... · 9cf78267
      Ingo Molnar 提交于
      Merge branch 'amd-iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu into x86/urgent
      9cf78267
    • J
      x86/amd-iommu: Fix PCI hotplug with passthrough mode · 8638c491
      Joerg Roedel 提交于
      The device change notifier is initialized in the dma_ops
      initialization path. But this path is never executed for
      iommu=pt. Move the notifier initialization to IOMMU hardware
      init code to fix this.
      Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
      8638c491
    • J
      x86/amd-iommu: Fix passthrough mode · b7cc9554
      Joerg Roedel 提交于
      The data structure changes to use dev->archdata.iommu field
      broke the iommu=pt mode because in this case the
      dev->archdata.iommu was left uninitialized. This moves the
      inititalization of the devices into the main init function
      and fixes the problem.
      Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
      b7cc9554
    • B
      exofs: Multi-device mirror support · 04dc1e88
      Boaz Harrosh 提交于
      This patch changes on-disk format, it is accompanied with a parallel
      patch to mkfs.exofs that enables multi-device capabilities.
      
      After this patch, old exofs will refuse to mount a new formatted FS and
      new exofs will refuse an old format. This is done by moving the magic
      field offset inside the FSCB. A new FSCB *version* field was added. In
      the future, exofs will refuse to mount unmatched FSCB version. To
      up-grade or down-grade an exofs one must use mkfs.exofs --upgrade option
      before mounting.
      
      Introduced, a new object that contains a *device-table*. This object
      contains the default *data-map* and a linear array of devices
      information, which identifies the devices used in the filesystem. This
      object is only written to offline by mkfs.exofs. This is why it is kept
      separate from the FSCB, since the later is written to while mounted.
      
      Same partition number, same object number is used on all devices only
      the device varies.
      
      * define the new format, then load the device table on mount time make
        sure every thing is supported.
      
      * Change I/O engine to now support Mirror IO, .i.e write same data
        to multiple devices, read from a random device to spread the
        read-load from multiple clients (TODO: stripe read)
      
      Implementation notes:
       A few points introduced in previous patch should be mentioned here:
      
      * Special care was made so absolutlly all operation that have any chance
        of failing are done before any osd-request is executed. This is to
        minimize the need for a data consistency recovery, to only real IO
        errors.
      
      * Each IO state has a kref. It starts at 1, any osd-request executed
        will increment the kref, finally when all are executed the first ref
        is dropped. At IO-done, each request completion decrements the kref,
        the last one to return executes the internal _last_io() routine.
        _last_io() will call the registered io_state_done. On sync mode a
        caller does not supply a done method, indicating a synchronous
        request, the caller is put to sleep and a special io_state_done is
        registered that will awaken the caller. Though also in sync mode all
        operations are executed in parallel.
      Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
      04dc1e88
    • B
      exofs: Move all operations to an io_engine · 06886a5a
      Boaz Harrosh 提交于
      In anticipation for multi-device operations, we separate osd operations
      into an abstract I/O API. Currently only one device is used but later
      when adding more devices, we will drive all devices in parallel according
      to a "data_map" that describes how data is arranged on multiple devices.
      The file system level operates, like before, as if there is one object
      (inode-number) and an i_size. The io engine will split this to the same
      object-number but on multiple device.
      
      At first we introduce Mirror (raid 1) layout. But at the final outcome
      we intend to fully implement the pNFS-Objects data-map, including
      raid 0,4,5,6 over mirrored devices, over multiple device-groups. And
      more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12
      
      * Define an io_state based API for accessing osd storage devices
        in an abstract way.
        Usage:
      	First a caller allocates an io state with:
      		exofs_get_io_state(struct exofs_sb_info *sbi,
      				   struct exofs_io_state** ios);
      
      	Then calles one of:
      		exofs_sbi_create(struct exofs_io_state *ios);
      		exofs_sbi_remove(struct exofs_io_state *ios);
      		exofs_sbi_write(struct exofs_io_state *ios);
      		exofs_sbi_read(struct exofs_io_state *ios);
      		exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len);
      
      	And when done
      		exofs_put_io_state(struct exofs_io_state *ios);
      
      * Convert all source files to use this new API
      * Convert from bio_alloc to bio_kmalloc
      * In io engine we make use of the now fixed osd_req_decode_sense
      
      There are no functional changes or on disk additions after this patch.
      Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
      06886a5a
    • B
      exofs: move osd.c to ios.c · 8ce9bdd1
      Boaz Harrosh 提交于
      If I do a "git mv" together with a massive code change
      and commit in one patch, git looses the rename and
      records a delete/new instead. This is bad because I want
      a rename recorded so later rebased/cherry-picked patches
      to the old name will work. Also the --follow is lost.
      Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
      8ce9bdd1
    • B
      exofs: statfs blocks is sectors not FS blocks · cae012d8
      Boaz Harrosh 提交于
      Even though exofs has a 4k block size, statfs blocks
      is in sectors (512 bytes).
      
      Also if target returns 0 for capacity then make it
      ULLONG_MAX. df does not like zero-size filesystems
      Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
      cae012d8
    • B
      exofs: Prints on mount and unmout · 19fe294f
      Boaz Harrosh 提交于
      It is important to print in the logs when a filesystem was
      mounted and eventually unmounted.
      
      Print the osd-device's osd_name and pid the FS was
      mounted/unmounted on.
      
      TODO: How to also print the namespace path the filesystem was
            mounted on?
      Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
      19fe294f
    • B
      exofs: refactor exofs_i_info initialization into common helper · 9cfdc7aa
      Boaz Harrosh 提交于
      There are two places that initialize inodes: exofs_iget() and
      exofs_new_inode()
      
      As more members of exofs_i_info that need initialization are
      added this code will grow. (soon)
      Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
      9cfdc7aa
    • B
      exofs: dbg-print less · fe33cc1e
      Boaz Harrosh 提交于
      Iner-loops printing is converted to EXOFS_DBG2 which is #defined
      to nothing.
      
      It is now almost bareable to just leave debug-on. Every operation
      is printed once, with most relevant info (I hope).
      Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
      fe33cc1e
    • B
      exofs: More sane debug print · 58311c43
      Boaz Harrosh 提交于
      debug prints should be somewhat useful without actually
      reading the source code
      Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
      58311c43
    • T
      trivial: some small fixes in exofs documentation · 9f249162
      Thadeu Lima de Souza Cascardo 提交于
      Add exofs.txt to filesystems Documentation index and fix some typos,
      identation and grammar.
      Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
      Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
      9f249162
    • J
      x86: mmio-mod.c: Use pr_fmt · 3a0340be
      Joe Perches 提交于
      - Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
       - Remove #define NAME
       - Remove NAME from pr_<level>
      Signed-off-by: NJoe Perches <joe@perches.com>
      LKML-Reference: <009cb214c45ef932df0242856228f4739cc91408.1260383912.git.joe@perches.com>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      3a0340be
    • J
      x86: kmmio.c: Add and use pr_fmt(fmt) · 1bd591a5
      Joe Perches 提交于
      - Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
       - Strip "kmmio: " from pr_<level>s
      Signed-off-by: NJoe Perches <joe@perches.com>
      LKML-Reference: <7aa509f8a23933036d39f54bd51e9acc52068049.1260383912.git.joe@perches.com>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      1bd591a5
    • J
      x86: i8254.c: Add pr_fmt(fmt) · a78d9626
      Joe Perches 提交于
      - Add pr_fmt(fmt) "pit: " fmt
       - Strip pit: prefixes from pr_debug
      Signed-off-by: NJoe Perches <joe@perches.com>
      LKML-Reference: <bbd4de532f18bb7c11f64ba20d224c08291cb126.1260383912.git.joe@perches.com>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      a78d9626
    • J
      x86: setup_percpu.c: Use pr_<level> and add pr_fmt(fmt) · 40685236
      Joe Perches 提交于
      - Added #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
       - Stripped PERCPU: from a pr_warning
      Signed-off-by: NJoe Perches <joe@perches.com>
      LKML-Reference: <7ead24eccbea8f2b11795abad3e2893a98e1e111.1260383912.git.joe@perches.com>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      40685236