When DRM support for Samsung SoC and Samsung S3C framebuffer support
are selected, the kernel crashes as it does not get the required
platform data. Change the compile macro to CONFIG_DRM_EXYNOS_FIMD
to fix this.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Previously, the ASoC 'platform' (PCM/DMA) object was instantiated via a
platform_device. This didn't represent the hardware well, since there
was no separate hardware associated with this platform_device; it was a
virtual device with sole purpose to call snd_soc_register_platform().

This change removes the platform_device completely. Each Samsung DAI now
registers the ASoC 'platform' itself. Machine drivers are adjusted for
the new 'platform' name.
Signed-off-by: NPadmavathi Venna <padma.v@samsung.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This patch reorders inclusions of <linux/platform_data/xxx.h>
and puts the inclusions with the same kind for readability,
according to alphabetical ordering.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

As exynos-drm is a software device, its registration is moved to the
exynos drm driver. This will provide generic solution for device registration
for dt and non-dt platforms. Corresponding patches are posted to dri-devel
list.
Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Platform data for device drivers should be defined in
include/linux/platform_data/*.h, not in the architecture
and platform specific directories.

This moves such data out of the samsung include directories
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NNicolas Pitre <nico@linaro.org>
Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Bryan Wu <bryan.wu@canonical.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Chris Ball <cjb@laptop.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Liam Girdwood <lrg@ti.com>
Cc: linux-samsung-soc@vger.kernel.org

Convert Exynos4 to use struct smp_operations to provide its SMP
and CPU hotplug operations.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NNicolas Pitre <nico@linaro.org>
Tested-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Generic PWM framework requires that the board setup code
register a static mapping that can be used to match PWM
consumers to providers.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Reviewed-by: <thierry.reding@avionic-design.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Sets HDMI platform data in SMDKV310 board.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch moves the contents from regs-fb-v4.h and regs-fb.h to
include/video/samsung_fimd.h. Also updates the header inclusion in
machine files and driver files accordingly.
Signed-off-by: NLeela Krishna Amudala <l.krishna@samsung.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Adds missing .reserve field to SMDKC210 board.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Since clk_xusbxti.rate is 24Mhz as a default,
so we don't need to set that when it is 24Mhz.
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

After using snd_soc_register_card() in smdk_wm8994.c, the sound
card is registered as a platform driver and it needs related platform
device entry in machine file.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NSangbeom Kim <sbkim73@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Nowadays we use generic power domain support instead of Samsung
specific power domain control driver.

Cc: Thomas Abraham <thomas.abraham@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

S3C-HSOTG device is added to SMDKV310 board.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

DRM core device and FIMD DRM platform device support is added to SMDKV310 board.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Signed-off-by: NTushar Behera <tushar.behera@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>

The sdhci driver is modified to be independent of clk_type member in the sdhci
platform data. Hence, all usage of clk_type in platform code is removed.
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
[kgene.kim@samsung.com: re-worked on top of v3.4-rc2]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

For all the Samsung SoC based boards which have the platform data for
s3c-fb driver, the 'default_win' element in the platform data is removed
and the lcd panel video timing values are moved out of individual window
configuration data.
Acked-by: NJingoo Han <jg1.han@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: JeongHyeon Kim <jhkim@insignal.co.kr>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kwangwoo Lee <kwangwoo.lee@gmail.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Darius Augulis <augulis.darius@gmail.com>
Cc: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Handling System MMUs with an identifier is not flexible to manage
System MMU platform devices because of the following reasons:
1. A device driver which needs to handle System MMU must know the ID.
2. A System MMU may not present in some implementations of Exynos family.
3. Handling System MMU with IOMMU API does not require an ID.

This patch is the result of removing ID of System MMUs.
Instead, a device driver that needs to handle its System MMU must
use IOMMU API while its descriptor of platform device is given.

This patch also includes the following enhancements:
- A System MMU device becomes a child if its power domain device.
- clkdev
Signed-off-by: NKyongHo Cho <pullip.cho@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Enables JPEG support on SMDKV310 board.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch enables G2D support on SMDKV310 board.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

FIMC media device (md) registers all required video nodes.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Add support for generic power domain for Exynos4 platforms and remove the
Samsung specific power domain control for Exynos4.

The generic power domain infrastructure is used to control the power domains
available on Exynos4. For non-dt platforms, the power domains are statically
instantiated. For dt platforms, the power domain nodes found in the device
tree are instantiated.

Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Hook these platforms restart code into the new restart hook rather
than using arch_reset().

[kgene.kim@samsung.com: according to local header, updated]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch introduces common.[ch] which are used only in the
arch/arm/mach-exynos/ directory. The common.c file merges
the cpu.c, init.c, irq-combiner.c and irq-eint.c files which
are used commonly on EXYNOS SoCs and the common.h file replaces
with plat/exynos4.h file.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

By using gpio_request_one it is possible to set the direction
and initial value in one shot. Thus, using gpio_request_one can
make the code simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Convert the Exynos4 platforms to be using the gic_handle_irq
function as their primary interrupt handler.

Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

The arch/arm/mach-exynos4 directory (CONFIG_ARCH_EXYNOS4) has
made for plaforms based on EXYNOS4 SoCs. But since upcoming
Samsung's SoCs such as EXYNOS5 (ARM Cortex A15) can reuse most
codes in current mach-exynos4, one mach-exynos directory will
be used for them.

This patch changes to CONFIG_ARCH_EXYNOS (arch/arm/mach-exynos)
but keeps original CONFIG_ARCH_EXYNOS4 in mach-exynos/Kconfig to
avoid changing in driver side.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds definitions to enable support for s5p-fimc driver on
SMDKV310 board.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch is to support usb ehci device to the SMDKV310 board.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Add support for TVOUT on SMDKV310 board.
Signed-off-by: NHatim Ali <hatim.rv@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Based on "ARM: introduce atag_offset to replace boot_params"
by Nicolas Pitre (2bb9839e).

Since boot_params variable is deleted from machine_desc, the variable
is modified in the newer board files.

Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: NTushar Behera <tushar.behera@linaro.org>
[kgene.kim@samsung.com: added fixing for smdkv310]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>

Since the components on SMDKC210 are similar with SMDKV310
even though its memory is different. So we can support the
SMDKC210 and SMDKV310 on mach-smdkv310.c, one machine file.
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Exynos4 and S5PC110(S5PV210) has Internal dma(idma) in AUDSS.
To support idma, register idma platform device.
and Exynos4 and S5PC110 has different IDMA address.
TO handle different IDMA address, register idma platform data
Signed-off-by: NSangbeom Kim <sbkim73@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds support for LCD backlight using PWM timer for
Samsung SMDKV310 board.
Signed-off-by: NBanajit Goswami <banajit.g@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds spdif to the machine supported device list for
SMDKV310.
Signed-off-by: NNaveen Krishna Chatradhi <ch.naveen@samsung.com>
Acked-by: NJassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>