ARM: samsung: move platform_data definitions

Platform data for device drivers should be defined in
include/linux/platform_data/*.h, not in the architecture
and platform specific directories.

This moves such data out of the samsung include directories
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NNicolas Pitre <nico@linaro.org>
Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Bryan Wu <bryan.wu@canonical.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Chris Ball <cjb@laptop.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Sangbeom Kim <sbkim73@samsung.com>
Cc: Liam Girdwood <lrg@ti.com>
Cc: linux-samsung-soc@vger.kernel.org

arch/arm/mach-exynos/dev-audio.c

@@ -16,7 +16,7 @@
 #include <linux/gpio.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
 
 #include <mach/map.h>
 #include <mach/dma.h>

arch/arm/mach-exynos/dev-ohci.c

@@ -15,7 +15,7 @@
 
 #include <mach/irqs.h>
 #include <mach/map.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-exynos.h>
 
 #include <plat/devs.h>
 #include <plat/usb-phy.h>

arch/arm/mach-exynos/mach-nuri.c

@@ -45,14 +45,14 @@
 #include <plat/devs.h>
 #include <plat/fb.h>
 #include <plat/sdhci.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
 #include <plat/clock.h>
 #include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/mfc.h>
 #include <plat/fimc-core.h>
 #include <plat/camport.h>
-#include <plat/mipi_csis.h>
+#include <linux/platform_data/mipi-csis.h>
 
 #include <mach/map.h>
 

arch/arm/mach-exynos/mach-origen.c

@@ -35,15 +35,15 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/sdhci.h>
-#include <plat/iic.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
 #include <plat/clock.h>
 #include <plat/gpio-cfg.h>
 #include <plat/backlight.h>
 #include <plat/fb.h>
 #include <plat/mfc.h>
 
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-exynos.h>
 #include <mach/map.h>
 
 #include <drm/exynos_drm.h>

arch/arm/mach-exynos/mach-smdk4x12.c

@@ -32,7 +32,7 @@
 #include <plat/devs.h>
 #include <plat/fb.h>
 #include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/keypad.h>
 #include <plat/mfc.h>
 #include <plat/regs-fb.h>

arch/arm/mach-exynos/mach-smdkv310.c

@@ -34,15 +34,15 @@
 #include <plat/fb.h>
 #include <plat/keypad.h>
 #include <plat/sdhci.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 #include <plat/backlight.h>
 #include <plat/mfc.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
 #include <plat/clock.h>
 
 #include <mach/map.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-exynos.h>
 
 #include <drm/exynos_drm.h>
 #include "common.h"

arch/arm/mach-exynos/mach-universal_c210.c

@@ -34,7 +34,7 @@
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 #include <plat/fb.h>
 #include <plat/mfc.h>
@@ -43,7 +43,7 @@
 #include <plat/fimc-core.h>
 #include <plat/s5p-time.h>
 #include <plat/camport.h>
-#include <plat/mipi_csis.h>
+#include <linux/platform_data/mipi-csis.h>
 
 #include <mach/map.h>
 

arch/arm/mach-exynos/setup-i2c0.c

@@ -14,7 +14,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 #include <plat/cpu.h>
 

arch/arm/mach-exynos/setup-i2c1.c

@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c1_cfg_gpio(struct platform_device *dev)

arch/arm/mach-exynos/setup-i2c2.c

@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c2_cfg_gpio(struct platform_device *dev)

arch/arm/mach-exynos/setup-i2c3.c

@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c3_cfg_gpio(struct platform_device *dev)

arch/arm/mach-exynos/setup-i2c4.c

@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c4_cfg_gpio(struct platform_device *dev)

arch/arm/mach-exynos/setup-i2c5.c

@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c5_cfg_gpio(struct platform_device *dev)

arch/arm/mach-exynos/setup-i2c6.c

@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c6_cfg_gpio(struct platform_device *dev)

arch/arm/mach-exynos/setup-i2c7.c

@@ -13,7 +13,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c7_cfg_gpio(struct platform_device *dev)

arch/arm/mach-s3c24xx/common-smdk.c

@@ -37,9 +37,9 @@
 #include <asm/irq.h>
 
 #include <mach/regs-gpio.h>
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
 
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 
 #include <plat/common-smdk.h>
 #include <plat/gpio-cfg.h>

arch/arm/mach-s3c24xx/mach-amlm5900.c

@@ -53,7 +53,7 @@
 #include <mach/regs-lcd.h>
 #include <mach/regs-gpio.h>
 
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/gpio-cfg.h>

arch/arm/mach-s3c24xx/mach-anubis.c

@@ -40,8 +40,8 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -53,7 +53,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/audio-simtec.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
 
 #include "simtec.h"
 #include "common.h"

arch/arm/mach-s3c24xx/mach-at2440evb.c

@@ -36,8 +36,8 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -47,7 +47,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/mci.h>
+#include <linux/platform_data/mmc-s3cmci.h>
 
 #include "common.h"
 

arch/arm/mach-s3c24xx/mach-bast.c

@@ -45,9 +45,9 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 
-#include <plat/hwmon.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/hwmon-s3c.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <mach/fb.h>
 
 #include <linux/mtd/mtd.h>
@@ -62,7 +62,7 @@
 #include <plat/cpu.h>
 #include <plat/cpu-freq.h>
 #include <plat/gpio-cfg.h>
-#include <plat/audio-simtec.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
 
 #include "simtec.h"
 #include "common.h"

arch/arm/mach-s3c24xx/mach-gta02.c

@@ -73,21 +73,21 @@
 #include <mach/regs-gpio.h>
 #include <mach/fb.h>
 
-#include <plat/usb-control.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
 #include <mach/regs-mem.h>
 #include <mach/hardware.h>
 
 #include <mach/gta02.h>
 
 #include <plat/regs-serial.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/pm.h>
-#include <plat/udc.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
 #include <plat/gpio-cfg.h>
-#include <plat/iic.h>
-#include <plat/ts.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
 
 #include "common.h"
 

arch/arm/mach-s3c24xx/mach-h1940.c

@@ -56,8 +56,8 @@
 #include <mach/h1940.h>
 #include <mach/h1940-latch.h>
 #include <mach/fb.h>
-#include <plat/udc.h>
-#include <plat/iic.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/gpio-cfg.h>
 #include <plat/clock.h>
@@ -65,8 +65,8 @@
 #include <plat/cpu.h>
 #include <plat/pll.h>
 #include <plat/pm.h>
-#include <plat/mci.h>
-#include <plat/ts.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
 
 #include <sound/uda1380.h>
 

arch/arm/mach-s3c24xx/mach-jive.c

@@ -32,8 +32,8 @@
 #include <asm/mach/irq.h>
 
 #include <plat/regs-serial.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <mach/regs-power.h>
 #include <mach/regs-gpio.h>
@@ -54,7 +54,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/pm.h>
-#include <plat/udc.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
 
 static struct map_desc jive_iodesc[] __initdata = {
 };

arch/arm/mach-s3c24xx/mach-mini2440.c

@@ -39,14 +39,14 @@
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/irqs.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
-#include <plat/mci.h>
-#include <plat/udc.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>

arch/arm/mach-s3c24xx/mach-n30.c

@@ -33,7 +33,7 @@
 #include <asm/mach-types.h>
 
 #include <mach/fb.h>
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
@@ -41,15 +41,15 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
 
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/regs-serial.h>
 
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
-#include <plat/mci.h>
+#include <linux/platform_data/mmc-s3cmci.h>
 #include <plat/s3c2410.h>
-#include <plat/udc.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
 
 #include "common.h"
 

arch/arm/mach-s3c24xx/mach-nexcoder.c

@@ -38,7 +38,7 @@
 //#include <asm/debug-ll.h>
 #include <mach/regs-gpio.h>
 #include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/gpio-cfg.h>
 #include <plat/s3c2410.h>

arch/arm/mach-s3c24xx/mach-osiris.c

@@ -41,8 +41,8 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>

arch/arm/mach-s3c24xx/mach-otom.c

@@ -35,7 +35,7 @@
 #include <plat/s3c2410.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/cpu.h>
 
 #include "common.h"

arch/arm/mach-s3c24xx/mach-qt2410.c

@@ -47,13 +47,13 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
 #include <mach/regs-lcd.h>
 #include <plat/regs-serial.h>
 #include <mach/fb.h>
-#include <plat/nand.h>
-#include <plat/udc.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/common-smdk.h>
 #include <plat/gpio-cfg.h>

arch/arm/mach-s3c24xx/mach-rx1950.c

@@ -49,15 +49,15 @@
 #include <plat/clock.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-iic.h>
-#include <plat/mci.h>
-#include <plat/udc.h>
-#include <plat/nand.h>
-#include <plat/iic.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/pm.h>
 #include <plat/irq.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
 
 #include <sound/uda1380.h>
 

arch/arm/mach-s3c24xx/mach-rx3715.c

@@ -43,7 +43,7 @@
 #include <mach/regs-lcd.h>
 
 #include <mach/h1940.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <mach/fb.h>
 
 #include <plat/clock.h>

arch/arm/mach-s3c24xx/mach-smdk2410.c

@@ -47,7 +47,7 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/devs.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c24xx/mach-smdk2413.c

@@ -38,8 +38,8 @@
 #include <mach/regs-lcd.h>
 
 #include <mach/idle.h>
-#include <plat/udc.h>
-#include <plat/iic.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <mach/fb.h>
 
 #include <plat/s3c2410.h>

arch/arm/mach-s3c24xx/mach-smdk2416.c

@@ -39,17 +39,17 @@
 #include <mach/regs-s3c2443-clock.h>
 
 #include <mach/idle.h>
-#include <mach/leds-gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/leds-s3c24xx.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/s3c2416.h>
 #include <plat/gpio-cfg.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <plat/sdhci.h>
-#include <plat/udc.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
 #include <linux/platform_data/s3c-hsudc.h>
 
 #include <plat/regs-fb-v4.h>

arch/arm/mach-s3c24xx/mach-smdk2440.c

@@ -37,7 +37,7 @@
 
 #include <mach/idle.h>
 #include <mach/fb.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/s3c2410.h>
 #include <plat/s3c244x.h>

arch/arm/mach-s3c24xx/mach-smdk2443.c

@@ -37,7 +37,7 @@
 
 #include <mach/idle.h>
 #include <mach/fb.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/s3c2410.h>
 #include <plat/s3c2443.h>

arch/arm/mach-s3c24xx/mach-tct_hammer.c

@@ -45,7 +45,7 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 

arch/arm/mach-s3c24xx/mach-vr1000.c

@@ -43,13 +43,13 @@
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
 
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/iic.h>
-#include <plat/audio-simtec.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
 
 #include "simtec.h"
 #include "common.h"

arch/arm/mach-s3c24xx/mach-vstms.c

@@ -39,8 +39,8 @@
 #include <mach/idle.h>
 #include <mach/fb.h>
 
-#include <plat/iic.h>
-#include <plat/nand.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 
 #include <plat/s3c2410.h>
 #include <plat/s3c2412.h>

arch/arm/mach-s3c24xx/setup-i2c.c

@@ -16,7 +16,7 @@
 struct platform_device;
 
 #include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 

arch/arm/mach-s3c24xx/simtec-audio.c

@@ -24,7 +24,7 @@
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 
-#include <plat/audio-simtec.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
 #include <plat/devs.h>
 
 #include "simtec.h"

arch/arm/mach-s3c24xx/simtec-usb.c

@@ -34,7 +34,7 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 
-#include <plat/usb-control.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
 #include <plat/devs.h>
 
 #include "simtec.h"

arch/arm/mach-s3c64xx/dev-audio.c

@@ -20,7 +20,7 @@
 #include <mach/dma.h>
 
 #include <plat/devs.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
 #include <plat/gpio-cfg.h>
 
 static const char *rclksrc[] = {

arch/arm/mach-s3c64xx/mach-anw6410.c

@@ -42,7 +42,7 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/fb.h>
 #include <plat/regs-fb-v4.h>
 

arch/arm/mach-s3c64xx/mach-crag6410-module.c

@@ -24,7 +24,7 @@
 #include <sound/wm8962.h>
 #include <sound/wm9081.h>
 
-#include <plat/s3c64xx-spi.h>
+#include <linux/platform_data/spi-s3c64xx.h>
 
 #include <mach/crag6410.h>
 

arch/arm/mach-s3c64xx/mach-crag6410.c

@@ -61,14 +61,14 @@
 #include <plat/fb.h>
 #include <plat/sdhci.h>
 #include <plat/gpio-cfg.h>
-#include <plat/s3c64xx-spi.h>
+#include <linux/platform_data/spi-s3c64xx.h>
 
 #include <plat/keypad.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/adc.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/pm.h>
 
 #include "common.h"

arch/arm/mach-s3c64xx/mach-hmt.c

@@ -34,9 +34,9 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/fb.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 
 #include <plat/clock.h>
 #include <plat/devs.h>

arch/arm/mach-s3c64xx/mach-mini6410.c

@@ -38,9 +38,9 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/fb.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <plat/regs-serial.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
 #include <plat/regs-fb-v4.h>
 
 #include <video/platform_lcd.h>

arch/arm/mach-s3c64xx/mach-ncp.c

@@ -37,7 +37,7 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/fb.h>
 
 #include <plat/clock.h>

arch/arm/mach-s3c64xx/mach-real6410.c

@@ -39,9 +39,9 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/fb.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <plat/regs-serial.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
 #include <plat/regs-fb-v4.h>
 
 #include <video/platform_lcd.h>

arch/arm/mach-s3c64xx/mach-smartq.c

@@ -30,13 +30,13 @@
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
-#include <plat/hwmon.h>
+#include <linux/platform_data/hwmon-s3c.h>
 #include <plat/regs-serial.h>
-#include <plat/usb-control.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
 #include <plat/sdhci.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
 
 #include <video/platform_lcd.h>
 

arch/arm/mach-s3c64xx/mach-smdk6400.c

@@ -35,7 +35,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include "common.h"
 

arch/arm/mach-s3c64xx/mach-smdk6410.c

@@ -60,8 +60,8 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-sys.h>
 #include <mach/regs-srom.h>
-#include <plat/ata.h>
-#include <plat/iic.h>
+#include <linux/platform_data/ata-samsung_cf.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/fb.h>
 #include <plat/gpio-cfg.h>
 
@@ -69,7 +69,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/adc.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
 #include <plat/keypad.h>
 #include <plat/backlight.h>
 #include <plat/regs-fb-v4.h>

arch/arm/mach-s3c64xx/setup-i2c0.c

@@ -18,7 +18,7 @@
 
 struct platform_device; /* don't need the contents */
 
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)

arch/arm/mach-s3c64xx/setup-i2c1.c

@@ -18,7 +18,7 @@
 
 struct platform_device; /* don't need the contents */
 
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c1_cfg_gpio(struct platform_device *dev)

arch/arm/mach-s3c64xx/setup-ide.c

@@ -17,7 +17,7 @@
 #include <mach/map.h>
 #include <mach/regs-clock.h>
 #include <plat/gpio-cfg.h>
-#include <plat/ata.h>
+#include <linux/platform_data/ata-samsung_cf.h>
 
 void s3c64xx_ide_setup_gpio(void)
 {

arch/arm/mach-s5p64x0/dev-audio.c

@@ -13,7 +13,7 @@
 #include <linux/gpio.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
 
 #include <mach/map.h>
 #include <mach/dma.h>

arch/arm/mach-s5p64x0/mach-smdk6440.c

@@ -45,10 +45,10 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/pll.h>
 #include <plat/adc.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
 #include <plat/s5p-time.h>
 #include <plat/backlight.h>
 #include <plat/fb.h>

arch/arm/mach-s5p64x0/mach-smdk6450.c

@@ -45,10 +45,10 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/pll.h>
 #include <plat/adc.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
 #include <plat/s5p-time.h>
 #include <plat/backlight.h>
 #include <plat/fb.h>

arch/arm/mach-s5p64x0/setup-i2c0.c

@@ -19,7 +19,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <mach/i2c.h>
 

arch/arm/mach-s5p64x0/setup-i2c1.c

@@ -19,7 +19,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <plat/gpio-cfg.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 #include <mach/i2c.h>
 

arch/arm/mach-s5pc100/dev-audio.c

@@ -13,7 +13,7 @@
 #include <linux/gpio.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
 
 #include <mach/map.h>
 #include <mach/dma.h>

arch/arm/mach-s5pc100/mach-smdkc100.c

@@ -44,12 +44,12 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/fb.h>
-#include <plat/iic.h>
-#include <plat/ata.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/ata-samsung_cf.h>
 #include <plat/adc.h>
 #include <plat/keypad.h>
-#include <plat/ts.h>
-#include <plat/audio.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/asoc-s3c.h>
 #include <plat/backlight.h>
 #include <plat/regs-fb-v4.h>
 

arch/arm/mach-s5pc100/setup-i2c0.c

@@ -18,7 +18,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)

arch/arm/mach-s5pc100/setup-i2c1.c

@@ -18,7 +18,7 @@
 struct platform_device; /* don't need the contents */
 
 #include <linux/gpio.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c1_cfg_gpio(struct platform_device *dev)

arch/arm/mach-s5pv210/dev-audio.c

@@ -13,7 +13,7 @@
 #include <linux/gpio.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/audio.h>
+#include <linux/platform_data/asoc-s3c.h>
 
 #include <mach/map.h>
 #include <mach/dma.h>

arch/arm/mach-s5pv210/mach-goni.c

@@ -43,7 +43,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/fb.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/keypad.h>
 #include <plat/sdhci.h>
 #include <plat/clock.h>

arch/arm/mach-s5pv210/mach-smdkc110.c

@@ -27,8 +27,8 @@
 #include <plat/regs-serial.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/ata.h>
-#include <plat/iic.h>
+#include <linux/platform_data/ata-samsung_cf.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/pm.h>
 #include <plat/s5p-time.h>
 #include <plat/mfc.h>

arch/arm/mach-s5pv210/mach-smdkv210.c

@@ -38,9 +38,9 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/adc.h>
-#include <plat/ts.h>
-#include <plat/ata.h>
-#include <plat/iic.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/ata-samsung_cf.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/keypad.h>
 #include <plat/pm.h>
 #include <plat/fb.h>

arch/arm/mach-s5pv210/mach-torbreck.c

@@ -26,7 +26,7 @@
 #include <plat/regs-serial.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/s5p-time.h>
 
 #include "common.h"

arch/arm/mach-s5pv210/setup-i2c0.c

@@ -18,7 +18,7 @@
 
 struct platform_device; /* don't need the contents */
 
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)

arch/arm/mach-s5pv210/setup-i2c1.c

@@ -18,7 +18,7 @@
 
 struct platform_device; /* don't need the contents */
 
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c1_cfg_gpio(struct platform_device *dev)

arch/arm/mach-s5pv210/setup-i2c2.c

@@ -18,7 +18,7 @@
 
 struct platform_device; /* don't need the contents */
 
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/gpio-cfg.h>
 
 void s3c_i2c2_cfg_gpio(struct platform_device *dev)

arch/arm/plat-samsung/devs.c

@@ -46,24 +46,24 @@
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/adc.h>
-#include <plat/ata.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/ata-samsung_cf.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
 #include <plat/fb.h>
 #include <plat/fb-s3c2410.h>
-#include <plat/hwmon.h>
-#include <plat/iic.h>
+#include <linux/platform_data/hwmon-s3c.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/keypad.h>
-#include <plat/mci.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <plat/sdhci.h>
-#include <plat/ts.h>
-#include <plat/udc.h>
-#include <plat/usb-control.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
 #include <plat/usb-phy.h>
 #include <plat/regs-iic.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-spi.h>
-#include <plat/s3c64xx-spi.h>
+#include <linux/platform_data/spi-s3c64xx.h>
 
 static u64 samsung_device_dma_mask = DMA_BIT_MASK(32);
 

drivers/ata/pata_samsung_cf.c

@@ -23,7 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
-#include <plat/ata.h>
+#include <linux/platform_data/ata-samsung_cf.h>
 #include <plat/regs-ata.h>
 
 #define DRV_NAME "pata_samsung_cf"

drivers/hwmon/s3c-hwmon.c

@@ -34,7 +34,7 @@
 #include <linux/hwmon-sysfs.h>
 
 #include <plat/adc.h>
-#include <plat/hwmon.h>
+#include <linux/platform_data/hwmon-s3c.h>
 
 struct s3c_hwmon_attr {
 	struct sensor_device_attribute	in;

drivers/i2c/busses/i2c-s3c2410.c

@@ -42,7 +42,7 @@
 #include <asm/irq.h>
 
 #include <plat/regs-iic.h>
-#include <plat/iic.h>
+#include <linux/platform_data/i2c-s3c2410.h>
 
 /* Treat S3C2410 as baseline hardware, anything else is supported via quirks */
 #define QUIRK_S3C2440		(1 << 0)

drivers/input/touchscreen/s3c2410_ts.c

@@ -37,7 +37,7 @@
 
 #include <plat/adc.h>
 #include <plat/regs-adc.h>
-#include <plat/ts.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
 
 #define TSC_SLEEP  (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0))
 

drivers/leds/leds-s3c24xx.c

@@ -21,7 +21,7 @@
 
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
-#include <mach/leds-gpio.h>
+#include <linux/platform_data/leds-s3c24xx.h>
 
 /* our context */
 

drivers/media/video/s5p-fimc/mipi-csis.c

@@ -26,7 +26,7 @@
 #include <linux/spinlock.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-subdev.h>
-#include <plat/mipi_csis.h>
+#include <linux/platform_data/mipi-csis.h>
 #include "mipi-csis.h"
 
 static int debug;

drivers/mmc/host/s3cmci.c

@@ -27,7 +27,7 @@
 
 #include <mach/regs-sdi.h>
 
-#include <plat/mci.h>
+#include <linux/platform_data/mmc-s3cmci.h>
 
 #include "s3cmci.h"
 

drivers/mtd/nand/s3c2410.c

@@ -46,7 +46,7 @@
 #include <asm/io.h>
 
 #include <plat/regs-nand.h>
-#include <plat/nand.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 
 #ifdef CONFIG_MTD_NAND_S3C2410_HWECC
 static int hardware_ecc = 1;

drivers/spi/spi-s3c64xx.c

@@ -32,7 +32,7 @@
 #include <linux/of_gpio.h>
 
 #include <mach/dma.h>
-#include <plat/s3c64xx-spi.h>
+#include <linux/platform_data/spi-s3c64xx.h>
 
 #define MAX_SPI_PORTS		3
 

drivers/usb/gadget/s3c2410_udc.c

@@ -43,7 +43,7 @@
 #include <mach/hardware.h>
 
 #include <plat/regs-udc.h>
-#include <plat/udc.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
 
 
 #include "s3c2410_udc.h"

drivers/usb/host/ehci-s5p.c

@@ -16,7 +16,7 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/of_gpio.h>
-#include <plat/ehci.h>
+#include <linux/platform_data/usb-ehci-s5p.h>
 #include <plat/usb-phy.h>
 
 #define EHCI_INSNREG00(base)			(base + 0x90)

drivers/usb/host/ohci-exynos.c

@@ -14,7 +14,7 @@
 #include <linux/clk.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
-#include <mach/ohci.h>
+#include <linux/platform_data/usb-exynos.h>
 #include <plat/usb-phy.h>
 
 struct exynos_ohci_hcd {

drivers/usb/host/ohci-s3c2410.c

@@ -21,7 +21,7 @@
 
 #include <linux/platform_device.h>
 #include <linux/clk.h>
-#include <plat/usb-control.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
 
 #define valid_port(idx) ((idx) == 1 || (idx) == 2)