- 04 10月, 2006 1 次提交
-
-
由 Uwe Zeisberger 提交于
Many files include the filename at the beginning, serveral used a wrong one. Signed-off-by: NUwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 27 9月, 2006 5 次提交
-
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
The following change updates the Atlas interrupt handling to match that of Malta. Tested with a 5Kc and a 34Kf successfully. Signed-off-by: NMaciej W. Rozycki <macro@mips.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Alexander Bigga 提交于
I've encountered a serious problem with PCI config space access on Au1x000 platforms with recent 2.6.x-kernel. With 2.4.31 the same hardware works fine. So I was looking for the differences: Symptoms: - no PCI-device is seen on bootup though two or three cards are present - lspci output is empty - OR: lspci shows 20 times the same device (- OR: in some slot-configurations it worked anyhow) System(s): 1. platform with Au1500 and three PCI-devices (actually a mycable XXS1500 with backplane for three PCI-devices) 2. platform with Au1550 and two PCI-devices (custom board) Debugging: I digged down to the config_access() of the au1xxx-processors in arch/mips/pci/ops-au1000.c and switched on DEBUG. The code of config_access() seems to be almost the same as of the 2.4.x-kernel. But the "pci_cfg_vm->addr" returned by get_vm_area(0x2000, 0) once on booting is different. That's of course not forbidden. But the alignment seems to be wrong. In my case, I received: 2.4.31: pci_cfg_vm->addr = c0000000 2.6.18-rc5: pci_cfg_vm->addr = c0101000 To make it short: With 2.6.x it fails on the first config-access with: "PCI ERR detected: status 83a00356". Fixup: My fix is now, to use the VM_IOREMAP-flag in the get_vm_area call. This flag seems to be introduced in mm/vmalloc.c a long time ago (in 2.6.7-bk13, I found in gitweb). Now, the returned address is pci_cfg_vm->addr = c0104000 and everything works fine. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Yoichi Yuasa 提交于
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 14 7月, 2006 2 次提交
-
-
由 Yoichi Yuasa 提交于
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 01 7月, 2006 1 次提交
-
-
由 Jörn Engel 提交于
Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 30 6月, 2006 2 次提交
-
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 28 6月, 2006 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
Based on a patch series originally from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 20 6月, 2006 10 次提交
-
-
由 Ralf Baechle 提交于
Signed-off-by: NThomas Koeller <thomas.koeller@baslerweb.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 dmitry pervushin 提交于
Signed-off-by: Ndmitry pervushin <dpervushin@ru.mvista.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Bogendoerfer 提交于
Added support for RM200C machines with big endian firmware Added support for RM200-C40 (R5000 support) Signed-off-by: NFlorian Lohoff <flo@rfc822.org> Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
As warned several times before. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
As warned several times before. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Mark.Zhan 提交于
Support for the GT-64120-based Wind River 4KC PPMC Evaluation board. Signed-off-by: NRongkai.Zhan <Rongkai.zhan@windriver.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 21 3月, 2006 1 次提交
-
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 10 3月, 2006 1 次提交
-
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 07 2月, 2006 4 次提交
-
-
由 Peter Horton 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Mark Mason 提交于
Signed-off-by: NMark Mason <mason@broadcom.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Mark Mason 提交于
Make BCM1125 targets to link again. Signed-off-by: NMark Mason <mason@broadcom.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 10 1月, 2006 1 次提交
-
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 18 11月, 2005 3 次提交
-
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 30 10月, 2005 8 次提交
-
-
由 Andrew Isaacson 提交于
CFE 1.2.5 and earlier fails to turn on the ExpMemEn bit in the PCIFeatureControl register, which means that DMA does not work beyond physical address 01_0000_0000, ergo to DRAM beyond 1GB. With ExpMemEn turned on, 01_0000_0000-0f_ffff_ffff is mapped, so DMA works for up to 61 GB of DRAM. Will be fixed in CFE 1.2.6 (yet to be released). Signed-Off-By: NAndy Isaacson <adi@broadcom.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Andrew Isaacson 提交于
PCI support code for PLX 7250 PCI-X tunnel on BCM91480B BigSur board. Signed-Off-By: NAndy Isaacson <adi@broadcom.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Andrew Isaacson 提交于
Signed-Off-By: NAndy Isaacson <adi@broadcom.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Pete Popov 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
resources. We tried previous but ran into problems ... Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-