Trigger BUG_ON if a group name is longer than GENL_NAMSIZ.
Signed-off-by: NMasatake YAMATO <yamato@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
The following patchset contains 7 Netfilter/IPVS fixes for 3.9-rc, they are:

* Restrict IPv6 stateless NPT targets to the mangle table. Many users are
  complaining that this target does not work in the nat table, which is the
  wrong table for it, from Florian Westphal.

* Fix possible use before initialization in the netns init path of several
  conntrack protocol trackers (introduced recently while improving conntrack
  netns support), from Gao Feng.

* Fix incorrect initialization of copy_range in nfnetlink_queue, spotted
  by Eric Dumazet during the NFWS2013, patch from myself.

* Fix wrong calculation of next SCTP chunk in IPVS, from Julian Anastasov.

* Remove rcu_read_lock section in IPVS while calling ipv4_update_pmtu
  not required anymore after change introduced in 3.7, again from Julian.

* Fix SYN looping in IPVS state sync if the backup is used a real server
  in DR/TUN modes, this required a new /proc entry to disable the director
  function when acting as backup, also from Julian.

* Remove leftover IP_NF_QUEUE Kconfig after ip_queue removal, noted by
  Paul Bolle.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Kconfig symbol IP_NF_QUEUE is unused since commit
d16cf20e ("netfilter: remove ip_queue
support"). Let's remove it too.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Pull XFS fixes from Ben Myers:

 - Fix for a potential infinite loop which was introduced in commit
   4d559a3b ("xfs: limit speculative prealloc near ENOSPC
   thresholds")

 - Fix for the return type of xfs_iomap_eof_prealloc_initial_size from
   commit a1e16c26 ("xfs: limit speculative prealloc size on sparse
   files")

 - Fix for a failed buffer readahead causing subsequent callers to fail
   incorrectly

* tag 'for-linus-v3.9-rc4' of git://oss.sgi.com/xfs/xfs:
  xfs: ensure we capture IO errors correctly
  xfs: fix xfs_iomap_eof_prealloc_initial_size type
  xfs: fix potential infinite loop in xfs_iomap_prealloc_size()

Mantas Mikulėnas reported that his graphics hardware failed to
initialise after commit f9a37be0 ("x86: Use PCI setup data").

The aim of this commit was to ensure that ROM images were available on
some Apple systems that don't expose the GPU ROM via any other source.
In this case, UEFI appears to have provided a broken ROM image that we
were using even though there was a perfectly valid ROM available via
other sources.  The simplest way to handle this seems to be to just
re-order pci_map_rom() and leave any firmare-supplied ROM to last.
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
Tested-by: NMantas Mikulėnas <grawity@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull sparc fixes from David Miller:
 "Just some minor fixups, a sunsu console setup panic cure, and
  recognition of a Fujitsu sun4v cpu."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: remove unused "config BITS"
  sparc: delete "if !ULTRA_HAS_POPULATION_COUNT"
  sparc64: correctly recognize SPARC64-X chips
  sparc,leon: fix GRPCI2 device0 PCI config space access
  sunsu: Fix panic in case of nonexistent port at "console=ttySY" cmdline option

Pull arm64 fixes from Catalin Marinas:

 - Fix !SMP build error.

 - Fix padding computation in struct ucontext (no ABI change).

 - Minor clean-up after the signal patches (unused var).

 - Two old Kconfig options clean-up.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
  arm64: Kconfig.debug: Remove unused CONFIG_DEBUG_ERRORS
  arm64: Do not select GENERIC_HARDIRQS_NO_DEPRECATED
  arm64: fix padding computation in struct ucontext
  arm64: Fix build error with !SMP
  arm64: Removed unused variable in compat_setup_rt_frame()

sparc's asm/module.h got removed in commit
786d35d4 ("Make most arch asm/module.h
files use asm-generic/module.h"). That removed the only two uses of this
Kconfig symbol. So we can remove its entry too.

> >From arch/sparc/Makefile:
>     ifeq ($(CONFIG_SPARC32),y)
>     [...]
>
>     [...]
>     export BITS    := 32
>     [...]
>
>     else
>     [...]
>
>     [...]
>     export BITS   := 64
>     [...]
>
> So $(BITS) is set depending on whether CONFIG_SPARC32 is set or not.
> Using $(BITS) in sparc's Makefiles is not using CONFIG_BITS. That
> doesn't count as usage of "config BITS".
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Fix ARM BPF JIT handling of negative 'k' values, from Chen Gang.

 2) Insufficient space reserved for bridge netlink values, fix from
    Stephen Hemminger.

 3) Some dst_neigh_lookup*() callers don't interpret error pointer
    correctly, fix from Zhouyi Zhou.

 4) Fix transport match in SCTP active_path loops, from Xugeng Zhang.

 5) Fix qeth driver handling of multi-order SKB frags, from Frank
    Blaschka.

 6) fec driver is missing napi_disable() call, resulting in crashes on
    unload, from Georg Hofmann.

 7) Don't try to handle PMTU events on a listening socket, fix from Eric
    Dumazet.

 8) Fix timestamp location calculations in IP option processing, from
    David Ward.

 9) FIB_TABLE_HASHSZ setting is not controlled by the correct kconfig
    tests, from Denis V Lunev.

10) Fix TX descriptor push handling in SFC driver, from Ben Hutchings.

11) Fix isdn/hisax and tulip/de4x5 kconfig dependencies, from Arnd
    Bergmann.

12) bnx2x statistics don't handle 4GB rollover correctly, fix from
    Maciej Żenczykowski.

13) Openvswitch bug fixes for vport del/new error reporting, missing
    genlmsg_end() call in netlink processing, and mis-parsing of
    LLC/SNAP ethernet types.  From Rich Lane.

14) SKB pfmemalloc state should only be propagated from the head page of
    a compound page, fix from Pavel Emelyanov.

15) Fix link handling in tg3 driver for 5715 chips when autonegotation
    is disabled.  From Nithin Sujir.

16) Fix inverted test of cpdma_check_free_tx_desc return value in
    davinci_emac driver, from Mugunthan V N.

17) vlan_depth is incorrectly calculated in skb_network_protocol(), from
    Li RongQing.

18) Fix probing of Gobi 1K devices in qmi_wwan driver, and fix NCM
    device mode backwards compat in cdc_ncm driver.  From Bjørn Mork.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
  inet: limit length of fragment queue hash table bucket lists
  qeth: Fix scatter-gather regression
  qeth: Fix invalid router settings handling
  qeth: delay feature trace
  tcp: dont handle MTU reduction on LISTEN socket
  bnx2x: fix occasional statistics off-by-4GB error
  vhost/net: fix heads usage of ubuf_info
  bridge: Add support for setting BR_ROOT_BLOCK flag.
  bnx2x: add missing napi deletion in error path
  drivers: net: ethernet: ti: davinci_emac: fix usage of cpdma_check_free_tx_desc()
  ethernet/tulip: DE4x5 needs VIRT_TO_BUS
  isdn: hisax: netjet requires VIRT_TO_BUS
  net: cdc_ncm, cdc_mbim: allow user to prefer NCM for backwards compatibility
  rtnetlink: Mask the rta_type when range checking
  Revert "ip_gre: make ipgre_tunnel_xmit() not parse network header as IP unconditionally"
  Fix dst_neigh_lookup/dst_neigh_lookup_skb return value handling bug
  smsc75xx: configuration help incorrectly mentions smsc95xx
  net: fec: fix missing napi_disable call
  net: fec: restart the FEC when PHY speed changes
  skb: Propagate pfmemalloc on skb from head page only
  ...

Commit 2d78d4be ("[PATCH] bitops:
sparc64: use generic bitops") made the default of GENERIC_HWEIGHT depend
on !ULTRA_HAS_POPULATION_COUNT. But since there's no Kconfig symbol with
that name, this always evaluates to true. Delete this dependency.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Kconfig entry for DEBUG_ERRORS is a verbatim copy of the former arm
entry for that symbol. It got removed in v2.6.39 because it wasn't
actually used anywhere. There are still no users of DEBUG_ERRORS so
remove this entry too.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
[catalin.marinas@arm.com: removed option from defconfig]
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Config option GENERIC_HARDIRQS_NO_DEPRECATED was removed in commit
78c89825 ("genirq: Remove the now obsolete
config options and select statements"), but the select was accidentally
reintroduced in commit 8c2c3df3 ("arm64:
Build infrastructure").
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

This patch introduces a constant limit of the fragment queue hash
table bucket list lengths. Currently the limit 128 is choosen somewhat
arbitrary and just ensures that we can fill up the fragment cache with
empty packets up to the default ip_frag_high_thresh limits. It should
just protect from list iteration eating considerable amounts of cpu.

If we reach the maximum length in one hash bucket a warning is printed.
This is implemented on the caller side of inet_frag_find to distinguish
between the different users of inet_fragment.c.

I dropped the out of memory warning in the ipv4 fragment lookup path,
because we already get a warning by the slab allocator.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jesper Dangaard Brouer <jbrouer@redhat.com>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes a scatter-gather regression introduced with

commit 5640f768 net: use a per task frag allocator

Now the qeth driver can cope with bigger framents and split a fragment in
sub framents if required.
Signed-off-by: NFrank Blaschka <blaschka@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Give a bad return code when specifying a router setting that is either
invalid or not support on the respective device type. In addition, fall back
the previous setting instead of silently switching back to 'no routing'.
Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: NFrank Blaschka <blaschka@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Delay tracing of the card features until the optional commands have been
enabled.
Signed-off-by: NStefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: NFrank Blaschka <blaschka@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In 3.7 we added code that uses ipv4_update_pmtu but after commit
c5ae7d41 (ipv4: must use rcu protection while calling fib_lookup)
the RCU lock is not needed.
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NSimon Horman <horms@verge.net.au>

Dmitry Akindinov is reporting for a problem where SYNs are looping
between the master and backup server when the backup server is used as
real server in DR mode and has IPVS rules to function as director.

Even when the backup function is enabled we continue to forward
traffic and schedule new connections when the current master is using
the backup server as real server. While this is not a problem for NAT,
for DR and TUN method the backup server can not determine if a request
comes from client or from director.

To avoid such loops add new sysctl flag backup_only. It can be needed
for DR/TUN setups that do not need backup and director function at the
same time. When the backup function is enabled we stop any forwarding
and pass the traffic to the local stack (real server mode). The flag
disables the director function when the backup function is enabled.

For setups that enable backup function for some virtual services and
director function for other virtual services there should be another
more complex solution to support DR/TUN mode, may be to assign
per-virtual service syncid value, so that we can differentiate the
requests.
Reported-by: NDmitry Akindinov <dimak@stalker.com>
Tested-by: NGerman Myzovsky <lawyer@sipnet.ru>
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NSimon Horman <horms@verge.net.au>

Pull hwmon fixes from Jean Delvare.

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (lm75) Fix tcn75 prefix
  hwmon: (lm75.h) Update header inclusion
  MAINTAINERS: Remove Mark M. Hoffman

Somehow the driver snuck in with these still in it.
Signed-off-by: NBen Collins <ben.c@servergy.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull workqueue fix from Tejun Heo:
 "Lai's patch to fix highly unlikely but still possible workqueue stall
  during CPU hotunplug."

* 'for-3.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: fix possible pool stall bug in wq_unbind_fn()

Fix wrong but non-fatal access to chunk length.
sch->length should be in network order, next chunk should
be aligned to 4 bytes. Problem noticed in sparse output.
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NSimon Horman <horms@verge.net.au>

The TCN75 has its own prefix for a long time now.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>

File lm75.h used to include <linux/hwmon.h> for SENSORS_LIMIT() but
this function is gone by now. Instead we call clamp_val() so we should
include <linux/kernel.h>, where this function is declared.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>

Mark M. Hoffman stopped working on the Linux kernel several years
ago, so he should no longer be listed as a driver maintainer. I'm not
even sure if his e-mail address still works.

I can take over 3 drivers he was responsible for, the 4th one will
fall down to the subsystem maintainer.

Also give Mark credit for all the good work he did.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Acked-by: NGuenter Roeck <linux@roeck-us.net>
Cc: Wolfram Sang <wolfram@the-dreams.de>

Failed buffer readahead can leave the buffer in the cache marked
with an error. Most callers that then issue a subsequent read on the
buffer do not zero the b_error field out, and so we may incorectly
detect an error during IO completion due to the stale error value
left on the buffer.

Avoid this problem by zeroing the error before IO submission. This
ensures that the only IO errors that are detected those captured
from are those captured from bio submission or completion.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NMark Tinguely <tinguely@sgi.com>
Signed-off-by: NBen Myers <bpm@sgi.com>

(cherry picked from commit c163f9a1)

Fix the return type of xfs_iomap_eof_prealloc_initial_size() to
xfs_fsblock_t to reflect the fact that the return value may be an
unsigned 64 bits if XFS_BIG_BLKNOS is defined.
Signed-off-by: NMark Tinguely <tinguely@sgi.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NBen Myers <bpm@sgi.com>

(cherry picked from commit e8108ced)

If freesp == 0, we could end up in an infinite loop while squashing
the preallocation. Break the loop when we've killed the prealloc
entirely.
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NBen Myers <bpm@sgi.com>

(cherry picked from commit e78c420b)

When an ICMP ICMP_FRAG_NEEDED (or ICMPV6_PKT_TOOBIG) message finds a
LISTEN socket, and this socket is currently owned by the user, we
set TCP_MTU_REDUCED_DEFERRED flag in listener tsq_flags.

This is bad because if we clone the parent before it had a chance to
clear the flag, the child inherits the tsq_flags value, and next
tcp_release_cb() on the child will decrement sk_refcnt.

Result is that we might free a live TCP socket, as reported by
Dormando.

IPv4: Attempt to release TCP socket in state 1

Fix this issue by testing sk_state against TCP_LISTEN early, so that we
set TCP_MTU_REDUCED_DEFERRED on appropriate sockets (not a LISTEN one)

This bug was introduced in commit 563d34d0
(tcp: dont drop MTU reduction indications)
Reported-by: Ndormando <dormando@rydia.net>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The UPDATE_QSTAT function introduced on February 15, 2012
in commit 1355b704 "bnx2x: consistent statistics after
internal driver reload" incorrectly fails to handle overflow
during addition of the lower 32-bit field of a stat.

This bug is present since 3.4-rc1 and should thus be considered
a candidate for stable 3.4+ releases.

Google-Bug-Id: 8374428
Signed-off-by: NMaciej Żenczykowski <maze@google.com>
Cc: Mintz Yuval <yuvalmin@broadcom.com>
Acked-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull MTD fixes from David Woodhouse:
 "This fixes a couple of problems.  Firstly, some people are actually
  still using old small-page flash and we broke it by removing the ready
  check.

  Secondly.  fix the handling of partitions on Broadcom 47xx devices.
  Recent changes had made it misdetect the location of the NVRAM and
  scribble over the bootloader when it tried to update the variables
  there.  With predictably sad results."

* tag 'for-linus-20130318' of git://git.infradead.org/linux-mtd:
  mtd: nand: reintroduce NAND_NO_READRDY as NAND_NEED_READRDY
  mtd: bcm47xxpart: look for NVRAM at the end of device
  Revert "mtd: bcm47xxpart: improve probing of nvram partition"

Pull selinux bugfix from James Morris.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  selinux: use GFP_ATOMIC under spin_lock

Pull s390 fixes from Martin Schwidefsky:
 "A couple of bug fixes, the most hairy on is the flush_tlb_kernel_range
  fix.  Another case of "how could this ever have worked?"."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/kdump: Do not add standby memory for kdump
  drivers/i2c: remove !S390 dependency, add missing GENERIC_HARDIRQS dependencies
  s390/scm: process availability
  s390/scm_blk: suspend writes
  s390/scm_drv: extend notify callback
  s390/scm_blk: fix request number accounting
  s390/mm: fix flush_tlb_kernel_range()
  s390/mm: fix vmemmap size calculation
  s390: critical section cleanup vs. machine checks

Pull ARM SoC bug fixes from Arnd Bergmann:
 "Things are calming down for arm-soc as well.  This set of bug fixes is
  dominated in size by the at91 platform bug fixes.  Some of them were
  meant to go through the framebuffer tree during the merge window, but
  since the framebuffer maintainer could not be reached, I offered to
  take them here.  The other notable at91 change is the addition of
  pinctrl definitions to fix the NAND controller.

  The rest are mostly simple regression fixes:

   - Our removal of VIRT_TO_BUS conflicted with Stephen Rothwell's
     renaming of the Kconfig symbol.  You will get a trivial merge
     conflict here, we still want to remove it.
   - missing bits for clocks on imx and s5pv210
   - missing header inclusions in mmp and shmobile
   - typos in s5pv210 camera and vt8500 clock support code

  and three trivial fixes for pre-3.8 bugs:

   - an old bogus build warning in the joystick driver
   - a misleading Kconfig description
   - a NULL pointer check on davinci"

* tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: fix CONFIG_VIRT_TO_BUS handling
  ARM: i.MX35: enable MAX clock
  ARM: Scorpion is a v7 architecture, not v6
  ARM: mmp: add platform_device head file in gplugd
  input/joystick: use get_cycles on ARM
  [media] s5p-fimc: fix s5pv210 build
  clk: vt8500: Fix "fix device clock divisor calculations"
  ARM: i.MX25: Fix DT compilation
  ARM: at91: fix infinite loop in at91_irq_suspend/resume
  ARM: at91: add gpio suspend/resume support when using pinctrl
  ARM: at91: fix LCD-wiring mode
  atmel_lcdfb: fix 16-bpp modes on older SOCs
  ARM: at91: dt: at91sam9x5: complete NAND pinctrl
  ARM: at91: dt: at91sam9x5: correct NAND pins comments
  ARM: davinci: edma: fix dmaengine induced null pointer dereference on da830
  ARM: shmobile: marzen: Include mmc/host.h
  ARM: EXYNOS: Add #dma-cells for generic dma binding support for PL330
  ARM: S5PV210: Fix PL330 DMA controller clkdev entries

Pull powerpc fixes from Ben Herrenschmidt:
 "Here's a few powerpc fixes for 3.9, mostly regressions (though not all
  from 3.9 merge window) that we've been hammering into shape over the
  last couple of weeks.  They fix booting on Cell and G5 among other
  things (yes, we've been a bit sloppy with older machines this time
  around)."

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Rename USER_ESID_BITS* to ESID_BITS*
  powerpc: Update kernel VSID range
  powerpc: Make VSID_BITS* dependency explicit
  powerpc: Make sure that we alays include CONFIG_BINFMT_ELF
  powerpc/ptrace: Fix brk.len used uninitialised
  powerpc: Fix -mcmodel=medium breakage in prom_init.c
  powerpc: Remove last traces of POWER4_ONLY
  powerpc: Fix cputable entry for 970MP rev 1.0
  powerpc: Fix STAB initialization

Pull ARM fixes from Russell King:
 "Just three fixes this time - a fix for a fix for our memset function,
  fixing the dummy clockevent so that it doesn't interfere with real
  hardware clockevents, and fixing a build error for Tegra."

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7675/1: amba: tegra-ahb: Fix build error w/ PM_SLEEP w/o PM_RUNTIME
  ARM: 7674/1: smp: Avoid dummy clockevent being preferred over real hardware clock-event
  ARM: 7670/1: fix the memset fix

887cbce0 "arch Kconfig: centralise CONFIG_ARCH_NO_VIRT_TO_BUS"
and  4febd95a "Select VIRT_TO_BUS directly where needed" from
Stephen Rothwell changed globally how CONFIG_VIRT_TO_BUS is
selected, while my own a5d533ee "ARM: disable virt_to_bus/
virt_to_bus almost everywhere" was merged at the same time and
changed which platforms select it on ARM.

The result of this conflict was that we again see CONFIG_VIRT_TO_BUS
on all ARM systems. This patch fixes up the problem and removes
CONFIG_ARCH_NO_VIRT_TO_BUS again on ARM.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>

The call tree here is:

sk_clone_lock()              <- takes bh_lock_sock(newsk);
xfrm_sk_clone_policy()
__xfrm_sk_clone_policy()
clone_policy()               <- uses GFP_ATOMIC for allocations
security_xfrm_policy_clone()
security_ops->xfrm_policy_clone_security()
selinux_xfrm_policy_clone()
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Signed-off-by: NJames Morris <james.l.morris@oracle.com>

Merge tag 'renesas-fixes-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes

From Simon Horman <horms@verge.net.au>:

Resolve a build failure present since v3.9-rc1

* tag 'renesas-fixes-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: marzen: Include mmc/host.h
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

The expression to compute the padding needed to fill the uc_sigmask field
to 1024 bits actually computes the padding needed for 1080 bits.
Fortunately, due to the 16-byte alignment of the following field
(uc_mcontext) the definition in glibc contains enough bytes of padding
after uc_sigmask so that the overall offsets and size match in both
definitions.
Signed-off-by: NAndreas Schwab <schwab@suse.de>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>