提交 991657a3 编写于 作者: L Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 fixes from Martin Schwidefsky:
 "A couple of bug fixes, the most hairy on is the flush_tlb_kernel_range
  fix.  Another case of "how could this ever have worked?"."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/kdump: Do not add standby memory for kdump
  drivers/i2c: remove !S390 dependency, add missing GENERIC_HARDIRQS dependencies
  s390/scm: process availability
  s390/scm_blk: suspend writes
  s390/scm_drv: extend notify callback
  s390/scm_blk: fix request number accounting
  s390/mm: fix flush_tlb_kernel_range()
  s390/mm: fix vmemmap size calculation
  s390: critical section cleanup vs. machine checks
......@@ -34,6 +34,8 @@ struct arsb {
u32 reserved[4];
} __packed;
#define EQC_WR_PROHIBIT 22
struct msb {
u8 fmt:4;
u8 oc:4;
......@@ -96,11 +98,13 @@ struct scm_device {
#define OP_STATE_TEMP_ERR 2
#define OP_STATE_PERM_ERR 3
enum scm_event {SCM_CHANGE, SCM_AVAIL};
struct scm_driver {
struct device_driver drv;
int (*probe) (struct scm_device *scmdev);
int (*remove) (struct scm_device *scmdev);
void (*notify) (struct scm_device *scmdev);
void (*notify) (struct scm_device *scmdev, enum scm_event event);
void (*handler) (struct scm_device *scmdev, void *data, int error);
};
......
......@@ -74,8 +74,6 @@ static inline void __tlb_flush_idte(unsigned long asce)
static inline void __tlb_flush_mm(struct mm_struct * mm)
{
if (unlikely(cpumask_empty(mm_cpumask(mm))))
return;
/*
* If the machine has IDTE we prefer to do a per mm flush
* on all cpus instead of doing a local flush if the mm
......
......@@ -636,7 +636,8 @@ ENTRY(mcck_int_handler)
UPDATE_VTIME %r14,%r15,__LC_MCCK_ENTER_TIMER
mcck_skip:
SWITCH_ASYNC __LC_GPREGS_SAVE_AREA+32,__LC_PANIC_STACK,PAGE_SHIFT
mvc __PT_R0(64,%r11),__LC_GPREGS_SAVE_AREA
stm %r0,%r7,__PT_R0(%r11)
mvc __PT_R8(32,%r11),__LC_GPREGS_SAVE_AREA+32
stm %r8,%r9,__PT_PSW(%r11)
xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15)
l %r1,BASED(.Ldo_machine_check)
......
......@@ -678,8 +678,9 @@ ENTRY(mcck_int_handler)
UPDATE_VTIME %r14,__LC_MCCK_ENTER_TIMER
LAST_BREAK %r14
mcck_skip:
lghi %r14,__LC_GPREGS_SAVE_AREA
mvc __PT_R0(128,%r11),0(%r14)
lghi %r14,__LC_GPREGS_SAVE_AREA+64
stmg %r0,%r7,__PT_R0(%r11)
mvc __PT_R8(64,%r11),0(%r14)
stmg %r8,%r9,__PT_PSW(%r11)
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
lgr %r2,%r11 # pass pointer to pt_regs
......
......@@ -571,6 +571,8 @@ static void __init setup_memory_end(void)
/* Split remaining virtual space between 1:1 mapping & vmemmap array */
tmp = VMALLOC_START / (PAGE_SIZE + sizeof(struct page));
/* vmemmap contains a multiple of PAGES_PER_SECTION struct pages */
tmp = SECTION_ALIGN_UP(tmp);
tmp = VMALLOC_START - tmp * sizeof(struct page);
tmp &= ~((vmax >> 11) - 1); /* align to page table level */
tmp = min(tmp, 1UL << MAX_PHYSMEM_BITS);
......
......@@ -4,7 +4,6 @@
menuconfig I2C
tristate "I2C support"
depends on !S390
select RT_MUTEXES
---help---
I2C (pronounce: I-squared-C) is a slow serial bus protocol used in
......@@ -76,6 +75,7 @@ config I2C_HELPER_AUTO
config I2C_SMBUS
tristate "SMBus-specific protocols" if !I2C_HELPER_AUTO
depends on GENERIC_HARDIRQS
help
Say Y here if you want support for SMBus extensions to the I2C
specification. At the moment, the only supported extension is
......
......@@ -114,7 +114,7 @@ config I2C_I801
config I2C_ISCH
tristate "Intel SCH SMBus 1.0"
depends on PCI
depends on PCI && GENERIC_HARDIRQS
select LPC_SCH
help
Say Y here if you want to use SMBus controller on the Intel SCH
......@@ -543,6 +543,7 @@ config I2C_NUC900
config I2C_OCORES
tristate "OpenCores I2C Controller"
depends on GENERIC_HARDIRQS
help
If you say yes to this option, support will be included for the
OpenCores I2C controller. For details see
......@@ -777,7 +778,7 @@ config I2C_DIOLAN_U2C
config I2C_PARPORT
tristate "Parallel port adapter"
depends on PARPORT
depends on PARPORT && GENERIC_HARDIRQS
select I2C_ALGOBIT
select I2C_SMBUS
help
......@@ -802,6 +803,7 @@ config I2C_PARPORT
config I2C_PARPORT_LIGHT
tristate "Parallel port adapter (light)"
depends on GENERIC_HARDIRQS
select I2C_ALGOBIT
select I2C_SMBUS
help
......
......@@ -135,6 +135,11 @@ static const struct block_device_operations scm_blk_devops = {
.release = scm_release,
};
static bool scm_permit_request(struct scm_blk_dev *bdev, struct request *req)
{
return rq_data_dir(req) != WRITE || bdev->state != SCM_WR_PROHIBIT;
}
static void scm_request_prepare(struct scm_request *scmrq)
{
struct scm_blk_dev *bdev = scmrq->bdev;
......@@ -195,14 +200,18 @@ void scm_request_requeue(struct scm_request *scmrq)
scm_release_cluster(scmrq);
blk_requeue_request(bdev->rq, scmrq->request);
atomic_dec(&bdev->queued_reqs);
scm_request_done(scmrq);
scm_ensure_queue_restart(bdev);
}
void scm_request_finish(struct scm_request *scmrq)
{
struct scm_blk_dev *bdev = scmrq->bdev;
scm_release_cluster(scmrq);
blk_end_request_all(scmrq->request, scmrq->error);
atomic_dec(&bdev->queued_reqs);
scm_request_done(scmrq);
}
......@@ -218,6 +227,10 @@ static void scm_blk_request(struct request_queue *rq)
if (req->cmd_type != REQ_TYPE_FS)
continue;
if (!scm_permit_request(bdev, req)) {
scm_ensure_queue_restart(bdev);
return;
}
scmrq = scm_request_fetch();
if (!scmrq) {
SCM_LOG(5, "no request");
......@@ -231,11 +244,13 @@ static void scm_blk_request(struct request_queue *rq)
return;
}
if (scm_need_cluster_request(scmrq)) {
atomic_inc(&bdev->queued_reqs);
blk_start_request(req);
scm_initiate_cluster_request(scmrq);
return;
}
scm_request_prepare(scmrq);
atomic_inc(&bdev->queued_reqs);
blk_start_request(req);
ret = scm_start_aob(scmrq->aob);
......@@ -244,7 +259,6 @@ static void scm_blk_request(struct request_queue *rq)
scm_request_requeue(scmrq);
return;
}
atomic_inc(&bdev->queued_reqs);
}
}
......@@ -280,6 +294,38 @@ void scm_blk_irq(struct scm_device *scmdev, void *data, int error)
tasklet_hi_schedule(&bdev->tasklet);
}
static void scm_blk_handle_error(struct scm_request *scmrq)
{
struct scm_blk_dev *bdev = scmrq->bdev;
unsigned long flags;
if (scmrq->error != -EIO)
goto restart;
/* For -EIO the response block is valid. */
switch (scmrq->aob->response.eqc) {
case EQC_WR_PROHIBIT:
spin_lock_irqsave(&bdev->lock, flags);
if (bdev->state != SCM_WR_PROHIBIT)
pr_info("%lu: Write access to the SCM increment is suspended\n",
(unsigned long) bdev->scmdev->address);
bdev->state = SCM_WR_PROHIBIT;
spin_unlock_irqrestore(&bdev->lock, flags);
goto requeue;
default:
break;
}
restart:
if (!scm_start_aob(scmrq->aob))
return;
requeue:
spin_lock_irqsave(&bdev->rq_lock, flags);
scm_request_requeue(scmrq);
spin_unlock_irqrestore(&bdev->rq_lock, flags);
}
static void scm_blk_tasklet(struct scm_blk_dev *bdev)
{
struct scm_request *scmrq;
......@@ -293,11 +339,8 @@ static void scm_blk_tasklet(struct scm_blk_dev *bdev)
spin_unlock_irqrestore(&bdev->lock, flags);
if (scmrq->error && scmrq->retries-- > 0) {
if (scm_start_aob(scmrq->aob)) {
spin_lock_irqsave(&bdev->rq_lock, flags);
scm_request_requeue(scmrq);
spin_unlock_irqrestore(&bdev->rq_lock, flags);
}
scm_blk_handle_error(scmrq);
/* Request restarted or requeued, handle next. */
spin_lock_irqsave(&bdev->lock, flags);
continue;
......@@ -310,7 +353,6 @@ static void scm_blk_tasklet(struct scm_blk_dev *bdev)
}
scm_request_finish(scmrq);
atomic_dec(&bdev->queued_reqs);
spin_lock_irqsave(&bdev->lock, flags);
}
spin_unlock_irqrestore(&bdev->lock, flags);
......@@ -332,6 +374,7 @@ int scm_blk_dev_setup(struct scm_blk_dev *bdev, struct scm_device *scmdev)
}
bdev->scmdev = scmdev;
bdev->state = SCM_OPER;
spin_lock_init(&bdev->rq_lock);
spin_lock_init(&bdev->lock);
INIT_LIST_HEAD(&bdev->finished_requests);
......@@ -396,6 +439,18 @@ void scm_blk_dev_cleanup(struct scm_blk_dev *bdev)
put_disk(bdev->gendisk);
}
void scm_blk_set_available(struct scm_blk_dev *bdev)
{
unsigned long flags;
spin_lock_irqsave(&bdev->lock, flags);
if (bdev->state == SCM_WR_PROHIBIT)
pr_info("%lu: Write access to the SCM increment is restored\n",
(unsigned long) bdev->scmdev->address);
bdev->state = SCM_OPER;
spin_unlock_irqrestore(&bdev->lock, flags);
}
static int __init scm_blk_init(void)
{
int ret = -EINVAL;
......
......@@ -21,6 +21,7 @@ struct scm_blk_dev {
spinlock_t rq_lock; /* guard the request queue */
spinlock_t lock; /* guard the rest of the blockdev */
atomic_t queued_reqs;
enum {SCM_OPER, SCM_WR_PROHIBIT} state;
struct list_head finished_requests;
#ifdef CONFIG_SCM_BLOCK_CLUSTER_WRITE
struct list_head cluster_list;
......@@ -48,6 +49,7 @@ struct scm_request {
int scm_blk_dev_setup(struct scm_blk_dev *, struct scm_device *);
void scm_blk_dev_cleanup(struct scm_blk_dev *);
void scm_blk_set_available(struct scm_blk_dev *);
void scm_blk_irq(struct scm_device *, void *, int);
void scm_request_finish(struct scm_request *);
......
......@@ -13,12 +13,23 @@
#include <asm/eadm.h>
#include "scm_blk.h"
static void notify(struct scm_device *scmdev)
static void scm_notify(struct scm_device *scmdev, enum scm_event event)
{
pr_info("%lu: The capabilities of the SCM increment changed\n",
(unsigned long) scmdev->address);
SCM_LOG(2, "State changed");
SCM_LOG_STATE(2, scmdev);
struct scm_blk_dev *bdev = dev_get_drvdata(&scmdev->dev);
switch (event) {
case SCM_CHANGE:
pr_info("%lu: The capabilities of the SCM increment changed\n",
(unsigned long) scmdev->address);
SCM_LOG(2, "State changed");
SCM_LOG_STATE(2, scmdev);
break;
case SCM_AVAIL:
SCM_LOG(2, "Increment available");
SCM_LOG_STATE(2, scmdev);
scm_blk_set_available(bdev);
break;
}
}
static int scm_probe(struct scm_device *scmdev)
......@@ -64,7 +75,7 @@ static struct scm_driver scm_drv = {
.name = "scm_block",
.owner = THIS_MODULE,
},
.notify = notify,
.notify = scm_notify,
.probe = scm_probe,
.remove = scm_remove,
.handler = scm_blk_irq,
......
......@@ -627,6 +627,8 @@ static int __init sclp_detect_standby_memory(void)
struct read_storage_sccb *sccb;
int i, id, assigned, rc;
if (OLDMEM_BASE) /* No standby memory in kdump mode */
return 0;
if (!early_read_info_sccb_valid)
return 0;
if ((sclp_facilities & 0xe00000000000ULL) != 0xe00000000000ULL)
......
......@@ -433,6 +433,20 @@ static void chsc_process_sei_scm_change(struct chsc_sei_nt0_area *sei_area)
" failed (rc=%d).\n", ret);
}
static void chsc_process_sei_scm_avail(struct chsc_sei_nt0_area *sei_area)
{
int ret;
CIO_CRW_EVENT(4, "chsc: scm available information\n");
if (sei_area->rs != 7)
return;
ret = scm_process_availability_information();
if (ret)
CIO_CRW_EVENT(0, "chsc: process availability information"
" failed (rc=%d).\n", ret);
}
static void chsc_process_sei_nt2(struct chsc_sei_nt2_area *sei_area)
{
switch (sei_area->cc) {
......@@ -468,6 +482,9 @@ static void chsc_process_sei_nt0(struct chsc_sei_nt0_area *sei_area)
case 12: /* scm change notification */
chsc_process_sei_scm_change(sei_area);
break;
case 14: /* scm available notification */
chsc_process_sei_scm_avail(sei_area);
break;
default: /* other stuff */
CIO_CRW_EVENT(2, "chsc: sei nt0 unhandled cc=%d\n",
sei_area->cc);
......
......@@ -156,8 +156,10 @@ int chsc_scm_info(struct chsc_scm_info *scm_area, u64 token);
#ifdef CONFIG_SCM_BUS
int scm_update_information(void);
int scm_process_availability_information(void);
#else /* CONFIG_SCM_BUS */
static inline int scm_update_information(void) { return 0; }
static inline int scm_process_availability_information(void) { return 0; }
#endif /* CONFIG_SCM_BUS */
......
......@@ -211,7 +211,7 @@ static void scmdev_update(struct scm_device *scmdev, struct sale *sale)
goto out;
scmdrv = to_scm_drv(scmdev->dev.driver);
if (changed && scmdrv->notify)
scmdrv->notify(scmdev);
scmdrv->notify(scmdev, SCM_CHANGE);
out:
device_unlock(&scmdev->dev);
if (changed)
......@@ -297,6 +297,22 @@ int scm_update_information(void)
return ret;
}
static int scm_dev_avail(struct device *dev, void *unused)
{
struct scm_driver *scmdrv = to_scm_drv(dev->driver);
struct scm_device *scmdev = to_scm_dev(dev);
if (dev->driver && scmdrv->notify)
scmdrv->notify(scmdev, SCM_AVAIL);
return 0;
}
int scm_process_availability_information(void)
{
return bus_for_each_dev(&scm_bus_type, NULL, NULL, scm_dev_avail);
}
static int __init scm_init(void)
{
int ret;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册