- 09 11月, 2013 1 次提交
-
-
由 Philip J Kelleher 提交于
The rsxx driver was not checking the correct value during a pci_map_page failure. Fixing this also uncovered a double free if the bio was returned before it was broken up into indiviadual 4k dmas, that is also fixed here. Signed-off-by: NPhilip J Kelleher <pjk1939@linux.vnet.ibm.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 19 6月, 2013 11 次提交
-
-
由 Philip J Kelleher 提交于
Adding debugfs entries to help with debugging and testing and testing code. pci_regs: This entry will spit out all of the data stored on the BAR. stats: This entry will display all of the driver stats for each DMA channel. cram: This will allow read/write ability to the CRAM address space on our adapter's CPU. Signed-off-by: NPhilip J Kelleher <pjk1939@linux.vnet.ibm.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Philip J Kelleher 提交于
Fixing incorrect stats calculation during read retries. Signed-off-by: NPhilip J Kelleher <pjk1939@linux.vnet.ibm.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Philip J Kelleher 提交于
Unfortunaly, our CPU register path does not do any kind of EEH error checking. So to fix this issue, an ioread32 was added to the CPU register timeout code. This way, the driver can check to see if the timeout was caused by an EEH error or not. This is a dummy read. Signed-off-by: NPhilip J Kelleher <pjk1939@linux.vnet.ibm.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Philip J Kelleher 提交于
Adding a sanity check to guarentee that DMAs outside of the device's address space will be errored out right away. Signed-off-by: NPhilip J Kelleher <pjk1939@linux.vnet.ibm.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Philip J Kelleher 提交于
A kernel panic would occur on a DLPAR add if there was a partition still mounted during the DLPAR remove. This bug fix will allow the user to unmount the partition and bring the driver back into a good state after the DLPAR add. Signed-off-by: NPhilip J Kelleher <pjk1939@linux.vnet.ibm.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Philip J Kelleher 提交于
Changing the adapter name from FlashSystem-80 to the official name: Flash Adapter 900GB Full Height. Signed-off-by: NPhilip J Kelleher <pjk1939@linux.vnet.ibm.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Philip J Kelleher 提交于
Before, the partition table would have to be reread because our card was attached before it transistioned out of it's 'starting' state. This change will cause the driver to wait to attach the device until the adapter is ready. Signed-off-by: NPhilip J Kelleher <pjk1939@linux.vnet.ibm.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Philip J Kelleher 提交于
Previously, the block size was determined by whether or not our Hardware could handle 512 byte accesses. Now, all of our Hardware can handle 512 and 4096 block sizes. This fix allows it to be user configurable. Signed-off-by: NPhilip J Kelleher <pjk1939@linux.vnet.ibm.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Philip J Kelleher 提交于
The workqueue mechanism has been reworked to prevent soft lockup issues from occuring by adding in mutex sychronization. Signed-off-by: NPhilip J Kelleher <pjk1939@linux.vnet.ibm.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Philip J Kelleher 提交于
Before, DMAs would never be cancelled if there was a data stall or an EEH Permenant failure which would cause an unrecoverable I/O hang. The DMA cancellation mechanism has been modified to fix these issues and allows DMAs to be cancelled during the above mentioned events. Signed-off-by: NPhilip J Kelleher <pjk1939@linux.vnet.ibm.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Philip J Kelleher 提交于
Giving all interrupt based events their own workqueue to complete tasks on. This fixes a bug that would cause creg commands to timeout if too many are issued at once. Signed-off-by: NPhilip J Kelleher <pjk1939@linux.vnet.ibm.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 27 3月, 2013 2 次提交
-
-
由 Philip J Kelleher 提交于
Signed-off-by: NPhilip J Kelleher <pjk1939@linux.vnet.ibm.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Philip J Kelleher 提交于
Commit d8d595df introduced a bug where we did not check for a NULL return from kmalloc(). Make rsxx_eeh_save_issued_dmas() return an error for that case, and make the callers handle that. Signed-off-by: NPhilip J Kelleher <pjk1939@linux.vnet.ibm.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 26 3月, 2013 1 次提交
-
-
由 Philip J Kelleher 提交于
This patch removes dynamic allocation on the stack error. Signed-off-by: NPhilip J Kelleher <pjk1939@linux.vnet.ibm.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 16 3月, 2013 2 次提交
-
-
由 Jens Axboe 提交于
Spotted by Fenguan Wu's super build robot. Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Philip J Kelleher 提交于
Changes in v2 include: o Fixed spelling of guarantee. o Fixed potential memory leak if slot reset fails out. o Changed list_for_each_entry_safe with list_for_each_entry. Signed-off-by: NPhilip J Kelleher <pjk1939@linux.vnet.ibm.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 12 3月, 2013 4 次提交
-
-
由 Philip J Kelleher 提交于
This patch includes a simple change to the rsxx_pci_remove function that caused error messages because traffic was halted too early. Signed-off-by: NPhilip J Kelleher <pjk1939@linux.vnet.ibm.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Philip J Kelleher 提交于
This patch includes changing the hardware branding name from IBM RamSan to IBM FlashSystem. v2 Changes include: o Removing the unnecessary IBM Vendor ID #define v1 Changes include: o Changed all references of RamSan to FlashSystem. o Changed the vendor/device IDs for the product. o Changed driver version number. o Updated the MAINTAINERS file. o Various other little things. Signed-off-by: NPhilip J Kelleher <pjk1939@linux.vnet.ibm.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Philip J Kelleher 提交于
This patch includes changes to the cregs locking scheme. Before, inconsistant locking would occur because of misuse of spin_lock, spin_lock_bh, and counter parts. Signed-off-by: NPhilip J Kelleher <pjk1939@linux.vnet.ibm.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Philip J Kelleher 提交于
This patch includes trivial changes that were recommended by different members of the Linux Community. Changes include: o Removing the redundant wmb(). o Formatting o Various other little things. Signed-off-by: NPhilip J Kelleher <pjk1939@linux.vnet.ibm.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 19 2月, 2013 1 次提交
-
-
由 Philip J Kelleher 提交于
This patch includes the following driver fixes for the IBM RamSan 70/80 driver: o Changed the creg_ctrl lock from a mutex to a spinlock. o Added a count check for ioctl calls. o Removed unnecessary casting of void pointers. o Made every function static that needed to be. o Added comments to explain things more thoroughly. Signed-off-by: NPhilip J Kelleher <pjk1939@linux.vnet.ibm.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 07 2月, 2013 1 次提交
-
-
由 Jens Axboe 提交于
kbuild test robot says: tree: git://git.kernel.dk/linux-block.git for-3.9/drivers head: 1262e24a commit: 8722ff8c [6/8] block: IBM RamSan 70/80 device driver config: make ARCH=alpha allyesconfig All error/warnings: drivers/block/rsxx/dma.c: In function 'rsxx_complete_dma': >> drivers/block/rsxx/dma.c:251:2: error: implicit declaration of function 'kmem_cache_free' [-Werror=implicit-function-declaration] drivers/block/rsxx/dma.c: In function 'rsxx_queue_discard': >> drivers/block/rsxx/dma.c:567:2: error: implicit declaration of function 'kmem_cache_alloc' [-Werror=implicit-function-declaration] >> drivers/block/rsxx/dma.c:567:6: warning: assignment makes pointer from integer without a cast [enabled by default] drivers/block/rsxx/dma.c: In function 'rsxx_queue_dma': >> drivers/block/rsxx/dma.c:601:6: warning: assignment makes pointer from integer without a cast [enabled by default] drivers/block/rsxx/dma.c: In function 'rsxx_dma_init': >> drivers/block/rsxx/dma.c:985:2: error: implicit declaration of function 'KMEM_CACHE' [-Werror=implicit-function-declaration] >> drivers/block/rsxx/dma.c:985:29: error: 'rsxx_dma' undeclared (first use in this function) drivers/block/rsxx/dma.c:985:29: note: each undeclared identifier is reported only once for each function it appears in >> drivers/block/rsxx/dma.c:985:39: error: 'SLAB_HWCACHE_ALIGN' undeclared (first use in this function) drivers/block/rsxx/dma.c: In function 'rsxx_dma_cleanup': >> drivers/block/rsxx/dma.c:995:2: error: implicit declaration of function 'kmem_cache_destroy' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 06 2月, 2013 1 次提交
-
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 05 2月, 2013 1 次提交
-
-
由 josh.h.morris@us.ibm.com 提交于
This patch includes the device driver for the IBM RamSan family of PCI SSD flash storage cards. This driver will include support for the RamSan 70 and 80. The driver presents a block device for device I/O. Signed-off-by: NPhilip J Kelleher <pjk1939@linux.vnet.ibm.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-