The rsxx driver was not checking the correct value during a
pci_map_page failure. Fixing this also uncovered a
double free if the bio was returned before it was
broken up into indiviadual 4k dmas, that is also
fixed here.
Signed-off-by: NPhilip J Kelleher <pjk1939@linux.vnet.ibm.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

When the loop module is loaded, it creates 8 loop devices /dev/loop[0-7].
The devices have no request routine and thus, when they are used without
being assigned, a crash happens.

For example, these commands cause crash (assuming there are no used loop
devices):

Kernel Fault: Code=26 regs=000000007f420980 (Addr=0000000000000010)
CPU: 1 PID: 50 Comm: kworker/1:1 Not tainted 3.11.0 #1
Workqueue: ksnaphd do_metadata [dm_snapshot]
task: 000000007fcf4078 ti: 000000007f420000 task.ti: 000000007f420000
[  116.319988]
     YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00001000000001001111111100001111 Not tainted
r00-03  000000ff0804ff0f 00000000408bf5d0 00000000402d8204 000000007b7ff6c0
r04-07  00000000408a95d0 000000007f420950 000000007b7ff6c0 000000007d06c930
r08-11  000000007f4205c0 0000000000000001 000000007f4205c0 000000007f4204b8
r12-15  0000000000000010 0000000000000000 0000000000000000 0000000000000000
r16-19  000000001108dd48 000000004061cd7c 000000007d859800 000000000800000f
r20-23  0000000000000000 0000000000000008 0000000000000000 0000000000000000
r24-27  00000000ffffffff 000000007b7ff6c0 000000007d859800 00000000408a95d0
r28-31  0000000000000000 000000007f420950 000000007f420980 000000007f4208e8
sr00-03  0000000000000000 0000000000000000 0000000000000000 0000000000303000
sr04-07  0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  117.549988]
IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000402d82fc 00000000402d8300
 IIR: 53820020    ISR: 0000000000000000  IOR: 0000000000000010
 CPU:        1   CR30: 000000007f420000 CR31: ffffffffffffffff
 ORIG_R28: 0000000000000001
 IAOQ[0]: generic_make_request+0x11c/0x1a0
 IAOQ[1]: generic_make_request+0x120/0x1a0
 RP(r2): generic_make_request+0x24/0x1a0
Backtrace:
 [<00000000402d83f0>] submit_bio+0x70/0x140
 [<0000000011087c4c>] dispatch_io+0x234/0x478 [dm_mod]
 [<0000000011087f44>] sync_io+0xb4/0x190 [dm_mod]
 [<00000000110883bc>] dm_io+0x2c4/0x310 [dm_mod]
 [<00000000110bfcd0>] do_metadata+0x28/0xb0 [dm_snapshot]
 [<00000000401591d8>] process_one_work+0x160/0x460
 [<0000000040159bc0>] worker_thread+0x300/0x478
 [<0000000040161a70>] kthread+0x118/0x128
 [<0000000040104020>] end_fault_vector+0x20/0x28
 [<0000000040177220>] task_tick_fair+0x420/0x4d0
 [<00000000401aa048>] invoke_rcu_core+0x50/0x60
 [<00000000401ad5b8>] rcu_check_callbacks+0x210/0x8d8
 [<000000004014aaa0>] update_process_times+0xa8/0xc0
 [<00000000401ab86c>] rcu_process_callbacks+0x4b4/0x598
 [<0000000040142408>] __do_softirq+0x250/0x2c0
 [<00000000401789d0>] find_busiest_group+0x3c0/0xc70
[  119.379988]
Kernel panic - not syncing: Kernel Fault
Rebooting in 1 seconds..
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If the permission check fails, we drop a reference to the blkif without
having taken it in the first place. The bug was introduced in commit
604c499c (xen/blkback: Check device
permissions before allowing OP_DISCARD).

Cc: stable@vger.kernel.org
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NVegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Improve the calculation of required grants to process a request by
using nr_phys_segments instead of always assuming a request is going
to use all posible segments.

nr_phys_segments contains the number of scatter-gather DMA addr+len
pairs, which is basically what we put at every granted page.
for_each_sg iterates over the DMA addr+len pairs and uses a grant
page for each of them.
Signed-off-by: NRoger Pau Monné <roger.pau@citrix.com>
Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

There's no need to keep the foreign access in a grant if it is not
persistently mapped by the backend. This allows us to free grants that
are not mapped by the backend, thus preventing blkfront from hoarding
all grants.

The main effect of this is that blkfront will only persistently map
the same grants as the backend, and it will always try to use grants
that are already mapped by the backend. Also the number of persistent
grants in blkfront is the same as in blkback (and is controlled by the
value in blkback).
Signed-off-by: NRoger Pau Monné <roger.pau@citrix.com>
Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com>
Acked-by: NMatt Wilson <msw@amazon.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch proposes to remove the use of the IRQF_DISABLED flag

It's a NOOP since 2.6.35 and it will be removed one day.
Signed-off-by: NMichael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Someone cut and pasted md's md_trim_bio() into xen-blkfront.c. Come on,
we should know better than this.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Neil Brown <neilb@suse.de>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The probe function is supposed to return NULL on failure (as we can see in
kobj_lookup: kobj = probe(dev, index, data); ... if (kobj) return kobj;

However, in loop and brd, it returns negative error from ERR_PTR.

This causes a crash if we simulate disk allocation failure and run
less -f /dev/loop0 because the negative number is interpreted as a pointer:

BUG: unable to handle kernel NULL pointer dereference at 00000000000002b4
IP: [<ffffffff8118b188>] __blkdev_get+0x28/0x450
PGD 23c677067 PUD 23d6d1067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: loop hpfs nvidia(PO) ip6table_filter ip6_tables uvesafb cfbcopyarea cfbimgblt cfbfillrect fbcon font bitblit fbcon_rotate fbcon_cw fbcon_ud fbcon_ccw softcursor fb fbdev msr ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 xt_state ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc tun ipv6 cpufreq_stats cpufreq_ondemand cpufreq_userspace cpufreq_powersave cpufreq_conservative hid_generic spadfs usbhid hid fuse raid0 snd_usb_audio snd_pcm_oss snd_mixer_oss md_mod snd_pcm snd_timer snd_page_alloc snd_hwdep snd_usbmidi_lib dmi_sysfs snd_rawmidi nf_nat_ftp nf_nat nf_conntrack_ftp nf_conntrack snd soundcore lm85 hwmon_vid ohci_hcd ehci_pci ehci_hcd serverworks sata_svw libata acpi_cpufreq freq_table mperf ide_core usbcore kvm_amd kvm tg3 i2c_piix4 libphy microcode e100 usb_common ptp skge i2c_core pcspkr k10temp evdev floppy hwmon pps_core mii rtc_cmos button processor unix [last unloaded: nvidia]
CPU: 1 PID: 6831 Comm: less Tainted: P        W  O 3.10.15-devel #18
Hardware name: empty empty/S3992-E, BIOS 'V1.06   ' 06/09/2009
task: ffff880203cc6bc0 ti: ffff88023e47c000 task.ti: ffff88023e47c000
RIP: 0010:[<ffffffff8118b188>]  [<ffffffff8118b188>] __blkdev_get+0x28/0x450
RSP: 0018:ffff88023e47dbd8  EFLAGS: 00010286
RAX: ffffffffffffff74 RBX: ffffffffffffff74 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000001
RBP: ffff88023e47dc18 R08: 0000000000000002 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff88023f519658
R13: ffffffff8118c300 R14: 0000000000000000 R15: ffff88023f519640
FS:  00007f2070bf7700(0000) GS:ffff880247400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000002b4 CR3: 000000023da1d000 CR4: 00000000000007e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
 0000000000000002 0000001d00000000 000000003e47dc50 ffff88023f519640
 ffff88043d5bb668 ffffffff8118c300 ffff88023d683550 ffff88023e47de60
 ffff88023e47dc98 ffffffff8118c10d 0000001d81605698 0000000000000292
Call Trace:
 [<ffffffff8118c300>] ? blkdev_get_by_dev+0x60/0x60
 [<ffffffff8118c10d>] blkdev_get+0x1dd/0x370
 [<ffffffff8118c300>] ? blkdev_get_by_dev+0x60/0x60
 [<ffffffff813cea6c>] ? _raw_spin_unlock+0x2c/0x50
 [<ffffffff8118c300>] ? blkdev_get_by_dev+0x60/0x60
 [<ffffffff8118c365>] blkdev_open+0x65/0x80
 [<ffffffff8114d12e>] do_dentry_open.isra.18+0x23e/0x2f0
 [<ffffffff8114d214>] finish_open+0x34/0x50
 [<ffffffff8115e122>] do_last.isra.62+0x2d2/0xc50
 [<ffffffff8115eb58>] path_openat.isra.63+0xb8/0x4d0
 [<ffffffff81115a8e>] ? might_fault+0x4e/0xa0
 [<ffffffff8115f4f0>] do_filp_open+0x40/0x90
 [<ffffffff813cea6c>] ? _raw_spin_unlock+0x2c/0x50
 [<ffffffff8116db85>] ? __alloc_fd+0xa5/0x1f0
 [<ffffffff8114e45f>] do_sys_open+0xef/0x1d0
 [<ffffffff8114e559>] SyS_open+0x19/0x20
 [<ffffffff813cff16>] system_call_fastpath+0x1a/0x1f
Code: 44 00 00 55 48 89 e5 41 57 49 89 ff 41 56 41 89 d6 41 55 41 54 4c 8d 67 18 53 48 83 ec 18 89 75 cc e9 f2 00 00 00 0f 1f 44 00 00 <48> 8b 80 40 03 00 00 48 89 df 4c 8b 68 58 e8 d5
a4 07 00 44 89
RIP  [<ffffffff8118b188>] __blkdev_get+0x28/0x450
 RSP <ffff88023e47dbd8>
CR2: 00000000000002b4
---[ end trace bb7f32dbf02398dc ]---

The brd change should be backported to stable kernels starting with 2.6.25.
The loop change should be backported to stable kernels starting with 2.6.22.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Acked-by: NTejun Heo <tj@kernel.org>
Cc: stable@kernel.org	# 2.6.22+
Signed-off-by: NJens Axboe <axboe@kernel.dk>

loop: fix crash if blk_alloc_queue fails

If blk_alloc_queue fails, loop_add cleans up, but it doesn't clean up the
identifier allocated with idr_alloc. That causes crash on module unload in
idr_for_each(&loop_index_idr, &loop_exit_cb, NULL); where we attempt to
remove non-existed device with that id.

BUG: unable to handle kernel NULL pointer dereference at 0000000000000380
IP: [<ffffffff812057c9>] del_gendisk+0x19/0x2d0
PGD 43d399067 PUD 43d0ad067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: loop(-) dm_snapshot dm_zero dm_mirror dm_region_hash dm_log dm_loop dm_mod ip6table_filter ip6_tables uvesafb cfbcopyarea cfbimgblt cfbfillrect fbcon font bitblit fbcon_rotate fbcon_cw fbcon_ud fbcon_ccw softcursor fb fbdev msr ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 xt_state ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc tun ipv6 cpufreq_userspace cpufreq_stats cpufreq_ondemand cpufreq_conservative cpufreq_powersave spadfs fuse hid_generic usbhid hid raid0 md_mod dmi_sysfs nf_nat_ftp nf_nat nf_conntrack_ftp nf_conntrack snd_usb_audio snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc lm85 hwmon_vid snd_hwdep snd_usbmidi_lib snd_rawmidi snd soundcore acpi_cpufreq ohci_hcd freq_table tg3 ehci_pci mperf ehci_hcd kvm_amd kvm sata_svw serverworks libphy libata ide_core k10temp usbcore hwmon microcode ptp pcspkr pps_core e100 skge mii usb_common i2c_piix4 floppy evdev rtc_cmos i2c_core processor but!
 ton unix
CPU: 7 PID: 2735 Comm: rmmod Tainted: G        W    3.10.15-devel #15
Hardware name: empty empty/S3992-E, BIOS 'V1.06   ' 06/09/2009
task: ffff88043d38e780 ti: ffff88043d21e000 task.ti: ffff88043d21e000
RIP: 0010:[<ffffffff812057c9>]  [<ffffffff812057c9>] del_gendisk+0x19/0x2d0
RSP: 0018:ffff88043d21fe10  EFLAGS: 00010282
RAX: ffffffffa05102e0 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff88043ea82800 RDI: 0000000000000000
RBP: ffff88043d21fe48 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000000 R12: 00000000000000ff
R13: 0000000000000080 R14: 0000000000000000 R15: ffff88043ea82800
FS:  00007ff646534700(0000) GS:ffff880447000000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000380 CR3: 000000043e9bf000 CR4: 00000000000007e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
 ffffffff8100aba4 0000000000000092 ffff88043d21fe48 ffff88043ea82800
 00000000000000ff ffff88043d21fe98 0000000000000000 ffff88043d21fe60
 ffffffffa05102b4 0000000000000000 ffff88043d21fe70 ffffffffa05102ec
Call Trace:
 [<ffffffff8100aba4>] ? native_sched_clock+0x24/0x80
 [<ffffffffa05102b4>] loop_remove+0x14/0x40 [loop]
 [<ffffffffa05102ec>] loop_exit_cb+0xc/0x10 [loop]
 [<ffffffff81217b74>] idr_for_each+0x104/0x190
 [<ffffffffa05102e0>] ? loop_remove+0x40/0x40 [loop]
 [<ffffffff8109adc5>] ? trace_hardirqs_on_caller+0x105/0x1d0
 [<ffffffffa05135dc>] loop_exit+0x34/0xa58 [loop]
 [<ffffffff810a98ea>] SyS_delete_module+0x13a/0x260
 [<ffffffff81221d5e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
 [<ffffffff813cff16>] system_call_fastpath+0x1a/0x1f
Code: f0 4c 8b 6d f8 c9 c3 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 56 41 55 4c 8d af 80 00 00 00 41 54 53 48 89 fb 48 83 ec 18 <48> 83 bf 80 03 00
00 00 74 4d e8 98 fe ff ff 31 f6 48 c7 c7 20
RIP  [<ffffffff812057c9>] del_gendisk+0x19/0x2d0
 RSP <ffff88043d21fe10>
CR2: 0000000000000380
---[ end trace 64ec069ec70f1309 ]---
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Acked-by: NTejun Heo <tj@kernel.org>
Cc: stable@kernel.org	# 3.1+
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Custom VID/PID for Z3X Box device, popular tool for cellphone flashing.
Signed-off-by: NAlexey E. Kramarenko <alexeyk13@yandex.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit b8bdad60.

Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip.  This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.
Reported-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Cc: Frank Schäfer <fschaefer.oss@googlemail.com>
Acked-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 57ce61aa.

Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip.  This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.
Reported-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Cc: Frank Schäfer <fschaefer.oss@googlemail.com>
Acked-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "usb: pl2303: do not round to the next nearest standard baud rate for the divisor based baud rate encoding method"

This reverts commit 75417d9f.

Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip.  This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.
Reported-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Cc: Frank Schäfer <fschaefer.oss@googlemail.com>
Acked-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit b9208c72.

Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip.  This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.
Reported-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Cc: Frank Schäfer <fschaefer.oss@googlemail.com>
Acked-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit e917ba01.

Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip.  This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.
Reported-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Cc: Frank Schäfer <fschaefer.oss@googlemail.com>
Acked-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit b5c16c6a.

Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip.  This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.
Reported-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Cc: Frank Schäfer <fschaefer.oss@googlemail.com>
Acked-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "usb: pl2303: also use the divisor based baud rate encoding method for baud rates < 115200 with HX chips"

This reverts commit 61fa8d69.

Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip.  This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.
Reported-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Cc: Frank Schäfer <fschaefer.oss@googlemail.com>
Acked-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit c23bda36.

Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip.  This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.
Reported-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Cc: Frank Schäfer <fschaefer.oss@googlemail.com>
Acked-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 73b583af.

Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip.  This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.
Reported-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Cc: Frank Schäfer <fschaefer.oss@googlemail.com>
Acked-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit a77a8c23.

Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip.  This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.
Reported-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Cc: Frank Schäfer <fschaefer.oss@googlemail.com>
Acked-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 034d1527.

Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip.  This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.
Reported-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Cc: Frank Schäfer <fschaefer.oss@googlemail.com>
Acked-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 7d26a78f.

Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as
they cause regressions on some versions of the chip.  This will all be
revisited for later kernel versions when we can figure out how to handle
this in a way that does not break working devices.
Reported-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Cc: Frank Schäfer <fschaefer.oss@googlemail.com>
Acked-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The last i915 drm update brought with it this annoying warning

  drivers/gpu/drm/i915/intel_crt.c: In function ‘intel_crt_get_config’:
  drivers/gpu/drm/i915/intel_crt.c:110:21: warning: unused variable ‘dev’ [-Wunused-variable]
    struct drm_device *dev = encoder->base.dev;
                       ^

introduced by commit 7195a50b ("drm/i915: Add HSW CRT output readout
support").

Remove the offending pointless variable.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds support for touchpad found on Dell XT2. It's a dual device
with device ID: 73, 00, 14, that comply with "ALPS_PROTO_V2".
Signed-off-by: NYunkang Tang <yunkang.tang@cn.alps.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The icount.reserved[] array isn't initialized so it leaks stack
information to userspace.
Reported-by: NNico Golde <nico@ngolde.de>
Reported-by: NFabian Yamaguchi <fabs@goesec.de>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The DevInfo.u32Reserved[] array isn't initialized so it leaks kernel
information to user space.
Reported-by: NNico Golde <nico@ngolde.de>
Reported-by: NFabian Yamaguchi <fabs@goesec.de>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We need to check the length parameter before doing the memcpy().  I've
actually changed it to strlcpy() as well so that it's NUL terminated.

You need CAP_NET_ADMIN to trigger these so it's not the end of the
world.
Reported-by: NNico Golde <nico@ngolde.de>
Reported-by: NFabian Yamaguchi <fabs@goesec.de>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In commit d496f94d ('[SCSI] aacraid: fix security weakness') we
added a check on CAP_SYS_RAWIO to the ioctl.  The compat ioctls need the
check as well.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We need to check "count" so we don't overflow the ei->data buffer.
Reported-by: NNico Golde <nico@ngolde.de>
Reported-by: NFabian Yamaguchi <fabs@goesec.de>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 2dc41281 (ACPI / hotplug / PCI: Avoid doing too much for
spurious notifies) changed the enable_slot() to check return value of
pci_scan_slot() and if it is zero return early from the function. It
means that there were no new devices in this particular slot.

However, if a device appeared deeper in the hierarchy the code now
ignores it causing things like Thunderbolt chaining fail to recognize
new devices.

The problem with Alex Williamson's machine was solved with commit
a47d8c8e (ACPI / hotplug / PCI: Avoid parent bus rescans on spurious
device checks) and hence we should be able to restore the original
functionality that we always rescan on bus check notification.

On a device check notification we still check what acpiphp_rescan_slot()
returns and on zero bail out early.

Fixes: 2dc41281 (ACPI / hotplug / PCI: Avoid doing too much for spurious notifies)
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

DRM_IOCTL_VERSION is a reliable way to get the driver-name and version
information. It's not related to the interface-version (SET_VERSION ioctl)
so we can safely enable it on render-nodes.

Note that gbm uses udev-BUSID to load the correct mesa driver. However,
the VERSION ioctl should be the more reliable way to do this (in case we
add new DRM-bus drivers which have no BUSID or similar).
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Nico Golde reports a few straggling uses of [io_]remap_pfn_range() that
really should use the vm_iomap_memory() helper.  This trivially converts
two of them to the helper, and comments about why the third one really
needs to continue to use remap_pfn_range(), and adds the missing size
check.
Reported-by: NNico Golde <nico@ngolde.de>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org.

Originally I've thought that this is leftover hw state dirt from the
BIOS. But after way too much helpless flailing around on my part I've
noticed that the actual bug is when we change the state of an already
active pipe.

For example when we change the fdi lines from 2 to 3 without switching
off outputs in-between we'll never see the crucial on->off transition
in the ->modeset_global_resources hook the current logic relies on.

Patch version 2 got this right by instead also checking whether the
pipe is indeed active. But that in turn broke things when pipes have
been turned off through dpms since the bifurcate enabling is done in
the ->crtc_mode_set callback.

To address this issues discussed with Ville in the patch review move
the setting of the bifurcate bit into the ->crtc_enable hook. That way
we won't wreak havoc with this state when userspace puts all other
outputs into dpms off state. This also moves us forward with our
overall goal to unify the modeset and dpms on paths (which we need to
have to allow runtime pm in the dpms off state).

Unfortunately this requires us to move the bifurcate helpers around a
bit.

Also update the commit message, I've misanalyzed the bug rather badly.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70507Tested-by: NJan-Michael Brummer <jan.brummer@tabos.org>
Cc: stable@vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The Intel D410PT(LW) and D425KT Mini-ITX desktop boards both show up as
having LVDS but the hardware is not populated. This patch adds them to
the list of such systems. Patch is against 3.11.4

v2: Patch revised to match the D425KT exactly as the D425KTW does have
LVDS.  According to Intel's documentation, the D410PTL and D410PLTW
don't.
Signed-off-by: NRob Pearce <rob@flitspace.org.uk>
Cc: stable@vger.kernel.org
[danvet: Pimp commit message to my liking and add cc: stable.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This isn't a real fix to the problem, but rather a stopgap measure while
trying to find a proper solution.

There are several laptops out there that fail to light up the eDP panel
in UEFI boot mode. They seem to be mostly IVB machines, including but
apparently not limited to Dell XPS 13, Asus TX300, Asus UX31A, Asus
UX32VD, Acer Aspire S7. They seem to work in CSM or legacy boot.

The difference between UEFI and CSM is that the BIOS provides a
different VBT to the kernel. The UEFI VBT typically specifies 18 bpp and
1.62 GHz link for eDP, while CSM VBT has 24 bpp and 2.7 GHz link. We end
up clamping to 18 bpp in UEFI mode, which we can fit in the 1.62 Ghz
link, and for reasons yet unknown fail to light up the panel.

Dithering from 24 to 18 bpp itself seems to work; if we use 18 bpp with
2.7 GHz link, the eDP panel lights up. So essentially this is a link
speed issue, and *not* a bpp clamping issue.

The bug raised its head since
commit 657445fe
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sat May 4 10:09:18 2013 +0200

    Revert "drm/i915: revert eDP bpp clamping code changes"

which started clamping bpp *before* computing the link requirements, and
thus affecting the required bandwidth. Clamping after the computations
kept the link at 2.7 GHz.

Even though the BIOS tells us to use 18 bpp through the VBT, it happily
boots up at 24 bpp and 2.7 GHz itself! Use this information to
selectively ignore the VBT provided value.

We can't ignore the VBT eDP bpp altogether, as there are other laptops
that do require the clamping to be used due to EDID reporting higher bpp
than the panel can support.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59841
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67950Tested-by: NUlf Winkelvos <ulf@winkelvos.de>
Tested-by: Njkp <jkp@iki.fi>
CC: stable@vger.kernel.org
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Call intel_ddi_get_config() to get the pipe_bpp settings from
DDI.

The sync polarity settings from DDI are irrelevant for CRT
output, so override them with data from the ADPA register.

Note: This is already merged in drm-intel-next-queued as

commit 6801c18c
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date:   Tue Sep 24 14:24:05 2013 +0300

    drm/i915: Add HSW CRT output readout support

but is required for the following edp bpp bugfix.

v2: Extract intel_crt_get_flags()

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69691Tested-by: NQingshuai Tian <qingshuai.tian@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On CTG+ read out the pipe bpp setting from hardware and fill it into
pipe config. Also check it appropriately.

v2: Don't do the pipe_bpp extraction inside the PCH only code block on
    ILK+.
    Avoid the PIPECONF read as we already have read it for the
    PIPECONF_EANBLE check.

Note: This is already in drm-intel-next-queued as
commit 42571aef
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date:   Fri Sep 6 23:29:00 2013 +0300

    drm/i915: Add support for pipe_bpp readout

but is needed for the following bugfix.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch addresses a long-standing bug where the get_user_pages_fast()
write parameter used for setting the underlying page table entry permission
bits was incorrectly set to write=1 for data_direction=DMA_TO_DEVICE, and
passed into get_user_pages_fast() via vhost_scsi_map_iov_to_sgl().

However, this parameter is intended to signal WRITEs to pinned userspace
PTEs for the virtio-scsi DMA_FROM_DEVICE -> READ payload case, and *not*
for the virtio-scsi DMA_TO_DEVICE -> WRITE payload case.

This bug would manifest itself as random process segmentation faults on
KVM host after repeated vhost starts + stops and/or with lots of vhost
endpoints + LUNs.

Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Asias He <asias@redhat.com>
Cc: <stable@vger.kernel.org> # 3.6+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

In case of error, the function scsi_host_lookup() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

The "legacy" ECC layout used until 3.12-rc1 uses all the OOB area by
computing the ECC strength and ECC step size ourselves.

Commit 2febcdf8 ("mtd: gpmi: set the BCHs geometry with the ecc info")
makes the driver use the ECC info (ECC strength and ECC step size)
provided by the MTD code, and creates a different NAND ECC layout
for the BCH, and use the new ECC layout. This causes a regression:

   We can not mount the ubifs which was created by the old NAND ECC layout.

This patch fixes this issue by reverting to the legacy ECC layout.

We will probably introduce a new device-tree property to indicate that
the new ECC layout can be used. For now though, for the imminent 3.12
release, we just unconditionally revert to the 3.11 behaviour.

This leaves a harmless cosmetic warning about an unused function. At
this point in the cycle I really don't care.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
Acked-by: NHuang Shijie <b32955@freescale.com>
Acked-by: NMarek Vasut <marex@denx.de>
Tested-by: NMarek Vasut <marex@denx.de>