- 16 7月, 2013 1 次提交
-
-
由 David Henningsson 提交于
This Conexant codec has a single jack that can be used as either headphone or mic (but not headset). The existing hp_mic functionality does not apply here, because the mic and the HP are on separate pins. Hence make a lighter version of what has been earlier done for Realtek codecs. BugLink: https://bugs.launchpad.net/bugs/1198030Tested-by: NFranz Hsieh <franz.hsieh@canonical.com> Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 15 7月, 2013 1 次提交
-
-
由 Fengguang Wu 提交于
sound/pci/rme9652/hdspm.c:1110:2-3: Unneeded semicolon Generated by: coccinelle/misc/semicolon.cocci Reported-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 08 7月, 2013 1 次提交
-
-
由 Takashi Iwai 提交于
ALC5505 DSP is enabled even though we don't use the features yet at all. This results in the unnecessarily high power consumption, more than 100mV higher. Until we implement the DSP support, better to bypass DSP for saving more power. Reported-by: NMengdong Lin <mengdong.lin@intel.com> [Patch modified by Mengdong to cal alc5505_dsp_init() with extra acl5505_dsp_halt().] Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 05 7月, 2013 37 次提交
-
-
由 Martin Dausel 提交于
Signed-off-by: NMartin Dausel <martin.dausel@iosono-sound.com> Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
Also use snd_ctl_enum_info() to fill the autosync text fields on AES32 and MADI cards (only users of snd_hdspm_info_autosync_ref). Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
Also use snd_ctl_enum_info() to fill the autosync enumerated controls. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
Use snd_ctl_enum_info() to fill most of the enumerated controls. More non-trivial occurrences will follow in separate commits. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
This patch finally enables TCO support on RME AES(32) cards. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
This patch adds a new ALSA control to read the external sample rate from userspace on RME AES(32) cards. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
This patch refactors the code to query the external sample rate and its translation into the corresponding enum into a helper function to prevent future code duplication. A later commit will make use of this new helper function. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
Also report TCO status and Sync-In via /proc/ on AES(32) cards. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
This patch enables the user to select "TCO" and "Sync In" as a preferred sync reference on RME AES(32) cards. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
This patch adds support to read the TCO sample rate in hdspm_external_sample_rate() on RME AES(32) cards. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
As mentioned in the comment, the AES32 cards must not set the format bit, since it is used to indicate the preferred sync setting instead. We hence simply skip the corresponding part in the hw_params function. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
This patch adds AES32 specific code to hdspm_get_tco_sample_rate to query the TCO sample rate. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
This patch adds AES32 specific code to hdspm_get_wc_sample_rate() to query the wordclock frequency. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
This patch only introduces prototype declarations, no real change. The functions themselves are already present. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
Helper function to return the AES sample rate class. This class needs to be translated via HDSPM_bit2freq() to get the more common representation. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
Provide the text for the two new clock options "TCO" and "Sync In" on AES32 cards. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
The HDSPM_AUTOSYNC_REF macro is only implemented for MADI and AES32 cards, so it doesn't make sense to call it on AIO boards. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
This patch does nothing, it's sole intent is to clean up the code. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
HDSPM_tco_lock and HDSPM_tcoLock were too close, so the previous code didn't honour the difference between the two. Let's be more verbose and use HDSPM_tcoLockMadi for MADI cards, HDSPM_tcoLockAes for AES(32) and fix the code that makes use of both. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
This patch separates the TCO bits from snd_hdspm_proc_read_madi(), so the new function can later be shared between MADI and AES32 cards. It's essentially only moving code around, no new functionality. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
This is a left-over mistake from old code, the correct register offset is provided in kcontrol->private_value, not in the index. Cf. RayDAT case, where it has already been corrected. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
AIO cards allow to use AEB (Analogue Expansion Boards) to add four input and/or output channels. This patch adds the necessary code to detect and enable the additional I/O channels. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
This patch uses the newly introduced HDSPM_CONTROL_TRISTATE functions to create and expose the following ALSA controls: - Gain selection for Input, Output and Phones (HiGain, +4dBu, -10dbV) - S/PDIF Input select (Coaxial, Optical, Internal) Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
AIO cards offer at least four individual settings options with three states each. Those settings are represented as two bits in the settings register with the following meaning: 0*some_base_bit --> Option value 0 1*some_base_bit --> Option value 1 2*some_base_bit --> Option value 2 3*some_base_bit --> mask to select the two involved bits This patch adds a generic ALSA control macro for such a value-to-bit pattern mapping. It will be used in a later commit to expose four new controls. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
ENUMERATED_CTL_INFO is a macro, so the binary code is generated multiple times. To avoid code duplication, refactor the involved functionality into a function and make ENUMERATED_CTL_INFO a call to this function. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
This commit adds the following ALSA controls: - S/PDIF Out Optical to switch S/PDIF Out from coaxial to optical - S/PDIF Out Professional to send the Pro bit in the output stream - ADAT-Internal to enable ADAT/TDIF Expansion Board (AEB/TEB) - XLR Breakout Cable if analogue I/O uses the XLR breakout cable - WCK48 to force WordClock to the 32-48kHz range (single speed) if the card is operating at higher frequencies Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
This commit adds new ALSA controls to send single-speed WordClock and S/PDIF-Professional on RME RayDAT cards. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
hdspm_set_system_clock_mode() is almost a one-by-one copy of hdspm_set_toggle_setting(). To improve code quality, remove the duplication. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
The HDSPM_TOGGLE_SETTING functions alter the control_register on older cards. On newer cards (AIO/RayDAT), they have to operate on the settings_register instead. This patch augments the existing functions to work with AIO/RayDAT, too. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
RME RayDAT and AIO cards are new designs with different register settings. Since we need to distinguish them from older cards multiple times in the driver, refactor the code into a separate helper function. No functional change intended. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Adrian Knoth 提交于
The driver did not support all possible configurations. These defines will be used by later commits to add the missing functionality. Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Finally all the static quirks in patch_analog.c are reduced by this patch. As machines with AD1986A codec are all old and often their BIOS are buggy, we need to keep at least a few static pin conifgs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Most of ASUS laptops and Lenovo N100 provide proper BIOS pin-configs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The BIOS provides good pin-configurations, so we can drop the static quirk now. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
BIOS on Samsung R55, M55 and M50 provide the proper pin-configs, so we can remove the corresponding static quirk entries gracefully. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Just need to override some pin-configurations. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
... to a fixup entry. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-