Commit 84b79f8d (drm/i915: Fix crash
while aborting hibernation) attempted to fix a regression introduced
by commit cbda12d7 (drm/i915:
implement new pm ops for i915), but it went too far trying to split
the freeze/suspend and resume/thaw parts of the code.  As a result,
it introduced another regression, which only is visible on some systems.

Fix the problem by merging i915_drm_suspend() with
i915_drm_freeze() and moving some code from i915_resume()
into i915_drm_thaw(), so that intel_opregion_free() and
intel_opregion_init() are also executed in the freeze and thaw code
paths, respectively.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: NPedro Ribeiro <pedrib@gmail.com>
Tested-by: NTino Keitel <tino.keitel@tikei.de>
Acked-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Wrong Lid state reported.
Need to blacklist this machine for LVDS detection.
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Mostly obvious simplifications.

The i915 pread/pwrite ioctls, intel_overlay_put_image and
nouveau_gem_new were incorrectly using the locked versions
without locking: this is also fixed in this patch.
Signed-off-by: NLuca Barbieri <luca@luca-barbieri.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This will prevent things from falling over if the user frees the flip
buffer before we complete the flip, since we'll hold an internal
reference.
Reported-by: NKristian Høgsberg <krh@bitplanet.net>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NEric Anholt <eric@anholt.net>

Commit cbda12d7 (drm/i915: implement
new pm ops for i915) introduced the problem that if s2disk hibernation
is aborted, the system will crash, because i915_pm_freeze() does
nothing, while it should at least reverse some operations carried out
by i915_suspend().

Fix this issue by splitting the i915 suspend into a freeze part a
suspend part, where the latter is not executed before creating a
hibernation image, and the i915 resume into a "low-level" resume part
and a thaw part, where the former is not executed after the image has
been created.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Tested-by: NAlan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NOwain G. Ainsworth <oga@openbsd.org>
Signed-off-by: NEric Anholt <eric@anholt.net>

The MI_DISPLAY_FLIP command needs to be set the same pipe
source image like in pipe source register, e.g source image
size minus one. This fixes screen corrupt issue on Ironlake.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

On Ironlake plane flip interrupt means flip done event already, the
behavior is not like old chips, and perform like other usual interrupt.
So only need to handle flip done event when receiving that interrupt.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

When a new page flip is requested, we need to both queue an unpin for
the current framebuffer, and also increment the flip pending count on
the newly submitted buffer.

At flip finish time, we need to unpin the old fb and decrement the flip
pending count on the new buffer.

The old code was conflating the two, and led to hangs when new direct
rendered apps were started, replacing the existing frame buffer.  This
patch splits out the buffers and prevents the hangs.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NKristian Høgsberg <krh@bitplanet.net>
Signed-off-by: NEric Anholt <eric@anholt.net>

On 945, we need to avoid entering self-refresh if the compressor is
busy, or we may cause display FIFO underruns leading to ugly flicker.

Fixes fdo bug #24314, kernel bug #15043.
Tested-by: NAlexander Lam <lambchop468@gmail.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: Julien Cristau <jcristau@debian.org> (fd.o #25371)
Cc: stable@kernel.org
Signed-off-by: NEric Anholt <eric@anholt.net>

An untiled framebuffer must be aligned to 64k. This is normally handled
by intel_pin_and_fence_fb_obj(), but the intelfb_create() likes to be
different and do the pinning itself. However, it aligns the buffer
object incorrectly for pre-i965 chipsets causing a PGTBL_ERR when it is
installed onto the output.

Fixes:
  KMS error message while initializing modesetting -
  render error detected: EIR: 0x10 [i915]
  http://bugs.freedesktop.org/show_bug.cgi?id=22936Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Signed-off-by: NEric Anholt <eric@anholt.net>

Before changing the status of a buffer with a pending write we will await
upon a new flush for that buffer. So we can take advantage of any flushes
posted whilst the buffer is active and pending processing by the GPU, by
clearing its write_domain and updating its last_rendering_seqno -- thus
saving a potential flush in deep queues and improves flushing behaviour
upon eviction for both GTT space and fences.

In order to reduce the time spent searching the active list for matching
write_domains, we move those to a separate list whose elements are
the buffers belong to the active/flushing list with pending writes.

Orignal patch by Chris Wilson <chris@chris-wilson.co.uk>, forward-ported
by me.

In addition to better performance, this also fixes a real bug. Before
this changes, i915_gem_evict_everything didn't work as advertised. When
the gpu was actually busy and processing request, the flush and subsequent
wait would not move active and dirty buffers to the inactive list, but
just to the flushing list. Which triggered the BUG_ON at the end of this
function. With the more tight dirty buffer tracking, all currently busy and
dirty buffers get moved to the inactive list by one i915_gem_flush operation.

I've left the BUG_ON I've used to prove this in there.

References:
  Bug 25911 - 2.10.0 causes kernel oops and system hangs
  http://bugs.freedesktop.org/show_bug.cgi?id=25911

  Bug 26101 - [i915] xf86-video-intel 2.10.0 (and git) triggers kernel oops
              within seconds after login
  http://bugs.freedesktop.org/show_bug.cgi?id=26101Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Tested-by: NAdam Lantos <hege@playma.org>
Cc: stable@kernel.org
Signed-off-by: NEric Anholt <eric@anholt.net>

Got Ironlake DPLL parameter table, which reflects the hardware
optimized values. So this one trys to list DPLL parameters for
different output types, should potential fix clock issue seen
on new Arrandale CPUs.

This fixes DPLL setting failure on one 1920x1080 dual channel
LVDS for Ironlake. Test has also been made on LVDS panels with
smaller size and CRT/HDMI/DP ports for different monitors on
their all supported modes.

Update:
- Change name of double LVDS to dual LVDS.
- Fix SSC 120M reference clock to use the right range.

Cc: CSJ <changsijay@gmail.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Following a gpu hang, we would leak the relocation buffer. So simply
earrange the error path to always free the relocation buffer.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NEric Anholt <eric@anholt.net>

acpi_lid_open() could take up to 10ms on my computer.  Some component is
calling the drm GETCONNECTOR ioctl many times in a row.  This results in
flickering (for example, when starting a video).  Fix it by assuming an
always connected lid status.
Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Signed-off-by: NEric Anholt <eric@anholt.net>

Self Refresh should be disabled on dual plane configs.  Otherwise, as
the SR watermark is not calculated for such configs, switching to non
VGA mode causes FIFO underrun and display flicker.

This fixes Korg Bug #14897.
Signed-off-by: NDavid John <davidjon@xenontk.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Cc: stable@kernel.org
Signed-off-by: NEric Anholt <eric@anholt.net>

This patch adds support for page flipping on Ironlake, which uses
different interrupt bits for triggering flip submit IRQs.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
[anholt: hand-resolved for rebasing off of render power saving patch]
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Reported-by: NPhilipp Kohlbecher <xt28@gmx.de>
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Zhenyu noticed that the ironlake vblank enabling patch has one
issue that it will trigger vblank starting from irq postinstall,
this isn't necessary. This patch addresses this issue by only
adding the vblank into DEIER but mask them in DEIMR, so that it
won't trigger vblank interrupt at irq install.
Signed-off-by: NLi Peng <peng.li@intel.com>
Acked-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Having missed the ENOMEM return via i915_gem_fault(), there are probably
other paths that I also missed. By not enabling NORETRY by default these
paths can run the shrinker and take memory from the system (but not from
our own inactive lists because our shrinker can not run whilst we hold
the struct mutex) and this may allow the system to survive a little longer
whilst our drivers consume all available memory.

References:
  OOM killer unexpectedly called with kernel 2.6.32
  http://bugzilla.kernel.org/show_bug.cgi?id=14933

v2: Pass gfp into page mapping.
v3: Use new read_cache_page_gfp() instead of open-coding.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The first page flip queued will replace the current front buffer, which
should have a 0 pending flip count.  So at finish time we need to handle
that case (i.e. if the flip count is 0 *or* dec_and_test is 0 we need to
wake the waiters).

Also fix up an error path in the queue function and add some debug
output (only enabled with driver debugging).
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NEric Anholt <eric@anholt.net>

Pineview doesn't has CXSR and need GTT-based hardware status page.
It fixes a X boot hung issue on Pinview since commit cfdf1f
Signed-off-by: NLi Peng <peng.li@intel.com>
Acked-by: NZhao Yakui <yakui.zhao@intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

so far vblank interrupt on ironlake is disabled, this would cause
bad gfx performance if userspace calls drm_wait_vblank. This patch
enables vblank interrupt on ironlake and follows vblank get/put
model.
Signed-off-by: NLi Peng <peng.li@intel.com>
Acked-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

X.org hang with [drm:i915_gem_do_execbuffer] *ERROR* in dmesg
  http://bugzilla.kernel.org/show_bug.cgi?id=15114

Matej found he was hitting an error path within i915_gem_do_execbuffer()
that led to the attempt to dereference an uninitialised pointer during
cleanup. This path used to be safe as we used to calloc the object
lists, but this was changed in c8e0f93a. Daniel Vetter had also spotted
this error and proposed a similar patch.

[ 6379.732892] [drm:i915_gem_do_execbuffer] *ERROR* Object ffff880098cd6540 appears more than once in object list
[ 6379.740976] [drm:i915_gem_do_execbuffer] *ERROR* Object ffff880098cd6540 appears more than once in object list
[ 6379.740995] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0
[ 6379.740998] IP: [<ffffffff8122ddb5>] i915_gem_do_execbuffer+0xba5/0x1260
[ 6379.741006] PGD babab067 PUD bb435067 PMD 0
[ 6379.741010] Oops: 0002 [#1] PREEMPT SMP
[ 6379.741014] last sysfs file: /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/ieee80211/phy0/rfkill0/state
[ 6379.741017] CPU 1
[ 6379.741021] Pid: 2186, comm: X Not tainted 2.6.33-rc4-00399-g24bc7347 #142 M11D/ESPRIMO Mobile M9400
[ 6379.741023] RIP: 0010:[<ffffffff8122ddb5>] [<ffffffff8122ddb5>] i915_gem_do_execbuffer+0xba5/0x1260
[ 6379.741027] RSP: 0018:ffff8800b9047b78  EFLAGS: 00213206
[ 6379.741029] RAX: 0000000000000000 RBX: 000000000000004f RCX: ffff880098cac800
[ 6379.741032] RDX: ffff880098caca78 RSI: ffff8800b9047c98 RDI: ffff880098cd6540
[ 6379.741034] RBP: ffff8800b9047c78 R08: ffffffff814b96b5 R09: 0000000000000006
[ 6379.741036] R10: 0000000000000000 R11: 0000000000000003 R12: 000000000000004e
[ 6379.741038] R13: 00000000fffffff7 R14: 0000000000000000 R15: 0000000000000001
[ 6379.741041] FS:  0000000000000000(0000) GS:ffff880001900000(0063) knlGS:00000000f72636c0
[ 6379.741043] CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
[ 6379.741041] FS:  0000000000000000(0000) GS:ffff880001900000(0063) knlGS:00000000f72636c0
[ 6379.741043] CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
[ 6379.741045] CR2: 00000000000000a0 CR3: 00000000b9000000 CR4: 00000000000006e0
[ 6379.741048] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 6379.741050] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 6379.741052] Process X (pid: 2186, threadinfo ffff8800b9046000, task ffff8800bb5d8000)
[ 6379.741054] Stack:
[ 6379.741055]  ffffc90023f57000 ffffc90023f56fff ffffc90023f56fff ffffc90023f55000
[ 6379.741059] <0> ffff8800b9047c98 ffff8800bb43c840 ffff8800bf1de800 ffff8800bf1de820
[ 6379.741063] <0> ffff8800b9047bd8 ffff880098cac800 0000000000000000 0000000000000002
[ 6379.741068] Call Trace:
[ 6379.741072]  [<ffffffff8122e6cb>] ?  i915_gem_execbuffer+0x6b/0x370
[ 6379.741077]  [<ffffffff810a5f52>] ? __vmalloc_node+0xa2/0xb0
[ 6379.741080]  [<ffffffff8122e6cb>] ?  i915_gem_execbuffer+0x6b/0x370
[ 6379.741083]  [<ffffffff8122e816>] i915_gem_execbuffer+0x1b6/0x370
[ 6379.741086]  [<ffffffff8120cd55>] drm_ioctl+0x1d5/0x460
[ 6379.741089]  [<ffffffff8122e660>] ?  i915_gem_execbuffer+0x0/0x370
[ 6379.741093]  [<ffffffff81248c35>] i915_compat_ioctl+0x45/0x50
[ 6379.741097]  [<ffffffff810f1659>] compat_sys_ioctl+0xa9/0x1570
[ 6379.741102]  [<ffffffff810b1d5c>] ? vfs_read+0x13c/0x1a0
[ 6379.741106]  [<ffffffff81028424>] sysenter_dispatch+0x7/0x2b
[ 6379.741108] Code: 08 85 c0 74 52 31 db 0f 1f 80 00 00 00 00 48 63 c3 48 8b
8d 68 ff ff ff 48 8d 14 c1 48 8b 02 48 85 c0 74 25 48 8b 80 80 00 00 00 <c7> 80
a0 00 00 00 00 00 00 00 48 8b 3a 48 85 ff 74 0c 48 c7 c6
[ 6379.741142] RIP  [<ffffffff8122ddb5>] i915_gem_do_execbuffer+0xba5/0x1260
[ 6379.741145]  RSP <ffff8800b9047b78>
[ 6379.741147] CR2: 00000000000000a0
[ 6379.741159] ---[ end trace 0598809afa4c31db ]---
Reported-by: NMatej Laitl <strohel@gmail.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NEric Anholt <eric@anholt.net>

This tries to fix CRT detect loop hang seen on some Ironlake form
factor, to clear up hotplug detect state before taking CRT detect
to make sure next hotplug detect cycle is consistent.

Cc: Stable Team <stable@kernel.org>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

This enables possible 36bit address mask on 965G that use physical
address for hw status page.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

eDP could be on pipe A or B.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Original DP mode_valid check didn't take pixel color depth into account,
which made one 1600x900 eDP panel's mode check invalid because of overclock,
but actually this 6bpc panel does can work with x1 lane at 2.7G. This one
trys to take bpp value properly both in mode validation and mode setting.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Many platform support this feature, and it can provide significant
power savings when the reduced refresh rate is low.  However, on some
platforms a secondary (reduced) timing is provided but not actually
supported by the hardware.  This results in undesirable flicker at
runtime.

So disable the feature by default, but allow users to opt-in to the
reduced clock behavior with a new module parameter, lvds_downclock,
that can be set to 1 to enable the feature.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NEric Anholt <eric@anholt.net>

Suggested-by: NChris Wilson <chris@chris-wilson.co.uk&gt;>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> (in principle)
Signed-off-by: NEric Anholt <eric@anholt.net>

On Ironlake, there is an interrupt master control bit. With the bit
disabled before clearing IIR, we do not need to handle extra interrupt
in a loop. This patch removes the loop in Ironlake interrupt handler.
It fixed irq lost issue on some Ironlake platforms.

Cc: Stable Team <stable@kernel.org>
Signed-off-by: NZou Nan hai <Nanhai.zou@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

When we setup buffer for display plane, we'll check any pending
required GPU flush and possible make interruptible wait for flush
complete. But that wait would be most possibly to fail in case of
signals received for X process, which will then fail modeset process
and put display engine in unconsistent state. The result could be
blank screen or CPU hang, and DDX driver would always turn on outputs
DPMS after whatever modeset fails or not.

So this one creates new helper for setup display plane buffer, and
when needing flush using uninterruptible wait for that.

This one should fix bug like https://bugs.freedesktop.org/show_bug.cgi?id=24009.
Also fixing mode switch stress test on Ironlake.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

There exist multiple DDC buses for the SDVO cards with multiple outputs.
When we can't get the EDID by using the select DDC bus, we can try the other
possible DDC bus to see whether the EDID can be obtained.

https://bugs.freedesktop.org/show_bug.cgi?id=23842Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Tested-by: NSebastien Caty <sebastien.caty@mrnf.gouv.qc.ca>
Signed-off-by: NEric Anholt <eric@anholt.net>

For some SDVO cards based on conexant chip, we can't read the EDID if
we don't read the response after issuing SDVO DDC bus switch
command.

From the SDVO spec once when another I2C transaction is finished after
completing the I2C transaction of issuing the bus switch command, it
will be switched back to the SDVO internal state again. So we can't
initiate a new I2C transaction to read the response after issuing the
DDC bus switch command. Instead we should issue DDC bus switch command
and read the response in the same I2C transaction.

https://bugs.freedesktop.org/show_bug.cgi?id=23842
https://bugs.freedesktop.org/show_bug.cgi?id=24458
https://bugs.freedesktop.org/show_bug.cgi?id=24522
https://bugs.freedesktop.org/show_bug.cgi?id=24282Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Tested-by: NSebastien Caty <sebastien.caty@mrnf.gouv.qc.ca>
Signed-off-by: NEric Anholt <eric@anholt.net>

On some boxes the BIOS will report different child device arrays when
the system is booted with/without the dock. In such case the HDMI/DP
port can't be setup correctly.  So revert two commits
(fc816655/
6e36595a) that use the child device
parsed from VBT to setup HDMI/DP.

http://bugzilla.kernel.org/show_bug.cgi?id=14854
http://bugzilla.kernel.org/show_bug.cgi?id=14860Signed-off-by: NZhao Yakui <yakui.zhao@intel.com>
Tested-by: NSean Young <sean@mess.org>
Signed-off-by: NEric Anholt <eric@anholt.net>

Commit cbda12d7 (drm/i915: implement
new pm ops for i915), among other things, removed the .suspend and
.resume pointers from the struct drm_driver object in i915_drv.c,
which broke resume without KMS on my MSI Wind U100.

Fix this by reverting that part of commit cbda12d7.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
[anholt: added comment explaining when .suspend/.resume matter]
Signed-off-by: NEric Anholt <eric@anholt.net>

Commit cbda12d7 (drm/i915: implement
new pm ops for i915), among other things, removed the .suspend and
.resume pointers from the struct drm_driver object in i915_drv.c,
which broke resume without KMS on my MSI Wind U100.

Fix this by reverting that part of commit cbda12d7.

[ The DRM layer will not use the class-specific suspend/resume functions
  if the driver is marked MODESET-aware, and conversely it will not
  register the PCI device if the drievr isn't so marked, so you always
  end up with _either_ the drm-class suspend/resume _or_ the PCI layer
  PM functionality, never both.  - Linus ]
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>