- 25 2月, 2010 2 次提交
-
-
由 Maarten Maathuis 提交于
- Without this change I get a general protection fault. - Also use PTR_ERR where applicable. Signed-off-by: NMaarten Maathuis <madman2003@gmail.com> Reviewed-by: NDave Airlie <airlied@redhat.com> Acked-by: NThomas Hellstrom <thellstrom@vmware.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
The whole attribute table is valid for shr/shl ops. Fixes fdo bug 26668 Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 23 2月, 2010 8 次提交
-
-
由 Thomas Hellstrom 提交于
Intercept query commands and apply relocations to their guest pointers. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
This also modifies the unused PRAMIN PT entries to be all zeroes, can't really recall why I used 9/0 initially, just that it didn't work for some reason. It was likely masking a bug elsewhere that's since been fixed. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
This commit changes nouveau to construct PTEs which look very much like the ones the binary driver creates. I presume that filling multiple PTEs identically with length flags and the physical address of the start of a block of VRAM is a hint to the memory controller that it need not perform additional page table lookups for that range of addresses. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
GART is handled elsewhere, no reason to have the code for it here too. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Rafael J. Wysocki 提交于
Commit 84b79f8d (drm/i915: Fix crash while aborting hibernation) attempted to fix a regression introduced by commit cbda12d7 (drm/i915: implement new pm ops for i915), but it went too far trying to split the freeze/suspend and resume/thaw parts of the code. As a result, it introduced another regression, which only is visible on some systems. Fix the problem by merging i915_drm_suspend() with i915_drm_freeze() and moving some code from i915_resume() into i915_drm_thaw(), so that intel_opregion_free() and intel_opregion_init() are also executed in the freeze and thaw code paths, respectively. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Reported-and-tested-by: NPedro Ribeiro <pedrib@gmail.com> Tested-by: NTino Keitel <tino.keitel@tikei.de> Acked-by: NEric Anholt <eric@anholt.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 2月, 2010 6 次提交
-
-
由 Dave Airlie 提交于
This lets UMS userspace know the rv740 fix is in. For KMS we can consider the kernel release to be the v2.0.0 release so we don't need the bump there. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
If at IB free time fence wasn't emited that means the IB wasn't scheduled because an error occured somewhere, thus we can free then fence and mark the IB as free. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Francisco Jerez 提交于
http://bugzilla.kernel.org/show_bug.cgi?id=15328 This fixes a serious regression on AGP/non-PAT systems, where pages were ending up in the wrong state and slowing down the whole system. [airlied: taken this from the bug as the other option is to revert the change which caused it]. Tested-by: John W. Linville (in bug). Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
This patch fixes occlusion queries and rendering errors on rv740 boards. Hardcoding the backend map is not an optimal solution, but a better fix is being worked on. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Just compare the i2c id since the i2c structs may be slighly different. Fixes fdo bug 26616. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
rs600 board lists DVI port as HDMI. Fixes fdo bug 26605 Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 18 2月, 2010 5 次提交
-
-
由 Jerome Glisse 提交于
Previous code did associate fence to bo before the fence was emited and it also didn't lock protected access to ttm sync_obj member. Both of this flaw leads to possible race between different code path. This patch fix this by associating fence only once the fence is emitted and properly lock protect access to sync_obj member of ttm. Fix: https://bugs.freedesktop.org/show_bug.cgi?id=26438 and likely similar others bugs Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
There is 3 different distinct states for an indirect buffer (IB) : 1- free with no fence 2- free with a fence 3- non free (fence doesn't matter) Previous code mixed case 2 & 3 in a single one leading to possible catastrophique failure. This patch rework the handling and properly separate each case. So when you get ib we set the ib as non free and fence status doesn't matter. Fence become active (ie has a meaning for the ib code) once the ib is scheduled or free. This patch also get rid of the alloc bitmap as it was overkill, we know go through IB pool list like in a ring buffer as the oldest IB is the first one the will be free. Fix : https://bugs.freedesktop.org/show_bug.cgi?id=26438 and likely other bugs. V2 remove the scheduled list, it's useless now, fix free ib scanning Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Adam Jackson 提交于
cf. https://bugzilla.redhat.com/show_bug.cgi?id=533561Signed-off-by: NAdam Jackson <ajax@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
When the vmwgfx module is loaded on top of vesafb, it would operate in stealth mode in parallel with vesafb, evicting VRAM on dropmaster. Change that to use the vesafb handover mechanism, like other drmfb drivers. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
For usec delays use udelay instead of scheduling, this should allow reclocking to happen faster. This also was the cause of reported 33s delays at bootup on certain systems. fixes: freedesktop.org bug 25506 Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 16 2月, 2010 3 次提交
-
-
由 Zhang Rui 提交于
Wrong Lid state reported. Need to blacklist this machine for LVDS detection. Signed-off-by: NZhang Rui <rui.zhang@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 15 2月, 2010 4 次提交
-
-
由 Dave Airlie 提交于
In testing I've never seen it go past 1 retry anyways but better safe than sorry. Reported by Droste on irc. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Matt Turner 提交于
Noticed on a DEC Alpha. Start up into console mode caused 15 unaligned accesses, and starting X caused another 48. Signed-off-by: NMatt Turner <mattst88@gmail.com> CC: Jerome Glisse <jglisse@redhat.com> CC: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
If the buffer object was already in the requested memory type, but outside of the requested range it was never moved into the requested range. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
When searching for free space in a range, the function could return a node extending outside of the given range. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 11 2月, 2010 12 次提交
-
-
由 Pavel Roskin 提交于
Signed-off-by: NPavel Roskin <proski@gnu.org> [clemens@ladisch.de: merged into drm_fb_helper] Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
a patch from Roel was wrong, fix this properly, really if the fb ptrs are different fb changed shuold be true. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Andy Shevchenko 提交于
Kernel has simple_strtol() which would be used as atoi(). This is quite the same fix as in 2cb96f86 ("fbdev: drop custom atoi from drivers/video/modedb.c") because code in drivers/gpu/drm/drm_fb_helper.c is based on drivers/video/modedb.c. Signed-off-by: NAndy Shevchenko <ext-andriy.shevchenko@nokia.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
These ioctls are all protected by their own locking mechanisms so should be fine to not bother locking around. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Luca Barbieri 提交于
Mostly obvious simplifications. The i915 pread/pwrite ioctls, intel_overlay_put_image and nouveau_gem_new were incorrectly using the locked versions without locking: this is also fixed in this patch. Signed-off-by: NLuca Barbieri <luca@luca-barbieri.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Luca Barbieri 提交于
This patch introduces the drm_gem_object_unreference_unlocked and drm_gem_object_handle_unreference_unlocked functions that do not require holding struct_mutex. drm_gem_object_unreference_unlocked calls the new ->gem_free_object_unlocked entry point if available, and otherwise just takes struct_mutex and just calls ->gem_free_object Signed-off-by: NLuca Barbieri <luca@luca-barbieri.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
ATOM appears to return 0x20 which seems to mean some sort of timeout. retry the transaction up to 10 times before failing, this makes DP->VGA convertor we bought work at least a bit more predictably. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Pauli Nieminen 提交于
radeon_copy_dma is only available for r200 or newer cards. Call to radeon_copy_dma would result to NULL pointer dereference if benchmarking asic without dma engine. Signed-off-by: NPauli Nieminen <suokkos@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jakob Bornecrantz 提交于
Even if this bumps the version to 1 it does not mean the driver is out of staging. From what we know this is the last backwards incompatible change to the driver. Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jakob Bornecrantz 提交于
Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
When time-based throttling is implemented, we need to bump minor. When the old way of detecting scanout is removed, we need to bump major. In the meantime, this change should not break existing user-space. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NJakob Bornecrantz <jakob@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-