- 12 1月, 2016 2 次提交
-
-
由 Wang Nan 提交于
After this patch other directories can use this architecture detector without directly including it from perf's directory. Libbpf would utilize it to get proper $(ARCH) so it can receive correct uapi include directory. Tested-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Signed-off-by: NWang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1452520124-2073-8-git-send-email-wangnan0@huawei.com [ Add missing srctree definition in tests/make ] Signed-off-by: NArnaldo Carvalho de Melo <acme@kernel.org>
-
由 Wang Nan 提交于
On some system the perf-config is broken, causes link failure like this: /usr/lib64/python2.7/config/libpython2.7.a(posixmodule.o): In function `posix_forkpty': /opt/wangnan/yocto-build/tmp-eglibc/work/x86_64-oe-linux/python/2.7.3-r0.3.1/Python-2.7.3/./Modules/posixmodule.c:3816: undefined reference to `forkpty' /usr/lib64/python2.7/config/libpython2.7.a(posixmodule.o): In function `posix_openpty': /opt/wangnan/yocto-build/tmp-eglibc/work/x86_64-oe-linux/python/2.7.3-r0.3.1/Python-2.7.3/./Modules/posixmodule.c:3756: undefined reference to `openpty' collect2: error: ld returned 1 exit status make[1]: *** [/home/wangnan/kernel-hydrogen/tools/perf/out/perf] Error 1 make: *** [all] Error 2 $ python-config --libs -lpthread -ldl -lpthread -lutil -lm -lpython2.7 In this case a '-lutil' should be appended to -lpython2.7. (I know we have --start-group and --end-group. I can see them in command line of collect2 by strace. However it doesn't work. Seems I have a broken environment?) Signed-off-by: NWang Nan <wangnan0@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1452520124-2073-2-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 09 1月, 2016 1 次提交
-
-
由 Namhyung Kim 提交于
Currently perf report only shows a help message "For a higher level overview, try: perf report --sort comm,dso" unconditionally (even if the sort keys were used). Add more help tips and show randomly. Load tips from ${prefix}/share/doc/perf-tip/tips.txt file. $ perf report | tail 0.10% swapper [kernel.vmlinux] [k] irq_exit 0.09% swapper [kernel.vmlinux] [k] flush_smp_call_function_queue 0.08% swapper [kernel.vmlinux] [k] native_write_msr_safe 0.03% swapper [kernel.vmlinux] [k] group_sched_in 0.01% perf [kernel.vmlinux] [k] native_write_msr_safe # # (Tip: Search options using a keyword: perf report -h <keyword>) # Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Acked-by: NIngo Molnar <mingo@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1452166913-27046-1-git-send-email-namhyung@kernel.org [ Renamed it to perf_tip() and the parameter dirname to dirpath to fix the build on older distros ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 07 1月, 2016 1 次提交
-
-
由 Jiri Olsa 提交于
We decide what dwarf unwind to choose way after the Makefile.feature makefile is included. The $(dwarf-post-unwind) is not even set at that time. For the same reason it was never included in FEATURE-DUMP file. Moving it into perf VF=1 verbose display. $ make VF=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... ... LIBUNWIND_DIR: ... LIBDW_DIR: ... DWARF post unwind library: libunwind ... Signed-off-by: NJiri Olsa <jolsa@kernel.org> Tested-by: NWang Nan <wangnan0@huawei.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama <pi3orama@163.com> Link: http://lkml.kernel.org/r/1450893514-9158-3-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 11 12月, 2015 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
This reverts commit e8b7ea43. Martin created a gcc PR: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68836Reported-by: NJiri Olsa <jolsa@redhat.com> Acked-by: NIngo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Martin Liska <mliska@suse.cz> Cc: Namhyung Kim <namhyung@kernel.org>, Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20151202164827.GA21124@krava.brq.redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 19 11月, 2015 1 次提交
-
-
由 Wang Nan 提交于
If both LIBBPF and DWARF are detected, it is possible to create prologue for eBPF programs to help them access kernel data. HAVE_BPF_PROLOGUE and CONFIG_BPF_PROLOGUE are added as flags for this feature. PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET is introduced in commit 63ab024a ("perf tools: regs_query_register_offset() infrastructure"), which indicates that an architecture supports converting name of a register to its offset in 'struct pt_regs'. Without this support, BPF_PROLOGUE should be turned off. Signed-off-by: NWang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1447675815-166222-9-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 28 10月, 2015 1 次提交
-
-
由 Wang Nan 提交于
By adding libbpf into perf's Makefile, this patch enables perf to build libbpf if libelf is found and neither NO_LIBELF nor NO_LIBBPF is set. The newly introduced code is similar to how libapi and libtraceevent are wired into Makefile.perf. MANIFEST is also updated for 'make perf-*-src-pkg'. Append make_no_libbpf to tools/perf/tests/make. The 'bpf' feature check is appended into default FEATURE_TESTS and FEATURE_DISPLAY, so perf will check the API version of bpf in /path/to/kernel/include/uapi/linux/bpf.h. Which should not fail except when we are trying to port this code to an old kernel. Error messages are also updated to notify users about the lack of BPF support in 'perf record' if libelf is missing or the BPF API check failed. tools/lib/bpf is added to TAG_FOLDERS to allow us to navigate libbpf files when working on perf using tools/perf/tags. Signed-off-by: NWang Nan <wangnan0@huawei.com> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-2-git-send-email-wangnan0@huawei.com [ Document NO_LIBBPF in Makefile.perf, noted by Jiri Olsa ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 18 9月, 2015 2 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
The auxtrace code needed by Intel PT uses the __get_cpuid() gcc builtin, that is not present in old systems, breaking the build. Add a test to check for that builtin and disable AUXTRACE in those systems. [acme@rhel5 linux]$ make NO_LIBPERL=1 -C tools/perf O=/tmp/build/perf install-bin make: Entering directory `/home/acme/git/linux/tools/perf' BUILD: Doing 'make -j2' parallel build Auto-detecting system features: <SNIP> ... lzma: [ on ] ... get_cpuid: [ OFF ] <SNIP> config/Makefile:630: Your gcc lacks the __get_cpuid() builtin, disables support for auxtrace/Intel PT, please install a newer gcc MKDIR /tmp/build/perf/util/ <SNIP> This fixes the build on old systems such as RHEL/CentOS 5.11. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Victor Kamensky <victor.kamensky@linaro.org> Cc: Vinson Lee <vlee@twopensource.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-d4puslul0jltoodzpx9r4sje@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
The existing numa test checks only if numa.h and numa_available() are present, but that can be satisfied with an old libnuma that is not enough for the 'perf bench numa' entry, so add a test to check for that: [acme@rhel5 linux]$ make NO_AUXTRACE=1 NO_LIBPERL=1 -C tools/perf O=/tmp/build/perf install-bin make: Entering directory `/home/acme/git/linux/tools/perf' BUILD: Doing 'make -j2' parallel build Auto-detecting system features: ... libelf: [ on ] ... libnuma: [ on ] ... numa_num_possible_cpus: [ OFF ] ... libperl: [ on ] <SNIP> config/Makefile:577: Old numa library found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev >= 2.0.8 INSTALL binaries <SNIP> This fixes the build on old systems such as RHEL/CentOS 5.11. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Victor Kamensky <victor.kamensky@linaro.org> Cc: Vinson Lee <vlee@twopensource.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-zqriqkezppi2de2iyjin1tnc@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 15 9月, 2015 1 次提交
-
-
由 Wang Nan 提交于
regs_query_register_offset() is a helper function which converts register name like "%rax" to offset of a register in 'struct pt_regs', which is required by BPF prologue generator. PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET indicates an architecture supports converting name of a register to its offset in 'struct pt_regs'. HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET is introduced as the corresponding CFLAGS of PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET. Signed-off-by: NWang Nan <wangnan0@huawei.com> Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1441523623-152703-19-git-send-email-wangnan0@huawei.comSigned-off-by: NHe Kuang <hekuang@huawei.com> [ Extracted from eBPF patches ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 14 8月, 2015 1 次提交
-
-
由 Andi Kleen 提交于
The Fedora 22 version of libdw requires a couple of extra libraries to link. With a dynamic link the dependencies are pulled in automatically, but this doesn't work for static linking. Add the needed libraries explicitely to the feature probe and the Makefile. v2: Explicitly check for static linking and only add the dependencies when -static is set. This is to avoid regressions on Arnaldo's system. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/1439419717-20601-1-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 29 7月, 2015 1 次提交
-
-
由 Pawel Moll 提交于
When building with a prefix ending with a slash, for example: $ make prefix=/usr/local/ one of the perf tests fail to compile due to BUILD_STR macro mishandling bindir_SQ string containing with two slashes: -DBINDIR="BUILD_STR(/usr/local//bin)" with the following error: CC tests/attr.o tests/attr.c: In function ‘test__attr’: tests/attr.c:168:50: error: expected ‘)’ before ‘;’ token snprintf(path_perf, PATH_MAX, "%s/perf", BINDIR); ^ tests/attr.c:176:1: error: expected ‘;’ before ‘}’ token } ^ tests/attr.c:176:1: error: control reaches end of non-void function [-Werror=return-type] } ^ cc1: all warnings being treated as errors This patch works around the problem by "cleaning" the bindir string using make's abspath function. Signed-off-by: NPawel Moll <pawel.moll@arm.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1438092613-21014-1-git-send-email-pawel.moll@arm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 21 7月, 2015 2 次提交
-
-
由 Sergei Trofimovich 提交于
Under dash 'echo -n' yields '-n' to stdout. Use printf "" instead. Signed-off-by: NSergei Trofimovich <siarheit@google.com> Acked-by: NIngo Molnar <mingo@kernel.org> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1437298205-29305-1-git-send-email-siarheit@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
I.e.: $ cat ~/share/perf-core/strace/groups/file access chmod creat execve faccessat getcwd lstat mkdir open openat quotactl readlink rename rmdir stat statfs symlink unlink $ Then, on a quiet desktop, try running this and then moving your mouse to see the deluge of mouse related activity: # perf probe 'vfs_getname=getname_flags:72 pathname=filename:string' Added new event: probe:vfs_getname (on getname_flags:72 with pathname=filename:string) You can now use it in all perf tools, such as: perf record -e probe:vfs_getname -aR sleep 1 # # trace --ev probe:vfs_getname --filter-pids 2232 -e file 0.042 (0.042 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.042 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/xterm") 0.100 (0.100 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.142 (0.018 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.142 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/index.theme") 0.192 (0.069 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.230 (0.017 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.230 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/usr/share/icons/Adwaita/cursors/xterm") 0.253 (0.041 ms): mousetweaks/2235 ... [continued]: open()) = 14 0.459 (0.008 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.459 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/left_side") 0.468 (0.017 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory Need to combine that raw_syscalls:sys_enter(open) + probe:vfs_getname + raw_syscalls:sys_exit(open) sequence... Now, if you're bored, please write some more syscall groups, like the ones in 'strace' and send it our way :-) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Milian Wolff <mail@milianw.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-a42xklu59lcbxp7bbnic74a8@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 02 7月, 2015 1 次提交
-
-
由 Aaro Koskinen 提交于
Create config.detected into OUTPUT directory instead of source directory. This fixes parallel builds that share the same source directory. Signed-off-by: NAaro Koskinen <aaro.koskinen@nokia.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1435751683-18500-1-git-send-email-aaro.koskinen@nokia.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 27 5月, 2015 2 次提交
-
-
由 Martin Liska 提交于
Correct debugging experience is given by passing -Og to compiler. Do it in a way that supports older compilers Signed-off-by: NMartin Liska <mliska@suse.cz> Acked-by: NIngo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/5564393C.1090104@suse.czSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
The libunwind feature would never detect because of the following error: $ cat tools/build/feature/test-libunwind.make.output /usr/lib/gcc/i686-linux-gnu/4.8/../../../i386-linux-gnu/libunwind-x86.so: undefined reference to `lzma_stream_buffer_decode' /usr/lib/gcc/i686-linux-gnu/4.8/../../../i386-linux-gnu/libunwind-x86.so: undefined reference to `lzma_index_uncompressed_size' /usr/lib/gcc/i686-linux-gnu/4.8/../../../i386-linux-gnu/libunwind-x86.so: undefined reference to `lzma_index_end' /usr/lib/gcc/i686-linux-gnu/4.8/../../../i386-linux-gnu/libunwind-x86.so: undefined reference to `lzma_index_buffer_decode' /usr/lib/gcc/i686-linux-gnu/4.8/../../../i386-linux-gnu/libunwind-x86.so: undefined reference to `lzma_stream_footer_decode' /usr/lib/gcc/i686-linux-gnu/4.8/../../../i386-linux-gnu/libunwind-x86.so: undefined reference to `lzma_index_size' collect2: error: ld returned 1 exit status Fix by adding -llzma and re-ordering to match the dependencies. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Link: http://lkml.kernel.org/r/1432040746-1755-3-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 09 5月, 2015 1 次提交
-
-
由 Naveen N. Rao 提交于
We get a linker error if we try to build with NO_DWARF since we build util/unwind-libdw.c, but do not include -ldw Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1430306131-6780-1-git-send-email-naveen.n.rao@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 06 5月, 2015 1 次提交
-
-
由 Adrian Hunter 提交于
Add build option NO_AUXTRACE to exclude compiling support for AUX area tracing. Support for both recording and processing is excluded and by implication any future additions such as Intel PT and Intel BTS will also not be compiled in with this option. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1430404667-10593-5-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 30 3月, 2015 1 次提交
-
-
由 Jiri Olsa 提交于
Disabling libbabeltrace check by default and replacing the NO_LIBBABELTRACE make variable with LIBBABELTRACE. Users wanting the libbabeltrace feature need to build via: $ make LIBBABELTRACE=1 The reason for this is that the libababeltrace interface we use (version 1.3) hasn't been packaged/released yet, thus the failing feature check only slows down build and confuses other (non CTF) developers. Requested-by: NIngo Molnar <mingo@kernel.org> Signed-off-by: NJiri Olsa <jolsa@kernel.org> Acked-by: NIngo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20150328103030.GA8431@krava.redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 22 3月, 2015 4 次提交
-
-
由 Jiri Olsa 提交于
In short, Fedora compresses kernel modules now (since version 21) with lzma compression. Adding lzma decompress support into the dso.c:compressions array introduced by Namhyung earlier. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Acked-by: NNamhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-2glp65kdtbrk0gblmirsjsnt@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Moving feature checks code under tools/build directory. Changing also $feature_dir to point to new feature directory location and perf Makefiles to include Makefile.feature from new location. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <david.ahern@oracle.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-3lamtb30dhf4wo99y1n8kxg0@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Move feature related code into separate makefile. The new Makefile.feature is included from config/Makefile. It will be moved later into tools/build. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <david.ahern@oracle.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-kj76wphg05x83n6d5ff85ybx@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
We have 2 feature_check functions, which conflict with each other. Fixing it by renaming the latter to feature_display_check. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <david.ahern@oracle.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-wmyccro6qeffseforipu5kcl@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 20 3月, 2015 1 次提交
-
-
由 H.J. Lu 提交于
Commit: c6e5e9fb ("perf tools: Fix building error in x86_64 when dwarf unwind is on") removed the definition of IS_X86_64 but not all places using it, with the consequence that perf-read-vdsox32 would not be built anymore, and the default lib install directory was 'lib' instead of 'lib64'. Also needs to go to v3.19. Signed-off-by: NH.J. Lu <hjl.tools@gmail.com> Acked-by: NAdrian Hunter <adrian.hunter@intel.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: stable@vger.kernel.org # 3.19 Link: http://lkml.kernel.org/r/CAMe9rOqpGVq3D88w+D15ef7sv6G6k57ZeTvxBm46=WFgzo9p1w@mail.gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 19 3月, 2015 9 次提交
-
-
由 Jiri Olsa 提交于
As it has nothing to do with features and won't be moved into tools/build. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <david.ahern@oracle.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-6qgf37nss4wwjatgj5i4ng0o@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Preparing for feature checks separation, moving related stuff under 'FEATURE*' namespace. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <david.ahern@oracle.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-v9oo22ra70rrk1dy495a7bjc@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Preparing for feature checks separation, moving related stuff under 'feature*' namespace. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <david.ahern@oracle.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-ciaflab01mf0ljmfb9xr4p41@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Preparing for feature checks separation, moving related stuff under 'feature*' namespace. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <david.ahern@oracle.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-t72o4nwx81owjv14y43b2wpf@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
It only contains (FEATURE_TESTS - FEATURE_DISPLAY) tests to display the rest of the checks on 'make VF=1'. But we can actually compute this list, which is less confusing. Also renaming LIB_FEATURE_TESTS into FEATURE_DISPLAY, so it reflects what this variable actually does - display its tests status to user. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <david.ahern@oracle.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-gs160y03hpmx5ezpcr4gunxc@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Preparing for feature checks separation, moving related stuff under 'FEATURE*' namespace. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <david.ahern@oracle.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-iobj4f9gygcakrk2v5u61159@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
It has no use, so we can directly use the value for CFLAGS. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <david.ahern@oracle.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-ywyr5v962s32daq5hpgfkjap@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Following commit introduced features build dump: 443a7054 perf tools: Output feature detection's gcc output to a file Moving them into to have code more compact and renaming build dump files. For each feature 'test-X' new file 'test-X.make.output' is created and contains the build out. It's created in the same directory as the feature itself. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <david.ahern@oracle.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-dk6svnhcephrzgz4mfpcmtm7@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
Remove libbabeltrace check from default features set, because the requested version is not released yet in most distributions. We'll enable later. Calling libbabeltrace check manually via feature_check before $(feature-libbabeltrace) is used. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Acked-by: NIngo Molnar <mingo@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <david.ahern@oracle.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-5n7mr6ugcwdbxk0n1z8uukaa@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 12 3月, 2015 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
So that we can debug feature detection problems. It will appear on $(OUTPUT)feature-checks/.make-libbabeltrace.output, using the libbabeltrace feature test. Whole process: [acme@ssdandy linux]$ make -C tools/perf install-bin make: Entering directory `/home/acme/git/linux/tools/perf' BUILD: Doing 'make -j8' parallel build config/Makefile:425: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR config/Makefile:709: No libbabeltrace found, disables 'perf data' CTF format support, please install libbabeltrace-dev[el]/libbabeltrace-ctf-dev Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ OFF ] ... libdw-dwarf-unwind: [ on ] ... libbabeltrace: [ OFF ] <SNIP> [acme@ssdandy linux]$ find tools/perf -name ".make-*.output" | grep lib | tail -5 tools/perf/config/feature-checks/.make-libdw-dwarf-unwind.output tools/perf/config/feature-checks/.make-libbabeltrace.output tools/perf/config/feature-checks/.make-zlib.output tools/perf/config/feature-checks/.make-liberty.output tools/perf/config/feature-checks/.make-liberty-z.output [acme@ssdandy linux]$ [acme@ssdandy linux]$ cat tools/perf/config/feature-checks/.make-libbabeltrace.output make[1]: Entering directory `/home/acme/git/linux/tools/perf/config/feature-checks' gcc -MD -Wall -Werror -o test-libbabeltrace.bin test-libbabeltrace.c -Wl,-z,noexecstack -lbabeltrace-ctf # -lbabeltrace provided by test-libbabeltrace.c:2:42: fatal error: babeltrace/ctf-writer/writer.h: No such file or directory #include <babeltrace/ctf-writer/writer.h> ^ compilation terminated. make[1]: *** [test-libbabeltrace.bin] Error 1 make[1]: Leaving directory `/home/acme/git/linux/tools/perf/config/feature-checks' [acme@ssdandy linux]$ So the libbabeltrace feature will not be builtin, but if we do what is required for it to be built, namely point where we have it installed: [acme@ssdandy linux]$ time make -C tools/perf LIBBABELTRACE_DIR=/opt/libbabeltrace install-bin make: Entering directory `/home/acme/git/linux/tools/perf' BUILD: Doing 'make -j8' parallel build config/Makefile:425: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ OFF ] ... libdw-dwarf-unwind: [ on ] ... libbabeltrace: [ on ] ... zlib: [ on ] ... DWARF post unwind library: libdw <SNIP> [acme@ssdandy linux]$ find tools/perf -name ".make-libbabel*.output" | grep lib | tail -5 tools/perf/config/feature-checks/.make-libbabeltrace.output [acme@ssdandy linux]$ cat tools/perf/config/feature-checks/.make-libbabeltrace.output make[1]: Entering directory `/home/acme/git/linux/tools/perf/config/feature-checks' gcc -MD -I/opt/libbabeltrace/include -Wall -Werror -o test-libbabeltrace.bin test-libbabeltrace.c -Wl,-z,noexecstack -L/opt/libbabeltrace/lib -lbabeltrace-ctf # -lbabeltrace provided by make[1]: Leaving directory `/home/acme/git/linux/tools/perf/config/feature-checks' [acme@ssdandy linux]$ Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-h53xwueqwdeeiqcv9f50nqqb@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 02 3月, 2015 4 次提交
-
-
由 Ingo Molnar 提交于
On Debian-ish systems libbabeltrace-dev should be suggested as a package install as well. Signed-off-by: NIngo Molnar <mingo@kernel.org> Cc: David Ahern <david.ahern@oracle.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20150228091849.GA28959@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Ingo Molnar 提交于
Before: No bfd.h/libbfd found, install binutils-dev[el]/zlib-static to gain symbol demangling After: No bfd.h/libbfd found, please install binutils-dev[el]/zlib-static/libiberty-dev to gain symbol demangling Change the message to the standard 'please install' language and also add libiberty-dev suggestion for Ubuntu systems. Signed-off-by: NIngo Molnar <mingo@kernel.org> Cc: David Ahern <david.ahern@oracle.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20150228084610.GE31887@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Ingo Molnar 提交于
Before: Missing perl devel files. Disabling perl scripting support, consider installing perl-ExtUtils-Embed After: Missing perl devel files. Disabling perl scripting support, please install perl-ExtUtils-Embed/libperl-dev Change the message to the standard 'please install' language and adds Debian-ish package suggestion. Signed-off-by: NIngo Molnar <mingo@kernel.org> Cc: David Ahern <david.ahern@oracle.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20150228083909.GC31887@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Ingo Molnar 提交于
Change the Python detection message from: config/Makefile:566: No python-config tool was found config/Makefile:566: Python support will not be built config/Makefile:565: No 'python-config' tool was found: disables Python support - please install python-devel/python-dev It's now a standard one-line message with a package install suggestion, and it also uses the standard language used by other feature detection messages. Signed-off-by: NIngo Molnar <mingo@kernel.org> Cc: David Ahern <david.ahern@oracle.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20150228083345.GB31887@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 26 2月, 2015 1 次提交
-
-
由 Jiri Olsa 提交于
Adding 'perf data convert' to convert perf data file into different format. This patch adds support for CTF format conversion. To convert perf.data into CTF run: $ perf data convert --to-ctf=./ctf-data/ [ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ] [ perf data convert: Converted and wrote 11.268 MB (100230 samples) ] The command will create CTF metadata out of perf.data file (or one specified via -i option) and then convert all sample events into single CTF stream. Each sample_type bit is translated into separated CTF event field apart from following exceptions: PERF_SAMPLE_RAW - added in next patch PERF_SAMPLE_READ - TODO PERF_SAMPLE_CALLCHAIN - TODO PERF_SAMPLE_BRANCH_STACK - TODO PERF_SAMPLE_REGS_USER - TODO PERF_SAMPLE_STACK_USER - TODO $ perf --debug=data-convert=2 data convert ... The converted CTF data could be analyzed by CTF tools, like babletrace or tracecompass [1]. $ babeltrace ./ctf-data/ [03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 } [03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 } [03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 } [03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 } [03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 } [03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 } [03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 } The following members to the ctf-environment were decided to be added to distinguish and specify perf CTF data: - domain It says "kernel" because it contains a kernel trace (not to be confused with a user space like lttng-ust does) - tracer_name It says perf. This can be used to distinguish between lttng and perf CTF based trace. - version The kernel version from stream. In addition to release, this is what it looks like on a Debian kernel: release = "3.14-1-amd64"; version = "3.14.0"; [1] http://projects.eclipse.org/projects/tools.tracecompassSigned-off-by: NJiri Olsa <jolsa@kernel.org> Acked-by: NNamhyung Kim <namhyung@kernel.org> Reviewed-by: NDavid Ahern <dsahern@gmail.com> Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1424470628-5969-4-git-send-email-jolsa@kernel.orgSigned-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-