Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 29 4月, 2008 2 次提交
    • P
      [POWERPC] Add fast little-endian switch system call · 745a14cc
      由 Paul Mackerras 提交于 
      This adds a system call on 64-bit platforms for switching between
little-endian and big-endian modes that is much faster than doing a
prctl call.  This system call is handled as a special case right at
the start of the system call entry code, and because it is a special
case, it uses a system call number which is out of the range of
normal system calls, namely 0x1ebe.

Measurements with lmbench on a 4.2GHz POWER6 showed no measurable
change in the speed of normal system calls with this patch.

Switching endianness with this new system call takes around 60ns on a
4.2GHz POWER6, compared with around 300ns to switch endian mode with a
prctl.  This can provide a significant performance advantage for
emulators for little-endian architectures that want to switch between
big-endian and little-endian mode frequently, e.g. because they are
generating instructions sequences on the fly and they want to run
those sequences in little-endian mode.

The other thing about this system call is that it doesn't clobber as
many registers as a normal system call.  It only clobbers r12.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
      745a14cc
    • A
      celleb_scc_pciex __iomem annotations · 24caa6a0
      由 Al Viro 提交于 
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      24caa6a0
  3. 28 4月, 2008 4 次提交
    • Y
      powerpc: Add DIU platform code for MPC8610HPCD · 6f90a8bd
      由 York Sun 提交于 
      Add platform code to support Freescale DIU.  The platform code includes
framebuffer memory allocation, pixel format, monitor port, etc.
Signed-off-by: NYork Sun <yorksun@freescale.com>
Signed-off-by: NTimur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      6f90a8bd
    • Y
      fbdev: powerpc: driver for Freescale 8610 and 5121 DIU · 9b53a9e2
      由 York Sun 提交于 
      The following features are supported:
plane 0 works as a regular frame buffer, can be accessed by /dev/fb0
plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2
plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4
Special ioctls support AOIs

All /dev/fb* can be used as regular frame buffer devices, except hardware
change can only be made through /dev/fb0.  Changing pixel clock has no effect
on other fbs.

Limitation of usage of AOIs:
AOIs on the same plane can not be horizonally overlapped
AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1
AOIs can not beyond phisical display area. Application should check AOI geometry
before changing physical resolution on /dev/fb0

required command line parameters to preallocate memory for frame buffer diufb.

optional command line parameters to set modes and monitor
video=fslfb:[resolution][,bpp][,monitor]
Syntax:

Resolution
xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional
eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60

Bpp
bpp=32, bpp=24, or bpp=16

Monitor
monitor=0, monitor=1, monitor=2
0 is DVI
1 is Single link LVDS
2 is Double link LVDS

Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three
monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching
monirot port for MPC5121ADS has no effect.

If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above.
Signed-off-by: NYork Sun <yorksun@freescale.com>
Signed-off-by: NTimur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      9b53a9e2
    • J
      return pfn from direct_access, for XIP · 30afcb4b
      由 Jared Hulbert 提交于 
      Alter the block device ->direct_access() API to work with the new
get_xip_mem() API (that requires both kaddr and pfn are returned).

Some architectures will not do the right thing in their virt_to_page() for use
by XIP (to translate from the kernel virtual address returned by
direct_access(), to a user mappable pfn in XIP's page fault handler.

However, we can't switch it to just return the pfn and not the kaddr, because
we have no good way to get a kva from a pfn, and XIP requires the kva for its
read(2) and write(2) handlers.  So we have to return both.
Signed-off-by: NJared Hulbert <jaredeh@gmail.com>
Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux-mm@kvack.org
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      30afcb4b
    • J
      hotplug-memory: make online_page() common · 180c06ef
      由 Jeremy Fitzhardinge 提交于 
      All architectures use an effectively identical definition of online_page(), so
just make it common code.  x86-64, ia64, powerpc and sh are actually
identical; x86-32 is slightly different.

x86-32's differences arise because it puts its hotplug pages in the highmem
zone.  We can handle this in the generic code by inspecting the page to see if
its in highmem, and update the totalhigh_pages count appropriately.  This
leaves init_32.c:free_new_highpage with a single caller, so I folded it into
add_one_highpage_init.

I also removed an incorrect comment referring to the NUMA case; any NUMA
details have already been dealt with by the time online_page() is called.

[akpm@linux-foundation.org: fix indenting]
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: NDave Hansen <dave@linux.vnet.ibm.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamez.hiroyu@jp.fujitsu.com>
Tested-by: NKAMEZAWA Hiroyuki <kamez.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Christoph Lameter <clameter@sgi.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      180c06ef
  5. 27 4月, 2008 1 次提交
  7. 25 4月, 2008 5 次提交
  9. 24 4月, 2008 28 次提交