[POWERPC] celleb: Move the SCC related code for celleb

This moves the SCC (Super Companion Chip) related code for celleb
into platforms/cell/.
All files in this patch are used by celleb-beat and celleb-native
commonly.
Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

arch/powerpc/platforms/cell/Makefile

@@ -32,6 +32,9 @@ obj-$(CONFIG_PCI_MSI)			+= axon_msi.o
 # celleb stuff
 ifeq ($(CONFIG_PPC_CELLEB),y)
 obj-y					+= celleb_setup.o \
-					   celleb_pci.o \
+					   celleb_pci.o celleb_scc_epci.o \
+					   celleb_scc_uhc.o \
 					   io-workarounds.o spider-pci.o
+
+obj-$(CONFIG_SERIAL_TXX9)		+= celleb_scc_sio.o
 endif

arch/powerpc/platforms/celleb/scc_epci.c → arch/powerpc/platforms/cell/celleb_scc_epci.c

@@ -30,13 +30,11 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/prom.h>
-#include <asm/machdep.h>
 #include <asm/pci-bridge.h>
 #include <asm/ppc-pci.h>
 
-#include "scc.h"
-#include "../cell/celleb_pci.h"
-#include "interrupt.h"
+#include "celleb_scc.h"
+#include "celleb_pci.h"
 
 #define MAX_PCI_DEVICES   32
 #define MAX_PCI_FUNCTIONS  8
@@ -111,10 +109,8 @@ static int celleb_epci_check_abort(struct pci_controller *hose,
 	return PCIBIOS_SUCCESSFUL;
 }
 
-static PCI_IO_ADDR celleb_epci_make_config_addr(
-					struct pci_bus *bus,
-					struct pci_controller *hose,
-					unsigned int devfn, int where)
+static PCI_IO_ADDR celleb_epci_make_config_addr(struct pci_bus *bus,
+		struct pci_controller *hose, unsigned int devfn, int where)
 {
 	PCI_IO_ADDR addr;
 
@@ -410,8 +406,7 @@ static int __init celleb_setup_epci(struct device_node *node,
 	if (!hose->cfg_addr)
 		goto error;
 	pr_debug("EPCI: cfg_addr map 0x%016lx->0x%016lx + 0x%016lx\n",
-		 r.start, (unsigned long)hose->cfg_addr,
-		(r.end - r.start + 1));
+		 r.start, (unsigned long)hose->cfg_addr, (r.end - r.start + 1));
 
 	if (of_address_to_resource(node, 2, &r))
 		goto error;
@@ -419,8 +414,7 @@ static int __init celleb_setup_epci(struct device_node *node,
 	if (!hose->cfg_data)
 		goto error;
 	pr_debug("EPCI: cfg_data map 0x%016lx->0x%016lx + 0x%016lx\n",
-		 r.start, (unsigned long)hose->cfg_data,
-		(r.end - r.start + 1));
+		 r.start, (unsigned long)hose->cfg_data, (r.end - r.start + 1));
 
 	hose->ops = &celleb_epci_ops;
 	celleb_epci_init(hose);

arch/powerpc/platforms/celleb/scc_uhc.c → arch/powerpc/platforms/cell/celleb_scc_uhc.c

@@ -25,7 +25,7 @@
 #include <asm/io.h>
 #include <asm/machdep.h>
 
-#include "scc.h"
+#include "celleb_scc.h"
 
 #define UHC_RESET_WAIT_MAX 10000
 

arch/powerpc/platforms/celleb/Makefile

 obj-y				+= interrupt.o iommu.o \
-				   htab.o beat.o hvCall.o \
-				   scc_epci.o scc_uhc.o
+				   htab.o beat.o hvCall.o
 
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_PPC_UDBG_BEAT)	+= udbg_beat.o
-obj-$(CONFIG_SERIAL_TXX9)	+= scc_sio.o
 obj-$(CONFIG_SPU_BASE)		+= spu_priv1.o