- 17 7月, 2010 2 次提交
-
-
由 Robert Jennings 提交于
The order of freeing the IRQ and freeing the device in firmware in ibmveth_close can cause the adapter to become unusable after a subsequent ibmveth_open. Only a reboot of the OS will make the network device usable again. This is seen when cycling the adapter up and down while there is network activity. There is a window where an IRQ will be left unserviced (H_EOI will not be called). The solution is to make a VIO_IRQ_DISABLE h_call, free the device with firmware, and then call free_irq. Signed-off-by: NRobert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Boyd 提交于
The rt2x00dev->intf_work workqueue is never initialized when a driver is probed for a non-existent device (in this case rt2500usb). On such a path we call rt2x00lib_remove_dev() to free any resources initialized during the probe before we use INIT_WORK to initialize the workqueue. This causes lockdep to get confused since the lock used in the workqueue hasn't been initialized yet but is now being acquired during cancel_work_sync() called by rt2x00lib_remove_dev(). Fix this by initializing the workqueue first before we attempt to probe the device. This should make lockdep happy and avoid breaking any assumptions about how the library cleans up after a probe fails. phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Pid: 2027, comm: modprobe Not tainted 2.6.35-rc5+ #60 Call Trace: [<ffffffff8105fe59>] register_lock_class+0x152/0x31f [<ffffffff81344a00>] ? usb_control_msg+0xd5/0x111 [<ffffffff81061bde>] __lock_acquire+0xce/0xcf4 [<ffffffff8105f6fd>] ? trace_hardirqs_off+0xd/0xf [<ffffffff81492aef>] ? _raw_spin_unlock_irqrestore+0x33/0x41 [<ffffffff810628d5>] lock_acquire+0xd1/0xf7 [<ffffffff8104f037>] ? __cancel_work_timer+0x99/0x17e [<ffffffff8104f06e>] __cancel_work_timer+0xd0/0x17e [<ffffffff8104f037>] ? __cancel_work_timer+0x99/0x17e [<ffffffff8104f136>] cancel_work_sync+0xb/0xd [<ffffffffa0096675>] rt2x00lib_remove_dev+0x25/0xb0 [rt2x00lib] [<ffffffffa0096bf7>] rt2x00lib_probe_dev+0x380/0x3ed [rt2x00lib] [<ffffffff811d78a7>] ? __raw_spin_lock_init+0x31/0x52 [<ffffffffa00bbd2c>] ? T.676+0xe/0x10 [rt2x00usb] [<ffffffffa00bbe4f>] rt2x00usb_probe+0x121/0x15e [rt2x00usb] [<ffffffff813468bd>] usb_probe_interface+0x151/0x19e [<ffffffff812ea08e>] driver_probe_device+0xa7/0x136 [<ffffffff812ea167>] __driver_attach+0x4a/0x66 [<ffffffff812ea11d>] ? __driver_attach+0x0/0x66 [<ffffffff812e96ca>] bus_for_each_dev+0x54/0x89 [<ffffffff812e9efd>] driver_attach+0x19/0x1b [<ffffffff812e9b64>] bus_add_driver+0xb4/0x204 [<ffffffff812ea41b>] driver_register+0x98/0x109 [<ffffffff813465dd>] usb_register_driver+0xb2/0x173 [<ffffffffa00ca000>] ? rt2500usb_init+0x0/0x20 [rt2500usb] [<ffffffffa00ca01e>] rt2500usb_init+0x1e/0x20 [rt2500usb] [<ffffffff81000203>] do_one_initcall+0x6d/0x17a [<ffffffff8106cae8>] sys_init_module+0x9c/0x1e0 [<ffffffff8100296b>] system_call_fastpath+0x16/0x1b Signed-off-by: NStephen Boyd <bebarino@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 15 7月, 2010 1 次提交
-
-
由 John W. Linville 提交于
"hostap: Protect against initialization interrupt" (which reinstated "wireless: hostap, fix oops due to early probing interrupt") reintroduced Bug 16111. This is because hostap_pci wasn't setting dev->base_addr, which is now checked in prism2_interrupt. As a result, initialization was failing for PCI-based hostap devices. This corrects that oversight. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 13 7月, 2010 1 次提交
-
-
由 Ken Kawasaki 提交于
Use spin_lock_irqsave instead of spin_lock in ax_interrupt because the interrupt handler can also be invoked from ei_watchdog. Signed-off-by: NKen Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 7月, 2010 1 次提交
-
-
由 Francois Romieu 提交于
Merge error. See CFG_METHOD_8 (0x3c800000 + 0x00300000) since version 8.002.00 of Realtek's driver. Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Cc: Hayes <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 7月, 2010 4 次提交
-
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org> drivers/net/sb1250-mac.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wu Fengguang 提交于
The original KERN_CRIT will mess up terminals. CC: Sreenivasa Honnur <Sreenivasa.Honnur@neterion.com> Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis Kirjanov 提交于
Fix missing iounmaps. Signed-off-by: NDenis Kirjanov <dkirjanov@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajkumar Manoharan 提交于
Failure cases within ath9k_hif_usb_alloc_urbs are failed to release allocated memory. Signed-off-by: NRajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 06 7月, 2010 1 次提交
-
-
由 Kulikov Vasiliy 提交于
net_device allocated with alloc_eip_netdev() must be freed. Signed-off-by: NKulikov Vasiliy <segooon@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 7月, 2010 9 次提交
-
-
由 Rusty Russell 提交于
virtio net will never try to overflow the TX ring, so the only reason add_buf may fail is out of memory. Thus, we can not stop the device until some request completes - there's no guarantee anything at all is outstanding. Make the error message clearer as well: error here does not indicate queue full. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (...and avoid TX_BUSY) Cc: stable@kernel.org # .34.x (s/virtqueue_/vi->svq->vq_ops->/) Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael S. Tsirkin 提交于
We currently fill all of RX ring, then add_buf returns ENOSPC, which gets mis-detected as an out of memory condition and causes us to reschedule the work, and so on forever. Fix this by oom = err == -ENOMEM; Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org # .34.x Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Mason 提交于
This patch resolves a number of issues in the statistics gathering of the s2io driver. On Xframe adapters, the received multicast statistics counter includes pause frames which are not indicated to the driver. This can cause issues where the multicast packet count is higher than what has actually been received, possibly higher than the number of packets received. The driver software counters are replaced with the adapter hardware statistics for rx_packets, rx_bytes, and tx_bytes. It also uses the overflow registers to determine if the statistics wrapped the 32bit register (removing the window of having a statistic value less than the previous call). rx_length_errors statistic now includes undersized packets in addition to oversized packets in its counting. Finally, rx_crc_errors are now being counted. Signed-off-by: NJon Mason <jon.mason@exar.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Fastabend 提交于
Reducing real_num_queues needs to flush the qdisc otherwise skbs with queue_mappings greater then real_num_tx_queues can be sent to the underlying driver. The flow for this is, dev_queue_xmit() dev_pick_tx() skb_tx_hash() => hash using real_num_tx_queues skb_set_queue_mapping() ... qdisc_enqueue_root() => enqueue skb on txq from hash ... dev->real_num_tx_queues -= n ... sch_direct_xmit() dev_hard_start_xmit() ndo_start_xmit(skb,dev) => skb queue set with old hash skbs are enqueued on the qdisc with skb->queue_mapping set 0 < queue_mappings < real_num_tx_queues. When the driver decreases real_num_tx_queues skb's may be dequeued from the qdisc with a queue_mapping greater then real_num_tx_queues. This fixes a case in ixgbe where this was occurring with DCB and FCoE. Because the driver is using queue_mapping to map skbs to tx descriptor rings we can potentially map skbs to rings that no longer exist. Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com> Tested-by: NRoss Brattain <ross.b.brattain@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Breno Leitao 提交于
On some ocasions the function qlge_io_resume() tries to add a pending timer, which causes the system to hit the BUG() on add_timer() function. This patch removes the timer during the EEH recovery. Signed-off-by: NBreno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Breno Leitao 提交于
Currently qlge driver calls add_timer() instead of mod_timer(). This patch changes add_timer() to mod_timer(), which seems a better solution. Signed-off-by: NBreno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
netdev_printk() follows the net_device's parent device pointer, so we must set that earlier than we previously did. Reported-by: NLuís Picciochi Oliveira <pitxyoki@gmail.com> Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
This reverts commit c17b274d. That change was reported to break rndis_wlan support for the WUSB54GS. Reported-by: NLuís Picciochi Oliveira <pitxyoki@gmail.com> Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Reinette Chatre 提交于
When there is a firmware error or the firmware is reloaded for some other reason we currently clear all station information, including keys associated with them. A problem is that we do not clear some other information regarding keys that are not stored in the station structs. The consequence of this is that when the device is reconfigured after the firmware reload we can, among other things, run out of key indices. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=16232 http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2221Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Reviewed-by: NJohannes Berg <johannes.berg@intel.com>
-
- 01 7月, 2010 2 次提交
-
-
由 Flavio Leitner 提交于
When two systems using bonding devices in adaptive load balancing (ALB) communicates with each other, an endless ping-pong of ARP replies starts between these two systems. What happens? In the ALB mode, bonding driver keeps track of each client connected in a hash table, so it can do the receive load balancing (RLB). This hash table is updated when an ARP reply is received, then it scans for the client entry, updates its MAC address and flag it to be announced later. Therefore, two seconds later, the alb monitor runs and send for each updated client entry two ARP replies updating this specific client. The same process happens on the receiving system, causing the endless ping-pong of arp replies. See more information including the relevant functions below: System 1 System 2 bond0 bond0 ping <system2> ARP request ---------> <--------- ARP reply +->rlb_arp_recv <---------------------+ <--- loop begins | rlb_update_entry_from_arp | | client_info->ntt = 1; | | bond_info->rx_ntt = 1; | | | | <communication succeed> | | | | bond_alb_monitor | | rlb_update_rx_clients | | rlb_update_client | | arp_create(ARPOP_REPLY) | | send ARP reply --------------> V | send ARP reply --------------> | rlb_arp_recv | rlb_update_entry_from_arp | client_info->ntt = 1; | bond_info->rx_ntt = 1; | < snipped, same as in system 1> +------- <-------------- send ARP reply <-------------- send ARP reply Besides the unneeded networking traffic, this loop breaks a cluster because a backup system can't take over the IP address. There is always one system sending an ARP reply poisoning the network. This patch fixes the problem adding a check for the MAC address before updating it. Thus, if the MAC address didn't change, there is no need to update neither to announce it later. Signed-off-by: NFlavio Leitner <fleitner@redhat.com> Signed-off-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Bishara 提交于
Some controllers (KW, Dove) limits the TX IP/layer4 checksum offloading to a max size. Signed-off-by: NSaeed Bishara <saeed@marvell.com> Acked-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 6月, 2010 3 次提交
-
-
由 Guillaume Gaudonville 提交于
In driver ixgbe, ixgbe_atr may cause crashes for non-ipv4 packets. Just add a test to check skb->protocol. It may crash on short packets due to ip_hdr() access. Signed-off-by: NGuillaume Gaudonville <guillaume.gaudonville@6wind.com> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Fastabend 提交于
Disabling the tx laser while receiving DMA requests can hang the device. After this occurs the device is in a bad state. The GPIO bit never clears when PCI master access is disabled and a reboot is required to get the device in a good state again. Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy Gospodarek 提交于
This patch added to 2.6.34: commit 5f6c0181 Author: Jesse Brandeburg <jesse.brandeburg@intel.com> Date: Wed Apr 14 16:04:23 2010 -0700 ixgbe: fix bug with vlan strip in promsic mode among other things added a function called ixgbe_vlan_filter_enable. This new function wants to access and set some rx_ring parameters, but adapter->rx_ring has already been freed. This simply moves the free until after the access and makes __ixgbe_shutdown look more like ixgbe_remove. Signed-off-by: NAndy Gospodarek <andy@greyhouse.net> Acked-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NEmil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 6月, 2010 1 次提交
-
-
由 Andy Gospodarek 提交于
Support for netpoll over bonded interfaces was added here: commit f6dc31a8 Author: WANG Cong <amwang@redhat.com> Date: Thu May 6 00:48:51 2010 -0700 bonding: make bonding support netpoll but it is bad enough that we should probably just disable netpoll over bonding until some of the locking logic in the bonding driver is changed or converted completely to RCU. Simple actions like changing the active slave in active-backup mode will hang the box if a high enough printk debugging level is enabled. Keeping the old code around will be good for anyone that wants to work on it (and for after the RCU conversion), so I propose this small patch rather than ripping it all out. Signed-off-by: NAndy Gospodarek <andy@greyhouse.net> Signed-off-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 6月, 2010 2 次提交
-
-
由 David Woodhouse 提交于
Commit e13647c1 (phylib: Add support for the LXT973 phy.) added a new ID but neglected to also add it to the MODULE_DEVICE_TABLE. Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Schmidt 提交于
When pci_enable_msix() returned ret<0, entries and vxge_entries were leaked. While at it, use the centralized exit idiom in the function. Signed-off-by: NMichal Schmidt <mschmidt@redhat.com> Acked-by: NRam Vepa <ram.vepa@exar.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 6月, 2010 4 次提交
-
-
由 Florian Fainelli 提交于
If the call to phy_connect fails, we will return directly instead of freeing the previously allocated struct net_device. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> CC: stable@kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ken Kawasaki 提交于
smc91c92_cs: Fix the problem that lan & modem does not work simultaneously in the Megahertz multi-function card. We need to write MEGAHERTZ_ISR to retrigger interrupt. Signed-off-by: NKen Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wey-Yi Guy 提交于
When building tx command, always set TX_CMD_FLAG_PROT_REQUIRE_MSK for 5000 series and up. Without setting this bit the firmware will not examine the RTS/CTS setting and thus not send traffic with the appropriate protection. RTS/CTS is is required for HT traffic in a noisy environment where, without this setting, connections will stall on some hardware as documented in the patch that initially attempted to address this: commit 1152dcc2 Author: Wey-Yi Guy <wey-yi.w.guy@intel.com> Date: Fri Jan 15 13:42:58 2010 -0800 iwlwifi: Fix throughput stall issue in HT mode for 5000 Similar to 6000 and 1000 series, RTS/CTS is the recommended protection mechanism for 5000 series in HT mode based on the HW design. Using RTS/CTS will better protect the inner exchange from interference, especially in highly-congested environment, it also prevent uCode encounter TX FIFO underrun and other HT mode related performance issues. For 3945 and 4965, different flags are used for RTS/CTS or CTS-to-Self protection. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
由 Johannes Berg 提交于
commit 3474ad63 Author: Johannes Berg <johannes.berg@intel.com> Date: Thu Apr 29 04:43:05 2010 -0700 iwlwifi: apply filter flags directly broke multicast. The reason, it turns out, is that the code previously checked if ALLMULTI _changed_, which the new code no longer did, and normally it _never_ changes. Had somebody changed it manually, the code prior to my patch there would have been broken already. The reason is that we always, unconditionally, ask the device to pass up all multicast frames, but the new code made it depend on ALLMULTI which broke it since now we'd pass up multicast frames depending on the default filter in the device, which isn't necessarily what we want (since we don't program it right now). Fix this by simply not checking allmulti as we have allmulti behaviour enabled already anyway. Reported-by: NMaxim Levitsky <maximlevitsky@gmail.com> Tested-by: NMaxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 24 6月, 2010 4 次提交
-
-
由 Brandon Philips 提交于
sky2_phy_reinit is called by the ethtool helpers sky2_set_settings, sky2_nway_reset and sky2_set_pauseparam when netif_running. However, at the end of sky2_phy_init GM_GP_CTRL has GM_GPCR_RX_ENA and GM_GPCR_TX_ENA cleared. So, doing these commands causes the device to stop working: $ ethtool -r eth0 $ ethtool -A eth0 autoneg off Fix this issue by enabling Rx/Tx after running sky2_phy_init in sky2_phy_reinit. Signed-off-by: NBrandon Philips <bphilips@suse.de> Tested-by: NBrandon Philips <bphilips@suse.de> Cc: stable@kernel.org Tested-by: NMike McCormack <mikem@ring3k.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
There are few places where ANI is started without checking if it is right to start. This might lead to a case where ani timer would be left undeleted and cause improper memory acccess during module unload. This bug is clearly exposed with paprd support where the driver detects tx hang and does a chip reset. During this reset ani is (re)started without checking if it needs to be started. This would leave a timer scheduled even after all the resources are freed and cause a panic. This patch introduces a bit in sc_flags to indicate if ani needs to be started in sw_scan_start() and ath_reset(). This would fix the following panic. This issue is easily seen with ar9003 + paprd. BUG: unable to handle kernel paging request at 0000000000003f38 [<ffffffff81075391>] ? __queue_work+0x41/0x50 [<ffffffff8106afaa>] run_timer_softirq+0x17a/0x370 [<ffffffff81088be8>] ? tick_dev_program_event+0x48/0x110 [<ffffffff81061f69>] __do_softirq+0xb9/0x1f0 [<ffffffff810ba060>] ? handle_IRQ_event+0x50/0x160 [<ffffffff8100af5c>] call_softirq+0x1c/0x30 [<ffffffff8100c9f5>] do_softirq+0x65/0xa0 [<ffffffff81061e25>] irq_exit+0x85/0x90 [<ffffffff8155e095>] do_IRQ+0x75/0xf0 [<ffffffff815570d3>] ret_from_intr+0x0/0x11 <EOI> [<ffffffff812fd67b>] ? acpi_idle_enter_simple+0xe4/0x119 [<ffffffff812fd674>] ? acpi_idle_enter_simple+0xdd/0x119 [<ffffffff81441c87>] cpuidle_idle_call+0xa7/0x140 [<ffffffff81008da3>] cpu_idle+0xb3/0x110 [<ffffffff81550722>] start_secondary+0x1ee/0x1f5 Signed-off-by: NVasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dmitry Kravkov 提交于
Disable statistics initialization for eth clients that do not support statistics. This prevents memory corruption on bnx2x hw. Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
-
由 Anirban Chakraborty 提交于
netxen_nic and qlcnic driver depends on firmware_class module. Signed-off-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 6月, 2010 1 次提交
-
-
由 Filip Aben 提交于
This patch removes the setting of the low_latency flag. tty_flip_buffer_push() is occasionally being called in irq context, which causes a hang if the low_latency flag is set. Removing the low_latency flag only seems to impact the flush to ldisc, which will now be put on a workqueue. Signed-off-by: NFilip Aben <f.aben@option.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 6月, 2010 2 次提交
-
-
由 Helge Deller 提交于
Fix commit 4cd24eaf (net: use netdev_mc_count and netdev_mc_empty when appropriate) Signed-off-by: NHelge Deller <deller@gmx.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ralf Baechle 提交于
$ make CONFIG_DEBUG_SECTION_MISMATCH=y [...] WARNING: drivers/net/built-in.o(.data+0x0): Section mismatch in reference from the variable mipsnet_driver to the function .init.text:mipsnet_probe() The variable mipsnet_driver references the function __init mipsnet_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, [...] Fixed by making mipsnet_probe __devinit. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> drivers/net/mipsnet.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 6月, 2010 1 次提交
-
-
由 Bob Copeland 提交于
ath5k assumes ah_current_channel is always a valid pointer in several places, but a newly created interface may not have a channel. To avoid null pointer dereferences, set it up to point to the first available channel until later reconfigured. This fixes the following oops: $ rmmod ath5k $ insmod ath5k $ iw phy0 set distance 11000 BUG: unable to handle kernel NULL pointer dereference at 00000006 IP: [<d0a1ff24>] ath5k_hw_set_coverage_class+0x74/0x1b0 [ath5k] *pde = 00000000 Oops: 0000 [#1] last sysfs file: /sys/devices/pci0000:00/0000:00:0e.0/ieee80211/phy0/index Modules linked in: usbhid option usb_storage usbserial usblp evdev lm90 scx200_acb i2c_algo_bit i2c_dev i2c_core via_rhine ohci_hcd ne2k_pci 8390 leds_alix2 xt_IMQ imq nf_nat_tftp nf_conntrack_tftp nf_nat_irc nf_cc Pid: 1597, comm: iw Not tainted (2.6.32.14 #8) EIP: 0060:[<d0a1ff24>] EFLAGS: 00010296 CPU: 0 EIP is at ath5k_hw_set_coverage_class+0x74/0x1b0 [ath5k] EAX: 000000c2 EBX: 00000000 ECX: ffffffff EDX: c12d2080 ESI: 00000019 EDI: cf8c0000 EBP: d0a30edc ESP: cfa09bf4 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 Process iw (pid: 1597, ti=cfa09000 task=cf88a000 task.ti=cfa09000) Stack: d0a34f35 d0a353f8 d0a30edc 000000fe cf8c0000 00000000 1900063d cfa8c9e0 <0> cfa8c9e8 cfa8c0c0 cfa8c000 d0a27f0c 199d84b4 cfa8c200 00000010 d09bfdc7 <0> 00000000 00000000 ffffffff d08e0d28 cf9263c0 00000001 cfa09cc4 00000000 Call Trace: [<d0a27f0c>] ? ath5k_hw_attach+0xc8c/0x3c10 [ath5k] [<d09bfdc7>] ? __ieee80211_request_smps+0x1347/0x1580 [mac80211] [<d08e0d28>] ? nl80211_send_scan_start+0x7b8/0x4520 [cfg80211] [<c10f5db9>] ? nla_parse+0x59/0xc0 [<c11ca8d9>] ? genl_rcv_msg+0x169/0x1a0 [<c11ca770>] ? genl_rcv_msg+0x0/0x1a0 [<c11c7e68>] ? netlink_rcv_skb+0x38/0x90 [<c11c9649>] ? genl_rcv+0x19/0x30 [<c11c7c03>] ? netlink_unicast+0x1b3/0x220 [<c11c893e>] ? netlink_sendmsg+0x26e/0x290 [<c11a409e>] ? sock_sendmsg+0xbe/0xf0 [<c1032780>] ? autoremove_wake_function+0x0/0x50 [<c104d846>] ? __alloc_pages_nodemask+0x106/0x530 [<c1074933>] ? do_lookup+0x53/0x1b0 [<c10766f9>] ? __link_path_walk+0x9b9/0x9e0 [<c11acab0>] ? verify_iovec+0x50/0x90 [<c11a42b1>] ? sys_sendmsg+0x1e1/0x270 [<c1048e50>] ? find_get_page+0x10/0x50 [<c104a96f>] ? filemap_fault+0x5f/0x370 [<c1059159>] ? __do_fault+0x319/0x370 [<c11a55b4>] ? sys_socketcall+0x244/0x290 [<c101962c>] ? do_page_fault+0x1ec/0x270 [<c1019440>] ? do_page_fault+0x0/0x270 [<c1002ae5>] ? syscall_call+0x7/0xb Code: 00 b8 fe 00 00 00 b9 f8 53 a3 d0 89 5c 24 14 89 7c 24 10 89 44 24 0c 89 6c 24 08 89 4c 24 04 c7 04 24 35 4f a3 d0 e8 7c 30 60 f0 <0f> b7 43 06 ba 06 00 00 00 a8 10 75 0e 83 e0 20 83 f8 01 19 d2 EIP: [<d0a1ff24>] ath5k_hw_set_coverage_class+0x74/0x1b0 [ath5k] SS:ESP 0068:cfa09bf4 CR2: 0000000000000006 ---[ end trace 54f73d6b10ceb87b ]--- Cc: stable@kernel.org Reported-by: NSteve Brown <sbrown@cortland.com> Signed-off-by: NBob Copeland <me@bobcopeland.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 17 6月, 2010 1 次提交
-
-
由 FUJITA Tomonori 提交于
This removes dma_get_ops() prefetch optimization in bnx2. bnx2 uses dma_get_ops() to see if dma_sync_single_for_cpu() is noop. bnx2 does prefetch if it's noop. But dma_get_ops() isn't available on all the architectures (only the architectures that uses dma_map_ops struct have it). Using dma_get_ops() in drivers leads to compilation breakage on many architectures. This patch removes dma_get_ops() and changes bnx2 to do prefetch on all the architectures. This adds useless prefetch on non-coherent architectures but this is harmless. It is also unlikely to cause the performance drop. [ Remove now unused local variable 'pdev' -DaveM ] Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-