- 02 8月, 2010 15 次提交
-
-
由 Dan Carpenter 提交于
The "error" variable is unsigned so it's never less than zero. I changed it to check if (freq < current_freq) directly. "best_error" is also unsigned so "best_error - 100" could be a large number instead of a negative. Since "error" is unsigned it is never less than a negative and so the cases where "best_error" is less than or equal to 100 are false. Signed-off-by: NDan Carpenter <error27@gmail.com> Reviewed-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
On systems using kexec, the new kernel is booted straight from the old kernel, without any warning to the graphics driver. So the GPU is basically left as-is in a running state, however the CPU side is completly reset. Without stating the saneness of anyone using kexec on live systems, we should at least try not to crash the GPU. This patch resets 3 registers to 0 that could cause bad things to happen to the running system. This allows kexec to work on a Power6/RN50 system. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Michel Dänzer 提交于
This fixes a problem where on low VRAM cards we'd run out of space for validation. [airlied: Tested on my M7, Thinkpad T42, compiz works with no problems.] Signed-off-by: NMichel Dänzer <daenzer@vmware.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
This is required for the NB_MISC regs on rs780/rs880 which means HDMI/DVI/DP ports using PCIEPHY won't work without it. It might also help with s/r (asic init) issues on other atombios cards. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=28774 and similar issues reported by Alberto Milone. [airlied: Squash io fix patch] Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Tested-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Rafał Miłecki 提交于
We will need method of selecting encoder that should receive HDMI block. For now we assign HDMI block to first enabled encoder. Hopefully there are not many RS6x0 chips with two digital encoders. [airlied: add RS740 checks as per Alex suggestion.] Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Rafał Miłecki 提交于
This is needed to enable audio support on devices using polling. In case user decides to disable audio (module parameter) we still will try to use timer in r600_audio_enable_polling. This would lead to BUG in kernel/timer.c. Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Userspace needs this information to access tiled buffers via the CPU. v2: rebased on evergreen accel changes Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Covers depth, cb, and textures. Hopefully I got this right. v2: - fix bugs: https://bugs.freedesktop.org/show_bug.cgi?id=28327 https://bugs.freedesktop.org/show_bug.cgi?id=28381 - use ALIGNED(), IS_ALIGNED() macros Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Check for relocs for DB_DEPTH_INFO, CB_COLOR*_INFO, and texture resources. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Needed for scanning out of a tiled buffer. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Needed for scanning out of a tiled buffer. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
rv6xx/rv7xx/evergreen families supported; older asics did not have an internal thermal sensor. Note, not all oems use the internal thermal sensor, so it's only exposed in cases where it is used. Note also, that most laptops use an oem specific ACPI solution for GPU thermal information rather than using the internal thermal sensor directly. v2: export millidegrees celsius, use hwmon device properly. v3: fix Kconfig Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alberto Milone 提交于
By calling the ATIF method in the radeon driver we can make sure that hotkeys such as the video switch key emit ACPI events when pressed. agd5f: fix warning Signed-off-by: NAlberto Milone <alberto.milone@canonical.com> Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Some tables have delays that can cause the timeout to hit even when not intended. Should fix: https://bugs.freedesktop.org/show_bug.cgi?id=27744 and related bugs. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
- Make the logic in r100_pll_errata_after_index() match the other errata functions - Use rdev->family rather than rdev->flags & RADEON_FAMILY_MASK for kms - replace rn50 check using ids with ASIC_IS_RN50 convenience macro Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 22 7月, 2010 8 次提交
-
-
由 Alex Deucher 提交于
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=29062Reported-by: NAndres Cimmarusti <acimmarusti@gmail.com> Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dmitry Torokhov 提交于
Older firmwares fixed the middle byte of the Synaptics capabilities query to 0x47, but starting with firmware 7.5 the middle byte represents submodel ID, sometimes also called "dash number". Reported-and-tested-by: NMiroslav Šulc <fordfrog@gmail.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Jason Wessel 提交于
The kdb code should not toggle the sysrq state in case an end user wants to try and resume the normal kernel execution. Signed-off-by: NJason Wessel <jason.wessel@windriver.com> Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Alex Deucher 提交于
Return the crtc_id, not the counter value. They are not necessarily the same. Cc: Jerome Glisse <glisse@freedesktop.org> Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Luck, Tony 提交于
The commit 1e8655f8 drm/ttm: Fix build on architectures without AGP looks at TTM_HAS_AGP before it has been set in ttm_bo_driver.h Move the conditional inclusion of <asm/agp.h> *after* we have included ttm_bo_driver.h Signed-of-by: NTony Luck <tony.luck@intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Add delay after turning off the LVDS encoder. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=16389Tested-by: NJan Kreuzer <kontrollator@gmx.de> Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
We only add/remove crtcs at driver load, you cannot remove when the GPU is running a CS packet since the fd is open, when GPU hotplugging on radeons actually is needed all this locking needs a review and I've started re-working kms core locking to deal with this better. But for now avoid long delays in CS processing when hotplug detect is happening in a different thread. this fixes a regression introduced with hotplug detection. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Linus Torvalds 提交于
Pointed out by Lucas who found the new one in a comment in setup_percpu.c. And then I fixed the others that I grepped for. Reported-by: NLucas <canolucas@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 21 7月, 2010 17 次提交
-
-
由 Patrick McHardy 提交于
Up to 2.6.34 pcmcia_release_irq() reset p_dev->_irq to 0 after releasing the irq. The IRQ is now released in pcmcia_disable_device(), however p_dev->_irq is not reset, triggering a warning in pcmcia_device_remove(). Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dave Chinner 提交于
Add the shrinkers missed in the first conversion of the API in commit 7f8275d0 ("mm: add context argument to shrinker callback"). Signed-off-by: NDave Chinner <dchinner@redhat.com>
-
由 Dmitry Torokhov 提交于
The Nokia RX51 board code (arch/arm/mach-omap2/board-rx51-peripherals.c) defines a key map for the matrix keypad keyboard. The hardware seems to use all of the 8 rows and 8 columns of the keypad, although not all possible locations are used. The TWL4030 supports keypads with at most 8 rows and 8 columns. Most keys are defined with a row and column number between 0 and 7, except KEY(0xff, 2, KEY_F9), KEY(0xff, 4, KEY_F10), KEY(0xff, 5, KEY_F11), which represent keycodes that should be emitted when entire row is connected to the ground. since the driver handles this case as if we had an extra column in the key matrix. Unfortunately we do not allocate enough space and end up owerwriting some random memory. Reported-and-tested-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@kernel.org Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Otherwise we won't see any events from the gamepad. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16408Reported-and-tested-by: NEugene Yudin <eugene.yudin@gmail.com> Cc: stable@kernel.org Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
We moved input devices from 'struct gc' to individial pads (struct gc-pad), but gc_nes_process_packet() was still trying to use old ones and crashing. Cc: stable@kernel.org Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Alex Deucher 提交于
Disables the crts as per dpms and also disables the ppll associated with the crtc. This should save additional power. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Chris Wilson 提交于
It looks like there is a race condition between unbinding a framebuffer on a hotplug event and user space trying to flip: BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 IP: [<ffffffffa008c7d3>] intel_crtc_page_flip+0xc9/0x39c [i915] PGD 114724067 PUD 1145bd067 PMD 0 Oops: 0000 [#1] SMP Pid: 10954, comm: X Not tainted 2.6.35-rc5_stable_20100714+ #1 P5Q-EM/P5Q-EM RIP: 0010:[<ffffffffa008c7d3>] [<ffffffffa008c7d3>] intel_crtc_page_flip+0xc9/0x39c [i915] RSP: 0018:ffff880114927cc8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff88012df48320 RCX: ffff88010c945600 RDX: ffff880001a109c8 RSI: ffff88010c945840 RDI: ffff88012df48320 RBP: ffff880114927d18 R08: ffff88012df48280 R09: ffff88012df48320 R10: 0000000003c2e0b0 R11: 0000000000003246 R12: ffff88010c945840 R13: ffff88012df48000 R14: 0000000000000060 R15: ffff88012dbb8000 FS: 00007f9e6078e830(0000) GS:ffff880001a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000058 CR3: 00000001177a8000 CR4: 00000000000406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process X (pid: 10954, threadinfo ffff880114926000, task ffff88012a4a1690) Stack: ffff88010c945600 ffff880115b176c0 ffff88012db10000 0000000000000246 <0> fffffff40006101c ffff88010c945600 00000000ffffffea ffff88010c945600 <0> ffff88012df48320 ffff88011b4b6780 ffff880114927d78 ffffffffa003bd0e Call Trace: [<ffffffffa003bd0e>] drm_mode_page_flip_ioctl+0x1bc/0x214 [drm] [<ffffffffa00311fc>] drm_ioctl+0x25e/0x35e [drm] [<ffffffffa003bb52>] ? drm_mode_page_flip_ioctl+0x0/0x214 [drm] [<ffffffff810f1c3c>] vfs_ioctl+0x2a/0x9e [<ffffffff810f227e>] do_vfs_ioctl+0x531/0x565 [<ffffffff810f2307>] sys_ioctl+0x55/0x77 [<ffffffff810e56d6>] ? sys_read+0x47/0x6f [<ffffffff81002a2b>] system_call_fastpath+0x16/0x1b Code: 45 d4 f4 ff ff ff 0f 84 e0 02 00 00 48 8b 4d b0 49 8d 9d 20 03 00 00 48 89 df 49 89 4c 24 38 49 8b 07 49 89 44 24 20 49 8b 47 20 <48> 8b 40 58 49 c7 04 24 00 00 00 00 49 c7 44 24 18 a9 a5 08 a0 RIP [<ffffffffa008c7d3>] intel_crtc_page_flip+0xc9/0x39c [i915] RSP <ffff880114927cc8> CR2: 0000000000000058 References: Bug 28811 - [page-flipping] GPU hang when modeset after unplugging another monitor (under compiz) https://bugs.freedesktop.org/show_bug.cgi?id=28811Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Ben Skeggs 提交于
There's no convenient/reliable way for drivers to both obey the dithering mode property, and to be able to attempt to provide a good default in all cases. This commit adds an "auto" method to the property which drivers can default to if they wish, whilst still allowing the user to override the choice as they do now. Signed-off-by: NBen Skeggs <bskeggs@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Reported-by: NAlexander Y. Fomichev <git.user@gmail.com> Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Connector is actually DVI rather than HDMI. Reported-by: NtrapDoor <trapdoor6@gmail.com> Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Marek Szyprowski 提交于
System will crash sooner or later once the memory with the code of the s3c-sdhci.ko module is reused for something else. I really have no idea how the lack of remove function went unnoticed into the mainline code. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andres Salomon 提交于
My Collabora address is no longer enabled - update the MODULE_AUTHOR fields of drivers to my current email address. Signed-off-by: NAndres Salomon <dilinger@queued.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Anton Vorontsov 提交于
Simply add a proper ID into the device table. Signed-off-by: NAnton Vorontsov <avorontsov@mvista.com> Cc: Doug Thompson <dougthompson@xmission.com> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Dave Jiang <djiang@mvista.com> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Anton Vorontsov 提交于
Since commit 5753c082 ("powerpc/85xx: Kconfig cleanup"), there is no MPC85xx Kconfig symbol anymore, so the driver became non-selectable. This patch fixes the issue by switching to PPC_85xx symbol. Signed-off-by: NAnton Vorontsov <avorontsov@mvista.com> Cc: Doug Thompson <dougthompson@xmission.com> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Dave Jiang <djiang@mvista.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Francisco Jerez 提交于
this fixes a regression since the fbcon rework. Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Ben Skeggs 提交于
On nv50 it became impossible to attempt a PCI ROM shadow of the VBIOS, which will break some setups. This patch also removes the different ordering of shadow methods for pre-nv50 chipsets. The reason for the different ordering was paranoia, but it should hopefully be OK to try shadowing PRAMIN first. Signed-off-by: NBen Skeggs <bskeggs@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
This fixes a regression caused by b2ea4aa6 due to the way shared ddc with multiple digital connectors was handled. You generally have two cases where DDC lines are shared: - HDMI + VGA - HDMI + DVI-D HDMI + VGA is easy to deal with because you can check the EDID for the to see if the attached monitor is digital. A shared DDC line with two digital connectors is more complex. You can't use the hdmi bits in the EDID since they may not be there with DVI<->HDMI adapters. In this case all we can do is check the HPD pins to see which is connected as we have no way of knowing using the EDID. Reported-by: trapdoor6@gmail.com Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-