The current method for always showing physmap compat address, size, and
width is a bit confusing.  If length is set to 0, then the address and
width are still shown but silently unused.  The physmap code itself
already has logic which sets compat based on length, so just pull that out
and into the Kconfig to make everything clear.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Cc: Bryan Wu <Bryan.Wu@analog.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

...since it only probes that
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This was a reference board for which support never got merged upstream.
Kill it off, at rmk's suggestion.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Now that arch/ppc is gone we don't need CONFIG_PPC_MERGE anymore
remove the dead code associated with !CONFIG_PPC_MERGE.

The mtd maps should be using the OF based mechanism.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Acked-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Acked-By: NDavid Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Remove the Simtec BAST flash driver as this has been replaced by using
the platform flash driver.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Handle the case where flash memory and ethernet mac/phy are mapped onto
the same async bank

[try #4]
 - drop superfluous casts
 - drop SSYNC() when reading from the flash and rewrite
   bfin_copy_from() to be like bfin_copy_to() so that
   we dont have to handle all the aligned/unaligned cases

[try #3] rename bf5xx-flash to bfin-async-flash
 - move all kconfig board settings into board resources
 - fixup casting style according to lkml feedback
 - rewrite driver so that it can handle arbitrary of
   instances according to the declared platform resources

[try #2]
Remove useless SSYNC() as Will said

[try #1]
The BF533-STAMP does this for example.
All board-specific configuration goes in your board resources file.
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Acked-By: NJörn Engel <joern@logfs.org>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Once upon a time, the MTD repository was using CVS.

This patch therefore removes all usages of the no longer updated CVS
keywords from the MTD code.

This also includes code that printed them to the user.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

SH_MPC1211 has been marked as BROKEN for some time.

Unless someone is working on reviving it now, I'd therefore suggest this
patch to remove it.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Help out users by telling them the module name in the Kconfig help when
using the MTD_PHYSMAP option.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

It should be done as a physmap device, and people keep turning it on and
whining about it.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Sharp Zaurus SL-C3200 with CONFIG_MTD=m and CONFIG_MTD_SHARP_SL=y (as it
is bool) lost support for the ROM flash. With CONFIG_MTD=y it has no
problems.

It is caused by losing of compiled code of
drivers/mtd/maps/sharpsl-flash.o.
It was linked to drivers/mtd/maps/built-in.o and drivers/mtd/built-in.o,
but lost and not linked to drivers/built-in.o (because CONFIG_MTD!=y).

Patch below fixes this problem by creating sharpsl-flash.ko (and the
code works correctly as a module).
Signed-off-by: NStanislav Brabec <utx@penguin.cz>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Most of these fixes were already submitted for old kernel versions, and were
approved, but for some reason they never made it into the releases.

Because this is a consolidation of a couple old missed patches, it touches both
Kconfigs and documentation texts.
Signed-off-by: NMatt LaPlante <kernel1@cyberdogtech.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>

The Vermilion Range Expansion Bus supports four chip selects, each of which
has 64MiB of address space.  The 2nd BAR of the Expansion Bus PCI Device
is a 256MiB memory region containing the address spaces for all four of
the chip selects, with start addresses hardcoded on 64MiB boundaries.

This map driver only supports NOR flash on chip select 0.  The buswidth
(either 8 bits or 16 bits) is determined by reading the Expansion Bus Timing
and Control Register for Chip Select 0 (EXP_TIMING_CS0).
Signed-off-by: NAndy Lowe <alowe@mvista.com>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Replace Lubbock and Mainstone board drivers with common PXA2xx driver,
convert to platform driver (corresponding platform device changes merged
to kernel.org for 2.6.15), add power management callbacks.
Signed-off-by: NTodd Poynor <tpoynor@mvista.com>
Signed-off-by: NNicolas Pitre <npitre@mvista.com>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

This patch has removed Momenco Ocelot support from MTD.
Ocelot support has already removed.
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

The tqm834x map Kconfig options depends on TQM834x which does not
exist anywhere else in the kernel.

The pq2fads map Kconfig/makefile support was removed a while ago but
the actual file persisted.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

These drivers are specific to 4xx support in arch/ppc at the moment.  Make
sure they don't get built on arch/powerpc.
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This patch contains a handful of small fixes to allow the Ebony's
flash to be exposed as MTD devices via the physmap_of driver.
Specifically it:
	- Makes a small addition to the device tree and zImage wrapper
to record the correct address for the flash in the device tree based
on the board switches as reported via an FPGA register.
	- Prohibits building the old hard-coded "Ebony" flash map on
arch/powerpc kernels, in favour of using physmap_of's device tree
based approach.
	- Enables MTD and physmap_of in the Ebony defconfig.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

drivers/mtd/maps includes flash maps for the Beech and Arctic PowerPC
405LP based boards.  However, the 405LP was discontinued before any
quantity were distributed and those boards no longer have kernel
support in general.  Therefore, this patch removes this obsolete code.
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Fix various typos in kernel docs and Kconfigs, 2.6.21-rc4.
Signed-off-by: NMatt LaPlante <kernel1@cyberdogtech.com>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>

Use menuconfigs instead of menus, so the whole menu can be disabled at once
instead of going through all options.
Signed-off-by: NJan Engelhardt <jengelh@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

 o A dependency on the processor architecture does not make sense;
   delete it.
 o The Alchemy and MTX drivers requires MTD_PARTITIONS and MTD_CFI to work,
   make those dependencies.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Add flash and rootfs mappings for the PMC-Sierra MSP71xx devices.

This patch references some platform support files previously submitted to
the linux-mips@linux-mips.org list.
Signed-off-by: NMarc St-Jean <Marc_St-Jean@pmc-sierra.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

CONFIG_MTD_CK804XROM=y, CONFIG_PCI=n results in the following compile
error:

  CC      drivers/mtd/maps/ck804xrom.o
ck804xrom.c: In function 'ck804xrom_init_one':
ck804xrom.c:114: error: implicit declaration of function 'pci_dev_get'
ck804xrom.c:114: warning: assignment makes pointer from integer without a cast
make[4]: *** [drivers/mtd/maps/ck804xrom.o] Error 1

Considering what hardware this driver is driving, a dependency on PCI
also seems logical.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: Ryan Jackson <rjackson@lnxi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Support for the ITE8172 based boards was deleted a while ago so this is
dead code.

The Kconfig dependency on MIPS was wrong anyway, MIPS is a processor
architecture and nothing else; guesses on systems architecture are likely
to be wrong ...
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

ESB2ROM uses PCI interface functions.

With CONFIG_PCI=n:
drivers/mtd/maps/esb2rom.c: In function 'esb2rom_init_one':
drivers/mtd/maps/esb2rom.c:167: warning: implicit declaration of function 'pci_dev_get'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

inlined below is the patch that adds physmap driver for of_device.
It's an MTD part of the two-part support for flash/ROM devices based
on Open Firmware descriptions. The arch part (currently only PowerPC
which is no surprise) was introduced to powerpc folks earlier and
recently the older version of the powerpc part has been included into
the powerpc.git tree
(see http://www.kernel.org/git/?p=linux/kernel/git/paulus/powerpc.git;a=commitdiff;h=28f9ec349ae47c91768b7bc5607db4442c818e11).

 drivers/mtd/maps/Kconfig      |    9 +
 drivers/mtd/maps/Makefile     |    1
 drivers/mtd/maps/physmap_of.c |  255 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 265 insertions(+)
Signed-off-by: NVitaly Wool <vwool@ru.mvista.com>
Signed-off-by: NSergey Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Fix various Kconfig typos.
Signed-off-by: NMatt LaPlante <kernel1@cyberdogtech.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>

Add support for accessing BIOS flash chips connected to the NVIDIA ck804 southbridge.
Signed-off-by: NRyan Jackson <rjackson@lnxi.com>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Add MTD map driver for BIOS flash chips connected to the Intel ESB2
southbridge.

[akpm@osdl.org: coding-style fixes, build fix]
Signed-off-by: NRyan Jackson <rjackson@lnxi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

The iq80310 mtd map driver depends on ARCH_IQ80310, which isn't
defined anywhere in the tree (as we don't have 80310 support), and
furthermore, everything the driver does can be done with physmap
instead.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

map/physmap.c tries to probe "cfi_probe", "jedec_probe" and "map_rom", but
map/Kconfig says it depends on MTD_CFI only.
This patch adds  MTD_JEDECPROBE and MTD_ROM to the dependency condition.
Signed-off-by: NTakashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: NJosh Boyer <jwboyer@gmail.com>

This removes all the leading whitespace kconfig now warns about.
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

The following difference was found between the mainline and linux-mips
kernel.  LASAT depends on MTD_CFI.
Signed-off-by: NMartin Michlmayr <tbm@cyrius.com>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Signed-off-by: NEgry Gábor <gaboregry@t-online.hu>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Default values for boolean and tristate options can only be 'y', 'm' or 'n'.
This patch removes wrong default for MTD_PCMCIA_ANONYMOUS.
Signed-off-by: NJean-Luc Leger <jean-luc.leger@dspnet.fr.eu.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>