Driver which handles device command operation.
Details on device operations are available here:
http://www.numonyx.com/Documents/Datasheets/DS-315768_Velocity-Discrete.pdfSigned-off-by: NAlexey Korolev <akorolev@infradead.org>
Acked-by: NJared Hulbert <jaredeh@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

LPDDR flash chips are based on completely new kind of chips probing.
Device capabilities are available via special request.
We sent field request command which contains Major and Minor numbers - and
recieve corresponend value.
All requests are performed within PFOW window.
Detailed information about qinfo records can be found here:
http://www.numonyx.com/Documents/Datasheets/DS-315768_Velocity-Discrete.pdfSigned-off-by: NAlexey Korolev <akorolev@infradead.org>
Acked-by: NJared Hulbert <jaredeh@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

The various fields in NDTR{01} are in units of clock ticks minus one, but the
ns2cycle macro mistakenly adds one, inflating the number of clock ticks and
making it impossible to set any of these fields to zero.
Signed-off-by: NMatt Reimer <mreimer@vpop.net>
Signed-off-by: NEric Miao <eric.miao@marvell.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Reads from non-page-aligned addresses were broken because while the
address to read from was correctly written to NDCB*, a full page was
always read. Fix this by ignoring the column and only using the page
address.

I suspect this whole-page behavior is due to the controller's need to
read the entire page in order to generate correct ECC. In the non-ECC
case this could be optimized to use the column address, and to set the
read length to what is being requested rather than the length of an
entire page.
Signed-off-by: NMatt Reimer <mreimer@vpop.net>
Signed-off-by: NEric Miao <eric.miao@marvell.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Fix sched.h references:

build-r7149.out:/local/linsrc/linux-next-20081215/drivers/mtd/nand/nandsim.c:1326: error: dereferencing pointer to incomplete type
build-r7149.out:/local/linsrc/linux-next-20081215/drivers/mtd/nand/nandsim.c:1326: error: 'PF_MEMALLOC' undeclared (first use in this function)
build-r7149.out:/local/linsrc/linux-next-20081215/drivers/mtd/nand/nandsim.c:1328: error: dereferencing pointer to incomplete type
build-r7149.out:/local/linsrc/linux-next-20081215/drivers/mtd/nand/nandsim.c:1335: error: dereferencing pointer to incomplete type
build-r7149.out:/local/linsrc/linux-next-20081215/drivers/mtd/nand/nandsim.c:1335: error: 'PF_MEMALLOC' undeclared (first use in this function)
build-r7149.out:make[4]: *** [drivers/mtd/nand/nandsim.o] Error 1
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This set of patches introduces calls to the following set of functions:

usb_endpoint_dir_in(epd)
usb_endpoint_dir_out(epd)
usb_endpoint_is_bulk_in(epd)
usb_endpoint_is_bulk_out(epd)
usb_endpoint_is_int_in(epd)
usb_endpoint_is_int_out(epd)
usb_endpoint_num(epd)
usb_endpoint_type(epd)
usb_endpoint_xfer_bulk(epd)
usb_endpoint_xfer_control(epd)
usb_endpoint_xfer_int(epd)
usb_endpoint_xfer_isoc(epd)

In some cases, introducing one of these functions is not possible, and it
just replaces an explicit integer value by one of the following constants:

USB_ENDPOINT_XFER_BULK
USB_ENDPOINT_XFER_CONTROL
USB_ENDPOINT_XFER_INT
USB_ENDPOINT_XFER_ISOC

An extract of the semantic patch that makes these changes is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r1@ struct usb_endpoint_descriptor *epd; @@

- ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) ==
- \(USB_ENDPOINT_XFER_CONTROL\|0\))
+ usb_endpoint_xfer_control(epd)

@r5@ struct usb_endpoint_descriptor *epd; @@

- ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) ==
-  \(USB_DIR_IN\|0x80\))
+ usb_endpoint_dir_in(epd)

@inc@
@@

#include <linux/usb.h>

@depends on !inc && (r1||r5)@
@@

+ #include <linux/usb.h>
  #include <linux/usb/...>
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Add standard interfaces for alarm/update irqs enabling.  Drivers are no
more required to implement equivalent ioctl code as rtc-dev will provide
it.

UIE emulation should now be handled correctly and will work even for those
RTC drivers who cannot be configured to do both UIE and AIE.
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The function viafb_cursor() uses 2 stack-variables of CURSOR_SIZE bits;
CURSOR_SIZE is defined as (8 * 1024).  Using up twice 1k on stack is too
much for 4k-stack (though it works with 8k-stacks).  Make those two
variables kzalloc'ed to preserve stack space.

Also merge the whole lot of local struct's in viafb_ioctl into a union so
the stack usage gets minimized here as well.  (struct's are only accessed
in their indicidual IOCTL case) This second part is only compile-tested as
I know of no userspace app using the IOCTLs.
Signed-off-by: NBruno Prémont <bonbons@linux-vserver.org>
Cc: <JosephChan@via.com.tw>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

those two functions only used in that C file
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

CONFIG_NR_CPUS will be defined for all arch's whether SMP or not, but
it may not have made it into all arches yet.
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: Reduce memory usage, use new API.

This is part of an effort to reduce structure sizes for machines
configured with large NR_CPUS.  cpumask_t gets replaced by
cpumask_var_t, which is either struct cpumask[1] (small NR_CPUS) or
struct cpumask * (large NR_CPUS).

(Changes to powernow-k* by <travis>.)
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NMike Day <ncmike@ncultra.org>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

These two IOMMUs can implement the current version of this API. So
select the API if one or both of these IOMMU drivers is selected.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

This API can be used by KVM for accessing different types of IOMMUs to
do device passthrough to guests. Beside that this API can also be used
by device drivers to map non-linear host memory into dma-linear
addresses to prevent sgather-gather DMA. UIO may be another user for
this API.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>

When domain is related to multiple iommus, need to check if the minimum agaw is sufficient for the mapped memory
Signed-off-by: NWeidong Han <weidong.han@intel.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

These APIs are used by KVM to use VT-d
Signed-off-by: NWeidong Han <weidong.han@intel.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

vm_domid won't be set in context, find available domain id for a device from its iommu.

For a virtual machine domain, a default agaw will be set, and skip top levels of page tables for iommu which has less agaw than default.
Signed-off-by: NWeidong Han <weidong.han@intel.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

virtual machine domain is different from native DMA-API domain, implement separate allocation and free functions for virtual machine domain.
Signed-off-by: NWeidong Han <weidong.han@intel.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Because virtual machine domain may have multiple devices from different iommus, it cannot use __iommu_flush_cache.

In some common low level functions, use domain_flush_cache instead of __iommu_flush_cache. On the other hand, in some functions, iommu can is specified or domain cannot be got, still use __iommu_flush_cache
Signed-off-by: NWeidong Han <weidong.han@intel.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Add iommu reference count in domain, and add a lock to protect iommu setting including iommu_bmp, iommu_count and iommu_coherency.

virtual machine domain may have multiple devices from different iommus, so it needs to do more things when add/remove domain device info. Thus implement separate these functions for virtual machine domain.
Signed-off-by: NWeidong Han <weidong.han@intel.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Add this flag for VT-d used in virtual machine, like KVM.
Signed-off-by: NWeidong Han <weidong.han@intel.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

In dmar_domain, more than one iommus may be included in iommu_bmp. Due to "Coherency" capability may be different across iommus, set this variable to indicate iommu access is coherent or not. Only when all related iommus in a dmar_domain are all coherent, iommu access of this domain is coherent.
Signed-off-by: NWeidong Han <weidong.han@intel.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

"SAGAW" capability may be different across iommus. Use a default agaw, but if default agaw is not supported in some iommus, choose a less supported agaw.
Signed-off-by: NWeidong Han <weidong.han@intel.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

In order to support assigning multiple devices from different iommus to a domain, iommu bitmap is used to keep all iommus the domain are related to.
Signed-off-by: NWeidong Han <weidong.han@intel.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

deferred_flush[] uses the iommu seq_id to index, so its iommu is fixed and can get it from g_iommus.
Signed-off-by: NWeidong Han <weidong.han@intel.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Signed-off-by: NWeidong Han <weidong.han@intel.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Signed-off-by: NWeidong Han <weidong.han@intel.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

It's random number after the domain is allocated by kmem_cache_alloc
Signed-off-by: NWeidong Han <weidong.han@intel.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

The radio_release function of the BTTV driver is missing a call to
v4l2_prio_close. As a result, after the radio device has been opened at
least once (e.g., by HAL during bootup), v4l2_priority will never drop below
V4L2_PRIORITY_INTERACTIVE again. With the following patch against 2.6.28,
applications that run with V4L2_PRIORITY_BACKGROUND are able to open devices
again. Previous Linux versions are affected as well.
Signed-off-by: NUdo Steinberg <udo@hypervisor.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This code had calls to both usb_set_intfdata and dev_set_drvdata, doing the
same thing.

The semantic patch that lead to finding this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@header@
@@

@same depends on header@
position p;
@@

usb_set_intfdata@p(...) { ... }

@depends on header@
position _p!=same.p;
identifier _f;
struct usb_interface *intf;
expression data;
@@

_f@_p(...) { <+...
- dev_set_drvdata(&intf->dev, data);
+ usb_set_intfdata(intf, data);
...+> }

// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

On platforms with multiple PCI segments, any of the segments can have a DRHD
with INCLUDE_PCI_ALL flag. So need to check the DRHD's segment number against
the PCI device's when searching its DRHD.
Signed-off-by: NYu Zhao <yu.zhao@intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Some macros were unused, so I just dropped them:

  context_fault_disable
  context_translation_type
  context_address_root
  context_address_width
  context_domain_id
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>