This adds PCI ID for IVB GT2 server variant which we were missing.
Signed-off-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
[danvet: fix up conflict because the patch has been diffed against next. tsk.]
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Noticed by staring at intel_reg_dumper diffs. Unfortunately it does
not seem to completely fix the bug.

Still, it's good to get this right, and maybe it helps someplace else.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47117Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Ben Widawsky reported missed IRQ issues and this patch here helps.

We have one other missed IRQ report still left on snb, reported by QA:

https://bugs.freedesktop.org/show_bug.cgi?id=46145

This is _not_ a regression due to the forcewake voodoo though, it
started showing up before that was applied and has been on-and-off for
the past few weeks. According to QA this patch does not help. But the
missed IRQ is always from the blt ring (despite running piglit, so
also render activity expected), so I'm hopefully that this is an issue
with the blt ring itself.
Tested-by: NBen Widawsky <ben@bwidawsk.net>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Somehow the BIOS manages to screw things up when copying the VBT
around, because the one we scrap from the VBIOS rom actually works.

Cc: stable@kernel.org
Tested-by: NMarkus Heinz <markus.heinz@uni-dortmund.de>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=28812Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is yet another chapter in the ongoing saga of bringing RC6 to Sandy
Bridge machines by default.

Now that we have discovered that RC6 issues are triggered by RC6+ state,
let's try to disable it by default. Plain RC6 is the one responsible for
most energy savings, and so far it haven't given any problems - at least,
none we are aware of.

So with this, when i915_enable_rc6=-1 (e.g., the default value), we'll
attempt to enable plain RC6 only on SNB. For Ivy Bridge, the behavior
stays the same as always - we enable both RC6 and deep RC6.

Note that while this exact patch does not has explicit tested-by's, the
equivalent settings were fixed in 3.3 kernel by a smaller patch. And it
has also received considerable testing through Canonical RC6 task-force
testing at https://wiki.ubuntu.com/Kernel/PowerManagementRC6. Up to date,
it looks like all the known issues are gone.

v2: improve description and reference a couple of open bugs related to
RC6 which seem to be fixed with this change.

References: https://bugs.freedesktop.org/show_bug.cgi?id=41682
References: https://bugs.freedesktop.org/show_bug.cgi?id=38567
References: https://bugs.freedesktop.org/show_bug.cgi?id=44867Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This allows to select which rc6 modes are to be used via kernel parameter,
via a bitmask parameter. E.g.:

- to enable rc6, i915_enable_rc6=1
- to enable rc6 and deep rc6, i915_enable_rc6=3
- to enable rc6 and deepest rc6, use i915_enable_rc6=5
- to enable rc6, deep and deepest rc6, use i915_enable_rc6=7

Please keep in mind that the deepest RC6 state really should NOT be used
by default, as it could potentially worsen the issues with deep RC6. So do
enable it only when you know what you are doing. However, having it around
could help solving possible future rc6-related issues and their debugging
on user machines.

Note that this changes behavior - previously, value of 1 would enable both
RC6 and deep RC6. Now it should only enable RC6 and deep/deepest RC6
stages must be enabled manually.

v2: address Chris Wilson comments and clean up the code.

References: https://bugs.freedesktop.org/show_bug.cgi?id=42579Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NBen Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The BLT commands on gen2/3 utilize the fence registers and so we cannot
modify any fences for the object whilst those commands are in flight.
Currently we marked tiled commands as occupying a fence, but forgot to
restrict the untiled commands from preventing a fence being assigned
before they were completed.

One side-effect is that we ten have to double check that a fence was
allocated for a fenced buffer during move-to-active.
Reported-by: NJiri Slaby <jirislaby@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43427
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47990Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Testcase: i-g-t/tests/gem_tiled_after_untiled_blt
Tested-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The ppgtt page directory lives in a snatched part of the gtt pte
range. Which naturally gets cleared on hibernate when we pull the
power. Suspend to ram (which is what I've tested) works because
despite the fact that this is a mmio region, it is actually back by
system ram.

Fix this by moving the page directory setup code to the ppgtt init
code (which gets called on resume).

This fixes hibernate on my ivb and snb.
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Quoting the BSpec from time immemorial:

  PIPEACONF, bits 28:27: Frame Start Delay (Debug)

  Used to delay the frame start signal that is sent to the display planes.
  Care must be taken to insure that there are enough lines during VBLANK
  to support this setting.

An instance of the BIOS leaving these bits set was found in the wild,
where it caused our modesetting to go all squiffy and skewiff.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47271Reported-and-tested-by: NEva Wang <evawang@linpus.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43012Reported-and-tested-by: NCarl Richell <carl@system76.com>
Cc: stable@kernel.org
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Looking at hibernate overwriting I though it looked like a cursor,
so I tracked down this missing piece to stop the cursor blink
timer. I've no idea if this is sufficient to fix the hibernate
problems people are seeing, but please test it.

Both radeon and nouveau have done this for a long time.

I've run this personally all night hib/resume cycles with no fails.
Reviewed-by: NKeith Packard <keithp@keithp.com>
Reported-by: NPetr Tesarik <kernel@tesarici.cz>
Reported-by: NStanislaw Gruszka <sgruszka@redhat.com>
Reported-by: Lots of misc segfaults after hibernate across the world.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=37142Tested-by: NDave Airlie <airlied@redhat.com>
Tested-by: NBojan Smojver <bojan@rexursive.com>
Tested-by: NAndreas Hartmann <andihartmann@01019freenet.de>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fixes spurious warnings.
Tested-by: NDave Jones <davej@redhat.com>
Tested-by: NSteven Rostedt <rostedt@goodmis.org>
Tested-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

For 6xx+.  Required for mesa to use htile support for HiZ/HiS.
Userspace will check radeon version 2.14 with is bumped either
by tiling patch or stream out patch. This patch only add support
for htile relocation which should be enough for any userspace
to implement the hyperz (using htile buffer) feature.

v2: Jerome: Fix size checking for htile buffer.
v3: Jerome: Adapt on top of r600/evergreen cs checker changes,
            also check htile surface in case only stencil is
            present.
Signed-off-by: NPierre-Eric Pelloux-Prayer <pelloux@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Using the bpc (bits per color) specified by the monitor
can cause problems in some cases.  Until we get a better
handle on how to deal with those cases, just use a bpc of 8.
Reported-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fixes i2c on my TNT2.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

A few reports of bad behaviour since the autodetection defaulted to 6bpc,
lets fix this.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

drivers/built-in.o: In function `mdfld_dsi_connector_set_property':
mdfld_dsi_output.c:(.text+0x6e909): undefined reference to `mdfld_set_brightness'
make: *** [.tmp_vmlinux1] Error 1
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

There's really no good reason for us to be in here anymore, we have to
maintain this ABI anyway to avoid angering people.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The time has come to get a proper version number that we can change to
indicate new features etc, rather than the lock-step 0.0.XX that we
previously had.

libdrm has recognised this version as compatible with 0.0.16 since 2.4.22,
so hopefully any breakage people see should be very minimal.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This happens somehow during init on a machine I have, and leads to a
divide-by-zero.

Lets avoid that...
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

All available subchannels are now available for userspace to do with as it
pleases on NVC0+.

On all earlier chipsets, the kernel still uses a software object on subc 0
to implement the page flip completion method.  I hope to find some decent
way of addressing this too, but it's a tad tricker prior to fermi.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Removes need for M2MF subchannel usage on NVC0+.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

I want to be able to use REF_CNT from other places in the kernel without
pushing a fence object onto the list of emitted fences.

The current code makes an assumption that every time the acked sequence is
bumped that there's at least one fence on the list that'll be signalled.

This will no longer be true in the near future.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

These are FIFO methods, it doesn't matter what subchannel is being used.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

There was once good reasons for wanting the drm to be able to use M2MF etc
on user channels, but they're not relevant anymore.  For the general
buffer move case, we've already lost by transferring between vram/sysmem
already so the context switching overhead is minimal in comparison.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NMatt Turner <mattst88@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NMatt Turner <mattst88@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

It's already defined in drm_edid.h.
Signed-off-by: NMatt Turner <mattst88@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

this driver would be used for wireless display. virtual display
driver has independent crtc, encoder and connector and to use
this driver, user application should send edid data to this driver
from wireless display.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Trinity (TN) is an APU with:
- Cayman 3D
- DCE6.1 display
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

v2: fix check for MC ucode from Tom.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>