drm/i915: allow to select rc6 modes via kernel parameter

This allows to select which rc6 modes are to be used via kernel parameter,
via a bitmask parameter. E.g.:

- to enable rc6, i915_enable_rc6=1
- to enable rc6 and deep rc6, i915_enable_rc6=3
- to enable rc6 and deepest rc6, use i915_enable_rc6=5
- to enable rc6, deep and deepest rc6, use i915_enable_rc6=7

Please keep in mind that the deepest RC6 state really should NOT be used
by default, as it could potentially worsen the issues with deep RC6. So do
enable it only when you know what you are doing. However, having it around
could help solving possible future rc6-related issues and their debugging
on user machines.

Note that this changes behavior - previously, value of 1 would enable both
RC6 and deep RC6. Now it should only enable RC6 and deep/deepest RC6
stages must be enabled manually.

v2: address Chris Wilson comments and clean up the code.

References: https://bugs.freedesktop.org/show_bug.cgi?id=42579Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NBen Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_drv.c

@@ -66,7 +66,11 @@ MODULE_PARM_DESC(semaphores,
 int i915_enable_rc6 __read_mostly = -1;
 module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0600);
 MODULE_PARM_DESC(i915_enable_rc6,
-		"Enable power-saving render C-state 6 (default: -1 (use per-chip default)");
+		"Enable power-saving render C-state 6. "
+		"Different stages can be selected via bitmask values "
+		"(0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6). "
+		"For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. "
+		"default: -1 (use per-chip default)");
 
 int i915_enable_fbc __read_mostly = -1;
 module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600);

drivers/gpu/drm/i915/i915_drv.h

@@ -1053,6 +1053,27 @@ struct drm_i915_file_private {
 
 #include "i915_trace.h"
 
+/**
+ * RC6 is a special power stage which allows the GPU to enter an very
+ * low-voltage mode when idle, using down to 0V while at this stage.  This
+ * stage is entered automatically when the GPU is idle when RC6 support is
+ * enabled, and as soon as new workload arises GPU wakes up automatically as well.
+ *
+ * There are different RC6 modes available in Intel GPU, which differentiate
+ * among each other with the latency required to enter and leave RC6 and
+ * voltage consumed by the GPU in different states.
+ *
+ * The combination of the following flags define which states GPU is allowed
+ * to enter, while RC6 is the normal RC6 state, RC6p is the deep RC6, and
+ * RC6pp is deepest RC6. Their support by hardware varies according to the
+ * GPU, BIOS, chipset and platform. RC6 is usually the safest one and the one
+ * which brings the most power savings; deeper states save more power, but
+ * require higher latency to switch to and wake up.
+ */
+#define INTEL_RC6_ENABLE			(1<<0)
+#define INTEL_RC6p_ENABLE			(1<<1)
+#define INTEL_RC6pp_ENABLE			(1<<2)
+
 extern struct drm_ioctl_desc i915_ioctls[];
 extern int i915_max_ioctl;
 extern unsigned int i915_fbpercrtc __always_unused;

drivers/gpu/drm/i915/intel_display.c

@@ -8221,7 +8221,7 @@ void intel_init_emon(struct drm_device *dev)
 	dev_priv->corr = (lcfuse & LCFUSE_HIV_MASK);
 }
 
-static bool intel_enable_rc6(struct drm_device *dev)
+static int intel_enable_rc6(struct drm_device *dev)
 {
 	/*
 	 * Respect the kernel parameter if it is set
@@ -8253,6 +8253,7 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv)
 	u32 pcu_mbox, rc6_mask = 0;
 	u32 gtfifodbg;
 	int cur_freq, min_freq, max_freq;
+	int rc6_mode;
 	int i;
 
 	/* Here begins a magic sequence of register writes to enable
@@ -8290,9 +8291,20 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv)
 	I915_WRITE(GEN6_RC6p_THRESHOLD, 100000);
 	I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */
 
-	if (intel_enable_rc6(dev_priv->dev))
-		rc6_mask = GEN6_RC_CTL_RC6_ENABLE |
-			((IS_GEN7(dev_priv->dev)) ? GEN6_RC_CTL_RC6p_ENABLE : 0);
+	rc6_mode = intel_enable_rc6(dev_priv->dev);
+	if (rc6_mode & INTEL_RC6_ENABLE)
+		rc6_mask |= GEN6_RC_CTL_RC6_ENABLE;
+
+	if (rc6_mode & INTEL_RC6p_ENABLE)
+		rc6_mask |= GEN6_RC_CTL_RC6p_ENABLE;
+
+	if (rc6_mode & INTEL_RC6pp_ENABLE)
+		rc6_mask |= GEN6_RC_CTL_RC6pp_ENABLE;
+
+	DRM_INFO("Enabling RC6 states: RC6 %s, RC6p %s, RC6pp %s\n",
+			(rc6_mode & INTEL_RC6_ENABLE) ? "on" : "off",
+			(rc6_mode & INTEL_RC6p_ENABLE) ? "on" : "off",
+			(rc6_mode & INTEL_RC6pp_ENABLE) ? "on" : "off");
 
 	I915_WRITE(GEN6_RC_CONTROL,
 		   rc6_mask |