This is needed so that we can support both hash and radix page table
using single kernel. Radix kernel uses a 4 level table.

We now use physical address in upper page table tree levels. Even though
they are aligned to their size, for the masked bits we use the
bit positions as per PowerISA 3.0.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We remove real_pte_t out of STRICT_MM_TYPESCHECK.
Reviewed-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We move the page table accessors into a separate header. We will
later add a big endian variant of the table which is needed for radix.
No functionality change only code movement.
Reviewed-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This patch adds the ability to be able to save the VSX registers to the
thread struct without giving up (disabling the facility) next time the
process returns to userspace.

This patch builds on a previous optimisation for the FPU and VEC registers
in the thread copy path to avoid a possibly pointless reload of VSX state.
Signed-off-by: NCyril Bur <cyrilbur@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This patch adds the ability to be able to save the VEC registers to the
thread struct without giving up (disabling the facility) next time the
process returns to userspace.

This patch builds on a previous optimisation for the FPU registers in the
thread copy path to avoid a possibly pointless reload of VEC state.
Signed-off-by: NCyril Bur <cyrilbur@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This patch adds the ability to be able to save the FPU registers to the
thread struct without giving up (disabling the facility) next time the
process returns to userspace.

This patch optimises the thread copy path (as a result of a fork() or
clone()) so that the parent thread can return to userspace with hot
registers avoiding a possibly pointless reload of FPU register state.
Signed-off-by: NCyril Bur <cyrilbur@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This prepares for the decoupling of saving {fpu,altivec,vsx} registers and
marking {fpu,altivec,vsx} as being unused by a thread.

Currently giveup_{fpu,altivec,vsx}() does both however optimisations to
task switching can be made if these two operations are decoupled.
save_all() will permit the saving of registers to thread structs and leave
threads MSR with bits enabled.

This patch introduces no functional change.
Signed-off-by: NCyril Bur <cyrilbur@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Currently the FPU, VEC and VSX facilities are lazily loaded. This is not
a problem unless a process is using these facilities.

Modern versions of GCC are very good at automatically vectorising code,
new and modernised workloads make use of floating point and vector
facilities, even the kernel makes use of vectorised memcpy.

All this combined greatly increases the cost of a syscall since the
kernel uses the facilities sometimes even in syscall fast-path making it
increasingly common for a thread to take an *_unavailable exception soon
after a syscall, not to mention potentially taking all three.

The obvious overcompensation to this problem is to simply always load
all the facilities on every exit to userspace. Loading up all FPU, VEC
and VSX registers every time can be expensive and if a workload does
avoid using them, it should not be forced to incur this penalty.

An 8bit counter is used to detect if the registers have been used in the
past and the registers are always loaded until the value wraps to back
to zero.

Several versions of the assembly in entry_64.S were tested:

  1. Always calling C.
  2. Performing a common case check and then calling C.
  3. A complex check in asm.

After some benchmarking it was determined that avoiding C in the common
case is a performance benefit (option 2). The full check in asm (option
3) greatly complicated that codepath for a negligible performance gain
and the trade-off was deemed not worth it.
Signed-off-by: NCyril Bur <cyrilbur@gmail.com>
[mpe: Move load_vec in the struct to fill an existing hole, reword change log]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

fixup

htab_get_table_size() either retrieve the size of the hash page table (HPT)
from the device tree - if the HPT size is determined by firmware - or
uses a heuristic to determine a good size based on RAM size if the kernel
is responsible for allocating the HPT.

To support a PAPR extension allowing resizing of the HPT, we're going to
want the memory size -> HPT size logic elsewhere, so split it out into a
helper function.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

At the moment the hpte_removebolted callback in ppc_md returns void and
will BUG_ON() if the hpte it's asked to remove doesn't exist in the first
place.  This is awkward for the case of cleaning up a mapping which was
partially made before failing.

So, we add a return value to hpte_removebolted, and have it return ENOENT
in the case that the HPTE to remove didn't exist in the first place.

In the (sole) caller, we propagate errors in hpte_removebolted to its
caller to handle.  However, we handle ENOENT specially, continuing to
complete the unmapping over the specified range before returning the error
to the caller.

This means that htab_remove_mapping() will work sanely on a partially
present mapping, removing any HPTEs which are present, while also returning
ENOENT to its caller in case it's important there.

There are two callers of htab_remove_mapping():
   - In remove_section_mapping() we already WARN_ON() any error return,
     which is reasonable - in this case the mapping should be fully
     present
   - In vmemmap_remove_mapping() we BUG_ON() any error.  We change that to
     just a WARN_ON() in the case of ENOENT, since failing to remove a
     mapping that wasn't there in the first place probably shouldn't be
     fatal.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Signed-off-by: NAdam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Now that other PTE fields have been moved out of the way, we can
expand the RPN field of the PTE on 64-bit Book 3S systems and align
it with the RPN field in the radix PTE format used by PowerISA v3.0
CPUs in radix mode.  For 64k page size, this means we need to move
the _PAGE_COMBO and _PAGE_4K_PFN bits.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This moves the _PAGE_SPECIAL and _PAGE_SOFT_DIRTY bits in the Linux
PTE on 64-bit Book 3S systems to bit positions which are designated
for software use in the radix PTE format used by PowerISA v3.0 CPUs
in radix mode.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This moves the _PAGE_EXEC, _PAGE_RW and _PAGE_USER bits around in
the Linux PTE on 64-bit Book 3S systems to correspond with the bit
positions used in radix mode by PowerISA v3.0 CPUs.  This also adds
a _PAGE_READ bit corresponding to the read permission bit in the
radix PTE.  _PAGE_READ is currently unused but could possibly be used
in future to improve pte_protnone().
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This moves the _PAGE_HASHPTE, _PAGE_F_GIX and _PAGE_F_SECOND fields in
the Linux PTE on 64-bit Book 3S systems to the most significant byte.
Of the 5 bits, one is a software-use bit and the other four are
reserved bit positions in the PowerISA v3.0 radix PTE format.
Using these bits is OK because these bits are all to do with tracking
the HPTE(s) associated with the Linux PTE, and therefore won't be
needed in radix mode.  This frees up bit positions in the lower two
bytes.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This changes _PAGE_PTE for 64-bit Book 3S processors from 0x1 to
0x4000_0000_0000_0000, because that bit is used as the L (leaf)
bit by PowerISA v3.0 CPUs in radix mode.  The "leaf" bit indicates
that the PTE points to a page directly rather than another radix
level, which is what the _PAGE_PTE bit means.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This changes _PAGE_PRESENT for 64-bit Book 3S processors from 0x2 to
0x8000_0000_0000_0000, because that is where PowerISA v3.0 CPUs in
radix mode will expect to find it.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This changes the Linux page tables to store physical addresses
rather than kernel virtual addresses in the upper levels of the
tree (pgd, pud and pmd) for 64-bit Book 3S machines.

This also changes the hugepd pointers used to implement hugepages
when the base page size is 4k to store physical addresses rather than
virtual addresses (again just for 64-bit Book3S machines).

This frees up some high order bits, and will be needed with
PowerISA v3.0 machines which read the page table tree in hardware
in radix mode.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This frees up bits 57-63 in the Linux PTE on 64-bit Book 3S machines.
In the 4k page case, this is done just by reducing the size of the
RPN field to 39 bits, giving 51-bit real addresses.  In the 64k page
case, we had 10 unused bits in the middle of the PTE, so this moves
the RPN field down 10 bits to make use of those unused bits.  This
means the RPN field is now 3 bits larger at 37 bits, giving 53-bit
real addresses in the normal case, or 49-bit real addresses for the
special 4k PFN case.

We are doing this in order to be able to move some other PTE bits
into the positions where PowerISA V3.0 processors will expect to
find them in radix-tree mode.  Ultimately we will be able to move
the RPN field to lower bit positions and make it larger.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

No code changes.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

__xchg_called_with_bad_pointer() can't tell us which code uses {cmp}xchg
with an unsupported size, and no error is reported until the link stage.

To make such problems easier to debug, use BUILD_BUG_ON_MSG() instead.
Signed-off-by: Npan xinhui <xinhui.pan@linux.vnet.ibm.com>
[mpe: Tweak change log wording & add relaxed/acquire]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

fixup

Add a cputable entry for POWER9.  More code is required to actually
boot and run on a POWER9 but this gets the base piece in which we can
start building on.

Copies over from POWER8 except for:
- Adds a new CPU_FTR_ARCH_300 bit to start hanging new architecture
   features from (in subsequent patches).
- Advertises new user features bits PPC_FEATURE2_ARCH_3_00 &
  HAS_IEEE128 when on POWER9.
- Drops CPU_FTR_SUBCORE.
- Drops PMU code and machine check.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Subcores isn't really part of the 2.07 architecture but currently we
turn it on using the 2.07 feature bit.  Subcores is really a POWER8
specific feature.

This adds a new CPU_FTR bit just for subcores and moves the subcore
init code over to use this.
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Implement cmpxchg{,64}_relaxed and atomic{,64}_cmpxchg_relaxed, based on
which _release variants can be built.

To avoid superfluous barriers in _acquire variants, we implement these
operations with assembly code rather use __atomic_op_acquire() to build
them automatically.

For the same reason, we keep the assembly implementation of fully
ordered cmpxchg operations.

However, we don't do the similar for _release, because that will require
putting barriers in the middle of ll/sc loops, which is probably a bad
idea.

Note cmpxchg{,64}_relaxed and atomic{,64}_cmpxchg_relaxed are not
compiler barriers.
Signed-off-by: NBoqun Feng <boqun.feng@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Implement xchg{,64}_relaxed and atomic{,64}_xchg_relaxed, based on these
_relaxed variants, release/acquire variants and fully ordered versions
can be built.

Note that xchg{,64}_relaxed and atomic_{,64}_xchg_relaxed are not
compiler barriers.
Signed-off-by: NBoqun Feng <boqun.feng@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

On powerpc, acquire and release semantics can be achieved with
lightweight barriers("lwsync" and "ctrl+isync"), which can be used to
implement __atomic_op_{acquire,release}.

For release semantics, since we only need to ensure all memory accesses
that issue before must take effects before the -store- part of the
atomics, "lwsync" is what we only need. On the platform without
"lwsync", "sync" should be used. Therefore in __atomic_op_release() we
use PPC_RELEASE_BARRIER.

For acquire semantics, "lwsync" is what we only need for the similar
reason.  However on the platform without "lwsync", we can use "isync"
rather than "sync" as an acquire barrier. Therefore in
__atomic_op_acquire() we use PPC_ACQUIRE_BARRIER, which is barrier() on
UP, "lwsync" if available and "isync" otherwise.

Implement atomic{,64}_{add,sub,inc,dec}_return_relaxed, and build other
variants with these helpers.
Signed-off-by: NBoqun Feng <boqun.feng@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

With ppc64 we use the deposited pgtable_t to store the hash pte slot
information. We should not withdraw the deposited pgtable_t without
marking the pmd none. This ensure that low level hash fault handling
will skip this huge pte and we will handle them at upper levels.

Recent change to pmd splitting changed the above in order to handle the
race between pmd split and exit_mmap. The race is explained below.

Consider following race:

		CPU0				CPU1
shrink_page_list()
  add_to_swap()
    split_huge_page_to_list()
      __split_huge_pmd_locked()
        pmdp_huge_clear_flush_notify()
	// pmd_none() == true
					exit_mmap()
					  unmap_vmas()
					    zap_pmd_range()
					      // no action on pmd since pmd_none() == true
	pmd_populate()

As result the THP will not be freed. The leak is detected by check_mm():

	BUG: Bad rss-counter state mm:ffff880058d2e580 idx:1 val:512

The above required us to not mark pmd none during a pmd split.

The fix for ppc is to clear the huge pte of _PAGE_USER, so that low
level fault handling code skip this pte. At higher level we do take ptl
lock. That should serialze us against the pmd split. Once the lock is
acquired we do check the pmd again using pmd_same. That should always
return false for us and hence we should retry the access. We do the
pmd_same check in all case after taking plt with
THP (do_huge_pmd_wp_page, do_huge_pmd_numa_page and
huge_pmd_set_accessed)

Also make sure we wait for irq disable section in other cpus to finish
before flipping a huge pte entry with a regular pmd entry. Code paths
like find_linux_pte_or_hugepte depend on irq disable to get
a stable pte_t pointer. A parallel thp split need to make sure we
don't convert a pmd pte to a regular pmd entry without waiting for the
irq disable section to finish.

Fixes: eef1b3ba ("thp: implement split_huge_pmd()")
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

When PE is created, its primary bus is cached to pe->bus. At later
point, the cached primary bus is returned from eeh_pe_bus_get().
However, we could get stale cached primary bus and run into kernel
crash in one case: full hotplug as part of fenced PHB error recovery
releases all PCI busses under the PHB at unplugging time and recreate
them at plugging time. pe->bus is still dereferencing the PCI bus
that was released.

This adds another PE flag (EEH_PE_PRI_BUS) to represent the validity
of pe->bus. pe->bus is updated when its first child EEH device is
online and the flag is set. Before unplugging in full hotplug for
error recovery, the flag is cleared.

Fixes: 8cdb2833 ("powerpc/eeh: Trace PCI bus from PE")
Cc: stable@vger.kernel.org #v3.11+
Reported-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Reported-by: NPradipta Ghosh <pradghos@in.ibm.com>
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Tested-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

If a cpu is hotplugged while the hcall trace points are active, it's
possible to hit a warning from RCU due to the trace points calling into
RCU from an offline cpu, eg:

  RCU used illegally from offline CPU!
  rcu_scheduler_active = 1, debug_locks = 1

Make the hypervisor tracepoints conditional by using
TRACE_EVENT_FN_COND.
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NDenis Kirjanov <kda@linux-powerpc.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

When M64 BAR is set to Single PE mode, the PE# assigned to VF could be
sparse.

This patch restructures the code to allocate sparse PE# for VFs when M64
BAR is set to Single PE mode. Also it rename the offset to pe_num_map to
reflect the content is the PE number.
Signed-off-by: NWei Yang <weiyang@linux.vnet.ibm.com>
Reviewed-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Acked-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In current implementation, when VF BAR is bigger than 64MB, it uses 4 M64
BARs in Single PE mode to cover the number of VFs required to be enabled.
By doing so, several VFs would be in one VF Group and leads to interference
between VFs in the same group.

And in this patch, m64_wins is renamed to m64_map, which means index number
of the M64 BAR used to map the VF BAR. Based on Gavin's comments. Also
makes sure the VF BAR size is bigger than 32MB when M64 BAR is used in
Single PE mode.

This patch changes the design by using one M64 BAR in Single PE mode for
one VF BAR. This gives absolute isolation for VFs.
Signed-off-by: NWei Yang <weiyang@linux.vnet.ibm.com>
Reviewed-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Acked-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Currently, the OPAL msglog/console buffer is exposed as a sysfs file, with
the sysfs read handler responsible for retrieving the log from the OPAL
buffer. We'd like to be able to use it in xmon as well.

Refactor the OPAL msglog code to create a new function, opal_msglog_copy(),
that copies to an arbitrary buffer. Separate the initialisation code into
generic memcons init and sysfs file creation.
Signed-off-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This was wrongly updated by commit 7aa9a23c ("powerpc, thp: remove
infrastructure for handling splitting PMDs") during the last merge
window. Fix it up.

This could lead to incorrect behaviour in THP and/or mprotect(), at a
minimum.

Fixes: 7aa9a23c ("powerpc, thp: remove infrastructure for handling splitting PMDs")
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Commit d5d6a443 ("arch/powerpc/include/asm/pgtable-ppc64.h:
add pmd_[dirty|mkclean] for THP") added a new identical definition
of pmd_dirty(). Remove it again.

Cc: Minchan Kim <minchan@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Test runs on a ppc64 BE guest succeeded using modified fstests.

Also tested on ppc64 LE using a home made test - mpe.
Signed-off-by: NChandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Move the generic implementation to <linux/dma-mapping.h> now that all
architectures support it and remove the HAVE_DMA_ATTR Kconfig symbol now
that everyone supports them.

[valentinrothberg@gmail.com: remove leftovers in Kconfig]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Helge Deller <deller@gmx.de>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NValentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The four cpumasks cpu_{possible,online,present,active}_bits are exposed
readonly via the corresponding const variables cpu_xyz_mask.  But they are
also accessible for arbitrary writing via the exposed functions
set_cpu_xyz.  There's quite a bit of code throughout the kernel which
iterates over or otherwise accesses these bitmaps, and having the access
go via the cpu_xyz_mask variables is nowadays [1] simply a useless
indirection.

It may be that any problem in CS can be solved by an extra level of
indirection, but that doesn't mean every extra indirection solves a
problem.  In this case, it even necessitates some minor ugliness (see
4/6).

Patch 1/6 is new in v2, and fixes a build failure on ppc by renaming a
struct member, to avoid problems when the identifier cpu_online_mask
becomes a macro later in the series.  The next four patches eliminate the
cpu_xyz_mask variables by simply exposing the actual bitmaps, after
renaming them to discourage direct access - that still happens through
cpu_xyz_mask, which are now simply macros with the same type and value as
they used to have.

After that, there's no longer any reason to have the setter functions be
out-of-line: The boolean parameter is almost always a literal true or
false, so by making them static inlines they will usually compile to one
or two instructions.

For a defconfig build on x86_64, bloat-o-meter says we save ~3000 bytes.
We also save a little stack (stackdelta says 127 functions have a 16 byte
smaller stack frame, while two grow by that amount).  Mostly because, when
iterating over the mask, gcc typically loads the value of cpu_xyz_mask
into a callee-saved register and from there into %rdi before each
find_next_bit call - now it can just load the appropriate immediate
address into %rdi before each call.

[1] See Rusty's kind explanation
http://thread.gmane.org/gmane.linux.kernel/2047078/focus=2047722 for
some historic context.

This patch (of 6):

As preparation for eliminating the indirect access to the various global
cpu_*_bits bitmaps via the pointer variables cpu_*_mask, rename the
cpu_online_mask member of struct fadump_crash_info_header to simply
online_mask, thus allowing cpu_online_mask to become a macro.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: NMichael Ellerman <mpe@ellerman.id.au>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

To date, we have implemented two I/O usage models for persistent memory,
PMEM (a persistent "ram disk") and DAX (mmap persistent memory into
userspace).  This series adds a third, DAX-GUP, that allows DAX mappings
to be the target of direct-i/o.  It allows userspace to coordinate
DMA/RDMA from/to persistent memory.

The implementation leverages the ZONE_DEVICE mm-zone that went into
4.3-rc1 (also discussed at kernel summit) to flag pages that are owned
and dynamically mapped by a device driver.  The pmem driver, after
mapping a persistent memory range into the system memmap via
devm_memremap_pages(), arranges for DAX to distinguish pfn-only versus
page-backed pmem-pfns via flags in the new pfn_t type.

The DAX code, upon seeing a PFN_DEV+PFN_MAP flagged pfn, flags the
resulting pte(s) inserted into the process page tables with a new
_PAGE_DEVMAP flag.  Later, when get_user_pages() is walking ptes it keys
off _PAGE_DEVMAP to pin the device hosting the page range active.
Finally, get_page() and put_page() are modified to take references
against the device driver established page mapping.

Finally, this need for "struct page" for persistent memory requires
memory capacity to store the memmap array.  Given the memmap array for a
large pool of persistent may exhaust available DRAM introduce a
mechanism to allocate the memmap from persistent memory.  The new
"struct vmem_altmap *" parameter to devm_memremap_pages() enables
arch_add_memory() to use reserved pmem capacity rather than the page
allocator.

This patch (of 18):

The core has developed a need for a "pfn_t" type [1].  Move the existing
pfn_t in KVM to kvm_pfn_t [2].

[1]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002199.html
[2]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002218.htmlSigned-off-by: NDan Williams <dan.j.williams@intel.com>
Acked-by: NChristoffer Dall <christoffer.dall@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

MADV_FREE needs pmd_dirty and pmd_mkclean for detecting recent overwrite
of the contents since MADV_FREE syscall is called for THP page.

This patch adds pmd_dirty and pmd_mkclean for THP page MADV_FREE
support.
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Shaohua Li <shli@kernel.org>
Cc: <yalin.wang2010@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Gang <gang.chen.5i5j@gmail.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jason Evans <je@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mika Penttil <mika.penttila@nextfour.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rik van Riel <riel@redhat.com>
Cc: Roland Dreier <roland@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Shaohua Li <shli@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With new refcounting we don't need to mark PMDs splitting.  Let's drop
code to handle this.

pmdp_splitting_flush() is not needed too: on splitting PMD we will do
pmdp_clear_flush() + set_pte_at().  pmdp_clear_flush() will do IPI as
needed for fast_gup.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Tested-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>