Since the code is shared pretty much most of the pci= options are shared,
but kernel-parameters.txt marked most of them as i386 only.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This patch changes these two messages:

    pci 0000:00:03.0: supports D1
    pci 0000:00:03.0: supports D2

to this:

    pci 0000:00:03.0: supports D1 D2

It also trivially converts a "dev_printk(KERN_INFO, ...)" to
"dev_info(...)".
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Please run checkpatch prior to sending patches, this one fixes several style
issues with the list_for_each conversion patch.

Cc: Cordelia Sam <cordesam@gmail.com>
Cc: Cordelia Sam <cordsam@linux.vnet.ibm.com>
Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Make code more readable with list_for_each_entry().
Signed-off-by: NCordelia Sam <cordesam@gmail.com>
Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Use "[%04x:%04x]" for PCI vendor/device IDs to follow the format
used by lspci(8).
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Use "[%04x:%04x]" for PCI vendor/device IDs to follow the format
used by lspci(8).
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

We are using 28bit pci (bus/dev/fn + 12 bits) as irq number, so the
cache for irq number should be 32 bit too.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Many device drivers use the following sequence of statements to enable
the device to wake up the system while being in the D3_hot or D3_cold
low power state:

        pci_enable_wake(pdev, PCI_D3hot, 1);
        pci_enable_wake(pdev, PCI_D3cold, 1);

However, the second call is not necessary if the first one succeeds (the
ordering of the statements above doesn't matter here) and it may even be
harmful, because we are not supposed to enable PME# after the wake-up
power has been enabled for the device.

To allow drivers to overcome this problem, introduce function
pci_wake_from_d3() that will enable the device to wake up the system
from any of D3_hot and D3_cold as long as the wake-up from at least one
of them is supported.
Acked-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This patch adds the CONFIG_PCI_QUIRKS option which allows to remove all
the PCI quirks, which are not necessarily used on embedded systems when
PCI is working properly. As this is a size-reduction option, it depends
on CONFIG_EMBEDDED. It allows to save almost 12 kilobytes of kernel
code:

   text	   data	    bss	    dec	    hex	filename
1287806	 123596	 212992	1624394	 18c94a	vmlinux.old
1275854	 123596	 212992	1612442	 189a9a	vmlinux
 -11952       0       0  -11952   -2EB0 +/-

This patch has originally been written by Zwane Mwaikambo
<zwane@arm.linux.org.uk> and is part of the Linux Tiny project.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Only accept dynids whose driver_data value matches one of the driver's
pci_driver_id entries. This prevents the user from accidentally passing
values the drivers do not expect.

Cc: Milton Miller <miltonm@bga.com>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

The driver flag dynids.use_driver_data is almost consistently not set,
and causes more problems than it solves.  It was initially intended as a
flag to indicate whether a driver's usage of driver_data had been
carefully inspected and was ready for values from userspace.  That audit
was never done, so most drivers just get a 0 for driver_data when new
IDs are added from userspace via sysfs.  So remove the flag, allowing
drivers to see the data directly (a followon patch validates the passed
driver_data value against what the drivers expect).
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Acked-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

* git://git.infradead.org/battery-2.6:
  bq27x00_battery: use unaligned access helper
  power_supply: fix dependency of tosa_battery
  power_supply: Support for Texas Instruments BQ27200 battery managers
  power_supply: Add function to return system-wide power state
  pda_power: Check and handle return value of set_irq_wake

The EPCA can support indefinte break lengths and with info from digi that
can now be added
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: (26 commits)
  9p: add more conservative locking
  9p: fix oops in protocol stat parsing error path.
  9p: fix device file handling
  9p: Improve debug support
  9p: eliminate depricated conv functions
  9p: rework client code to use new protocol support functions
  9p: remove unnecessary tag field from p9_req_t structure
  9p: remove 9p fcall debug prints
  9p: add new protocol support code
  9p: encapsulate version function
  9p: move dirread to fs layer
  9p: adjust 9p vfs write operation
  9p: move readn meta-function from client to fs layer
  9p: consolidate read/write functions
  9p: drop broken unused error path from p9_conn_create()
  9p: make rpc code common and rework flush code
  9p: use the rcall structure passed in the request in trans_fd read_work
  9p: apply common request code to trans_fd
  9p: apply common tagpool handling to trans_fd
  9p: move request management to client code
  ...

* git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFS: use correct fs type for v4 submounts and referrals
  Make nfs_file_cred more robust.
  NFS: Enable NFSv4 callback server to listen on AF_INET6 sockets

* 'for-next' of git://git.o-hand.com/linux-mfd:
  mfd: further unbork the ucb1400 ac97_bus dependencies
  mfd: ucb1400 needs GPIO
  mfd: ucb1400 sound driver uses/depends on AC97_BUS:
  mfd: Don't use NO_IRQ in WM8350
  mfd: update TMIO drivers to use the clock API
  mfd: twl4030-core irq simplification
  mfd: add base support for Dialog DA9030/DA9034 PMICs
  mfd: TWL4030 core driver
  mfd: support tmiofb cell on tc6393xb
  mfd: add OHCI cell to tc6393xb
  mfd: Fix htc-egpio compile warning
  mfd: do tcb6393xb state restore on resume only if requested
  mfd: provide and use setup hook for tc6393xb
  mfd: update sm501 debugging/low information messages
  mfd: reduce stack usage in mfd-core.c

* 'linux-next' of git://git.infradead.org/ubifs-2.6: (25 commits)
  UBIFS: fix ubifs_compress commentary
  UBIFS: amend printk
  UBIFS: do not read unnecessary bytes when unpacking bits
  UBIFS: check buffer length when scanning for LPT nodes
  UBIFS: correct condition to eliminate unecessary assignment
  UBIFS: add more debugging messages for LPT
  UBIFS: fix bulk-read handling uptodate pages
  UBIFS: improve garbage collection
  UBIFS: allow for sync_fs when read-only
  UBIFS: commit on sync_fs
  UBIFS: correct comment for commit_on_unmount
  UBIFS: update dbg_dump_inode
  UBIFS: fix commentary
  UBIFS: fix races in bit-fields
  UBIFS: ensure data read beyond i_size is zeroed out correctly
  UBIFS: correct key comparison
  UBIFS: use bit-fields when possible
  UBIFS: check data CRC when in error state
  UBIFS: improve znode splitting rules
  UBIFS: add no_chk_data_crc mount option
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (112 commits)
  sh: Move SH-4 CPU headers down one more level.
  sh: Only build in gpio.o when CONFIG_GENERIC_GPIO is selected.
  sh: Migrate common board headers to mach-common/.
  sh: Move the CPU definition headers from asm/ to cpu/.
  serial: sh-sci: Add support SCIF of SH7723
  video: add sh_mobile_lcdc platform flags
  video: remove unused sh_mobile_lcdc platform data
  sh: remove consistent alloc cruft
  sh: add dynamic crash base address support
  sh: reduce Migo-R smc91x overruns
  sh: Fix up some merge damage.
  Fix debugfs_create_file's error checking method for arch/sh/mm/
  Fix debugfs_create_dir's error checking method for arch/sh/kernel/
  sh: ap325rxa: Add support RTC RX-8564LC in AP325RXA board
  sh: Use sh7720 GPIO on magicpanelr2 board
  sh: Add sh7720 pinmux code
  sh: Use sh7203 GPIO on rsk7203 board
  sh: Add sh7203 pinmux code
  sh: Use sh7723 GPIO on AP325RXA board
  sh: Add sh7723 pinmux code
  ...

This converts things in drivers/pci to use %pR to printout the
content of a struct resource instead of hand-casted %llx or
other variants.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a %pR option to the kernel vsnprintf that prints the range of
addresses inside a struct resource passed by pointer.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: ASoC: OMAP: Fix DSP DAI format in McBSP DAI driver
  go7007 - Add missing dependency on sound subsystem
  ALSA: ps3: Add support for SPDIF/HDMI passthru
  ps3: Add passthru support for non-audio streams
  ps3: Add ps3av_audio_mute_analog()
  ALSA: misc typo fixes
  sound: add missing pcm kernel-doc

sxghif.h has code that explicitly will not build fo other architecures.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  netfilter: replace old NF_ARP calls with NFPROTO_ARP
  netfilter: fix compilation error with NAT=n
  netfilter: xt_recent: use proc_create_data()
  netfilter: snmp nat leaks memory in case of failure
  netfilter: xt_iprange: fix range inversion match
  netfilter: netns: use NFPROTO_NUMPROTO instead of NUMPROTO for tables array
  netfilter: ctnetlink: remove obsolete NAT dependency from Kconfig
  pkt_sched: sch_generic: Fix oops in sch_teql
  dccp: Port redirection support for DCCP
  tcp: Fix IPv6 fallout from 'Port redirection support for TCP'
  netdev: change name dropping error codes
  ipvs: Update CONFIG_IP_VS_IPV6 description and help text

* git://git.infradead.org/mtd-2.6: (69 commits)
  Revert "[MTD] m25p80.c code cleanup"
  [MTD] [NAND] GPIO driver depends on ARM... for now.
  [MTD] [NAND] sh_flctl: fix compile error
  [MTD] [NOR] AT49BV6416 has swapped erase regions
  [MTD] [NAND] GPIO NAND flash driver
  [MTD] cmdlineparts documentation change - explain where mtd-id comes from
  [MTD] cfi_cmdset_0002.c: Add Macronix CFI V1.0 TopBottom detection
  [MTD] [NAND] Fix compilation warnings in drivers/mtd/nand/cs553x_nand.c
  [JFFS2] Write buffer offset adjustment for NOR-ECC (Sibley) flash
  [MTD] mtdoops: Fix a bug where block may not be erased
  [MTD] mtdoops: Add a magic number to logged kernel oops
  [MTD] mtdoops: Fix an off by one error
  [JFFS2] Correct parameter names of jffs2_compress() in comments
  [MTD] [NAND] sh_flctl: add support for Renesas SuperH FLCTL
  [MTD] [NAND] Bug on atmel_nand HW ECC : OOB info not correctly written
  [MTD] [MAPS] Remove unused variable after ROM API cleanup.
  [MTD] m25p80.c extended jedec support (v2)
  [MTD] remove unused mtd parameter in of_mtd_parse_partitions()
  [MTD] [NAND] remove dead Kconfig associated with !CONFIG_PPC_MERGE
  [MTD] [NAND] driver extension to support NAND on TQM85xx modules
  ...

Tejun's commit 7b595756 made sysfs
attribute->owner unnecessary.  But the field was left in the structure to
ease the merge.  It's been over a year since that change and it is now
time to start killing attribute->owner along with its users - one arch at
a time!

This patch is attempt #1 to get rid of attribute->owner only for
CONFIG_X86_64 or CONFIG_X86_32 .  We will deal with other arches later on
as and when possible - avr32 will be the next since that is something I
can test.  Compile (make allyesconfig / make allmodconfig / custom config)
and boot tested.

akpm: the idea is that we put the declaration of sttribute.owner inside
`#ifndef CONFIG_X86'.  But that proved to be too ambitious for now because
new usages kept on turning up in subsystem trees.

[akpm: remove the ifdef for now]
Signed-off-by: NParag Warudkar <parag.lkml@gmail.com>
Cc: Greg KH <greg@kroah.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Steven French <sfrench@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- the macros are gone
- there's no more code in this file,
  LGPL + GPL = GPL,
  and the code that was moved to lib/bcd.c is anyway trivial
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove the following obsolete macros:

- BCD2BIN
- BIN2BCD
- BCD_TO_BIN
- BIN_TO_BCD
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change sr_vendor.c to use the new bcd2bin function instead of the obsolete
BCD2BIN macro.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change i2c to use the new bcd2bin/bin2bcd functions instead of the
obsolete BCD2BIN/BIN2BCD macros.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change mn10300 to use the new bcd2bin/bin2bcd functions instead of the
obsolete BCD_TO_BIN/BIN_TO_BCD macros.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Changes mips to use the new bcd2bin/bin2bcd functions instead of the
obsolete BCD_TO_BIN/BIN_TO_BCD/BCD2BIN/BIN2BCD macros.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

These are going away.

Cc: Takashi Iwai <tiwai@suse.de>
Cc: Adrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change various rtc related code to use the new bcd2bin/bin2bcd functions
instead of the obsolete BCD_TO_BIN/BIN_TO_BCD/BCD2BIN/BIN2BCD macros.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change drivers/rtc/ to use the new bcd2bin/bin2bcd functions instead of
the obsolete BCD_TO_BIN/BIN_TO_BCD/BCD2BIN/BIN2BCD macros.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change cris to use the new bcd2bin/bin2bcd functions instead of the
obsolete BCD_TO_BIN/BIN_TO_BCD macros.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Cc: Chris Zankel <zankel@tensilica.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change alpha to use the new bcd2bin/bin2bcd functions instead of the
obsolete BCD_TO_BIN/BIN_TO_BCD macros.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change ACPI to use the new bcd2bin/bin2bcd functions instead of the
obsolete BCD_TO_BIN/BIN_TO_BCD macros.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch makes the needlessly global anon_vma_cachep static.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: NRik van Riel <riel@redhat.com>
Acked-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A consolidated implementation will provide this generically through
asm/byteorder, remove direct includes to avoid breakage when the
changeover to the new implementation occurs.
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Acked-by: NMauro Carvalho Chehab <mchehab@infradead.org>
Acked-by: N"Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>