The existing vm_area_register_early() allows for early vmalloc space
allocation.  However upcoming cleanups in the ARM architecture require
that some fixed locations in the vmalloc area be reserved also very early.

The name "vm_area_register_early" would have been a good name for the
reservation part without the allocation.  Since it is already in use with
different semantics, let's create vm_area_add_early() instead.

Both vm_area_register_early() and vm_area_add_early() can be used together
meaning that the former is now implemented using the later where it is
ensured that no conflicting areas are added, but no attempt is made to
make the allocation scheme in vm_area_register_early() more sophisticated.
After all, you must know what you're doing when using those functions.
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org

Some upcoming changes must know the VMALLOC_START value, which is based
on high_memory, before bootmem_init() is called.

The best location to set it is in sanity_check_meminfo() where the needed
computation is already done, and in the non MMU case it is trivial to do
now that the meminfo array is already sorted at that point.
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

The meminfo array has to be sorted before sanity_check_meminfo() in
arch/arm/mm/mmu.c is called for it to work properly.  This also allows
for a simpler find_limits() in arch/arm/mm/init.c.

The sort is moved to arch/arm/kernel/setup.c because that's where the
meminfo array is populated.  Eventually this should be improved upon
to make the memory bank parser a bit more robust against problems
such as overlapping memory ranges.
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

REALVIEW_EB11MP_GIC_CPU_BASE is not 4KB aligned which causes an
overlapping mapping. Use REALVIEW_EB11MP_SCU_BASE instead which is
aligned.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

REALVIEW_PBX_TILE_GIC_CPU_BASE is not 4KB aligned which causes an
overlapping mapping. Use REALVIEW_PBX_TILE_SCU_BASE instead which is
aligned.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

The map_desc for VERSATILE_GPIO0_BASE overlaps with VERSATILE_SCTL_BASE.
The overlapping entry can be removed.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

A generic version should replace this later.
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

A generic version should replace this later.
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Reviewed-by: NDeepak Saxena <dsaxena@linaro.org>

A generic version should replace this later.
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

A generic version should replace this later.
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

Using VMALLOC_END implies a presumption about the layout which is best
avoided, even if in practice this would not change much.
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

A generic version should replace this later.

As io.c has become nearly empty, omap_init_consistent_dma_size() is moved
into common.c so that io.c can be removed entirely.
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Tested-by: NKevin Hilman <khilman@ti.com>

A generic version should replace this later.
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Tested-by: NStephen Warren <swarren@nvidia.com>

A generic version should replace this later.
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

A generic version should replace this later.
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

... since it is going to change.
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Tested-by: NBarry Song <baohua.song@csr.com>

This include is unnecessary.
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>

* 'iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu: omap: Fix compile failure

* 'fixes' of git://git.linaro.org/people/triad/linux-pinctrl:
  pinctrl: hide subsystem from the populace
  pinctrl: fix "warning: 'struct pinctrl_dev' declared inside parameter list"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  fsl-rio: fix compile error

* 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6:
  gpio: pca953x: propagate the errno from the chip_init functions
  gpio: pca953x: remove unneeded check for chip type
  gpio/omap: check return value from irq_alloc_generic_chip
  gpio/omap: replace MOD_REG_BIT macro with static inline

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin:
  blackfin: Fixup export.h includes
  Blackfin: add serial TX IRQ in individual platform resource

On a corrupted file system the ->len field could be wrong leading to
a buffer overflow.
Reported-and-acked-by: NClement LECIGNE <clement.lecigne@netasq.com>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The "#include <linux/module.h>" was replaced by "#include <linux/export.h>"
in the patch "powerpc: various straight conversions from module.h --> export.h".
This will cause the following compile problem:
arch/powerpc/sysdev/fsl_rio.c: In function 'fsl_rio_mcheck_exception':
arch/powerpc/sysdev/fsl_rio.c:296: error: implicit declaration of function 'search_exception_tables'.

The file fsl_rio.c needs the declaration of function "search_exception_tables"
in the header file "linux/module.h".
Signed-off-by: NLiu Gang <Gang.Liu@freescale.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Commit 8dc7a9c8 ("blackfin: Add export.h to files using
EXPORT_SYMBOL/THIS_MODULE") inserted some of the include statements into
sections protected by an unrelated #if CONFIG_... statement. This can cause,
depending on the configuration used, warnings like this one:

	arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: data definition has no type or storage class
	arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: type defaults to ‘int’ in declaration of ‘EXPORT_SYMBOL’
	arch/blackfin/mach-bf537/boards/stamp.c:2940: warning: parameter names (without types) in function declaration

This patch fixes it by moving the includes out of the #if protected sections.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Acked-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

The serial TX IRQ is not simply (RX IRQ + 1) on some Blackfin chips,
so move the values to the platform resources.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NBob Liu <lliubbo@gmail.com>

* 'rmobile-fixes-for-linus' of git://github.com/pmundt/linux-sh:
  ARM: mach-shmobile: cpuidle single/global and last_state fixes
  ARM: mach-shmobile: move helper macro PORTCR to sh_pfc.h
  ARM: mach-shmobile: move helper macro PORT_xx to sh_pfc.h
  ARM: mach-shmobile: move helper macro PORT_DATA_xx to sh_pfc.h
  ARM: mach-shmobile: ap4evb: remove white space from end of line
  ARM: mach-shmobile: clock-sh7372: remove un-necessary index
  ARM: mach-shmobile: kota2: add comment out separator
  ARM: mach-shmobile: sh73a0: add MMC data pin pull-up

* 'sh-fixes-for-linus' of git://github.com/pmundt/linux-sh:
  mailmap: Fix up some renesas attributions
  sh: clkfwk: Kill off remaining debugfs cruft.
  drivers: sh: Kill off dead pathname for runtime PM stub.
  drivers: sh: Generalize runtime PM platform stub.
  sh: Wire up process_vm syscalls.
  sh: clkfwk: add clk_rate_mult_range_round()
  serial: sh-sci: Fix up SH-2A SCIF support.
  sh: Fix cached/uncaced address calculation in 29bit mode

* git://github.com/rustyrussell/linux:
  virtio-pci: fix use after free

Commit 31a3ddda introduced
a use after free in virtio-pci. The main issue is
that the release method signals removal of the virtio device,
while remove signals removal of the pci device.

For example, on driver removal or hot-unplug,
virtio_pci_release_dev is called before virtio_pci_remove.
We then might get a crash as virtio_pci_remove tries to use the
device freed by virtio_pci_release_dev.

We allocate/free all resources together with the
pci device, so we can leave the release method empty.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon/kms/combios: fix dynamic allocation of PM clock modes

After commit e978aa7d ("cpuidle: Move dev->last_residency update to
driver enter routine; remove dev->last_state") setting acpi_idle_suspend
to 1 by acpi_processor_suspend() causes the ACPI cpuidle routines to
return error codes continuously, which in turn causes cpuidle to lock up
(hard).

However, acpi_idle_suspend doesn't appear to be useful for any
particular purpose (it's racy and doesn't really provide any real
protection), so it can be removed, which makes the problem go away.
Reported-and-tested-by: NTomas M. <tmezzadra@gmail.com>
Reported-and-tested-by: NFerenc Wagner <wferi@niif.hu>
Tested-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I missed the combios path when I updated the atombios pm code.

Reported by amarsh04 on IRC.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm/imx: fix imx6q mmc error when mounting rootfs
  arm/imx: fix AUTO_ZRELADDR selection
  arm/imx: fix the references to ARCH_MX3
  ARM: mx51/53: set pwm clock parent to ipg_perclk
  arm/tegra: enable headphone detection gpio on seaboard
  arm/dt: Fix ventana SDHCI power-gpios
  arm/tegra: Don't create duplicate gpio and pinmux devices
  ARM: at91: Fix USBA gadget registration
  atmel/spi: fix missing probe
  at91/yl-9200: Fix section mismatch
  at91: vmalloc fix missing AT91_VIRT_BASE define
  ARM: at91: usart: drop static map regs for dbgu
  ARM: picoxcell: add extra temp register to addruart
  ARM: msm: fix compilation flags for MSM_SCM
  arm/mxs: fix mmc device adding for mach-mx28evk
  ARM: mxc: Remove test_for_ltirq
  ARM:i.MX: fix build error in clock-mx51-mx53.c
  ARM:i.MX: fix build error in tzic/avic.c
  ARM: mxc: fix local timer interrupt handling
  msm: boards: Fix fallout from removal of machine_desc in fixup

The variable i is removed by commit ded84337
"[CPUFREQ] db8500: remove unneeded for loop iteration over freq_table",
but current code to print available frequencies still uses the i variable.
Thus add the i variable back to fix below buld error:

  CC      drivers/cpufreq/db8500-cpufreq.o
drivers/cpufreq/db8500-cpufreq.c: In function 'db8500_cpufreq_init':
drivers/cpufreq/db8500-cpufreq.c:123: error: 'i' undeclared (first use in this function)
drivers/cpufreq/db8500-cpufreq.c:123: error: (Each undeclared identifier is reported only once
drivers/cpufreq/db8500-cpufreq.c:123: error: for each function it appears in.)
make[2]: *** [drivers/cpufreq/db8500-cpufreq.o] Error 1
make[1]: *** [drivers/cpufreq] Error 2
make: *** [drivers] Error 2

This patch also fixes using uninitialized i variable as array index.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDave Jones <davej@redhat.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (29 commits)
  m68k/mac: Remove mac_irq_{en,dis}able() wrappers
  m68k/irq: Remove obsolete support for user vector interrupt fixups
  m68k/irq: Remove obsolete m68k irq framework
  m68k/q40: Convert Q40/Q60 to genirq
  m68k/sun3: Convert Sun3/3x to genirq
  m68k/sun3: Use the kstat_irqs_cpu() wrapper
  m68k/apollo: Convert Apollo to genirq
  m68k/vme: Convert VME to genirq
  m68k/hp300: Convert HP9000/300 and HP9000/400 to genirq
  m68k/mac: Optimize interrupts using chain handlers
  m68k/mac: Convert Mac to genirq
  m68k/amiga: Optimize interrupts using chain handlers
  m68k/amiga: Convert Amiga to genirq
  m68k/amiga: Refactor amiints.c
  m68k/atari: Remove code and comments about different irq types
  m68k/atari: Convert Atari to genirq
  m68k/irq: Add genirq support
  m68k/irq: Remove obsolete IRQ_FLG_* users
  m68k/irq: Rename {,__}m68k_handle_int()
  m68k/irq: Add m68k_setup_irq_controller()
  ...

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] v4l2-ctrl: Send change events to all fh for auto cluster slave controls
  [media] v4l2-event: Don't set sev->fh to NULL on unsubscribe
  [media] v4l2-event: Remove pending events from fh event queue when unsubscribing
  [media] v4l2-event: Deny subscribing with a type of V4L2_EVENT_ALL
  [media] MAINTAINERS: add a maintainer for s5p-mfc driver
  [media] v4l: s5p-mfc: fix reported capabilities
  [media] media: vb2: reset queued list on REQBUFS(0) call
  [media] media: vb2: set buffer length correctly for all buffer types
  [media] media: vb2: add a check for uninitialized buffer
  [media] mxl111sf: fix build warning
  [media] mxl111sf: remove pointless if condition in mxl111sf_config_spi
  [media] mxl111sf: check for errors after mxl111sf_write_reg in mxl111sf_idac_config
  [media] mxl111sf: fix return value of mxl111sf_idac_config
  [media] uvcvideo: GET_RES should only be checked for BITMAP type menu controls

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/kvm: Fix build failure with HV KVM and CBE
  powerpc/ps3: Fix lv1_gpu_attribute hcall
  powerpc/ps3: Fix PS3 repository build warnings
  powerpc/ps3: irq: Remove IRQF_DISABLED
  powerpc/irq: Remove IRQF_DISABLED
  powerpc/numa: NUMA topology support for PowerNV
  powerpc: Add System RAM to /proc/iomem
  powerpc: Add KVM as module to defconfigs
  powerpc/kvm: Fix build with older toolchains
  powerpc, tqm5200: update tqm5200_defconfig to fit for charon board.
  powerpc/5200: add support for charon board