- 08 4月, 2015 2 次提交
-
-
由 Azael Avalos 提交于
This patch fixes the messages displayed by the USB Sleep Functions, they were printing wrong messages not associated to the feature currently queried. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Azael Avalos 提交于
This patch fixes the USB Sleep and Charge mode on certain models where the value returned by the BIOS is different, and thus, making this feature not to work for those models. Also, the "Typical" charging mode was added as a supported mode. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
- 26 3月, 2015 3 次提交
-
-
由 Azael Avalos 提交于
Some Toshiba laptops with the "Special Functions" feature enabled fail to properly enable such feature unless a specific value is used to enable the hotkey events. This patch adds a new function called "*_enable_special_functions", that simply makes a call to the HCI_HOTKEY_EVENT call, but this time we are using a different parameter to make the "Special Functions" mode work as expected. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Azael Avalos 提交于
With the previous patch adding support to "Hotkey Event Type", we can now use the type to distinguish which keymap to use. This patch changes the toshiba_acpi_setup_keyboard function to make use of the hotkey event type to choose the correct keymap without the need to use the DMI matching list. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Azael Avalos 提交于
This patch adds support to query the "Hotkey Event Type" the system supports. There are two main event types (so far), 0x10 and 0x11, with the first being all those laptops that have the old keyboard layout, and the latter all those new laptops with the new keyboard layout. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
- 15 3月, 2015 1 次提交
-
-
由 Azael Avalos 提交于
This patch adds a few more events sent to TOSXXXX devices, some of them are already identified, while some others simply print a message informing the type of event received. Also, a netlink event is generated so that userspace apps, daemons, etc. act accordingly to these events. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
- 12 2月, 2015 12 次提交
-
-
由 Darren Hart 提交于
Remove the Free Software Foundation street address paragraph and reference COPYING. Remove an empty TODO block. Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Darren Hart 提交于
Ensure multiline comments start with /* and */ each on its own line. Capitalize the first word of comments. Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Azael Avalos 提交于
This patch makes use of the DEVICE_ATTR_{RO, RW} macros to simplify sysfs attributes declarations. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Azael Avalos 提交于
This patch removes the toshiba_ prefix from all the sysfs function names and adapted the code according to coding style. Also a few functions were renamed to match the sysfs entry, as this patch is a preparation for the next patch to switch to DEVICE_ATTR_{RO, RW, WO} macros. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Azael Avalos 提交于
Commit 93f8c16d ("toshiba_acpi: Support new keyboard backlight type") moved all the sysfs structs and function declarations further up in order to make use of sysfs_update_group, however, commit 80546905 ("toshiba_acpi: Add keyboard backlight mode change event") made use of that function unnecesary. This patch moves all the sysfs structs and function declarations further down, making the file shorther in lines and more readable. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Azael Avalos 提交于
This patch simply cleans the the driver out of 2 errors and 17 warnings according to "checkpatch -f", no functionality was changed, simply a cleanup. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Azael Avalos 提交于
Several new features were added on previous patches, so lets bump up the driver version. And also, update the copyright year. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Azael Avalos 提交于
Toshiba laptops that come with USB 3 ports have a feature that lets them disable USB 3 functionality and act as a regular USB 2 port, and thus, saving power. This patch adds support to that feature, by creating a sysfs entry named "usb_three", acceptig only two parameters, 0 to disable the USB 3 (acting as a USB 2) and 1 to enable it, however, a reboot is needed everytime this is toggled. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Azael Avalos 提交于
Toshiba laptops come with a feature called "Panel Open - Power ON", which makes the laptop turn on whenever the LID is opened. This patch adds support for such feature, by creating a sysfs entry named "panel_power_on", accepting only two values, 0 to disable and 1 to enable such feature, however, a reboot is needed on every mode change. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Azael Avalos 提交于
Recent Toshiba laptops that come with the new keyboard layout have the Special Functions (hotkeys) enabled by default, which, in order to access the F{1-12} keys, you need to press the FN-F{1-12} key to access such key. This patch adds support to toggle the Keyboard Functions operation mode by creating the sysfs entry "kbd_functions_keys", accepting only two parameters, 0 to set the "Normal Operation" mode and 1 to set the "Special Functions" mode, however, everytime the mode is toggled, a restart is needed. In the "Normal Operation" mode, the F{1-12} keys are as usual and the hotkeys are accessed via FN-F{1-12}. In the "Special Functions" mode, the F{1-12} keys trigger the hotkey and the F{1-12} keys are accessed via FN-F{1-12}. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Azael Avalos 提交于
This patch adds a fan entry to sysfs, enabling the user to get and set the fan status. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Azael Avalos 提交于
This patch adds a new entry to the sysfs, showing the version of the driver. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
- 10 2月, 2015 1 次提交
-
-
由 Azael Avalos 提交于
Some Toshiba laptops do not come with the ECO led installed, however, the driver is registering support for it when it should not. This patch makes the toshiba_eco_mode_available function more robust in detecting ECO led capabilities, not registering the led on laptops that do not support it and registering the led when it really does. The ECO led function now returns 0x8e00 (Not Installed) by querying with in[3] = 0, whenever theres no physical LED installed, and returning 0x8300 (Input Data Error) when it is, however, there are some BIOSes that have stub function calls not returning anything and and the LED device was being registered too, hence the change of the default return value from 1 to 0. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Minor comment update, fixed a whitespace error, s/truly/actual/. Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
- 29 1月, 2015 1 次提交
-
-
由 Azael Avalos 提交于
This was "toshiba_acpi: Change sci_open function return value" Some Toshiba laptops have "poorly implemented" SCI calls on their BIOSes and are not checking for sci_{open, close} calls, therefore, the sci_open function is failing and making some of the supported features unavailable (kbd backlight, touchpad, illumination, etc.). This patch checks whether we receive TOS_NOT_SUPPORTED and returns 1, making the supported features work on such laptops. In the case that some laptops really do not support the SCI, all the SCI dependent functions check for TOS_NOT_SUPPORTED, and thus, not registering support for the queried feature. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
- 24 1月, 2015 4 次提交
-
-
由 Azael Avalos 提交于
Newer Toshiba laptops now come with a feature called USB Sleep and Music, where the laptop speakers remain powered and the line-in jack is used to connect an external device to use the laptop speakers when the computer is asleep or turned off. This patchs adds support to such feature, by creating a sysfs entry named "usb_sleep_music", accepting only two values, 0 to disable and 1 to enable. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Azael Avalos 提交于
Newer Toshiba laptops equipped with USB 3.0 ports now have the functionality of rapid charging devices connected to their USB hubs. This patch adds support to use such feature by creating a sysfs entry named "usb_rapid_charge", accepting only two values, 0 to disable and 1 to enable, however, the machine needs a restart everytime the function is toggled. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Azael Avalos 提交于
Toshiba laptops supporting USB Sleep and Charge also come with a feature called "USB functions under battery", which what it does when enabled, is allows the USB Sleep functions when the computer is under battery power. This patch adds support to that function, creating a sysfs entry named "sleep_functions_on_battery", accepting values from 0-100, where zero disables the function and 1-100 sets the battery level at which point the USB Sleep functions will be disabled, and printing the current state of the functon and also the battery level currently set. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Azael Avalos 提交于
Newer Toshiba models now come with a feature called Sleep and Charge, where the computer USB ports remain powered when the computer is asleep or turned off. This patch adds support to such feature, creating a sysfs entry called "usb_sleep_charge" to set the desired charging mode or to disable it. The sysfs entry accepts three parameters, 0, 1 and 2, beign disabled, alternate and auto respectively. The auto mode stands for USB conformant devices (which most are), and the alternate mode stands for those non USB conformant devices that require more power. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
- 04 12月, 2014 6 次提交
-
-
由 Azael Avalos 提交于
A previous patch added support to handle more events. This patch adds support to update the sysfs group whenever we receive a 0x92 event, which indicates a change in the keyboard backlight mode, removing the update group code from toshiba_kbd_bl_mode_store, as it is no longer needed there. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Azael Avalos 提交于
Currently the function toshiba_acpi_notify only takes care of hotkeys, however, the TOSXXXX devices receive more events that can be useful. This patch changes the function to be able to handle more events, and in the process, move all hotkey related code residing in it to a new function called toshiba_acpi_process_hotkeys. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Azael Avalos 提交于
The hotkey enabling code is being used by *_setup_keyboard and also by *_resume. This patch creates a new function called toshiba_acpi_enable_hotkeys to be used by these two functions to avoid duplicating code. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Ondrej Zary 提交于
toshiba-acpi was always missing TOS6207 ID so it did not load automatically on some laptops (such as Portege R100). But it worked fine if loaded manually. Commit 135740de ("toshiba_acpi: Convert to use acpi_driver") broke that and the driver does not work even when loaded manually since then. Add TOS6207 ID to fix it. Tested on Toshiba Portege R100. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Markus Elfring 提交于
The backlight_device_unregister() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> For msi-wmi.c: Acked-by: NAnisse Astier <anisse@astier.eu> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Azael Avalos 提交于
Bug 86521 uncovered that some TOS6208 devices also return non zero values on a write call to the backlight method, thus getting caught and bailed out by the extra check code. This patch changes the set_lcd_brightness function to its "original" state by just adapting it to the new function format. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
- 20 11月, 2014 1 次提交
-
-
由 Giedrius Statkevičius 提交于
Instead of using a magic constant 0x20 in some drivers to get data only from the KBC port we should use the constant defined in i8042.h with the same value. Also, this makes these drivers uniform with what constant the only other filter function uses in drivers/input/misc/ideapad_slidebar.c. Signed-off-by: NGiedrius Statkevičius <giedriuswork@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
- 28 10月, 2014 1 次提交
-
-
由 Aaron Lu 提交于
As bug #72551, the Toshiba TECRA A50-A series models also come with the new keymap layout as found out by Azael Avalos, so add it to the dmi table. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=76971Reported-and-tested-by: NBlindekinder <rafael.raccuia@blindekinder.com> Cc: Azael Avalos <coproscefalo@gmail.com> Signed-off-by: NAaron Lu <aaron.lu@intel.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
- 07 10月, 2014 1 次提交
-
-
由 Azael Avalos 提交于
With the introduction of the new keyboard backlight implementation, the *_timeout_store function is broken, as it only supports the first kbd_type. This patch adapts such function for the new kbd_type, as well as converts from using sscanf to kstrtoint. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
- 01 10月, 2014 3 次提交
-
-
由 Azael Avalos 提交于
Currently the HCI/SCI read/write functions are returning the status of the ACPI call and also assigning the returned value of the HCI/SCI function, however, only the HCI/SCI status is being checked. This patch changes such functions, returning the value of the HCI/SCI function instead of the ACPI call status, eliminating one parameter, and returning something useful that indeed is being checked. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Azael Avalos 提交于
The return codes are split in between HCI/SCI prefixes, but they are shared (used) by both interfaces, mixing hci_read/write calls with SCI_* return codes, and sci_read/write calls with HCI_* ones. This patch changes the prefix of the return codes definitions, dropping the HCI/SCI naming and instead replacing it with TOS (for TOShiba). Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Azael Avalos 提交于
The function name hci_raw was used before to reflect a raw (read/write) call to Toshiba's Hardware Configuration Interface (HCI), however, since the introduction of the System Configuration Interface (SCI), that "name" no longer applies. This patch changes the name of that function to tci_raw (for Toshiba Configuration Interface), and change the comments about it. Also, the HCI_WORDS definition was changed to TCI_RAW, to better reflect that we're no longer using pure HCI calls, but a combination of HCI and SCI, which form part of the Toshiba Configuration Interface. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
- 18 9月, 2014 4 次提交
-
-
由 Azael Avalos 提交于
Newer Toshiba models now come with a new (and different) keyboard backlight implementation with three modes of operation: TIMER, ON and OFF, and the LED is now controlled internally by the firmware. This patch adds support for that type of backlight, changing the existing code to accomodate the new implementation. The timeout value range is now 1-60 seconds, and the accepted modes are now: 1 (FN-Z), 2 (AUTO or TIMER), 8 (ON) and 10 (OFF), this adds two new entries kbd_type and available_kbd_modes, the first shows the keyboard type and the latter shows the supported modes depending on the keyboard type. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Azael Avalos 提交于
The function toshiba_touchpad_store is not checking for invalid values and simply returns silently. This patch checks for invalid values and returns accordingly. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Azael Avalos 提交于
Some Toshiba models with illumination support set a different value on the returned codes, thus not allowing the illumination LED to be registered, where it should be. This patch removes a check from toshiba_illumination_available function to allow such models to register the illumination LED. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Azael Avalos 提交于
Appart from reporting hotkeys, the INFO method is used as a system wide event notifier for hardware or software changes. This patch adds additional "events" to the keymap list, ignored by now, until we find them a good use. Signed-off-by: NAzael Avalos <coproscefalo@gmail.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-