- Clarify that this config controls thermal throttling
reporting too
- Clarify the types of errors reported by machine checks
- Drop references to ancient CPUs.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Add a missing depency for ANCIENT_MCE. It didn't matter
in practice because the ANCIENT code wasn't compiled without
X86_MCE, but it's better to express that clearly in
Kconfig.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Use tab.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Allow user programs to write mce records into /dev/mcelog. When they do
that a fake machine check is triggered to test the machine check code.

This uses the MCE MSR wrappers added earlier.

The implementation is straight forward. There is a struct mce record
per CPU and the MCE MSR accesses get data from there if there is valid
data injected there. This allows to test the machine check code
relatively realistically because only the lowest layer of hardware
access is intercepted.

The test suite and injector are available at
git://git.kernel.org/pub/scm/utils/cpu/mce/mce-test.git
git://git.kernel.org/pub/scm/utils/cpu/mce/mce-inject.gitSigned-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

That's very easy using the infrastructure enabled earlier for MCE_INTEL

Untested.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Enable the 64bit MCE_INTEL code (CMCI, thermal interrupts) for 32bit NEW_MCE.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

The 64bit machine check code is in many ways much better than
the 32bit machine check code: it is more specification compliant,
is cleaner, only has a single code base versus one per CPU,
has better infrastructure for recovery, has a cleaner way to communicate
with user space etc. etc.

Use the 64bit code for 32bit too.

This is the second attempt to do this. There was one a couple of years
ago to unify this code for 32bit and 64bit.  Back then this ran into some
trouble with K7s and was reverted.

I believe this time the K7 problems (and some others) are addressed.
I went over the old handlers and was very careful to retain
all quirks.

But of course this needs a lot of testing on old systems. On newer
64bit capable systems I don't expect much problems because they have been
already tested with the 64bit kernel.

I made this a CONFIG for now that still allows to select the old
machine check code. This is mostly to make testing easier,
if someone runs into a problem we can ask them to try
with the CONFIG switched.

The new code is default y for more coverage.

Once there is confidence the 64bit code works well on older hardware
too the CONFIG_X86_OLD_MCE and the associated code can be easily
removed.

This causes a behaviour change for 32bit installations. They now
have to install the mcelog package to be able to log
corrected machine checks.

The 64bit machine check code only handles CPUs which support the
standard Intel machine check architecture described in the IA32 SDM.
The 32bit code has special support for some older CPUs which
have non standard machine check architectures, in particular
WinChip C3 and Intel P5.  I made those a separate CONFIG option
and kept them for now. The WinChip variant could be probably
removed without too much pain, it doesn't really do anything
interesting. P5 is also disabled by default (like it
was before) because many motherboards have it miswired, but
according to Alan Cox a few embedded setups use that one.

Forward ported/heavily changed version of old patch, original patch
included review/fixes from Thomas Gleixner, Bert Wesarg.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Xiaohui Xin and some other folks at Intel have been looking into what's
behind the performance hit of paravirt_ops when running native.

It appears that the hit is entirely due to the paravirtualized
spinlocks introduced by:

 | commit 8efcbab6
 | Date:   Mon Jul 7 12:07:51 2008 -0700
 |
 |     paravirt: introduce a "lock-byte" spinlock implementation

The extra call/return in the spinlock path is somehow
causing an increase in the cycles/instruction of somewhere around 2-7%
(seems to vary quite a lot from test to test).  The working theory is
that the CPU's pipeline is getting upset about the
call->call->locked-op->return->return, and seems to be failing to
speculate (though I haven't seen anything definitive about the precise
reasons).  This doesn't entirely make sense, because the performance
hit is also visible on unlock and other operations which don't involve
locked instructions.  But spinlock operations clearly swamp all the
other pvops operations, even though I can't imagine that they're
nearly as common (there's only a .05% increase in instructions
executed).

If I disable just the pv-spinlock calls, my tests show that pvops is
identical to non-pvops performance on native (my measurements show that
it is actually about .1% faster, but Xiaohui shows a .05% slowdown).

Summary of results, averaging 10 runs of the "mmperf" test, using a
no-pvops build as baseline:

		nopv		Pv-nospin	Pv-spin
CPU cycles	100.00%		99.89%		102.18%
instructions	100.00%		100.10%		100.15%
CPI		100.00%		99.79%		102.03%
cache ref	100.00%		100.84%		100.28%
cache miss	100.00%		90.47%		88.56%
cache miss rate	100.00%		89.72%		88.31%
branches	100.00%		99.93%		100.04%
branch miss	100.00%		103.66%		107.72%
branch miss rt	100.00%		103.73%		107.67%
wallclock	100.00%		99.90%		102.20%

The clear effect here is that the 2% increase in CPI is
directly reflected in the final wallclock time.

(The other interesting effect is that the more ops are
out of line calls via pvops, the lower the cache access
and miss rates.  Not too surprising, but it suggests that
the non-pvops kernel is over-inlined.  On the flipside,
the branch misses go up correspondingly...)

So, what's the fix?

Paravirt patching turns all the pvops calls into direct calls, so
_spin_lock etc do end up having direct calls.  For example, the compiler
generated code for paravirtualized _spin_lock is:

<_spin_lock+0>:		mov    %gs:0xb4c8,%rax
<_spin_lock+9>:		incl   0xffffffffffffe044(%rax)
<_spin_lock+15>:	callq  *0xffffffff805a5b30
<_spin_lock+22>:	retq

The indirect call will get patched to:
<_spin_lock+0>:		mov    %gs:0xb4c8,%rax
<_spin_lock+9>:		incl   0xffffffffffffe044(%rax)
<_spin_lock+15>:	callq <__ticket_spin_lock>
<_spin_lock+20>:	nop; nop		/* or whatever 2-byte nop */
<_spin_lock+22>:	retq

One possibility is to inline _spin_lock, etc, when building an
optimised kernel (ie, when there's no spinlock/preempt
instrumentation/debugging enabled).  That will remove the outer
call/return pair, returning the instruction stream to a single
call/return, which will presumably execute the same as the non-pvops
case.  The downsides arel 1) it will replicate the
preempt_disable/enable code at eack lock/unlock callsite; this code is
fairly small, but not nothing; and 2) the spinlock definitions are
already a very heavily tangled mass of #ifdefs and other preprocessor
magic, and making any changes will be non-trivial.

The other obvious answer is to disable pv-spinlocks.  Making them a
separate config option is fairly easy, and it would be trivial to
enable them only when Xen is enabled (as the only non-default user).
But it doesn't really address the common case of a distro build which
is going to have Xen support enabled, and leaves the open question of
whether the native performance cost of pv-spinlocks is worth the
performance improvement on a loaded Xen system (10% saving of overall
system CPU when guests block rather than spin).  Still it is a
reasonable short-term workaround.

[ Impact: fix pvops performance regression when running native ]
Analysed-by: N"Xin Xiaohui" <xiaohui.xin@intel.com>
Analysed-by: N"Li Xin" <xin.li@intel.com>
Analysed-by: N"Nakajima Jun" <jun.nakajima@intel.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Xen-devel <xen-devel@lists.xensource.com>
LKML-Reference: <4A0B62F7.5030802@goop.org>
[ fixed the help text ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Remove the EXPERIMENTAL tag from CONFIG_RELOCATABLE and make it the
default.  Relocatable kernels have been used for a while now, and
should now have identical semantics to non-relocatable kernels when
loaded by a non-relocating bootloader.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Default CONFIG_PHYSICAL_START and CONFIG_PHYSICAL_ALIGN each to 16 MB,
so that both non-relocatable and relocatable kernels are loaded at
16 MB by a non-relocating bootloader.  This is somewhat hacky, but it
appears to be the only way to do this that does not break some some
set of existing bootloaders.

We want to avoid the bottom 16 MB because of large page breakup,
memory holes, and ZONE_DMA.  Embedded systems may need to reduce this,
or update their bootloaders to be aware of the new min_alignment field.

[ Impact: performance improvement, avoids problems on some systems ]
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

We only need to build relocations when we are building a 32-bit
relocatable kernel.  Rather than unnecessarily complicating the
Makefiles, make an explicit Kbuild symbol for this.

[ Impact: permits future cleanup ]
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Cc: Sam Ravnborg <sam@ravnborg.org>

move_irq_desc() will try to move irq_desc to the home node if
the allocated one is not correct, in create_irq_nr().

( This can happen on devices that are on different nodes that
  are using MSI, when drivers are loaded and unloaded randomly. )

v2: fix non-smp build
v3: add NUMA_IRQ_DESC to eliminate #ifdefs

[ Impact: improve irq descriptor locality on NUMA systems ]
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <49F95EAE.2050903@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The original feature of migrating irq_desc dynamic was too fragile
and was causing problems: it caused crashes on systems with lots of
cards with MSI-X when user-space irq-balancer was enabled.

We now have new patches that create irq_desc according to device
numa node. This patch removes the leftover bits of the dynamic balancer.

[ Impact: remove dead code ]
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <49F654AF.8000808@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Look at the:

	diff -u arch/x86/boot/compressed/vmlinux_*.lds

output and realize that they're basially exactly the same except for
trivial naming differences, and the fact that the 64-bit version has a
"pgtable" thing.

So unify them.

There's some trivial cleanup there (make the output format a Kconfig thing
rather than doing #ifdef's for it, and unify both 32-bit and 64-bit BSS
end to "_ebss", where 32-bit used to use the traditional "_end"), but
other than that it's really very mindless and straigt conversion.

For example, I think we should aim to remove "startup_32" vs "startup_64",
and just call it "startup", and get rid of one more difference. I didn't
do that.

Also, notice the comment in the unified vmlinux.lds.S talks about
"head_64" and "startup_32" which is an odd and incorrect mix, but that was
actually what the old 64-bit only lds file had, so the confusion isn't
new, and now that mixing is arguably more accurate thanks to the
vmlinux.lds.S file being shared between the two cases ;)

[ Impact: cleanup, unification ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

$ cat x86-more-than-8-cpus-requires-bigsmp.patch

Enforce NR_CPUS <= 8 limitation if X86_BIGSMP not set

Configuring more than 8 logical CPUs on 32-bit x86 requires
X86_BIGSMP to be set in order to boot successfully, if more than 8
logical CPUs are actually found at boot time.  The X86_BIGSMP help
text describes that it is required to be set if more than 8 CPUs
are configured, but this was previously not enforced.

This configuration error has affected multiple distributions:
    https://bugzilla.redhat.com/show_bug.cgi?id=480844
    https://issues.rpath.com/browse/RPL-3022Signed-off-by: NMichael K Johnson <johnsonm@rpath.com>
LKML-Reference: <20090422014448.GB32541@logo.rdu.rpath.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Instead of selecting X86_X2APIC, make config X86_UV dependent
on X86_X2APIC.

This will eliminate enabling CONFIG_X86_X2APIC with out
enabling CONFIG_INTR_REMAP.

[ Impact: cleanup ]
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Acked-by: NJack Steiner <steiner@sgi.com>
Cc: dwmw2@infradead.org
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Weidong Han <weidong.han@intel.com>
LKML-Reference: <20090420200450.694598000@linux-os.sc.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

It causes crash on system with lots of cards with MSI-X
when irq_balancer enabled...

The patches fixing it were both complex and fragile, according
to Eric they were also doing quite dangerous things to the
hardware.

Instead we now have patches that solve this problem via static
NUMA node mappings - not dynamic allocation and balancing.

The patches are much simpler than this method but are still too
large outside of the merge window, so we mark the dynamic balancer
as broken for now, and queue up the new approach for v2.6.31.

[ Impact: deactivate broken kernel feature ]
Reported-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <49E68C41.4020801@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: build fix

Add Kconfig dependency on NUMA for enabling UV. Although it might
be possible to configure non-NUMA UV systems, they are unsupported
and not interesting. Much of the infrastructure for UV requires
NUMA support.
Signed-off-by: NJack Steiner <steiner@sgi.com>
LKML-Reference: <20090403203942.GA20137@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This build failure:

| drivers/pci/dmar.c:47: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘dmar_tbl_size’
| drivers/pci/dmar.c:62: warning: ‘struct acpi_dmar_device_scope’ declared inside parameter list
| drivers/pci/dmar.c:62: warning: its scope is only this definition or declaration, which is probably not what you want

Triggers due to this commit:

  d0b03bd1: x2apic/intr-remap: decouple interrupt remapping from x2apic

Which exposed a pre-existing but dormant fragility of the 'select X86_X2APIC'
it moved around and turned that fragility into a build failure.

Replace it with a proper 'depends on' construct.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
LKML-Reference: <1239084280.22733.404.camel@macbook.infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

interrupt remapping must be enabled before enabling x2apic, but
interrupt remapping doesn't depend on x2apic, it can be used
separately. Enable interrupt remapping in init_dmars even x2apic
is not supported.

[dwmw2: Update Kconfig accordingly, fix build with INTR_REMAP && !X2APIC]
Signed-off-by: NWeidong Han <weidong.han@intel.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

CONFIG_DEBUG_PAGEALLOC is now supported by x86, powerpc, sparc64, and
s390.  This patch implements it for the rest of the architectures by
filling the pages with poison byte patterns after free_pages() and
verifying the poison patterns before alloc_pages().

This generic one cannot detect invalid page accesses immediately but
invalid read access may cause invalid dereference by poisoned memory and
invalid write access can be detected after a long delay.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NMatt LaPlante <kernel1@cyberdogtech.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Impact: disable unused code

x86 is fully converted to flow handlers. No need to keep the
deprecated __do_IRQ() support active.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

If we fix a few highmem-related thinkos and a couple of printk format
warnings, the Intel IOMMU driver works fine in a 32-bit kernel.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Impact: make use of DMA-API debugging code in x86
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Impact: disable unused code

x86 is fully converted to flow handlers. No need to keep the
deprecated __do_IRQ() support active.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Provide the x86 trace callbacks to trace syscalls.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <1236401580-5758-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: configuration bug fix

Just like for x86-64, the range of widths valid for NODE_SHIFT is not
unbounded. The upper bound 64-bit uses is definitely also an upper
bound for 32-bit.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
LKML-Reference: <49B90F12.76E4.0078.0@novell.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: New major feature

This patch add kexec jump support for x86_64. More information about
kexec jump can be found in corresponding x86_32 support patch.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Introduce:

 cat /sys/kernel/debug/x86/cpu/*

for Intel and AMD processors to view / debug the state of each CPU.

By using this we can debug whole range of registers and other
cpu information for debugging purpose and monitor how things
are changing.

This can be useful for developers as well as for users.
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
LKML-Reference: <1236701373.3387.4.camel@localhost.localdomain>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Now that the obvious bugs have been worked out, specifically
the iwlagn issue, and the write buffer errata, DMAR should be safe
to turn back on by default. (We've had it on since those patches were
first written a few weeks ago, without any noticeable bug reports
(most have been due to the dma-api debug patchset.))
Signed-off-by: NKyle McMartin <kyle@redhat.com>
Acked-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup; preparation for feature

The mce_amd_64 code has an own private MC threshold vector with an own
interrupt handler. Since Intel needs a similar handler
it makes sense to share the vector because both can not
be active at the same time.

I factored the common APIC handler code into a separate file which can
be used by both the Intel or AMD MC code.

This is needed for the next patch which adds an Intel specific
CMCI handler.

This patch should be a nop for AMD, it just moves some code
around.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Impact: cleaner and consistent bootmem wrapping

By setting CONFIG_HAVE_ARCH_BOOTMEM_NODE, archs can define
arch-specific wrappers for bootmem allocation.  However, this is done
a bit strangely in that only the high level convenience macros can be
changed while lower level, but still exported, interface functions
can't be wrapped.  This not only is messy but also leads to strange
situation where alloc_bootmem() does what the arch wants it to do but
the equivalent __alloc_bootmem() call doesn't although they should be
able to be used interchangeably.

This patch updates bootmem such that archs can override / wrap the
backend function - alloc_bootmem_core() instead of the highlevel
interface functions to allow simpler and consistent wrapping.  Also,
HAVE_ARCH_BOOTMEM_NODE is renamed to HAVE_ARCH_BOOTMEM.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@saeurebad.de>

Impact: remove unused/broken code

The Voyager subarch last built successfully on the v2.6.26 kernel
and has been stale since then and does not build on the v2.6.27,
v2.6.28 and v2.6.29-rc5 kernels.

No actual users beyond the maintainer reported this breakage.
Patches were sent and most of the fixes were accepted but the
discussion around how to do a few remaining issues cleanly
fizzled out with no resolution and the code remained broken.

In the v2.6.30 x86 tree development cycle 32-bit subarch support
has been reworked and removed - and the Voyager code, beyond the
build problems already known, needs serious and significant
changes and probably a rewrite to support it.

CONFIG_X86_VOYAGER has been marked BROKEN then. The maintainer has
been notified but no patches have been sent so far to fix it.

While all other subarchs have been converted to the new scheme,
voyager is still broken. We'd prefer to receive patches which
clean up the current situation in a constructive way, but even in
case of removal there is no obstacle to add that support back
after the issues have been sorted out in a mutually acceptable
fashion.

So remove this inactive code for now.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Change the CONFIG_X86_EXTENDED_PLATFORM help text to display the
32bit/64bit extended platform list. This is as suggested by Ingo.
Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org>
Cc: shai@scalex86.org
Cc: "Benzi Galili (Benzi@ScaleMP.com)" <benzi@scalemp.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: use new dynamic allocator, unified access to static/dynamic
        percpu memory

Convert to the new dynamic percpu allocator.

* implement populate_extra_pte() for both 32 and 64
* update setup_per_cpu_areas() to use pcpu_setup_static()
* define __addr_to_pcpu_ptr() and __pcpu_ptr_to_addr()
* define config HAVE_DYNAMIC_PER_CPU_AREA
Signed-off-by: NTejun Heo <tj@kernel.org>

- make oprofile build
- select X86_X2APIC from X86_UV - it relies on it
- export genapic for oprofile modular build
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

so could deselect x2apic
and INTR_REMAP will select x2apic
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This commit:

  aced3cee: x86/Voyager: remove HIBERNATION Kconfig quirk

Made hibernation only available on UP - instead of making it available
on all of x86. Fix it.
Reported-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Patch to rename the CONFIG_X86_NON_STANDARD to CONFIG_X86_EXTENDED_PLATFORM.

The new name represents the subarches better. Also, default this to 'y'
so that many of the sub architectures that were not easily visible now
become visible.

Also re-organize the extended architecture platform and non standard
platform list alphabetically as suggested by Ingo.
Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: NShai Fultheim <shai@scalex86.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>