As suggested by Suresh Siddha and Yinghai Lu:

For x2apic pre-enabled systems, apic driver is set already early
through early_acpi_boot_init()/early_acpi_process_madt()/
acpi_parse_madt()/default_acpi_madt_oem_check() path so that
apic_id_valid() checking will be sufficient during MADT and SRAT
parsing.

For non-x2apic pre-enabled systems, all apic ids should be less
than 255.

This allows us to substitute the checks in
arch/x86/kernel/acpi/boot.c::acpi_parse_x2apic() and
arch/x86/mm/srat.c::acpi_numa_x2apic_affinity_init() with
apic->apic_id_valid().

In addition we can avoid feigning the x2apic cpu feature in the
NumaChip apic code.

The following apic drivers have separate apic_id_valid()
functions which will accept x2apic type IDs :

 x2apic_phys
 x2apic_cluster
 x2apic_uv_x
 apic_numachip
Signed-off-by: NSteffen Persvold <sp@numascale.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Daniel J Blueman <daniel@numascale-asia.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Jack Steiner <steiner@sgi.com>
Link: http://lkml.kernel.org/r/1331925935-13372-1-git-send-email-sp@numascale.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Fix the following section warnings :

WARNING: vmlinux.o(.text+0x49dbc): Section mismatch in reference
from the function acpi_map_cpu2node() to the variable
.cpuinit.data:__apicid_to_node The function acpi_map_cpu2node()
references the variable __cpuinitdata __apicid_to_node. This is
often because acpi_map_cpu2node lacks a __cpuinitdata
annotation or the annotation of __apicid_to_node is wrong.

WARNING: vmlinux.o(.text+0x49dc1): Section mismatch in reference
from the function acpi_map_cpu2node() to the function
.cpuinit.text:numa_set_node() The function acpi_map_cpu2node()
references the function __cpuinit numa_set_node(). This is often
because acpi_map_cpu2node lacks a __cpuinit  annotation or the
annotation of numa_set_node is wrong.

WARNING: vmlinux.o(.text+0x526e77): Section mismatch in
reference from the function prealloc_protection_domains() to the
function .init.text:alloc_passthrough_domain() The function
prealloc_protection_domains() references the function __init
alloc_passthrough_domain(). This is often because
prealloc_protection_domains lacks a __init  annotation or the annotation of alloc_passthrough_domain is wrong.
Signed-off-by: NSteffen Persvold <sp@numascale.com>
Link: http://lkml.kernel.org/r/1331810188-24785-1-git-send-email-sp@numascale.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

If the x2apic feature is not present (either the cpu is not capable of it
or the user has disabled the feature using boot-parameter etc), ignore the
x2apic MADT and SRAT entries provided by the ACPI tables.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/20111222014632.540896503@sbsiddha-desk.sc.intel.comSigned-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

...and make it static

no functional change

cc: x86@kernel.org
Acked-by: NH. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Some BIOSes will reset the Intel MISC_ENABLE MSR (specifically the
XD_DISABLE bit) when resuming from S3, which can interact poorly with
ebba638a. In 32bit PAE mode, this can
lead to a fault when EFER is restored by the kernel wakeup routines,
due to it setting the NX bit for a CPU that (thanks to the BIOS reset)
now incorrectly thinks it lacks the NX feature. (64bit is not affected
because it uses a common CPU bring-up that specifically handles the
XD_DISABLE bit.)

The need for MISC_ENABLE being restored so early is specific to the S3
resume path. Normally, MISC_ENABLE is saved in save_processor_state(),
but this happens after the resume header is created, so just reproduce
the logic here. (acpi_suspend_lowlevel() creates the header, calls
do_suspend_lowlevel, which calls save_processor_state(), so the saved
processor context isn't available during resume header creation.)

[ hpa: Consider for stable if OK in mainline ]
Signed-off-by: NKees Cook <kees.cook@canonical.com>
Link: http://lkml.kernel.org/r/20110707011034.GA8523@outflux.netSigned-off-by: NH. Peter Anvin <hpa@zytor.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: <stable@kernel.org> 2.6.38+

Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: daniel.blueman@gmail.com
Link: http://lkml.kernel.org/r/20110518233157.909013179@sbsiddha-MOBL3.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

acpi_sleep=s4_nonvs is superseded by acpi_sleep=nonvs, so remove it.
Signed-off-by: NWANG Cong <amwang@redhat.com>
Acked-by: NPavel Machek <pavel@ucw.cz>
Acked-by: NLen Brown <lenb@kernel.org>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

New binutils version 2.21.0.20110302-1 started checking that the symbol
parameter to the .size directive matches the entry name's
symbol parameter, unearthing two mismatches:

  AS      arch/x86/kernel/acpi/wakeup_rm.o
  arch/x86/kernel/acpi/wakeup_rm.S: Assembler messages:
  arch/x86/kernel/acpi/wakeup_rm.S:12: Error: .size expression with symbol `wakeup_code_start' does not evaluate to a constant

  arch/x86/kernel/entry_32.S: Assembler messages:
  arch/x86/kernel/entry_32.S:1421: Error: .size expression with
  symbol `apf_page_fault' does not evaluate to a constant

The problem was discovered while using Debian's binutils
(2.21.0.20110302-1) and experimenting with binutils from
upstream.

Thanks Alexander and H.J. for the vital help.
Signed-off-by: NSedat Dilek <sedat.dilek@gmail.com>
Cc: Alexander van Heukelum <heukelum@fastmail.fm>
Cc: H.J. Lu <hjl.tools@gmail.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
LKML-Reference: <1299620364-21644-1-git-send-email-sedat.dilek@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

On some SB800 systems polarity for IOAPIC pin2 is wrongly
specified as low active by BIOS. This caused system hangs after
resume from S3 when HPET was used in one-shot mode on such
systems because a timer interrupt was missed (HPET signal is
high active).

For more details see:

  http://marc.info/?l=linux-kernel&m=129623757413868Tested-by: NManoj Iyer <manoj.iyer@canonical.com>
Tested-by: NAndre Przywara <andre.przywara@amd.com>
Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: stable@kernel.org # 37.x, 32.x
LKML-Reference: <20110224145346.GD3658@alberich.amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The function do_suspend_lowlevel() is specific to x86 and defined in
assembly code, so it should be called from the x86 low-level suspend
code rather than from acpi_suspend_enter().

Merge do_suspend_lowlevel() into the x86's acpi_save_state_mem() and
change the name of the latter to acpi_suspend_lowlevel(), so that the
function's purpose is better reflected by its name.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

The function acpi_restore_state_mem() has never been and most likely
never will be used, so remove it.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Use the unified trampoline allocation setup to allocate and install
the ACPI wakeup code in low memory.
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
LKML-Reference: <4D5DFBE4.7090104@intel.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Matthieu Castet <castet.matthieu@free.fr>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>

We reserve lowmem for the things that need it, like the ACPI
wakeup code, way early to guarantee availability.  This happens
before we set up the proper pagetables, so set_memory_x() has no
effect.

Until we have a better solution, use an initcall to mark the
wakeup code executable.
Originally-by: NMatthieu Castet <castet.matthieu@free.fr>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Cc: Matthias Hopf <mhopf@suse.de>
Cc: rjw@sisk.pl
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <4D4F8019.2090104@zytor.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Since checkin ebba638a we call
verify_cpu even in 32-bit mode.  Unfortunately, calling a function
means using the stack, and the stack pointer was not initialized in
the 32-bit setup code!  This code initializes the stack pointer, and
simplifies the interface slightly since it is easier to rely on just a
pointer value rather than a descriptor; we need to have different
values for the segment register anyway.

This retains start_stack as a virtual address, even though a physical
address would be more convenient for 32 bits; the 64-bit code wants
the other way around...
Reported-by: NMatthieu Castet <castet.matthieu@free.fr>
LKML-Reference: <4D41E86D.8060205@free.fr>
Tested-by: NKees Cook <kees.cook@canonical.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Unlike 64bit, 32bit has been using its own cpu_to_node_map[] for
CPU -> NUMA node mapping.  Replace it with early_percpu variable
x86_cpu_to_node_map and share the mapping code with 64bit.

* USE_PERCPU_NUMA_NODE_ID is now enabled for 32bit too.

* x86_cpu_to_node_map and numa_set/clear_node() are moved from
  numa_64 to numa.  For now, on 32bit, x86_cpu_to_node_map is initialized
  with 0 instead of NUMA_NO_NODE.  This is to avoid introducing unexpected
  behavior change and will be updated once init path is unified.

* srat_detect_node() is now enabled for x86_32 too.  It calls
  numa_set_node() and initializes the mapping making explicit
  cpu_to_node_map[] updates from map/unmap_cpu_to_node() unnecessary.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: eric.dumazet@gmail.com
Cc: yinghai@kernel.org
Cc: brgerst@gmail.com
Cc: gorcunov@gmail.com
Cc: penberg@kernel.org
Cc: shaohui.zheng@intel.com
Cc: rientjes@google.com
LKML-Reference: <1295789862-25482-15-git-send-email-tj@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: David Rientjes <rientjes@google.com>

The mapping between cpu/apicid and node is done via
apicid_to_node[] on 64bit and apicid_2_node[] +
apic->x86_32_numa_cpu_node() on 32bit. This difference makes it
difficult to further unify 32 and 64bit NUMA handling.

This patch unifies it by replacing both apicid_to_node[] and
apicid_2_node[] with __apicid_to_node[] array, which is accessed
by two accessors - set_apicid_to_node() and numa_cpu_node().  On
64bit, numa_cpu_node() always consults __apicid_to_node[]
directly while 32bit goes through apic->numa_cpu_node() method
to allow apic implementations to override it.

srat_detect_node() for amd cpus contains workaround for broken
NUMA configuration which assumes relationship between APIC ID,
HT node ID and NUMA topology.  Leave it to access
__apicid_to_node[] directly as mapping through CPU might result
in undesirable behavior change.  The comment is reformatted and
updated to note the ugliness.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NPekka Enberg <penberg@kernel.org>
Cc: eric.dumazet@gmail.com
Cc: yinghai@kernel.org
Cc: brgerst@gmail.com
Cc: gorcunov@gmail.com
Cc: shaohui.zheng@intel.com
Cc: rientjes@google.com
LKML-Reference: <1295789862-25482-14-git-send-email-tj@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: David Rientjes <rientjes@google.com>

Generic Hardware Error Source provides a way to report platform
hardware errors (such as that from chipset). It works in so called
"Firmware First" mode, that is, hardware errors are reported to
firmware firstly, then reported to Linux by firmware. This way, some
non-standard hardware error registers or non-standard hardware link
can be checked by firmware to produce more valuable hardware error
information for Linux.

This patch adds POLL/IRQ/NMI notification types support.

Because the memory area used to transfer hardware error information
from BIOS to Linux can be determined only in NMI, IRQ or timer
handler, but general ioremap can not be used in atomic context, so a
special version of atomic ioremap is implemented for that.

Known issue:

- Error information can not be printed for recoverable errors notified
  via NMI, because printk is not NMI-safe. Will fix this via delay
  printing to IRQ context via irq_work or make printk NMI-safe.

v2:

- adjust printk format per comments.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Found one x2apic pre-enabled system, x2apic_mode suddenly get
corrupted after register some cpus, when compiled
CONFIG_NR_CPUS=255 instead of 512.

It turns out that generic_processor_info() ==> phyid_set(apicid,
phys_cpu_present_map) causes the problem.

phys_cpu_present_map is sized by MAX_APICS bits, and pre-enabled
system some cpus have an apic id > 255.

The variable after phys_cpu_present_map may get corrupted
silently:

 ffffffff828e8420 B phys_cpu_present_map
 ffffffff828e8440 B apic_verbosity
 ffffffff828e8444 B local_apic_timer_c2_ok
 ffffffff828e8448 B disable_apic
 ffffffff828e844c B x2apic_mode
 ffffffff828e8450 B x2apic_disabled
 ffffffff828e8454 B num_processors
 ...

Actually phys_cpu_present_map is referenced via apic id, instead
index. We should use MAX_LOCAL_APIC instead MAX_APICS.

For 64-bit it will be 32768 in all cases. BSS will increase by 4k bytes
on 64-bit:

	text		data		bss		dec		filename
	21696943	4193748		12787712	38678403	vmlinux.before
	21696943	4193748		12791808	38682499	vmlinux.after

No change on 32bit.

Finally we can remove MAX_APCIS that was rather confusing.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
LKML-Reference: <4D23BD9C.3070102@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Recent Intel new system have different order in MADT, aka will list all thread0
at first, then all thread1.
But SRAT table still old order, it will list cpus in one socket all together.

If the user have compiled limited NR_CPUS or boot with nr_cpus=, could have missed
to put some cpus apic id to node mapping into apicid_to_node[].

for example for 4 sockets system with 64 cpus with nr_cpus=32 will get crash...

[    9.106288] Total of 32 processors activated (136190.88 BogoMIPS).
[    9.235021] divide error: 0000 [#1] SMP
[    9.235315] last sysfs file:
[    9.235481] CPU 1
[    9.235592] Modules linked in:
[    9.245398]
[    9.245478] Pid: 2, comm: kthreadd Not tainted 2.6.37-rc1-tip-yh-01782-ge92ef79-dirty #274      /Sun Fire x4800
[    9.265415] RIP: 0010:[<ffffffff81075a8f>]  [<ffffffff81075a8f>] select_task_rq_fair+0x4f0/0x623
...
[    9.645938] RIP  [<ffffffff81075a8f>] select_task_rq_fair+0x4f0/0x623
[    9.665356]  RSP <ffff88103f8d1c40>
[    9.665568] ---[ end trace 2296156d35fdfc87 ]---

So let just parse all cpu entries in SRAT.

Also add apicid checking with MAX_LOCAL_APIC, in case We could out of boundaries of
apicid_to_node[].

it fixes following bug too.
https://bugzilla.kernel.org/show_bug.cgi?id=22662

-v2: expand to 32bit according to hpa
   need to add MAX_LOCAL_APIC for 32bit
Reported-and-Tested-by: NWu Fengguang <fengguang.wu@intel.com>
Reported-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Tested-by: NMyron Stowe <myron.stowe@hp.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <4D0AD486.9020704@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

There are 3 places defining similar functions of saving IRQ vector
info into mp_irqs[] array: mmparse/acpi/mrst.

Replace the redundant code by a common function in io_apic.c as it's
only called when CONFIG_X86_IO_APIC=y
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20101207133204.4d913c5a@feng-i7>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

They are the same, move the common function to apic.c to allow
further cleanups.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <4CFDF675.4060305@kernel.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

b40827fa added an include
directive which is needless and is taken care of by a previous
one. Remove it.
Caught-by: NJaswinder Singh Rajput <jaswinderlinux@gmail.com>
Signed-off-by: NBorislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jaswinder Singh Rajput <jaswinderlinux@gmail.com>
Cc: H. Peter Anvin <hpa@linux.intel.com>
LKML-Reference: <20101025162523.GA4712@a1.tnic>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Commit b40827fa ("x86-32, mm: Add an initial page table for core
bootstrapping") added an include directive which is needless and is
taken care of by a previous one.  Remove it.
Caught-by: NJaswinder Singh Rajput <jaswinderlinux@gmail.com>
Signed-off-by: NBorislav Petkov <bp@alien8.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>

Rather than using a tree of conditionals, use function pointer
for acpi_register_gsi.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>

This patch adds an initial page table with low mappings used exclusively
for booting APs/resuming after ACPI suspend/machine restart. After this,
there's no need to add low mappings to swapper_pg_dir and zap them later
or create own swsusp PGD page solely for ACPI sleep needs - we have
initial_page_table for that.
Signed-off-by: NBorislav Petkov <bp@alien8.de>
LKML-Reference: <20101020070526.GA9588@liondog.tnic>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

cpu_cstate_entry is a percpu pointer
but was missing __percpu markup.
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

We have MWAIT constants spread across three different .c files, for no
good reason.  Move them all into a common header file.
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Reviewed-by: NArjan van de Ven <arjan@linux.intel.com>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <tip-*@git.kernel.org>

1.include linux/memblock.h directly. so later could reduce e820.h reference.
2 this patch is done by sed scripts mainly

-v2: use MEMBLOCK_ERROR instead of -1ULL or -1UL
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Commit 2a6b6976
(ACPI: Store NVS state even when entering suspend to RAM) caused the
ACPI suspend code save the NVS area during suspend and restore it
during resume unconditionally, although it is known that some systems
need to use acpi_sleep=s4_nonvs for hibernation to work.  To allow
the affected systems to avoid saving and restoring the NVS area
during suspend to RAM and resume, introduce kernel command line
option acpi_sleep=nonvs and make acpi_sleep=s4_nonvs work as its
alias temporarily (add acpi_sleep=s4_nonvs to the feature removal
file).

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16396 .
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: Ntomas m <tmezzadra@gmail.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

It turns out that there is a bit in the _CST for Intel FFH C3
that tells the OS if we should be checking BM_STS or not.

Linux has been unconditionally checking BM_STS.
If the chip-set is configured to enable BM_STS,
it can retard or completely prevent entry into
deep C-states -- as illustrated by turbostat:

http://userweb.kernel.org/~lenb/acpi/utils/pmtools/turbostat/

ref: Intel Processor Vendor-Specific ACPI Interface Specification
table 4 "_CST FFH GAS Field Encoding"
Bit 1: Set to 1 if OSPM should use Bus Master avoidance for this C-state

https://bugzilla.kernel.org/show_bug.cgi?id=15886Signed-off-by: NLen Brown <len.brown@intel.com>

Use symbolic MSR names instead of hardcoding the MSR index.
Signed-off-by: NBrian Gerst <brgerst@gmail.com>
LKML-Reference: <1279371808-24804-2-git-send-email-brgerst@gmail.com>
Reviewed-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

pavel@suse.cz no longer works, replace it with working address.
Signed-off-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

When I introduced the global variable gsi_end I thought gsi_end on
io_apics was one past the end of the gsi range for the io_apic.  After
it was pointed out the the range on io_apics was inclusive I changed
my global variable to match.  That was a big mistake.  Inclusive
semantics without a range start cannot describe the case when no gsi's
are allocated.  Describing the case where no gsi's are allocated is
important in sfi.c and mpparse.c so that we can assign gsi numbers
instead of blindly copying the gsi assignments the BIOS has done as we
do in the acpi case.

To keep from getting the global variable confused with the gsi range
end rename it gsi_top.

To allow describing the case where no gsi's are allocated have gsi_top
be one place the highest gsi number seen in the system.

This fixes an off by one bug in sfi.c:
Reported-by: Njacob pan <jacob.jun.pan@linux.intel.com>

This fixes the same off by one bug in mpparse.c:

This fixes an off unreachable by one bug in acpi/boot.c:irq_to_gsi
Reported-by: NYinghai <yinghai.lu@oracle.com>
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
LKML-Reference: <m17hm9jre7.fsf_-_@fess.ebiederm.org>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

The ACPI spec tells us that the firmware will reenable SCI_EN on resume.
Reality disagrees in some cases. The ACPI spec tells us that the only way
to set SCI_EN is via an SMM call.
https://bugzilla.kernel.org/show_bug.cgi?id=13745 shows us that doing so
may break machines. Tracing the ACPI calls made by Windows shows that it
unconditionally sets SCI_EN on resume with a direct register write, and
therefore the overwhelming probability is that everything is fine with
this behaviour.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Tested-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

Now that the generic irq layer is performing the exact same remapping as
io_apic_renumber_irq we can kill this weird  es7000 specific function.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
LKML-Reference: <1269936436-7039-15-git-send-email-ebiederm@xmission.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

ACPI irq source overrides are allowed for the 16 isa irqs and are
allowed to map any gsi to any isa irq.  A few motherboards have been
seen to take advantage of this and put the isa irqs on the 2nd or
3rd ioapic.  This causes some problems, most notably the fact
that we can not use any gsi < 16.

To correct this move the gsis that are not isa irqs and have
a gsi number < 16 into the linux irq space just past gsi_end.
This is what the es7000 platform is doing today.  Moving only the
low 16 gsis above the rest of the gsi's only penalizes weird
platforms, leaving sane acpi implementations with a 1-1 mapping
of gsis and irqs.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
LKML-Reference: <1269936436-7039-14-git-send-email-ebiederm@xmission.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Use the global gsi_end value now that all ioapics have
valid gsi numbers instead of a combination of acpi_probe_gsi
and walking all of the ioapics and couting their number of
entries by hand if acpi_probe_gsi gave us an answer we did
not like.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
LKML-Reference: <1269936436-7039-13-git-send-email-ebiederm@xmission.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Remove the assumption that there is not an override for isa irq 0.
Instead lookup the gsi and from that lookup the ioapic and pin of each
isa irq indivdually.

In general this should not have any behavioural affect but in
perverse cases this gets all of the details correct, instead of
doing something weird.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
LKML-Reference: <1269936436-7039-5-git-send-email-ebiederm@xmission.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Currently acpi_sci_ioapic_setup calls mp_override_legacy_irq with
bus_irq == gsi, which is wrong if we are comming from an override
Instead pass the bus_irq into acpi_sci_ioapic_setup.

This fix was inspired by a similar fix from:
Yinghai Lu <yinghai@kernel.org>
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
LKML-Reference: <1269936436-7039-4-git-send-email-ebiederm@xmission.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>