- 11 9月, 2012 2 次提交
-
-
由 Mark Brown 提交于
This is better style since it has us obtaining all resources before we try the ASoC probe. This change also fixes a potential issue where we don't enable the regulators before trying to confirm the device ID which could cause a failure during probe in some system configurations. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NTimur Tabi <timur@freescale.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NTimur Tabi <timur@freescale.com>
-
- 10 9月, 2012 15 次提交
-
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Bo Shen 提交于
The core_intercon is added two times, remove the redundant one Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Better style as we acquire resources before trying the ASoC card probe. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Kuninori Morimoto 提交于
struct fsi_master *master became member of struct fsi_priv from 71f6e064 (ASoC: sh_fsi: avoid using global variable) So, master = NULL is not necessary on fsi_probe() now. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Kuninori Morimoto 提交于
pm_runtime_disable() error handling timing on fsi_probe() was wrong. This patch fixes it up. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Long term all drivers should be using regmap directly. This is more idiomatic and moves us towards the removal of the ASoC level cache code. The initialiasation of reserved register bits in probe() is slightly odd as the defaults being written don't appear to match the silicon defaults but the new code should have the same effect as the old code. The watchdog code will now unconditionally do a mute and unmute when resyncing but since we only sync when we are very sure there is something to sync this should have no impact. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NJohannes Stezenbach <js@sig21.net>
-
由 Mark Brown 提交于
This is better style as it ensures we don't try to do the ASoC probe without required resources. Also convert to devm_ while we're at it, saving a bit of code, and fix a leak of enable on error. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NJohannes Stezenbach <js@sig21.net>
-
由 Mark Brown 提交于
Ensure that we have confirmed that we've got the device in place before we register with ASoC. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
This is better style since we acquire all needed resources before we try to do the ASoC card probe. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 08 9月, 2012 1 次提交
-
-
由 Mark Brown 提交于
This will be used to enable additional control of the regulators. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@ti.com>
-
- 06 9月, 2012 8 次提交
-
-
由 Gaëtan Carlier 提交于
This uses already defined name of registers and makes code more readable. Signed-off-by: NGaëtan Carlier <gcembed@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Javier Martin 提交于
Revert 0865a75d(ASoC: imx-ssi: Remove mono support). The bug this patch is meant to solve doesn't occur in Visstrim_M10 boards. Furthermore, after applying this patch sound in Visstrim_M10 is played at slower rates. Signed-off-by: NJavier Martin <javier.martin@vista-silicon.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Since bypass paths aren't part of DAPM streams and we may not have any DAPM streams there may not be anything that triggers a DAPM sync for them. Mark all input and output widgets as dirty and then sync to do so at the end of suspend and resume. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@ti.com>
-
由 Hebbar, Gururaja 提交于
The OMAP2+ variant of McASP is different from Davinci variant w.r.to some register offset. Changes - Add new MCASP_VERSION_3 to identify new variant. New DT compatible "ti,omap2-mcasp-audio" to identify version 3 controller. - The register offsets are handled depending on the version. Note: DMA parameters (dma fifo offset) are not updated and will be done later. Signed-off-by: NHebbar, Gururaja <gururaja.hebbar@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Stephen Warren 提交于
Move the Tegra+WM8903 ASoC platform data header out of arch/arm/mach-tegra, as a pre-requisite of single zImage. Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Emil Goode 提交于
Fix warning by using format specifier %zu for type size_t Sparse warning: sound/soc/codecs/wm0010.c:411:2: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘size_t’ [-Wformat] Signed-off-by: NEmil Goode <emilgoode@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Dan Carpenter 提交于
We're holding the wm0010->lock mutex when we goto err_core. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Fengguang Wu 提交于
FYI, there are new coccinelle warnings show up in tree: git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-3.7 head: e3523e01 commit: e3523e01 [95/95] ASoC: wm0010: Add initial wm0010 DSP driver All coccinelle warnings: + sound/soc/codecs/wm0010.c:850:7-27: ERROR: Threaded IRQ with no primary handler requested without IRQF_ONESHOT -- + sound/soc/codecs/wm0010.c:660:1-7: preceding lock on line 359 vim +850 sound/soc/codecs/wm0010.c 847 trigger = IRQF_TRIGGER_FALLING; 848 trigger |= IRQF_ONESHOT; 849 > 850 ret = request_threaded_irq(irq, NULL, wm0010_irq, trigger, 851 "wm0010", wm0010); 852 if (ret) 853 dev_err(wm0010->dev, "Failed to request IRQ %d: %d\n", Please consider folding the attached diff :-) Signed-off-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 05 9月, 2012 1 次提交
-
-
由 Peter Ujfalusi 提交于
Part of commit (which patches sound/soc/omap/mcbsp.c file): 8fef6263 ARM/ASoC: omap-mcbsp: Remove CLKR/FSR mux configuration code since the tree where it has been applied did not had the earlier patch: d0db84e7 ASoC: omap-mcbsp: Fix 6pin mux configuration which changed code around omap_mcbsp_6pin_src_mux(). Because of the missing part from 8fef6263 the sound/soc/omap/mcbsp.c does not compile in linux-next. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 01 9月, 2012 1 次提交
-
-
由 Hebbar, Gururaja 提交于
Fix typo caused by recent commit (cf53756 - ASoC: davinci: davinci-pcm does not need to be a plaform_driver) Signed-off-by: NHebbar, Gururaja <gururaja.hebbar@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 29 8月, 2012 2 次提交
-
-
由 Alexander Shiyan 提交于
This patch is to rename the directory "ep93xx" in "cirrus". Name more accurately reflects the manufacturer and allows to add drivers not only for architecture ep93xx in this directory. Patch not contain any functional changes. Signed-off-by: NAlexander Shiyan <shc_work@mail.ru> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Sangsu Park 提交于
All SAMSUNG ASoC needs SND_SOC_SAMSUNG configuration. This patch change Kconfig to support all SAMSUNG ASoC. Signed-off-by: NSangsu Park <sangsu4u.park@samsung.com> Acked-by: NSangbeom Kim <sbkim73@samsung.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 28 8月, 2012 7 次提交
-
-
由 Hebbar, Gururaja 提交于
Add device tree probe for McASP driver. Note: DMA parameters are not populated from DT and will be done later. Signed-off-by: NHebbar, Gururaja <gururaja.hebbar@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Hebbar, Gururaja 提交于
Davinci McASP header & driver are shared by few OMAP platforms (like TI81xx, AM335x). Splitting asp header into Davinci platform specific header and Audio specific header helps to share them across platforms. Audio specific defines is moved to to common <linux/platform_data/davinci_asp.h> so that the header can be accessed by all related platforms. While here, correct the header usage (remove multiple header re-definitions and unused headers) and remove platform names from structures comments and enum. Also some some coding style errors. Signed-off-by: NHebbar, Gururaja <gururaja.hebbar@ti.com> Acked-by: NVaibhav Bedia <vaibhav.bedia@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Hebbar, Gururaja 提交于
Same as the commit 518de86b (ASoC: tegra: register 'platform' from DAIs, get rid of pdev). It makes davinci-pcm not a platform_driver but helper to register "platform", so that the platform_device for davinci-pcm can be saved completely. Signed-off-by: NHebbar, Gururaja <gururaja.hebbar@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Hebbar, Gururaja 提交于
Device tree support for tlv320aic3x CODEC driver. Signed-off-by: NHebbar, Gururaja <gururaja.hebbar@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Sachin Kamat 提交于
module_spi_driver makes the code simpler by eliminating module_init and module_exit calls. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Sachin Kamat 提交于
module_spi_driver makes the code simpler by eliminating module_init and module_exit calls. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Sachin Kamat 提交于
module_spi_driver makes the code simpler by eliminating module_init and module_exit calls. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 26 8月, 2012 3 次提交
-
-
由 Peter Ujfalusi 提交于
Since we always need to have set and get callbacks for McBSP sidetone it makes sense to combine the two macro to create the two callbacks. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Peter Ujfalusi 提交于
To remove duplicated code from the driver. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: NJarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Peter Ujfalusi 提交于
When asked to add the ST controls warn only if the st_data is missing. In this way we do not block the otherwise functional card to probe. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: NJarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-