提交 b61d6d40 编写于 作者: M Mark Brown

ASoC: cs4270: Move regulator acquisition to I2C probe()

This is better style since it has us obtaining all resources before we
try the ASoC probe. This change also fixes a potential issue where we
don't enable the regulators before trying to confirm the device ID which
could cause a failure during probe in some system configurations.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NTimur Tabi <timur@freescale.com>
上级 19ace0e9
......@@ -487,7 +487,7 @@ static struct snd_soc_dai_driver cs4270_dai = {
static int cs4270_probe(struct snd_soc_codec *codec)
{
struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec);
int i, ret;
int ret;
/* Tell ASoC what kind of I/O to use to read the registers. ASoC will
* then do the I2C transactions itself.
......@@ -521,25 +521,8 @@ static int cs4270_probe(struct snd_soc_codec *codec)
return ret;
}
/* get the power supply regulators */
for (i = 0; i < ARRAY_SIZE(supply_names); i++)
cs4270->supplies[i].supply = supply_names[i];
ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(cs4270->supplies),
cs4270->supplies);
if (ret < 0)
return ret;
ret = regulator_bulk_enable(ARRAY_SIZE(cs4270->supplies),
cs4270->supplies);
if (ret < 0)
goto error_free_regulators;
return 0;
error_free_regulators:
regulator_bulk_free(ARRAY_SIZE(cs4270->supplies),
cs4270->supplies);
return ret;
}
......@@ -555,7 +538,6 @@ static int cs4270_remove(struct snd_soc_codec *codec)
struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec);
regulator_bulk_disable(ARRAY_SIZE(cs4270->supplies), cs4270->supplies);
regulator_bulk_free(ARRAY_SIZE(cs4270->supplies), cs4270->supplies);
return 0;
};
......@@ -658,7 +640,24 @@ static int cs4270_i2c_probe(struct i2c_client *i2c_client,
{
struct device_node *np = i2c_client->dev.of_node;
struct cs4270_private *cs4270;
int ret;
int ret, i;
cs4270 = devm_kzalloc(&i2c_client->dev, sizeof(struct cs4270_private),
GFP_KERNEL);
if (!cs4270) {
dev_err(&i2c_client->dev, "could not allocate codec\n");
return -ENOMEM;
}
/* get the power supply regulators */
for (i = 0; i < ARRAY_SIZE(supply_names); i++)
cs4270->supplies[i].supply = supply_names[i];
ret = devm_regulator_bulk_get(&i2c_client->dev,
ARRAY_SIZE(cs4270->supplies),
cs4270->supplies);
if (ret < 0)
return ret;
/* See if we have a way to bring the codec out of reset */
if (np) {
......@@ -694,13 +693,6 @@ static int cs4270_i2c_probe(struct i2c_client *i2c_client,
i2c_client->addr);
dev_info(&i2c_client->dev, "hardware revision %X\n", ret & 0xF);
cs4270 = devm_kzalloc(&i2c_client->dev, sizeof(struct cs4270_private),
GFP_KERNEL);
if (!cs4270) {
dev_err(&i2c_client->dev, "could not allocate codec\n");
return -ENOMEM;
}
i2c_set_clientdata(i2c_client, cs4270);
cs4270->control_type = SND_SOC_I2C;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册