Acquire a page ref on pages in ->readpages() and release them when the
read has finished.  Not acquiring a reference didn't seem to cause any
trouble since the page is locked and will not be kicked out of the
page cache during the read.

However the following patches will want to remove the page from the
cache so a separate ref is needed.  Making the reference in req->pages
explicit also makes the code easier to understand.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

Replace uses of get_user_pages() with get_user_pages_fast().  It looks
nicer and should be faster in most cases.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

"map" isn't needed any more after: 0bd87182 "fuse: fix kunmap in
fuse_ioctl_copy_user" 
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
  cmd640: fix kernel oops in test_irq() method
  pdc202xx_old: ignore "FIFO empty" bit in test_irq() method
  pdc202xx_old: wire test_irq() method for PDC2026x
  IDE: pass IRQ flags to the IDE core
  ide: fix comment typo in ide.h

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (30 commits)
  Blackfin: SMP: fix continuation lines
  Blackfin: acvilon: fix timeout usage for I2C
  Blackfin: fix typo in BF537 IRQ comment
  Blackfin: unify duplicate MEM_MT48LC32M8A2_75 kconfig options
  Blackfin: set ARCH_KMALLOC_MINALIGN
  Blackfin: use atomic kmalloc in L1 alloc so it too can be atomic
  Blackfin: another year of changes (update copyright in boot log)
  Blackfin: optimize strncpy a bit
  Blackfin: isram: clean up ITEST_COMMAND macro and improve the selftests
  Blackfin: move string functions to normal lib/ assembly
  Blackfin: SIC: cut down on IAR MMR reads a bit
  Blackfin: bf537-minotaur: fix build errors due to header changes
  Blackfin: kgdb: pass up the CC register instead of a 0 stub
  Blackfin: handle HW errors in the new "FAULT" printing code
  Blackfin: show the whole accumulator in the pseudo DBG insn
  Blackfin: support all possible registers in the pseudo instructions
  Blackfin: add support for the DBG (debug output) pseudo insn
  Blackfin: change the BUG opcode to an unused 16-bit opcode
  Blackfin: allow NMI watchdog to be used w/RETN as a scratch reg
  Blackfin: add support for the DBGA (debug assert) pseudo insn
  ...

* 'bkl/ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing:
  uml: Pushdown the bkl from harddog_kern ioctl
  sunrpc: Pushdown the bkl from sunrpc cache ioctl
  sunrpc: Pushdown the bkl from ioctl
  autofs4: Pushdown the bkl from ioctl
  uml: Convert to unlocked_ioctls to remove implicit BKL
  ncpfs: BKL ioctl pushdown
  coda: Clean-up whitespace problems in pioctl.c
  coda: BKL ioctl pushdown
  drivers: Push down BKL into various drivers
  isdn: Push down BKL into ioctl functions
  scsi: Push down BKL into ioctl functions
  dvb: Push down BKL into ioctl functions
  smbfs: Push down BKL into ioctl function
  coda/psdev: Remove BKL from ioctl function
  um/mmapper: Remove BKL usage
  sn_hwperf: Kill BKL usage
  hfsplus: Push down BKL into ioctl function

* git://git.infradead.org/battery-2.6:
  ds2760_battery: Document ABI change
  ds2760_battery: Make charge_now and charge_full writeable
  power_supply: Add support for writeable properties
  power_supply: Use attribute groups
  power_supply: Add test_power driver
  tosa_battery: Fix build error due to direct driver_data usage
  wm97xx_battery: Quieten sparse warning (bat_set_pdata not declared)
  ds2782_battery: Get rid of magic numbers in driver_data
  ds2782_battery: Add support for ds2786 battery gas gauge
  pda_power: Add function callbacks for suspend and resume
  wm831x_power: Use genirq
  Driver for Zipit Z2 battery chip
  ds2782_battery: Fix clientdata on removal

Merge branch 'timers-for-linus-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-for-linus-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  timers: Fix slack calculation for expired timers
  timekeeping: Fix timezone update

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (25 commits)
  sh: fix up sh7785lcr_32bit_defconfig.
  arch/sh/lib/strlen.S: Checkpatch cleanup
  sh: fix up sh7786 dmaengine build.
  sh: guard cookie consistency across termination in the DMA driver
  sh: prevent the DMA driver from unloading, while in use
  sh: fix Oops in the serial SCI driver
  sh: allow platforms to specify SD-card supported voltages
  mmc: let MFD's provide supported Vdd card voltages to tmio_mmc
  sh: disable SD-card write-protection detection on kfr2r09
  mfd: pass platform flags down to the tmio_mmc driver
  tmio: add a platform flag to disable card write-protection detection
  sh: Add SDHI DMA support to migor
  sh: Add SDHI DMA support to kfr2r09
  sh: Add SDHI DMA support to ms7724se
  sh: Add SDHI DMA support to ecovec
  mmc: add DMA support to tmio_mmc driver, when used on SuperH
  sh: prepare the SDHI MFD driver to pass DMA configuration to tmio_mmc.c
  mmc: prepare tmio_mmc for passing of DMA configuration from the MFD cell
  sh: add DMA slave definitions to sh7724
  sh: add DMA slaves for two SDHI controllers to sh7722
  ...

* 'for-linus' of git://git.open-osd.org/linux-open-osd:
  exofs: confusion between kmap() and kmap_atomic() api
  exofs: Add default address_space_operations

This reverts commit 03ceedea, since it
breaks resume from suspend-to-ram on Rafael's Acer Ferrari One.
NetworkManager thinks everything is ok, but it can't connect to the AP
to get an IP address after the resume.

In fact, it even breaks resume for non-ath9k chipsets: reverting it also
fixes Rafael's Toshiba Protege R500 with the iwlagn driver.  As Johannes
says:

  "Indeed, this patch needs to be reverted. That mac80211 change is wrong
   and completely unnecessary."
Reported-and-requested-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NJohannes Berg <johannes@sipsolutions.net>
Cc: Daniel Yingqiang Ma <yma.cool@gmail.com>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6:
  fat: convert to unlocked_ioctl
  fat: Cleanup nls_unload() usage
  fat: use pack_hex_byte() instead of custom one

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  9p: Optimize TCREATE by eliminating a redundant fid clone.
  9p: cleanup: remove unneeded assignment
  9p: Add mksock support
  fs/9p: Make sure we properly instantiate dentry.
  9p: add 9P2000.L rename operation
  9p: add 9P2000.L statfs operation
  9p: VFS switches for 9p2000.L: VFS switches
  9p: VFS switches for 9p2000.L: protocol and client changes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (59 commits)
  ceph: reuse mon subscribe message instead of allocated anew
  ceph: avoid resending queued message to monitor
  ceph: Storage class should be before const qualifier
  ceph: all allocation functions should get gfp_mask
  ceph: specify max_bytes on readdir replies
  ceph: cleanup pool op strings
  ceph: Use kzalloc
  ceph: use common helper for aborted dir request invalidation
  ceph: cope with out of order (unsafe after safe) mds reply
  ceph: save peer feature bits in connection structure
  ceph: resync headers with userland
  ceph: use ceph. prefix for virtual xattrs
  ceph: throw out dirty caps metadata, data on session teardown
  ceph: attempt mds reconnect if mds closes our session
  ceph: clean up send_mds_reconnect interface
  ceph: wait for mds OPEN reply to indicate reconnect success
  ceph: only send cap releases when mds is OPEN|HUNG
  ceph: dicard cap releases on mds restart
  ceph: make mon client statfs handling more generic
  ceph: drop src address(es) from message header [new protocol feature]
  ...

* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6:
  of: change of_match_device to work with struct device
  of: Remove duplicate fields from of_platform_driver
  drivercore: Add of_match_table to the common device drivers
  arch/microblaze: Move dma_mask from of_device into pdev_archdata
  arch/powerpc: Move dma_mask from of_device into pdev_archdata
  of: eliminate of_device->node and dev_archdata->{of,prom}_node
  of: Always use 'struct device.of_node' to get device node pointer.
  i2c/of: Allow device node to be passed via i2c_board_info
  driver-core: Add device node pointer to struct device
  of: protect contents of of_platform.h and of_device.h
  of/flattree: Make unflatten_device_tree() safe to call from any arch
  of/flattree: make of_fdt.h safe to unconditionally include.

* 'slab-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  slub: Use alloc_pages_exact_node() for page allocation
  slub: __kmalloc_node_track_caller should trace kmalloc_large_node case
  slub: Potential stack overflow
  crypto: Use ARCH_KMALLOC_MINALIGN for CRYPTO_MINALIGN now that it's exposed
  mm: Move ARCH_SLAB_MINALIGN and ARCH_KMALLOC_MINALIGN to <linux/slub_def.h>
  mm: Move ARCH_SLAB_MINALIGN and ARCH_KMALLOC_MINALIGN to <linux/slob_def.h>
  mm: Move ARCH_SLAB_MINALIGN and ARCH_KMALLOC_MINALIGN to <linux/slab_def.h>
  slab: Fix missing DEBUG_SLAB last user
  slab: add memory hotplug support
  slab: Fix continuation lines

Add build testing using 'O=builddir'.

Add build testing with various kconfig symbols disabled, listing
common ones that are known to cause build problems.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The function name must be followed by a space, hypen, space, and a
short description.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

scsi_scan.c: fix incorrectly formatted kernel-doc notation
& convert documentation of 2 functions into kernel-doc.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

documentation: slightly more correct value for MAP_HUGETLB in map_hugetlb.c

still not correct for alpha, mips, parisc or xtensa but working out of
the box in the most common architectures without having to deal with
complicated macros or including architecture specific headers.
Signed-off-by: NCarlo Marcelo Arenas Belon <carenas@sajinet.com.pe>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Documentation/timers/hpet_example.c: fcntl.h is included more than once.
Documentation/timers/hpet_example.c: signal.h is included more than once.
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update explanation of mmotm.
Add explanation of drivers/staging/.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NJonathan Corbet <corbet@lwn.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add info on maintainers and persistent posting.
Update git home page.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NJonathan Corbet <corbet@lwn.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In the example the module_init function should be static.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

commit 3bbb9ec9 (timers: Introduce the concept of timer slack for
legacy timers) does not take the case into account when the timer is
already expired. This broke wireless drivers.

The solution is not to apply slack to already expired timers.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@linux.intel.com>

commit 64ce4c2f (time: Clean up warp_clock()) breaks the timezone
update in a very subtle way. To avoid the direct access to timekeeping
internals it adds the timezone delta to the current time with
timespec_add_safe(). This works nicely when the timezone delta is > 0.
If timezone delta is < 0 then the wrap check in timespec_add_safe()
triggers and timespec_add_safe() returns TIME_MAX and screws up
timekeeping completely. 

The comment above timespec_add_safe() says:
    It's assumed that both values are valid (>= 0)

Add the timezone seconds adjustment directly.
Reported-by: NRafael J. Wysocki <rjw@sisk.pl>
Tested-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NJohn Stultz <johnstul@us.ibm.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The build scripts inadvertently dropped this down to 29-bit, fix it
back up.
Reported-by: NRaul Porcel <armin76@gentoo.org>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

arch/sh/lib/strlen.S:38: ERROR: trailing whitespace
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The timeout value is in jiffies, so it should be using HZ, not a plain
number. As '10000' is ambiguous, 1HZ is used as conservative default.
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Cc: Valentin Yakovenkov <yakovenkov@gmail.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Reported-by: NChristoph Egger <siccegge@cs.fau.de>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Architectures that handle DMA-non-coherent memory need to set
ARCH_KMALLOC_MINALIGN to make sure that kmalloc'ed buffer is DMA-safe:
the buffer doesn't share a cache with the others.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Some drivers allocate L1 SRAM in atomic contexts, so make sure these
functions also use GFP_ATOMIC to avoid BUG()'s.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Add a little strncpy optimization which can easily cut boot time by 20%.

When the kernel is booting with initramfs, it builds up the filesystem
from a cpio archive by calling strncpy_from_user() via fs/namei.c's
do_getname() on every file in the archive (which can be lots) with a
length of PATH_MAX (1024).  This causes the dest of the strncpy to be
padded with many NUL bytes.

This optimization mostly causes these NUL bytes to be padded with a call
to memset() which is already optimized for filling memory quickly, but
the hardware loop helps a little bit as well.

Boot time measured with 'loglevel=0' so UART speed doesn't get in the way.
Signed-off-by: NRobin Getz <robin.getz@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The IADDR2DTEST() macro had some duplicated logic with bit 11 and some
incorrect comments, so scrub all of that.

In order to verify these aren't a problem (and won't be in the future),
extend the self tests to operate on as much L1 SRAM as possible.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Since 'extern inline' doesn't work correctly in the context of the Linux
kernel (too many overriding defines), move the string functions to normal
lib/ assembly files (like the existing mem funcs).  This avoids the forced
inline all over the kernel and allows us to place them constantly in L1.

This also avoids some module failures when gcc inserts calls to string
functions but the kernel build system doesn't fully consult the library
archives.
Signed-off-by: NRobin Getz <robin.getz@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Tweak the for loops that operate on the SIC IAR system MMRs to avoid
re-reading them multiple times in a row.  System MMRs are a little
slower to access, so avoid the penalty when possible.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>