- 06 12月, 2006 15 次提交
-
-
由 Stuart Menefy 提交于
Remove the previous saving of fault codes into the thread_struct as they are never used, and appeared to be inherited from x86. Signed-off-by: NStuart Menefy <stuart.menefy@st.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Stuart Menefy 提交于
This fixes up the kernel for gcc4. The existing exception handlers needed some wrapping for pt_regs access, acessing the registers via a RELOC_HIDE() pointer. The strcpy() issues popped up here too, so add -ffreestanding and kill off the symbol export. Signed-off-by: NStuart Menefy <stuart.menefy@st.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Previously big endian was simply assumed if little endian was not set, which led to some cflags ordering issues. There's not much point to not having a big endian option, so shove one in a choice and wire it up in the Makefile. This lets us clean up some of the cflags ordering while we're at it. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Simple sem2mutex conversion for the p3map semaphores. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This adds some preliminary support for the SH-X2 MMU, used by newer SH-4A parts (particularly SH7785). This MMU implements a 'compat' mode with SH-X MMUs and an 'extended' mode for SH-X2 extended features. Extended features include additional page sizes (8kB, 4MB, 64MB), as well as the addition of page execute permissions. The extended mode attributes are placed in a second data array, which requires us to switch to 64-bit PTEs when in X2 mode. With the addition of the exec perms, we also overhaul the mmap prots somewhat, now that it's possible to handle them more intelligently. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Simple 7785 placeholders to start hooking up other bits of code. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This drops the various IRQ headers that were floating around and primarily providing hardcoded IRQ definitions for the various CPU subtypes. This quickly got to be an unmaintainable mess, made even more evident by the subtle breakage introduced by the SH-2 and SH-2A changes. Now that subtypes are able to register IRQ maps directly, just rip all of the headers out. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
All of the various CPU subtypes currently hardcode TIMER_IRQ, switch this to a config option in the few places we need this. This allows further removal of hardcoded IRQ headers.. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
The nommu patches broke the path for the common bits, get it building for the SH-3/4 case again. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
A number of API changes happened underneath the 7206 patches, update for everything that broke. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Yoshinori Sato 提交于
This adds support for the Solution Engine 7206 and 7619. Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Yoshinori Sato 提交于
Mostly SH-2 wrappers.. Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Yoshinori Sato 提交于
This splits out common bits from the existing exception handler for use between SH-2/SH-2A and SH-3/4, and adds support for the SH-2/2A exceptions. Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Yoshinori Sato 提交于
SH-2A has special division hardware as opposed to a full-fledged FPU, wire up the exception handlers for this. Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Yoshinori Sato 提交于
This implements initial support for the SH7206 (SH-2A) and SH7619 (SH-2) MMU-less CPUs. Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 05 12月, 2006 25 次提交
-
-
由 Matthew Wilcox 提交于
CONFIG_LBD and CONFIG_LSF are spread into asm/types.h for no particularly good reason. Centralising the definition in linux/types.h means that arch maintainers don't need to bother adding it, as well as fixing the problem with x86-64 users being asked to make a decision that has absolutely no effect. The H8/300 porters seem particularly confused since I'm not aware of any microcontrollers that need to support 2TB filesystems. Signed-off-by: NMatthew Wilcox <matthew@wil.cx> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
git://brick.kernel.dk/data/git/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block: [PATCH] blktrace: don't return blktrace_seq from trace_note() [PATCH] blktrace: uninline trace_note()
-
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (31 commits) ocfs2: implement i_op->permission configfs: make configfs_dirent_exists() static ocfs2: update file system paths to set atime ocfs2: core atime update functions ocfs2: Add splice support ocfs2: Remove ocfs2_write_should_remove_suid() [PATCH] Export should_remove_suid() configfs: mutex_lock_nested() fix ocfs2: Remove struct ocfs2_journal_handle in favor of handle_t ocfs2: remove handle argument to ocfs2_start_trans() ocfs2: remove ocfs2_journal_handle journal field ocfs2: pass ocfs2_super * into ocfs2_commit_trans() ocfs2: remove unused handle argument from ocfs2_meta_lock_full() ocfs2: make ocfs2_alloc_handle() static ocfs2: remove unused ocfs2_handle_add_lock() ocfs2: remove unused ocfs2_handle_add_inode() ocfs2: Don't allocate handle early in ocfs2_rename() ocfs2: don't use handle for locking in allocation functions ocfs2: don't pass handle to ocfs2_meta_lock in ocfs2_rename() ocfs2: don't pass handle to ocfs2_meta_lock in ocfs2_symlink() ...
-
由 Al Viro 提交于
ip_summed changes last summer had missed that one. As the result, we have ip_summed interpreted as CHECKSUM_PARTIAL now. IOW, ->csum is interpreted as offset of checksum in the packet. net/core/* will both read and modify the value as that offset, with obvious reasons. At the very least it's a remote memory corruptor. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Cleanup memory barriers for weakly ordered systems. [MIPS] Alchemy: Automatically enable CONFIG_RESOURCES_64BIT for PCI configs. [MIPS] Unify csum_partial.S [MIPS] SWARM: Fix a typo in #error directives [MIPS] Fix atomic.h build errors. [MIPS] Use SYSVIPC_COMPAT to fix various problems on N32 [MIPS] klconfig add missing bracket
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc: (194 commits) [POWERPC] Add missing EXPORTS for mpc52xx support [POWERPC] Remove obsolete PPC_52xx and update CLASSIC32 comment [POWERPC] ps3: add a default zImage target [POWERPC] Add of_platform_bus support to mpc52xx psc uart driver [POWERPC] typo fix and whitespace cleanup on mpc52xx-uart driver [POWERPC] Fix debug printks for 32-bit resources in the PCI code [POWERPC] Replace kmalloc+memset with kzalloc [POWERPC] Linkstation / kurobox support [POWERPC] Add the e300c3 core to the CPU table. [POWERPC] ppc: m48t35 add missing bracket [POWERPC] iSeries: don't build head_64.o unnecessarily [POWERPC] iSeries: stop dt_mod.o being rebuilt unnecessarily [POWERPC] Fix cputable.h for combined build [POWERPC] Allow CONFIG_BOOTX_TEXT on iSeries [POWERPC] Allow xmon to build on legacy iSeries [POWERPC] Change ppc64_defconfig to use AUTOFS_V4 not V3 [POWERPC] Tell firmware we can handle POWER6 compatible mode [POWERPC] Clean images in arch/powerpc/boot [POWERPC] Fix OF pci flags parsing [POWERPC] defconfig for lite5200 board ...
-
由 Grant Likely 提交于
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Grant Likely 提交于
The support for the 52xx-based systems is now included under CONFIG_CLASSIC32, since the 52xx chips have a 603e-based core. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geoff Levand 提交于
Add a powerpc make target that can be loaded by the ps3 bootloader (kboot) and set this as the default image to build for that platform. Until the compressed zImage wrapper is made, this arranges for a stripped vmlinux image to be built. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Grant Likely 提交于
Needed to support mpc52xx boards in arch/powerpc. This patch retains the platform_bus support when compiling for arch/ppc, but uses the of_platform bindings for arch/powerpc. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NSylvain Munaut <tnt@246tNt.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Grant Likely 提交于
Single typo fix and whitespace changes. In preparation for heavy changes to this driver when support for arch/powerpc is added. Since the driver will be changing significantly anyway, then may as well take the opportunity to clean it up first. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NSylvain Munaut <tnt@246tNt.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Ralf Baechle 提交于
Also the R4000 / R4600 LL/SC instructions imply a sync so no explicit sync needed. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
The 32-bit version and 64-bit version are almost equal. Unify them. This makes further improvements (for example, copying with parallel, supporting PREFETCH, etc.) easier. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Maciej W. Rozycki 提交于
This is a fix for a typo repeated several times in #error directives for invalid SiByte configurations. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
For the definition of atomic64_t atomic.h was relying on <asm/types.h> having been included previously. Before changeset d89d8e0637a5e4e0a12e90c4bc934d0d4c335239 this was happening as a side effect of including <linux/spinlock.h>. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
N32 SysV IPC system calls should use 32-bit compatible code. arch/mips/kernel/linux32.c have similar compatible code for O32, but ipc/compat.c seems more complete. We can use it for both N32 and O32. This patch should fix these problems (and other possible problems): http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=1149188824.6986.6.camel%40diimka-laptop http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=44C6B829.8050508%40caviumnetworks.comSigned-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Mariusz Kozlowski 提交于
Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (82 commits) [PATCH] pata_ali: small fixes [PATCH] pata_via: VIA 8251 bridged systems are now out and about [PATCH] trivial piix: swap bogus dot for comma space [PATCH] sata_promise: PHYMODE4 fixup [PATCH] libata: always use polling IDENTIFY [libata] pata_cs5535: fix build [PATCH] ahci: do not powerdown during initialization [PATCH] libata: prepare ata_sg_clean() for invocation from EH [PATCH] libata: separate out rw ATA taskfile building into ata_build_rw_tf() [PATCH] libata: implement ata_exec_internal_sg() [PATCH] libata: make sure IRQ is cleared after ata_bmdma_freeze() [PATCH] libata: move BMDMA host status recording from EH to interrupt handler [PATCH] libata: make sure sdev doesn't go away while rescanning [PATCH] libata: don't request sense if the port is frozen [PATCH] libata: fix READ CAPACITY simulation [PATCH] libata: implement ATA_FLAG_SETXFER_POLLING and use it in pata_via, take #2 [PATCH] libata: set IRQF_SHARED for legacy PCI IDE IRQs [PATCH] libata: remove unused HSM_ST_UNKNOWN [PATCH] libata: kill unnecessary sht->max_sectors initializations [PATCH] libata: add missing sht->slave_destroy ...
-
由 Alan 提交于
Switch to pci_get_bus_and_slot because some x86 systems seem to be handing us a device with dev->bus = NULL. Also don't apply the isa fixup to revision C6 and later of the chip. Really we need to work out wtf is handing us pdev->bus = NULL, but firstly and more importantly we need the drivers working. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Alan 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Alan 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Al Viro 提交于
OK, that seems to be enough to deal with the mess. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
This was exposed by Al's recent header file dependency reduction patches.. Cc: Al Viro <viro@ftp.linux.org.uk> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-