Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 15a4cb9c 编写于 作者: L Linus Torvalds
浏览文件
操作

Merge master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc 

* master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc: (194 commits)
  [POWERPC] Add missing EXPORTS for mpc52xx support
  [POWERPC] Remove obsolete PPC_52xx and update CLASSIC32 comment
  [POWERPC] ps3: add a default zImage target
  [POWERPC] Add of_platform_bus support to mpc52xx psc uart driver
  [POWERPC] typo fix and whitespace cleanup on mpc52xx-uart driver
  [POWERPC] Fix debug printks for 32-bit resources in the PCI code
  [POWERPC] Replace kmalloc+memset with kzalloc
  [POWERPC] Linkstation / kurobox support
  [POWERPC] Add the e300c3 core to the CPU table.
  [POWERPC] ppc: m48t35 add missing bracket
  [POWERPC] iSeries: don't build head_64.o unnecessarily
  [POWERPC] iSeries: stop dt_mod.o being rebuilt unnecessarily
  [POWERPC] Fix cputable.h for combined build
  [POWERPC] Allow CONFIG_BOOTX_TEXT on iSeries
  [POWERPC] Allow xmon to build on legacy iSeries
  [POWERPC] Change ppc64_defconfig to use AUTOFS_V4 not V3
  [POWERPC] Tell firmware we can handle POWER6 compatible mode
  [POWERPC] Clean images in arch/powerpc/boot
  [POWERPC] Fix OF pci flags parsing
  [POWERPC] defconfig for lite5200 board
  ...
上级 ff51a987 d8594d63
展开全部 隐藏空白更改
内联 并排
Showing with 25464 addition and 5051 deletion
Documentation/powerpc/booting-without-of.txt
浏览文件 @ 15a4cb9c
......@@ -6,6 +6,8 @@
IBM Corp.
(c) 2005 Becky Bruce <becky.bruce at freescale.com>,
Freescale Semiconductor, FSL SOC and 32-bit additions
(c) 2006 MontaVista Software, Inc.
Flash chip node definition
May 18, 2005: Rev 0.1 - Initial draft, no chapter III yet.
......@@ -1693,6 +1695,43 @@ platforms are moved over to use the flattened-device-tree model.
};
};
g) Flash chip nodes
Flash chips (Memory Technology Devices) are often used for solid state
file systems on embedded devices.
Required properties:
- device_type : has to be "rom"
- compatible : Should specify what this ROM device is compatible with
(i.e. "onenand"). Currently, this is most likely to be "direct-mapped"
(which corresponds to the MTD physmap mapping driver).
- regs : Offset and length of the register set (or memory mapping) for
the device.
Recommended properties :
- bank-width : Width of the flash data bus in bytes. Required
for the NOR flashes (compatible == "direct-mapped" and others) ONLY.
- partitions : Several pairs of 32-bit values where the first value is
partition's offset from the start of the device and the second one is
partition size in bytes with LSB used to signify a read only
partititon (so, the parition size should always be an even number).
- partition-names : The list of concatenated zero terminated strings
representing the partition names.
Example:
flash@ff000000 {
device_type = "rom";
compatible = "direct-mapped";
regs = <ff000000 01000000>;
bank-width = <4>;
partitions = <00000000 00f80000
00f80000 00080001>;
partition-names = "fs\0firmware";
};
More devices will be defined as this spec matures.
......
Documentation/powerpc/mpc52xx-device-tree-bindings.txt 0 → 100644
浏览文件 @ 15a4cb9c
MPC52xx Device Tree Bindings
----------------------------
(c) 2006 Secret Lab Technologies Ltd
Grant Likely <grant.likely at secretlab.ca>
I - Introduction
================
Boards supported by the arch/powerpc architecture require device tree be
passed by the boot loader to the kernel at boot time. The device tree
describes what devices are present on the board and how they are
connected. The device tree can either be passed as a binary blob (as
described in Documentation/powerpc/booting-without-of.txt), or passed
by Open Firmare (IEEE 1275) compatible firmware using an OF compatible
client interface API.
This document specifies the requirements on the device-tree for mpc52xx
based boards. These requirements are above and beyond the details
specified in either the OpenFirmware spec or booting-without-of.txt
All new mpc52xx-based boards are expected to match this document. In
cases where this document is not sufficient to support a new board port,
this document should be updated as part of adding the new board support.
II - Philosophy
===============
The core of this document is naming convention. The whole point of
defining this convention is to reduce or eliminate the number of
special cases required to support a 52xx board. If all 52xx boards
follow the same convention, then generic 52xx support code will work
rather than coding special cases for each new board.
This section tries to capture the thought process behind why the naming
convention is what it is.
1. Node names
-------------
There is strong convention/requirements already established for children
of the root node. 'cpus' describes the processor cores, 'memory'
describes memory, and 'chosen' provides boot configuration. Other nodes
are added to describe devices attached to the processor local bus.
Following convention already established with other system-on-chip
processors, MPC52xx boards must have an 'soc5200' node as a child of the
root node.
The soc5200 node holds child nodes for all on chip devices. Child nodes
are typically named after the configured function. ie. the FEC node is
named 'ethernet', and a PSC in uart mode is named 'serial'.
2. device_type property
-----------------------
similar to the node name convention above; the device_type reflects the
configured function of a device. ie. 'serial' for a uart and 'spi' for
an spi controller. However, while node names *should* reflect the
configured function, device_type *must* match the configured function
exactly.
3. compatible property
----------------------
Since device_type isn't enough to match devices to drivers, there also
needs to be a naming convention for the compatible property. Compatible
is an list of device descriptions sorted from specific to generic. For
the mpc52xx, the required format for each compatible value is
<chip>-<device>[-<mode>]. At the minimum, the list shall contain two
items; the first specifying the exact chip, and the second specifying
mpc52xx for the chip.
ie. ethernet on mpc5200b: compatible = "mpc5200b-ethernet\0mpc52xx-ethernet"
The idea here is that most drivers will match to the most generic field
in the compatible list (mpc52xx-*), but can also test the more specific
field for enabling bug fixes or extra features.
Modal devices, like PSCs, also append the configured function to the
end of the compatible field. ie. A PSC in i2s mode would specify
"mpc52xx-psc-i2s", not "mpc52xx-i2s". This convention is chosen to
avoid naming conflicts with non-psc devices providing the same
function. For example, "mpc52xx-spi" and "mpc52xx-psc-spi" describe
the mpc5200 simple spi device and a PSC spi mode respectively.
If the soc device is more generic and present on other SOCs, the
compatible property can specify the more generic device type also.
ie. mscan: compatible = "mpc5200-mscan\0mpc52xx-mscan\0fsl,mscan";
At the time of writing, exact chip may be either 'mpc5200' or
'mpc5200b'.
Device drivers should always try to match as generically as possible.
III - Structure
===============
The device tree for an mpc52xx board follows the structure defined in
booting-without-of.txt with the following additional notes:
0) the root node
----------------
Typical root description node; see booting-without-of
1) The cpus node
----------------
The cpus node follows the basic layout described in booting-without-of.
The bus-frequency property holds the XLB bus frequency
The clock-frequency property holds the core frequency
2) The memory node
------------------
Typical memory description node; see booting-without-of.
3) The soc5200 node
-------------------
This node describes the on chip SOC peripherals. Every mpc52xx based
board will have this node, and as such there is a common naming
convention for SOC devices.
Required properties:
name type description
---- ---- -----------
device_type string must be "soc"
ranges int should be <0 baseaddr baseaddr+10000>
reg int must be <baseaddr 10000>
Recommended properties:
name type description
---- ---- -----------
compatible string should be "<chip>-soc\0mpc52xx-soc"
ie. "mpc5200b-soc\0mpc52xx-soc"
#interrupt-cells int must be <3>. If it is not defined
here then it must be defined in every
soc device node.
bus-frequency int IPB bus frequency in HZ. Clock rate
used by most of the soc devices.
Defining it here avoids needing it
added to every device node.
4) soc5200 child nodes
----------------------
Any on chip SOC devices available to Linux must appear as soc5200 child nodes.
Note: in the tables below, '*' matches all <chip> values. ie.
*-pic would translate to "mpc5200-pic\0mpc52xx-pic"
Required soc5200 child nodes:
name device_type compatible Description
---- ----------- ---------- -----------
cdm@<addr> cdm *-cmd Clock Distribution
pic@<addr> interrupt-controller *-pic need an interrupt
controller to boot
bestcomm@<addr> dma-controller *-bestcomm 52xx pic also requires
the bestcomm device
Recommended soc5200 child nodes; populate as needed for your board
name device_type compatible Description
---- ----------- ---------- -----------
gpt@<addr> gpt *-gpt General purpose timers
rtc@<addr> rtc *-rtc Real time clock
mscan@<addr> mscan *-mscan CAN bus controller
pci@<addr> pci *-pci PCI bridge
serial@<addr> serial *-psc-uart PSC in serial mode
i2s@<addr> i2s *-psc-i2s PSC in i2s mode
ac97@<addr> ac97 *-psc-ac97 PSC in ac97 mode
spi@<addr> spi *-psc-spi PSC in spi mode
irda@<addr> irda *-psc-irda PSC in IrDA mode
spi@<addr> spi *-spi MPC52xx spi device
ethernet@<addr> network *-fec MPC52xx ethernet device
ata@<addr> ata *-ata IDE ATA interface
i2c@<addr> i2c *-i2c I2C controller
usb@<addr> usb-ohci-be *-ohci,ohci-be USB controller
xlb@<addr> xlb *-xlb XLB arbritrator
IV - Extra Notes
================
1. Interrupt mapping
--------------------
The mpc52xx pic driver splits hardware IRQ numbers into two levels. The
split reflects the layout of the PIC hardware itself, which groups
interrupts into one of three groups; CRIT, MAIN or PERP. Also, the
Bestcomm dma engine has it's own set of interrupt sources which are
cascaded off of peripheral interrupt 0, which the driver interprets as a
fourth group, SDMA.
The interrupts property for device nodes using the mpc52xx pic consists
of three cells; <L1 L2 level>
L1 := [CRIT=0, MAIN=1, PERP=2, SDMA=3]
L2 := interrupt number; directly mapped from the value in the
"ICTL PerStat, MainStat, CritStat Encoded Register"
level := [LEVEL_HIGH=0, EDGE_RISING=1, EDGE_FALLING=2, LEVEL_LOW=3]
MAINTAINERS
浏览文件 @ 15a4cb9c
......@@ -2438,6 +2438,13 @@ M: promise@pnd-pc.demon.co.uk
W: http://www.pnd-pc.demon.co.uk/promise/
S: Maintained
PS3 PLATFORM SUPPORT
P: Geoff Levand
M: geoffrey.levand@am.sony.com
L: linuxppc-dev@ozlabs.org
L: cbe-oss-dev@ozlabs.org
S: Supported
PVRUSB2 VIDEO4LINUX DRIVER
P: Mike Isely
M: isely@pobox.com
......
arch/powerpc/Kconfig
浏览文件 @ 15a4cb9c
......@@ -112,7 +112,7 @@ choice
default 6xx
config CLASSIC32
bool "6xx/7xx/74xx"
bool "52xx/6xx/7xx/74xx"
select PPC_FPU
select 6xx
help
......@@ -121,16 +121,18 @@ config CLASSIC32
versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the AMCC
embedded versions (403 and 405) and the high end 64 bit Power
processors (POWER 3, POWER4, and IBM PPC970 also known as G5).
This option is the catch-all for 6xx types, including some of the
embedded versions. Unless there is see an option for the specific
chip family you are using, you want this option.
You do not want this if you are building a kernel for a 64 bit
IBM RS/6000 or an Apple G5, choose 6xx.
If unsure, select this option
Unless you are building a kernel for one of the embedded processor
systems, 64 bit IBM RS/6000 or an Apple G5, choose 6xx.
Note that the kernel runs in 32-bit mode even on 64-bit chips.
config PPC_52xx
bool "Freescale 52xx"
select 6xx
select PPC_FPU
config PPC_82xx
bool "Freescale 82xx"
select 6xx
......@@ -160,9 +162,11 @@ config PPC_86xx
config 40x
bool "AMCC 40x"
select PPC_DCR_NATIVE
config 44x
bool "AMCC 44x"
select PPC_DCR_NATIVE
config 8xx
bool "Freescale 8xx"
......@@ -208,6 +212,24 @@ config PPC_FPU
bool
default y if PPC64
config PPC_DCR_NATIVE
bool
default n
config PPC_DCR_MMIO
bool
default n
config PPC_DCR
bool
depends on PPC_DCR_NATIVE || PPC_DCR_MMIO
default y
config PPC_OF_PLATFORM_PCI
bool
depends on PPC64 # not supported on 32 bits yet
default n
config BOOKE
bool
depends on E200 || E500
......@@ -227,6 +249,7 @@ config PTE_64BIT
config PHYS_64BIT
bool 'Large physical address support' if E500
depends on 44x || E500
select RESOURCES_64BIT
default y if 44x
---help---
This option enables kernel support for larger than 32-bit physical
......@@ -369,11 +392,13 @@ config PPC_PSERIES
select PPC_RTAS
select RTAS_ERROR_LOGGING
select PPC_UDBG_16550
select PPC_NATIVE
default y
config PPC_ISERIES
bool "IBM Legacy iSeries"
depends on PPC_MULTIPLATFORM && PPC64
select PPC_INDIRECT_IO
config PPC_CHRP
bool "Common Hardware Reference Platform (CHRP) based machines"
......@@ -384,14 +409,35 @@ config PPC_CHRP
select PPC_RTAS
select PPC_MPC106
select PPC_UDBG_16550
select PPC_NATIVE
default y
config PPC_MPC52xx
bool
default n
config PPC_EFIKA
bool "bPlan Efika 5k2. MPC5200B based computer"
depends on PPC_MULTIPLATFORM && PPC32
select PPC_RTAS
select RTAS_PROC
select PPC_MPC52xx
select PPC_NATIVE
default y
config PPC_LITE5200
bool "Freescale Lite5200 Eval Board"
depends on PPC_MULTIPLATFORM && PPC32
select PPC_MPC52xx
default n
config PPC_PMAC
bool "Apple PowerMac based machines"
depends on PPC_MULTIPLATFORM
select MPIC
select PPC_INDIRECT_PCI if PPC32
select PPC_MPC106 if PPC32
select PPC_NATIVE
default y
config PPC_PMAC64
......@@ -411,6 +457,7 @@ config PPC_PREP
select PPC_I8259
select PPC_INDIRECT_PCI
select PPC_UDBG_16550
select PPC_NATIVE
default y
config PPC_MAPLE
......@@ -422,6 +469,7 @@ config PPC_MAPLE
select GENERIC_TBSYNC
select PPC_UDBG_16550
select PPC_970_NAP
select PPC_NATIVE
default n
help
This option enables support for the Maple 970FX Evaluation Board.
......@@ -434,6 +482,7 @@ config PPC_PASEMI
select MPIC
select PPC_UDBG_16550
select GENERIC_TBSYNC
select PPC_NATIVE
help
This option enables support for PA Semi's PWRficient line
of SoC processors, including PA6T-1682M
......@@ -445,6 +494,11 @@ config PPC_CELL
config PPC_CELL_NATIVE
bool
select PPC_CELL
select PPC_DCR_MMIO
select PPC_OF_PLATFORM_PCI
select PPC_INDIRECT_IO
select PPC_NATIVE
select MPIC
default n
config PPC_IBM_CELL_BLADE
......@@ -456,6 +510,22 @@ config PPC_IBM_CELL_BLADE
select PPC_UDBG_16550
select UDBG_RTAS_CONSOLE
config PPC_PS3
bool "Sony PS3"
depends on PPC_MULTIPLATFORM && PPC64
select PPC_CELL
help
This option enables support for the Sony PS3 game console
and other platforms using the PS3 hypervisor.
config PPC_NATIVE
bool
depends on PPC_MULTIPLATFORM
help
Support for running natively on the hardware, i.e. without
a hypervisor. This option is not user-selectable but should
be selected by all platforms that need it.
config UDBG_RTAS_CONSOLE
bool "RTAS based debug console"
depends on PPC_RTAS
......@@ -517,6 +587,15 @@ config PPC_970_NAP
bool
default n
config PPC_INDIRECT_IO
bool
select GENERIC_IOMAP
default n
config GENERIC_IOMAP
bool
default n
source "drivers/cpufreq/Kconfig"
config CPU_FREQ_PMAC
......@@ -594,12 +673,6 @@ config TAU_AVERAGE
If in doubt, say N here.
config PPC_TODC
depends on EMBEDDED6xx
bool "Generic Time-of-day Clock (TODC) support"
---help---
This adds support for many TODC/RTC chips.
endmenu
source arch/powerpc/platforms/embedded6xx/Kconfig
......@@ -610,6 +683,7 @@ source arch/powerpc/platforms/85xx/Kconfig
source arch/powerpc/platforms/86xx/Kconfig
source arch/powerpc/platforms/8xx/Kconfig
source arch/powerpc/platforms/cell/Kconfig
source arch/powerpc/platforms/ps3/Kconfig
menu "Kernel options"
......@@ -790,7 +864,6 @@ source "arch/powerpc/platforms/prep/Kconfig"
config CMDLINE_BOOL
bool "Default bootloader kernel arguments"
depends on !PPC_ISERIES
config CMDLINE
string "Initial kernel command string"
......@@ -880,7 +953,7 @@ config MCA
config PCI
bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx \
|| PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) || MPC7448HPC2
|| PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) || MPC7448HPC2 || PPC_PS3
default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx \
&& !PPC_85xx && !PPC_86xx
default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
......
arch/powerpc/Kconfig.debug
浏览文件 @ 15a4cb9c
......@@ -77,7 +77,7 @@ config KGDB_CONSOLE
config XMON
bool "Include xmon kernel debugger"
depends on DEBUGGER && !PPC_ISERIES
depends on DEBUGGER
help
Include in-kernel hooks for the xmon kernel monitor/debugger.
Unless you are intending to debug the kernel, say N here.
......@@ -98,6 +98,15 @@ config XMON_DEFAULT
xmon is normally disabled unless booted with 'xmon=on'.
Use 'xmon=off' to disable xmon init during runtime.
config XMON_DISASSEMBLY
bool "Include disassembly support in xmon"
depends on XMON
default y
help
Include support for disassembling in xmon. You probably want
to say Y here, unless you're building for a memory-constrained
system.
config IRQSTACKS
bool "Use separate kernel stacks when processing interrupts"
depends on PPC64
......@@ -116,7 +125,7 @@ config BDI_SWITCH
config BOOTX_TEXT
bool "Support for early boot text console (BootX or OpenFirmware only)"
depends PPC_OF && !PPC_ISERIES
depends PPC_OF
help
Say Y here to see progress messages from the boot firmware in text
mode. Requires either BootX or Open Firmware.
......
arch/powerpc/boot/.gitignore
浏览文件 @ 15a4cb9c
addnote
empty.c
hack-coff
infblock.c
infblock.h
infcodes.c
infcodes.h
inffast.c
inffast.h
inffixed.h
inflate.c
inflate.h
inftrees.c
inftrees.h
infutil.c
infutil.h
kernel-vmlinux.strip.c
kernel-vmlinux.strip.gz
mktree
uImage
zImage
zImage.chrp
zImage.coff
zImage.coff.lds
zImage.lds
zImage.miboot
zImage.pmac
zImage.pseries
zImage.sandpoint
zImage.vmode
zconf.h
zlib.h
......
arch/powerpc/boot/Makefile
浏览文件 @ 15a4cb9c
......@@ -40,7 +40,8 @@ zliblinuxheader := zlib.h zconf.h zutil.h
$(addprefix $(obj)/,$(zlib) main.o): $(addprefix $(obj)/,$(zliblinuxheader)) \
$(addprefix $(obj)/,$(zlibheader))
src-wlib := string.S stdio.c main.c div64.S $(zlib)
src-wlib := string.S stdio.c main.c flatdevtree.c flatdevtree_misc.c \
ns16550.c serial.c simple_alloc.c div64.S util.S $(zlib)
src-plat := of.c
src-boot := crt0.S $(src-wlib) $(src-plat) empty.c
......@@ -74,7 +75,7 @@ $(obj)/zImage.lds $(obj)/zImage.coff.lds: $(obj)/%: $(srctree)/$(src)/%.S
@cp $< $@
clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \
$(obj)/empty.c
empty.c zImage zImage.coff.lds zImage.lds zImage.sandpoint
quiet_cmd_bootcc = BOOTCC $@
cmd_bootcc = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $<
......@@ -93,13 +94,13 @@ $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S
$(obj)/wrapper.a: $(obj-wlib)
$(call cmd,bootar)
hostprogs-y := addnote addRamDisk hack-coff
hostprogs-y := addnote addRamDisk hack-coff mktree
extra-y := $(obj)/crt0.o $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
$(obj)/zImage.lds $(obj)/zImage.coff.lds
wrapper :=$(srctree)/$(src)/wrapper
wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff)
wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree)
#############
# Bits for building various flavours of zImage
......@@ -148,13 +149,18 @@ $(obj)/zImage.miboot: vmlinux $(wrapperbits)
$(obj)/zImage.initrd.miboot: vmlinux $(wrapperbits)
$(call cmd,wrap_initrd,miboot)
$(obj)/zImage.ps3: vmlinux
$(STRIP) -s -R .comment $< -o $@
$(obj)/uImage: vmlinux $(wrapperbits)
$(call cmd,wrap,uboot)
image-$(CONFIG_PPC_PSERIES) += zImage.pseries
image-$(CONFIG_PPC_MAPLE) += zImage.pseries
image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries
image-$(CONFIG_PPC_PS3) += zImage.ps3
image-$(CONFIG_PPC_CHRP) += zImage.chrp
image-$(CONFIG_PPC_EFIKA) += zImage.chrp
image-$(CONFIG_PPC_PMAC) += zImage.pmac
image-$(CONFIG_DEFAULT_UIMAGE) += uImage
......@@ -176,3 +182,4 @@ install: $(CONFIGURE) $(image-y)
clean-files += $(addprefix $(objtree)/, $(obj-boot) vmlinux.strip.gz)
clean-files += $(addprefix $(objtree)/, $(obj-boot) vmlinux.bin.gz)
clean-files += $(image-)
arch/powerpc/boot/dts/kuroboxHG.dts 0 → 100644
浏览文件 @ 15a4cb9c
/*
* Device Tree Souce for Buffalo KuroboxHG
*
* Choose CONFIG_LINKSTATION to build a kernel for KuroboxHG, or use
* the default configuration linkstation_defconfig.
*
* Based on sandpoint.dts
*
* 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de>
*
* This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
XXXX add flash parts, rtc, ??
build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts"
*/
/ {
linux,phandle = <1000>;
model = "KuroboxHG";
compatible = "linkstation";
#address-cells = <1>;
#size-cells = <1>;
cpus {
linux,phandle = <2000>;
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
PowerPC,603e { /* Really 8241 */
linux,phandle = <2100>;
linux,boot-cpu;
device_type = "cpu";
reg = <0>;
clock-frequency = <fdad680>; /* Fixed by bootwrapper */
timebase-frequency = <1F04000>; /* Fixed by bootwrapper */
bus-frequency = <0>; /* From bootloader */
/* Following required by dtc but not used */
i-cache-line-size = <0>;
d-cache-line-size = <0>;
i-cache-size = <4000>;
d-cache-size = <4000>;
};
};
memory {
linux,phandle = <3000>;
device_type = "memory";
reg = <00000000 08000000>;
};
soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
linux,phandle = <4000>;
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
device_type = "soc";
compatible = "mpc10x";
store-gathering = <0>; /* 0 == off, !0 == on */
reg = <80000000 00100000>;
ranges = <80000000 80000000 70000000 /* pci mem space */
fc000000 fc000000 00100000 /* EUMB */
fe000000 fe000000 00c00000 /* pci i/o space */
fec00000 fec00000 00300000 /* pci cfg regs */
fef00000 fef00000 00100000>; /* pci iack */
i2c@80003000 {
linux,phandle = <4300>;
device_type = "i2c";
compatible = "fsl-i2c";
reg = <80003000 1000>;
interrupts = <5 2>;
interrupt-parent = <4400>;
};
serial@80004500 {
linux,phandle = <4511>;
device_type = "serial";
compatible = "ns16550";
reg = <80004500 8>;
clock-frequency = <7c044a8>;
current-speed = <2580>;
interrupts = <9 2>;
interrupt-parent = <4400>;
};
serial@80004600 {
linux,phandle = <4512>;
device_type = "serial";
compatible = "ns16550";
reg = <80004600 8>;
clock-frequency = <7c044a8>;
current-speed = <e100>;
interrupts = <a 0>;
interrupt-parent = <4400>;
};
pic@80040000 {
linux,phandle = <4400>;
#interrupt-cells = <2>;
#address-cells = <0>;
device_type = "open-pic";
compatible = "chrp,open-pic";
interrupt-controller;
reg = <80040000 40000>;
built-in;
};
pci@fec00000 {
linux,phandle = <4500>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
device_type = "pci";
compatible = "mpc10x-pci";
reg = <fec00000 400000>;
ranges = <01000000 0 0 fe000000 0 00c00000
02000000 0 80000000 80000000 0 70000000>;
bus-range = <0 ff>;
clock-frequency = <7f28155>;
interrupt-parent = <4400>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 - IRQ0 ETH */
5800 0 0 1 4400 0 1
5800 0 0 2 4400 1 1
5800 0 0 3 4400 2 1
5800 0 0 4 4400 3 1
/* IDSEL 0x12 - IRQ1 IDE0 */
6000 0 0 1 4400 1 1
6000 0 0 2 4400 2 1
6000 0 0 3 4400 3 1
6000 0 0 4 4400 0 1
/* IDSEL 0x14 - IRQ3 USB2.0 */
7000 0 0 1 4400 3 1
7000 0 0 2 4400 3 1
7000 0 0 3 4400 3 1
7000 0 0 4 4400 3 1
>;
};
};
};
arch/powerpc/boot/dts/lite5200.dts 0 → 100644
浏览文件 @ 15a4cb9c
/*
* Lite5200 board Device Tree Source
*
* Copyright 2006 Secret Lab Technologies Ltd.
* Grant Likely <grant.likely@secretlab.ca>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/ {
model = "Lite5200";
compatible = "lite5200\0lite52xx\0mpc5200\0mpc52xx";
#address-cells = <1>;
#size-cells = <1>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
PowerPC,5200@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <20>;
i-cache-line-size = <20>;
d-cache-size = <4000>; // L1, 16K
i-cache-size = <4000>; // L1, 16K
timebase-frequency = <0>; // from bootloader
bus-frequency = <0>; // from bootloader
clock-frequency = <0>; // from bootloader
32-bit;
};
};
memory {
device_type = "memory";
reg = <00000000 04000000>; // 64MB
};
soc5200@f0000000 {
#interrupt-cells = <3>;
device_type = "soc";
ranges = <0 f0000000 f0010000>;
reg = <f0000000 00010000>;
bus-frequency = <0>; // from bootloader
cdm@200 {
compatible = "mpc5200-cdm\0mpc52xx-cdm";
reg = <200 38>;
};
pic@500 {
// 5200 interrupts are encoded into two levels;
linux,phandle = <500>;
interrupt-controller;
#interrupt-cells = <3>;
device_type = "interrupt-controller";
compatible = "mpc5200-pic\0mpc52xx-pic";
reg = <500 80>;
built-in;
};
gpt@600 { // General Purpose Timer
compatible = "mpc5200-gpt\0mpc52xx-gpt";
device_type = "gpt";
reg = <600 10>;
interrupts = <1 9 0>;
interrupt-parent = <500>;
};
gpt@610 { // General Purpose Timer
compatible = "mpc5200-gpt\0mpc52xx-gpt";
device_type = "gpt";
reg = <610 10>;
interrupts = <1 a 0>;
interrupt-parent = <500>;
};
gpt@620 { // General Purpose Timer
compatible = "mpc5200-gpt\0mpc52xx-gpt";
device_type = "gpt";
reg = <620 10>;
interrupts = <1 b 0>;
interrupt-parent = <500>;
};
gpt@630 { // General Purpose Timer
compatible = "mpc5200-gpt\0mpc52xx-gpt";
device_type = "gpt";
reg = <630 10>;
interrupts = <1 c 0>;
interrupt-parent = <500>;
};
gpt@640 { // General Purpose Timer
compatible = "mpc5200-gpt\0mpc52xx-gpt";
device_type = "gpt";
reg = <640 10>;
interrupts = <1 d 0>;
interrupt-parent = <500>;
};
gpt@650 { // General Purpose Timer
compatible = "mpc5200-gpt\0mpc52xx-gpt";
device_type = "gpt";
reg = <650 10>;
interrupts = <1 e 0>;
interrupt-parent = <500>;
};
gpt@660 { // General Purpose Timer
compatible = "mpc5200-gpt\0mpc52xx-gpt";
device_type = "gpt";
reg = <660 10>;
interrupts = <1 f 0>;
interrupt-parent = <500>;
};
gpt@670 { // General Purpose Timer
compatible = "mpc5200-gpt\0mpc52xx-gpt";
device_type = "gpt";
reg = <670 10>;
interrupts = <1 10 0>;
interrupt-parent = <500>;
};
rtc@800 { // Real time clock
compatible = "mpc5200-rtc\0mpc52xx-rtc";
device_type = "rtc";
reg = <800 100>;
interrupts = <1 5 0 1 6 0>;
interrupt-parent = <500>;
};
mscan@900 {
device_type = "mscan";
compatible = "mpc5200-mscan\0mpc52xx-mscan";
interrupts = <2 11 0>;
interrupt-parent = <500>;
reg = <900 80>;
};
mscan@980 {
device_type = "mscan";
compatible = "mpc5200-mscan\0mpc52xx-mscan";
interrupts = <1 12 0>;
interrupt-parent = <500>;
reg = <980 80>;
};
gpio@b00 {
compatible = "mpc5200-gpio\0mpc52xx-gpio";
reg = <b00 40>;
interrupts = <1 7 0>;
interrupt-parent = <500>;
};
gpio-wkup@b00 {
compatible = "mpc5200-gpio-wkup\0mpc52xx-gpio-wkup";
reg = <c00 40>;
interrupts = <1 8 0 0 3 0>;
interrupt-parent = <500>;
};
pci@0d00 {
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
compatible = "mpc5200-pci\0mpc52xx-pci";
reg = <d00 100>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <c000 0 0 1 500 0 0 3
c000 0 0 2 500 0 0 3
c000 0 0 3 500 0 0 3
c000 0 0 4 500 0 0 3>;
clock-frequency = <0>; // From boot loader
interrupts = <2 8 0 2 9 0 2 a 0>;
interrupt-parent = <500>;
bus-range = <0 0>;
ranges = <42000000 0 80000000 80000000 0 20000000
02000000 0 a0000000 a0000000 0 10000000
01000000 0 00000000 b0000000 0 01000000>;
};
spi@f00 {
device_type = "spi";
compatible = "mpc5200-spi\0mpc52xx-spi";
reg = <f00 20>;
interrupts = <2 d 0 2 e 0>;
interrupt-parent = <500>;
};
usb@1000 {
device_type = "usb-ohci-be";
compatible = "mpc5200-ohci\0mpc52xx-ohci\0ohci-be";
reg = <1000 ff>;
interrupts = <2 6 0>;
interrupt-parent = <500>;
};
bestcomm@1200 {
device_type = "dma-controller";
compatible = "mpc5200-bestcomm\0mpc52xx-bestcomm";
reg = <1200 80>;
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
3 4 0 3 5 0 3 6 0 3 7 0
3 8 0 3 9 0 3 a 0 3 b 0
3 c 0 3 d 0 3 e 0 3 f 0>;
interrupt-parent = <500>;
};
xlb@1f00 {
compatible = "mpc5200-xlb\0mpc52xx-xlb";
reg = <1f00 100>;
};
serial@2000 { // PSC1
device_type = "serial";
compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart";
port-number = <0>; // Logical port assignment
reg = <2000 100>;
interrupts = <2 1 0>;
interrupt-parent = <500>;
};
// PSC2 in spi mode example
spi@2200 { // PSC2
device_type = "spi";
compatible = "mpc5200-psc-spi\0mpc52xx-psc-spi";
reg = <2200 100>;
interrupts = <2 2 0>;
interrupt-parent = <500>;
};
// PSC3 in CODEC mode example
i2s@2400 { // PSC3
device_type = "i2s";
compatible = "mpc5200-psc-i2s\0mpc52xx-psc-i2s";
reg = <2400 100>;
interrupts = <2 3 0>;
interrupt-parent = <500>;
};
// PSC4 unconfigured
//serial@2600 { // PSC4
// device_type = "serial";
// compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart";
// reg = <2600 100>;
// interrupts = <2 b 0>;
// interrupt-parent = <500>;
//};
// PSC5 unconfigured
//serial@2800 { // PSC5
// device_type = "serial";
// compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart";
// reg = <2800 100>;
// interrupts = <2 c 0>;
// interrupt-parent = <500>;
//};
// PSC6 in AC97 mode example
ac97@2c00 { // PSC6
device_type = "ac97";
compatible = "mpc5200-psc-ac97\0mpc52xx-psc-ac97";
reg = <2c00 100>;
interrupts = <2 4 0>;
interrupt-parent = <500>;
};
ethernet@3000 {
device_type = "network";
compatible = "mpc5200-fec\0mpc52xx-fec";
reg = <3000 800>;
mac-address = [ 02 03 04 05 06 07 ]; // Bad!
interrupts = <2 5 0>;
interrupt-parent = <500>;
};
ata@3a00 {
device_type = "ata";
compatible = "mpc5200-ata\0mpc52xx-ata";
reg = <3a00 100>;
interrupts = <2 7 0>;
interrupt-parent = <500>;
};
i2c@3d00 {
device_type = "i2c";
compatible = "mpc5200-i2c\0mpc52xx-i2c";
reg = <3d00 40>;
interrupts = <2 f 0>;
interrupt-parent = <500>;
};
i2c@3d40 {
device_type = "i2c";
compatible = "mpc5200-i2c\0mpc52xx-i2c";
reg = <3d40 40>;
interrupts = <2 10 0>;
interrupt-parent = <500>;
};
sram@8000 {
device_type = "sram";
compatible = "mpc5200-sram\0mpc52xx-sram\0sram";
reg = <8000 4000>;
};
};
};
arch/powerpc/boot/dts/lite5200b.dts 0 → 100644
浏览文件 @ 15a4cb9c
/*
* Lite5200B board Device Tree Source
*
* Copyright 2006 Secret Lab Technologies Ltd.
* Grant Likely <grant.likely@secretlab.ca>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/ {
model = "Lite5200b";
compatible = "lite5200b\0lite52xx\0mpc5200b\0mpc52xx";
#address-cells = <1>;
#size-cells = <1>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
PowerPC,5200@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <20>;
i-cache-line-size = <20>;
d-cache-size = <4000>; // L1, 16K
i-cache-size = <4000>; // L1, 16K
timebase-frequency = <0>; // from bootloader
bus-frequency = <0>; // from bootloader
clock-frequency = <0>; // from bootloader
32-bit;
};
};
memory {
device_type = "memory";
reg = <00000000 10000000>; // 256MB
};
soc5200@f0000000 {
#interrupt-cells = <3>;
device_type = "soc";
ranges = <0 f0000000 f0010000>;
reg = <f0000000 00010000>;
bus-frequency = <0>; // from bootloader
cdm@200 {
compatible = "mpc5200b-cdm\0mpc52xx-cdm";
reg = <200 38>;
};
pic@500 {
// 5200 interrupts are encoded into two levels;
linux,phandle = <500>;
interrupt-controller;
#interrupt-cells = <3>;
device_type = "interrupt-controller";
compatible = "mpc5200b-pic\0mpc52xx-pic";
reg = <500 80>;
built-in;
};
gpt@600 { // General Purpose Timer
compatible = "mpc5200b-gpt\0mpc52xx-gpt";
device_type = "gpt";
reg = <600 10>;
interrupts = <1 9 0>;
interrupt-parent = <500>;
};
gpt@610 { // General Purpose Timer
compatible = "mpc5200b-gpt\0mpc52xx-gpt";
device_type = "gpt";
reg = <610 10>;
interrupts = <1 a 0>;
interrupt-parent = <500>;
};
gpt@620 { // General Purpose Timer
compatible = "mpc5200b-gpt\0mpc52xx-gpt";
device_type = "gpt";
reg = <620 10>;
interrupts = <1 b 0>;
interrupt-parent = <500>;
};
gpt@630 { // General Purpose Timer
compatible = "mpc5200b-gpt\0mpc52xx-gpt";
device_type = "gpt";
reg = <630 10>;
interrupts = <1 c 0>;
interrupt-parent = <500>;
};
gpt@640 { // General Purpose Timer
compatible = "mpc5200b-gpt\0mpc52xx-gpt";
device_type = "gpt";
reg = <640 10>;
interrupts = <1 d 0>;
interrupt-parent = <500>;
};
gpt@650 { // General Purpose Timer
compatible = "mpc5200b-gpt\0mpc52xx-gpt";
device_type = "gpt";
reg = <650 10>;
interrupts = <1 e 0>;
interrupt-parent = <500>;
};
gpt@660 { // General Purpose Timer
compatible = "mpc5200b-gpt\0mpc52xx-gpt";
device_type = "gpt";
reg = <660 10>;
interrupts = <1 f 0>;
interrupt-parent = <500>;
};
gpt@670 { // General Purpose Timer
compatible = "mpc5200b-gpt\0mpc52xx-gpt";
device_type = "gpt";
reg = <670 10>;
interrupts = <1 10 0>;
interrupt-parent = <500>;
};
rtc@800 { // Real time clock
compatible = "mpc5200b-rtc\0mpc52xx-rtc";
device_type = "rtc";
reg = <800 100>;
interrupts = <1 5 0 1 6 0>;
interrupt-parent = <500>;
};
mscan@900 {
device_type = "mscan";
compatible = "mpc5200b-mscan\0mpc52xx-mscan";
interrupts = <2 11 0>;
interrupt-parent = <500>;
reg = <900 80>;
};
mscan@980 {
device_type = "mscan";
compatible = "mpc5200b-mscan\0mpc52xx-mscan";
interrupts = <1 12 0>;
interrupt-parent = <500>;
reg = <980 80>;
};
gpio@b00 {
compatible = "mpc5200b-gpio\0mpc52xx-gpio";
reg = <b00 40>;
interrupts = <1 7 0>;
interrupt-parent = <500>;
};
gpio-wkup@b00 {
compatible = "mpc5200b-gpio-wkup\0mpc52xx-gpio-wkup";
reg = <c00 40>;
interrupts = <1 8 0 0 3 0>;
interrupt-parent = <500>;
};
pci@0d00 {
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
compatible = "mpc5200b-pci\0mpc52xx-pci";
reg = <d00 100>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <c000 0 0 1 500 0 0 3 // 1st slot
c000 0 0 2 500 1 1 3
c000 0 0 3 500 1 2 3
c000 0 0 4 500 1 3 3
c800 0 0 1 500 1 1 3 // 2nd slot
c800 0 0 2 500 1 2 3
c800 0 0 3 500 1 3 3
c800 0 0 4 500 0 0 3>;
clock-frequency = <0>; // From boot loader
interrupts = <2 8 0 2 9 0 2 a 0>;
interrupt-parent = <500>;
bus-range = <0 0>;
ranges = <42000000 0 80000000 80000000 0 20000000
02000000 0 a0000000 a0000000 0 10000000
01000000 0 00000000 b0000000 0 01000000>;
};
spi@f00 {
device_type = "spi";
compatible = "mpc5200b-spi\0mpc52xx-spi";
reg = <f00 20>;
interrupts = <2 d 0 2 e 0>;
interrupt-parent = <500>;
};
usb@1000 {
device_type = "usb-ohci-be";
compatible = "mpc5200b-ohci\0mpc52xx-ohci\0ohci-be";
reg = <1000 ff>;
interrupts = <2 6 0>;
interrupt-parent = <500>;
};
bestcomm@1200 {
device_type = "dma-controller";
compatible = "mpc5200b-bestcomm\0mpc52xx-bestcomm";
reg = <1200 80>;
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
3 4 0 3 5 0 3 6 0 3 7 0
3 8 0 3 9 0 3 a 0 3 b 0
3 c 0 3 d 0 3 e 0 3 f 0>;
interrupt-parent = <500>;
};
xlb@1f00 {
compatible = "mpc5200b-xlb\0mpc52xx-xlb";
reg = <1f00 100>;
};
serial@2000 { // PSC1
device_type = "serial";
compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart";
port-number = <0>; // Logical port assignment
reg = <2000 100>;
interrupts = <2 1 0>;
interrupt-parent = <500>;
};
// PSC2 in spi mode example
spi@2200 { // PSC2
device_type = "spi";
compatible = "mpc5200b-psc-spi\0mpc52xx-psc-spi";
reg = <2200 100>;
interrupts = <2 2 0>;
interrupt-parent = <500>;
};
// PSC3 in CODEC mode example
i2s@2400 { // PSC3
device_type = "i2s";
compatible = "mpc5200b-psc-i2s\0mpc52xx-psc-i2s";
reg = <2400 100>;
interrupts = <2 3 0>;
interrupt-parent = <500>;
};
// PSC4 unconfigured
//serial@2600 { // PSC4
// device_type = "serial";
// compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart";
// reg = <2600 100>;
// interrupts = <2 b 0>;
// interrupt-parent = <500>;
//};
// PSC5 unconfigured
//serial@2800 { // PSC5
// device_type = "serial";
// compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart";
// reg = <2800 100>;
// interrupts = <2 c 0>;
// interrupt-parent = <500>;
//};
// PSC6 in AC97 mode example
ac97@2c00 { // PSC6
device_type = "ac97";
compatible = "mpc5200b-psc-ac97\0mpc52xx-psc-ac97";
reg = <2c00 100>;
interrupts = <2 4 0>;
interrupt-parent = <500>;
};
ethernet@3000 {
device_type = "network";
compatible = "mpc5200b-fec\0mpc52xx-fec";
reg = <3000 800>;
mac-address = [ 02 03 04 05 06 07 ]; // Bad!
interrupts = <2 5 0>;
interrupt-parent = <500>;
};
ata@3a00 {
device_type = "ata";
compatible = "mpc5200b-ata\0mpc52xx-ata";
reg = <3a00 100>;
interrupts = <2 7 0>;
interrupt-parent = <500>;
};
i2c@3d00 {
device_type = "i2c";
compatible = "mpc5200b-i2c\0mpc52xx-i2c";
reg = <3d00 40>;
interrupts = <2 f 0>;
interrupt-parent = <500>;
};
i2c@3d40 {
device_type = "i2c";
compatible = "mpc5200b-i2c\0mpc52xx-i2c";
reg = <3d40 40>;
interrupts = <2 10 0>;
interrupt-parent = <500>;
};
sram@8000 {
device_type = "sram";
compatible = "mpc5200b-sram\0mpc52xx-sram\0sram";
reg = <8000 4000>;
};
};
};
arch/powerpc/boot/dts/mpc7448hpc2.dts
浏览文件 @ 15a4cb9c
......@@ -161,29 +161,41 @@
interrupt-map = <
/* IDSEL 0x11 */
0800 0 0 1 7400 24 0
0800 0 0 2 7400 25 0
0800 0 0 3 7400 26 0
0800 0 0 4 7400 27 0
0800 0 0 1 1180 24 0
0800 0 0 2 1180 25 0
0800 0 0 3 1180 26 0
0800 0 0 4 1180 27 0
/* IDSEL 0x12 */
1000 0 0 1 7400 25 0
1000 0 0 2 7400 26 0
1000 0 0 3 7400 27 0
1000 0 0 4 7400 24 0
1000 0 0 1 1180 25 0
1000 0 0 2 1180 26 0
1000 0 0 3 1180 27 0
1000 0 0 4 1180 24 0
/* IDSEL 0x13 */
1800 0 0 1 7400 26 0
1800 0 0 2 7400 27 0
1800 0 0 3 7400 24 0
1800 0 0 4 7400 25 0
1800 0 0 1 1180 26 0
1800 0 0 2 1180 27 0
1800 0 0 3 1180 24 0
1800 0 0 4 1180 25 0
/* IDSEL 0x14 */
2000 0 0 1 7400 27 0
2000 0 0 2 7400 24 0
2000 0 0 3 7400 25 0
2000 0 0 4 7400 26 0
2000 0 0 1 1180 27 0
2000 0 0 2 1180 24 0
2000 0 0 3 1180 25 0
2000 0 0 4 1180 26 0
>;
router@1180 {
linux,phandle = <1180>;
clock-frequency = <0>;
interrupt-controller;
device_type = "pic-router";
#address-cells = <0>;
#interrupt-cells = <2>;
built-in;
big-endian;
interrupts = <17 2>;
interrupt-parent = <7400>;
};
};
};
......
arch/powerpc/boot/flatdevtree.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/boot/flatdevtree.h
浏览文件 @ 15a4cb9c
......@@ -17,7 +17,7 @@
#ifndef FLATDEVTREE_H
#define FLATDEVTREE_H
#include "types.h"
#include "flatdevtree_env.h"
/* Definitions used by the flattened device tree */
#define OF_DT_HEADER 0xd00dfeed /* marker */
......@@ -43,4 +43,64 @@ struct boot_param_header {
u32 dt_strings_size; /* size of the DT strings block */
};
struct ft_reserve {
u64 start;
u64 len;
};
struct ft_region {
char *start;
unsigned long size;
};
enum ft_rgn_id {
FT_RSVMAP,
FT_STRUCT,
FT_STRINGS,
FT_N_REGION
};
#define FT_MAX_DEPTH 50
struct ft_cxt {
struct boot_param_header *bph;
int max_size; /* maximum size of tree */
int isordered; /* everything in standard order */
void *(*realloc)(void *, unsigned long);
char *str_anchor;
char *p; /* current insertion point in structs */
struct ft_region rgn[FT_N_REGION];
void *genealogy[FT_MAX_DEPTH+1];
char **node_tbl;
unsigned int node_max;
unsigned int nodes_used;
};
int ft_begin_node(struct ft_cxt *cxt, const char *name);
void ft_end_node(struct ft_cxt *cxt);
void ft_begin_tree(struct ft_cxt *cxt);
void ft_end_tree(struct ft_cxt *cxt);
void ft_nop(struct ft_cxt *cxt);
int ft_prop(struct ft_cxt *cxt, const char *name,
const void *data, unsigned int sz);
int ft_prop_str(struct ft_cxt *cxt, const char *name, const char *str);
int ft_prop_int(struct ft_cxt *cxt, const char *name, unsigned int val);
void ft_begin(struct ft_cxt *cxt, void *blob, unsigned int max_size,
void *(*realloc_fn)(void *, unsigned long));
int ft_open(struct ft_cxt *cxt, void *blob, unsigned int max_size,
unsigned int max_find_device,
void *(*realloc_fn)(void *, unsigned long));
int ft_add_rsvmap(struct ft_cxt *cxt, u64 physaddr, u64 size);
void ft_dump_blob(const void *bphp);
void ft_merge_blob(struct ft_cxt *cxt, void *blob);
void *ft_find_device(struct ft_cxt *cxt, const char *srch_path);
void *ft_find_descendent(struct ft_cxt *cxt, void *top, const char *srch_path);
int ft_get_prop(struct ft_cxt *cxt, const void *phandle, const char *propname,
void *buf, const unsigned int buflen);
int ft_set_prop(struct ft_cxt *cxt, const void *phandle, const char *propname,
const void *buf, const unsigned int buflen);
#endif /* FLATDEVTREE_H */
arch/powerpc/boot/flatdevtree_env.h 0 → 100644
浏览文件 @ 15a4cb9c
/*
* This file adds the header file glue so that the shared files
* flatdevicetree.[ch] can compile and work in the powerpc bootwrapper.
*
* strncmp & strchr copied from <file:lib/strings.c>
* Copyright (C) 1991, 1992 Linus Torvalds
*
* Maintained by: Mark A. Greer <mgreer@mvista.com>
*/
#ifndef _PPC_BOOT_FLATDEVTREE_ENV_H_
#define _PPC_BOOT_FLATDEVTREE_ENV_H_
#include <stdarg.h>
#include <stddef.h>
#include "types.h"
#include "string.h"
#include "stdio.h"
#include "ops.h"
#define be16_to_cpu(x) (x)
#define cpu_to_be16(x) (x)
#define be32_to_cpu(x) (x)
#define cpu_to_be32(x) (x)
#define be64_to_cpu(x) (x)
#define cpu_to_be64(x) (x)
static inline int strncmp(const char *cs, const char *ct, size_t count)
{
signed char __res = 0;
while (count) {
if ((__res = *cs - *ct++) != 0 || !*cs++)
break;
count--;
}
return __res;
}
static inline char *strchr(const char *s, int c)
{
for (; *s != (char)c; ++s)
if (*s == '\0')
return NULL;
return (char *)s;
}
#endif /* _PPC_BOOT_FLATDEVTREE_ENV_H_ */
arch/powerpc/boot/flatdevtree_misc.c 0 → 100644
浏览文件 @ 15a4cb9c
/*
* This file does the necessary interface mapping between the bootwrapper
* device tree operations and the interface provided by shared source
* files flatdevicetree.[ch].
*
* Author: Mark A. Greer <mgreer@mvista.com>
*
* 2006 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <stddef.h>
#include "flatdevtree.h"
#include "ops.h"
static struct ft_cxt cxt;
static void *ft_finddevice(const char *name)
{
return ft_find_device(&cxt, name);
}
static int ft_getprop(const void *phandle, const char *propname, void *buf,
const int buflen)
{
return ft_get_prop(&cxt, phandle, propname, buf, buflen);
}
static int ft_setprop(const void *phandle, const char *propname,
const void *buf, const int buflen)
{
return ft_set_prop(&cxt, phandle, propname, buf, buflen);
}
static unsigned long ft_finalize(void)
{
ft_end_tree(&cxt);
return (unsigned long)cxt.bph;
}
int ft_init(void *dt_blob, unsigned int max_size, unsigned int max_find_device)
{
dt_ops.finddevice = ft_finddevice;
dt_ops.getprop = ft_getprop;
dt_ops.setprop = ft_setprop;
dt_ops.finalize = ft_finalize;
return ft_open(&cxt, dt_blob, max_size, max_find_device,
platform_ops.realloc);
}
arch/powerpc/boot/io.h 0 → 100644
浏览文件 @ 15a4cb9c
#ifndef _IO_H
#define __IO_H
/*
* Low-level I/O routines.
*
* Copied from <file:include/asm-powerpc/io.h> (which has no copyright)
*/
static inline int in_8(const volatile unsigned char *addr)
{
int ret;
__asm__ __volatile__("lbz%U1%X1 %0,%1; twi 0,%0,0; isync"
: "=r" (ret) : "m" (*addr));
return ret;
}
static inline void out_8(volatile unsigned char *addr, int val)
{
__asm__ __volatile__("stb%U0%X0 %1,%0; sync"
: "=m" (*addr) : "r" (val));
}
static inline unsigned in_le32(const volatile unsigned *addr)
{
unsigned ret;
__asm__ __volatile__("lwbrx %0,0,%1; twi 0,%0,0; isync"
: "=r" (ret) : "r" (addr), "m" (*addr));
return ret;
}
static inline unsigned in_be32(const volatile unsigned *addr)
{
unsigned ret;
__asm__ __volatile__("lwz%U1%X1 %0,%1; twi 0,%0,0; isync"
: "=r" (ret) : "m" (*addr));
return ret;
}
static inline void out_le32(volatile unsigned *addr, int val)
{
__asm__ __volatile__("stwbrx %1,0,%2; sync" : "=m" (*addr)
: "r" (val), "r" (addr));
}
static inline void out_be32(volatile unsigned *addr, int val)
{
__asm__ __volatile__("stw%U0%X0 %1,%0; sync"
: "=m" (*addr) : "r" (val));
}
#endif /* _IO_H */
arch/powerpc/boot/main.c
浏览文件 @ 15a4cb9c
......@@ -27,6 +27,8 @@ extern char _vmlinux_start[];
extern char _vmlinux_end[];
extern char _initrd_start[];
extern char _initrd_end[];
extern char _dtb_start[];
extern char _dtb_end[];
struct addr_range {
unsigned long addr;
......@@ -167,7 +169,7 @@ static int is_elf32(void *hdr)
return 1;
}
static void prep_kernel(unsigned long *a1, unsigned long *a2)
static void prep_kernel(unsigned long a1, unsigned long a2)
{
int len;
......@@ -203,11 +205,14 @@ static void prep_kernel(unsigned long *a1, unsigned long *a2)
}
/*
* Now we try to alloc memory for the initrd (and copy it there)
* Now find the initrd
*
* First see if we have an image attached to us. If so
* allocate memory for it and copy it there.
*/
initrd.size = (unsigned long)(_initrd_end - _initrd_start);
initrd.memsize = initrd.size;
if ( initrd.size > 0 ) {
if (initrd.size > 0) {
printf("Allocating 0x%lx bytes for initrd ...\n\r",
initrd.size);
initrd.addr = (unsigned long)malloc((u32)initrd.size);
......@@ -216,8 +221,6 @@ static void prep_kernel(unsigned long *a1, unsigned long *a2)
"ramdisk !\n\r");
exit();
}
*a1 = initrd.addr;
*a2 = initrd.size;
printf("initial ramdisk moving 0x%lx <- 0x%lx "
"(0x%lx bytes)\n\r", initrd.addr,
(unsigned long)_initrd_start, initrd.size);
......@@ -225,6 +228,12 @@ static void prep_kernel(unsigned long *a1, unsigned long *a2)
initrd.size);
printf("initrd head: 0x%lx\n\r",
*((unsigned long *)initrd.addr));
} else if (a2 != 0) {
/* Otherwise, see if yaboot or another loader gave us an initrd */
initrd.addr = a1;
initrd.memsize = initrd.size = a2;
printf("Using loader supplied initrd at 0x%lx (0x%lx bytes)\n\r",
initrd.addr, initrd.size);
}
/* Eventually gunzip the kernel */
......@@ -250,10 +259,6 @@ static void prep_kernel(unsigned long *a1, unsigned long *a2)
flush_cache((void *)vmlinux.addr, vmlinux.size);
}
void __attribute__ ((weak)) ft_init(void *dt_blob)
{
}
/* A buffer that may be edited by tools operating on a zImage binary so as to
* edit the command line passed to vmlinux (by setting /chosen/bootargs).
* The buffer is put in it's own section so that tools may locate it easier.
......@@ -285,36 +290,22 @@ static void set_cmdline(char *buf)
setprop(devp, "bootargs", buf, strlen(buf) + 1);
}
/* Section where ft can be tacked on after zImage is built */
union blobspace {
struct boot_param_header hdr;
char space[8*1024];
} dt_blob __attribute__((__section__("__builtin_ft")));
struct platform_ops platform_ops;
struct dt_ops dt_ops;
struct console_ops console_ops;
void start(unsigned long a1, unsigned long a2, void *promptr, void *sp)
{
int have_dt = 0;
kernel_entry_t kentry;
char cmdline[COMMAND_LINE_SIZE];
unsigned long ft_addr = 0;
memset(__bss_start, 0, _end - __bss_start);
memset(&platform_ops, 0, sizeof(platform_ops));
memset(&dt_ops, 0, sizeof(dt_ops));
memset(&console_ops, 0, sizeof(console_ops));
/* Override the dt_ops and device tree if there was an flat dev
* tree attached to the zImage.
*/
if (dt_blob.hdr.magic == OF_DT_HEADER) {
have_dt = 1;
ft_init(&dt_blob);
}
if (platform_init(promptr))
if (platform_init(promptr, _dtb_start, _dtb_end))
exit();
if (console_ops.open && (console_ops.open() < 0))
exit();
......@@ -324,7 +315,7 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp)
printf("\n\rzImage starting: loaded at 0x%p (sp: 0x%p)\n\r",
_start, sp);
prep_kernel(&a1, &a2);
prep_kernel(a1, a2);
/* If cmdline came from zimage wrapper or if we can edit the one
* in the dt, print it out and edit it, if possible.
......@@ -338,15 +329,23 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp)
set_cmdline(cmdline);
}
printf("Finalizing device tree...");
if (dt_ops.finalize)
ft_addr = dt_ops.finalize();
if (ft_addr)
printf(" flat tree at 0x%lx\n\r", ft_addr);
else
printf(" using OF tree (promptr=%p)\n\r", promptr);
if (console_ops.close)
console_ops.close();
kentry = (kernel_entry_t) vmlinux.addr;
if (have_dt)
kentry(dt_ops.ft_addr(), 0, NULL);
if (ft_addr)
kentry(ft_addr, 0, NULL);
else
/* XXX initrd addr/size should be passed in properties */
kentry(a1, a2, promptr);
kentry(initrd.addr, initrd.size, promptr);
/* console closed so printf below may not work */
printf("Error: Linux kernel returned to zImage boot wrapper!\n\r");
......
arch/powerpc/boot/mktree.c 0 → 100644
浏览文件 @ 15a4cb9c
/*
* Makes a tree bootable image for IBM Evaluation boards.
* Basically, just take a zImage, skip the ELF header, and stuff
* a 32 byte header on the front.
*
* We use htonl, which is a network macro, to make sure we're doing
* The Right Thing on an LE machine. It's non-obvious, but it should
* work on anything BSD'ish.
*/
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/stat.h>
#include <unistd.h>
#include <netinet/in.h>
#ifdef __sun__
#include <inttypes.h>
#else
#include <stdint.h>
#endif
/* This gets tacked on the front of the image. There are also a few
* bytes allocated after the _start label used by the boot rom (see
* head.S for details).
*/
typedef struct boot_block {
uint32_t bb_magic; /* 0x0052504F */
uint32_t bb_dest; /* Target address of the image */
uint32_t bb_num_512blocks; /* Size, rounded-up, in 512 byte blks */
uint32_t bb_debug_flag; /* Run debugger or image after load */
uint32_t bb_entry_point; /* The image address to start */
uint32_t bb_checksum; /* 32 bit checksum including header */
uint32_t reserved[2];
} boot_block_t;
#define IMGBLK 512
char tmpbuf[IMGBLK];
int main(int argc, char *argv[])
{
int in_fd, out_fd;
int nblks, i;
uint cksum, *cp;
struct stat st;
boot_block_t bt;
if (argc < 3) {
fprintf(stderr, "usage: %s <zImage-file> <boot-image> [entry-point]\n",argv[0]);
exit(1);
}
if (stat(argv[1], &st) < 0) {
perror("stat");
exit(2);
}
nblks = (st.st_size + IMGBLK) / IMGBLK;
bt.bb_magic = htonl(0x0052504F);
/* If we have the optional entry point parameter, use it */
if (argc == 4)
bt.bb_dest = bt.bb_entry_point = htonl(strtoul(argv[3], NULL, 0));
else
bt.bb_dest = bt.bb_entry_point = htonl(0x500000);
/* We know these from the linker command.
* ...and then move it up into memory a little more so the
* relocation can happen.
*/
bt.bb_num_512blocks = htonl(nblks);
bt.bb_debug_flag = 0;
bt.bb_checksum = 0;
/* To be neat and tidy :-).
*/
bt.reserved[0] = 0;
bt.reserved[1] = 0;
if ((in_fd = open(argv[1], O_RDONLY)) < 0) {
perror("zImage open");
exit(3);
}
if ((out_fd = open(argv[2], (O_RDWR | O_CREAT | O_TRUNC), 0666)) < 0) {
perror("bootfile open");
exit(3);
}
cksum = 0;
cp = (void *)&bt;
for (i=0; i<sizeof(bt)/sizeof(uint); i++)
cksum += *cp++;
/* Assume zImage is an ELF file, and skip the 64K header.
*/
if (read(in_fd, tmpbuf, IMGBLK) != IMGBLK) {
fprintf(stderr, "%s is too small to be an ELF image\n",
argv[1]);
exit(4);
}
if ((*(uint *)tmpbuf) != htonl(0x7f454c46)) {
fprintf(stderr, "%s is not an ELF image\n", argv[1]);
exit(4);
}
if (lseek(in_fd, (64 * 1024), SEEK_SET) < 0) {
fprintf(stderr, "%s failed to seek in ELF image\n", argv[1]);
exit(4);
}
nblks -= (64 * 1024) / IMGBLK;
/* And away we go......
*/
if (write(out_fd, &bt, sizeof(bt)) != sizeof(bt)) {
perror("boot-image write");
exit(5);
}
while (nblks-- > 0) {
if (read(in_fd, tmpbuf, IMGBLK) < 0) {
perror("zImage read");
exit(5);
}
cp = (uint *)tmpbuf;
for (i=0; i<sizeof(tmpbuf)/sizeof(uint); i++)
cksum += *cp++;
if (write(out_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) {
perror("boot-image write");
exit(5);
}
}
/* rewrite the header with the computed checksum.
*/
bt.bb_checksum = htonl(cksum);
if (lseek(out_fd, 0, SEEK_SET) < 0) {
perror("rewrite seek");
exit(1);
}
if (write(out_fd, &bt, sizeof(bt)) != sizeof(bt)) {
perror("boot-image rewrite");
exit(1);
}
exit(0);
}
arch/powerpc/boot/ns16550.c 0 → 100644
浏览文件 @ 15a4cb9c
/*
* 16550 serial console support.
*
* Original copied from <file:arch/ppc/boot/common/ns16550.c>
* (which had no copyright)
* Modifications: 2006 (c) MontaVista Software, Inc.
*
* Modified by: Mark A. Greer <mgreer@mvista.com>
*/
#include <stdarg.h>
#include <stddef.h>
#include "types.h"
#include "string.h"
#include "stdio.h"
#include "io.h"
#include "ops.h"
#define UART_DLL 0 /* Out: Divisor Latch Low */
#define UART_DLM 1 /* Out: Divisor Latch High */
#define UART_FCR 2 /* Out: FIFO Control Register */
#define UART_LCR 3 /* Out: Line Control Register */
#define UART_MCR 4 /* Out: Modem Control Register */
#define UART_LSR 5 /* In: Line Status Register */
#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */
#define UART_LSR_DR 0x01 /* Receiver data ready */
#define UART_MSR 6 /* In: Modem Status Register */
#define UART_SCR 7 /* I/O: Scratch Register */
static unsigned char *reg_base;
static u32 reg_shift;
static int ns16550_open(void)
{
out_8(reg_base + (UART_FCR << reg_shift), 0x06);
return 0;
}
static void ns16550_putc(unsigned char c)
{
while ((in_8(reg_base + (UART_LSR << reg_shift)) & UART_LSR_THRE) == 0);
out_8(reg_base, c);
}
static unsigned char ns16550_getc(void)
{
while ((in_8(reg_base + (UART_LSR << reg_shift)) & UART_LSR_DR) == 0);
return in_8(reg_base);
}
static u8 ns16550_tstc(void)
{
return ((in_8(reg_base + (UART_LSR << reg_shift)) & UART_LSR_DR) != 0);
}
int ns16550_console_init(void *devp, struct serial_console_data *scdp)
{
int n;
n = getprop(devp, "virtual-reg", &reg_base, sizeof(reg_base));
if (n != sizeof(reg_base))
return -1;
n = getprop(devp, "reg-shift", &reg_shift, sizeof(reg_shift));
if (n != sizeof(reg_shift))
reg_shift = 0;
scdp->open = ns16550_open;
scdp->putc = ns16550_putc;
scdp->getc = ns16550_getc;
scdp->tstc = ns16550_tstc;
scdp->close = NULL;
return 0;
}
arch/powerpc/boot/of.c
浏览文件 @ 15a4cb9c
......@@ -256,24 +256,18 @@ static void of_console_write(char *buf, int len)
call_prom("write", 3, 1, of_stdout_handle, buf, len);
}
int platform_init(void *promptr)
int platform_init(void *promptr, char *dt_blob_start, char *dt_blob_end)
{
platform_ops.fixups = NULL;
platform_ops.image_hdr = of_image_hdr;
platform_ops.malloc = of_try_claim;
platform_ops.free = NULL;
platform_ops.exit = of_exit;
dt_ops.finddevice = of_finddevice;
dt_ops.getprop = of_getprop;
dt_ops.setprop = of_setprop;
dt_ops.translate_addr = NULL;
console_ops.open = of_console_open;
console_ops.write = of_console_write;
console_ops.edit_cmdline = NULL;
console_ops.close = NULL;
console_ops.data = NULL;
prom = (int (*)(void *))promptr;
return 0;
......
arch/powerpc/boot/ops.h
浏览文件 @ 15a4cb9c
......@@ -22,7 +22,8 @@ struct platform_ops {
void (*fixups)(void);
void (*image_hdr)(const void *);
void * (*malloc)(u32 size);
void (*free)(void *ptr, u32 size);
void (*free)(void *ptr);
void * (*realloc)(void *ptr, unsigned long size);
void (*exit)(void);
};
extern struct platform_ops platform_ops;
......@@ -30,13 +31,11 @@ extern struct platform_ops platform_ops;
/* Device Tree operations */
struct dt_ops {
void * (*finddevice)(const char *name);
int (*getprop)(const void *node, const char *name, void *buf,
int (*getprop)(const void *phandle, const char *name, void *buf,
const int buflen);
int (*setprop)(const void *node, const char *name,
int (*setprop)(const void *phandle, const char *name,
const void *buf, const int buflen);
u64 (*translate_addr)(const char *path, const u32 *in_addr,
const u32 addr_len);
unsigned long (*ft_addr)(void);
unsigned long (*finalize)(void);
};
extern struct dt_ops dt_ops;
......@@ -59,10 +58,13 @@ struct serial_console_data {
void (*close)(void);
};
extern int platform_init(void *promptr);
extern void simple_alloc_init(void);
extern void ft_init(void *dt_blob);
extern int serial_console_init(void);
int platform_init(void *promptr, char *dt_blob_start, char *dt_blob_end);
int ft_init(void *dt_blob, unsigned int max_size, unsigned int max_find_device);
int serial_console_init(void);
int ns16550_console_init(void *devp, struct serial_console_data *scdp);
void *simple_alloc_init(char *base, u32 heap_size, u32 granularity,
u32 max_allocs);
static inline void *finddevice(const char *name)
{
......@@ -84,10 +86,10 @@ static inline void *malloc(u32 size)
return (platform_ops.malloc) ? platform_ops.malloc(size) : NULL;
}
static inline void free(void *ptr, u32 size)
static inline void free(void *ptr)
{
if (platform_ops.free)
platform_ops.free(ptr, size);
platform_ops.free(ptr);
}
static inline void exit(void)
......
arch/powerpc/boot/serial.c 0 → 100644
浏览文件 @ 15a4cb9c
/*
* Generic serial console support
*
* Author: Mark A. Greer <mgreer@mvista.com>
*
* Code in serial_edit_cmdline() copied from <file:arch/ppc/boot/simple/misc.c>
* and was written by Matt Porter <mporter@kernel.crashing.org>.
*
* 2001,2006 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <stdarg.h>
#include <stddef.h>
#include "types.h"
#include "string.h"
#include "stdio.h"
#include "io.h"
#include "ops.h"
extern void udelay(long delay);
static int serial_open(void)
{
struct serial_console_data *scdp = console_ops.data;
return scdp->open();
}
static void serial_write(char *buf, int len)
{
struct serial_console_data *scdp = console_ops.data;
while (*buf != '\0')
scdp->putc(*buf++);
}
static void serial_edit_cmdline(char *buf, int len)
{
int timer = 0, count;
char ch, *cp;
struct serial_console_data *scdp = console_ops.data;
cp = buf;
count = strlen(buf);
cp = &buf[count];
count++;
while (timer++ < 5*1000) {
if (scdp->tstc()) {
while (((ch = scdp->getc()) != '\n') && (ch != '\r')) {
/* Test for backspace/delete */
if ((ch == '\b') || (ch == '\177')) {
if (cp != buf) {
cp--;
count--;
printf("\b \b");
}
/* Test for ^x/^u (and wipe the line) */
} else if ((ch == '\030') || (ch == '\025')) {
while (cp != buf) {
cp--;
count--;
printf("\b \b");
}
} else if (count < len) {
*cp++ = ch;
count++;
scdp->putc(ch);
}
}
break; /* Exit 'timer' loop */
}
udelay(1000); /* 1 msec */
}
*cp = 0;
}
static void serial_close(void)
{
struct serial_console_data *scdp = console_ops.data;
if (scdp->close)
scdp->close();
}
static void *serial_get_stdout_devp(void)
{
void *devp;
char devtype[MAX_PROP_LEN];
char path[MAX_PATH_LEN];
devp = finddevice("/chosen");
if (devp == NULL)
goto err_out;
if (getprop(devp, "linux,stdout-path", path, MAX_PATH_LEN) > 0) {
devp = finddevice(path);
if (devp == NULL)
goto err_out;
if ((getprop(devp, "device_type", devtype, sizeof(devtype)) > 0)
&& !strcmp(devtype, "serial"))
return devp;
}
err_out:
return NULL;
}
static struct serial_console_data serial_cd;
/* Node's "compatible" property determines which serial driver to use */
int serial_console_init(void)
{
void *devp;
int rc = -1;
char compat[MAX_PROP_LEN];
devp = serial_get_stdout_devp();
if (devp == NULL)
goto err_out;
if (getprop(devp, "compatible", compat, sizeof(compat)) < 0)
goto err_out;
if (!strcmp(compat, "ns16550"))
rc = ns16550_console_init(devp, &serial_cd);
/* Add other serial console driver calls here */
if (!rc) {
console_ops.open = serial_open;
console_ops.write = serial_write;
console_ops.edit_cmdline = serial_edit_cmdline;
console_ops.close = serial_close;
console_ops.data = &serial_cd;
return 0;
}
err_out:
return -1;
}
arch/powerpc/boot/simple_alloc.c 0 → 100644
浏览文件 @ 15a4cb9c
/*
* Implement primitive realloc(3) functionality.
*
* Author: Mark A. Greer <mgreer@mvista.com>
*
* 2006 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <stddef.h>
#include "types.h"
#include "page.h"
#include "string.h"
#include "ops.h"
#define ENTRY_BEEN_USED 0x01
#define ENTRY_IN_USE 0x02
static struct alloc_info {
u32 flags;
u32 base;
u32 size;
} *alloc_tbl;
static u32 tbl_entries;
static u32 alloc_min;
static u32 next_base;
static u32 space_left;
/*
* First time an entry is used, its base and size are set.
* An entry can be freed and re-malloc'd but its base & size don't change.
* Should be smart enough for needs of bootwrapper.
*/
static void *simple_malloc(u32 size)
{
u32 i;
struct alloc_info *p = alloc_tbl;
if (size == 0)
goto err_out;
size = _ALIGN_UP(size, alloc_min);
for (i=0; i<tbl_entries; i++, p++)
if (!(p->flags & ENTRY_BEEN_USED)) { /* never been used */
if (size <= space_left) {
p->base = next_base;
p->size = size;
p->flags = ENTRY_BEEN_USED | ENTRY_IN_USE;
next_base += size;
space_left -= size;
return (void *)p->base;
}
goto err_out; /* not enough space left */
}
/* reuse an entry keeping same base & size */
else if (!(p->flags & ENTRY_IN_USE) && (size <= p->size)) {
p->flags |= ENTRY_IN_USE;
return (void *)p->base;
}
err_out:
return NULL;
}
static struct alloc_info *simple_find_entry(void *ptr)
{
u32 i;
struct alloc_info *p = alloc_tbl;
for (i=0; i<tbl_entries; i++,p++) {
if (!(p->flags & ENTRY_BEEN_USED))
break;
if ((p->flags & ENTRY_IN_USE) && (p->base == (u32)ptr))
return p;
}
return NULL;
}
static void simple_free(void *ptr)
{
struct alloc_info *p = simple_find_entry(ptr);
if (p != NULL)
p->flags &= ~ENTRY_IN_USE;
}
/*
* Change size of area pointed to by 'ptr' to 'size'.
* If 'ptr' is NULL, then its a malloc(). If 'size' is 0, then its a free().
* 'ptr' must be NULL or a pointer to a non-freed area previously returned by
* simple_realloc() or simple_malloc().
*/
static void *simple_realloc(void *ptr, unsigned long size)
{
struct alloc_info *p;
void *new;
if (size == 0) {
simple_free(ptr);
return NULL;
}
if (ptr == NULL)
return simple_malloc(size);
p = simple_find_entry(ptr);
if (p == NULL) /* ptr not from simple_malloc/simple_realloc */
return NULL;
if (size <= p->size) /* fits in current block */
return ptr;
new = simple_malloc(size);
memcpy(new, ptr, p->size);
simple_free(ptr);
return new;
}
/*
* Returns addr of first byte after heap so caller can see if it took
* too much space. If so, change args & try again.
*/
void *simple_alloc_init(char *base, u32 heap_size, u32 granularity,
u32 max_allocs)
{
u32 heap_base, tbl_size;
heap_size = _ALIGN_UP(heap_size, granularity);
alloc_min = granularity;
tbl_entries = max_allocs;
tbl_size = tbl_entries * sizeof(struct alloc_info);
alloc_tbl = (struct alloc_info *)_ALIGN_UP((unsigned long)base, 8);
memset(alloc_tbl, 0, tbl_size);
heap_base = _ALIGN_UP((u32)alloc_tbl + tbl_size, alloc_min);
next_base = heap_base;
space_left = heap_size;
platform_ops.malloc = simple_malloc;
platform_ops.free = simple_free;
platform_ops.realloc = simple_realloc;
return (void *)(heap_base + heap_size);
}
arch/powerpc/boot/stdio.c
浏览文件 @ 15a4cb9c
......@@ -320,6 +320,7 @@ printf(const char *fmt, ...)
va_start(args, fmt);
n = vsprintf(sprint_buf, fmt, args);
va_end(args);
console_ops.write(sprint_buf, n);
if (console_ops.write)
console_ops.write(sprint_buf, n);
return n;
}
arch/powerpc/boot/util.S 0 → 100644
浏览文件 @ 15a4cb9c
/*
* Copied from <file:arch/powerpc/kernel/misc_32.S>
*
* This file contains miscellaneous low-level functions.
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
*
* Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
* and Paul Mackerras.
*
* kexec bits:
* Copyright (C) 2002-2003 Eric Biederman <ebiederm@xmission.com>
* GameCube/ppc32 port Copyright (C) 2004 Albert Herranz
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
#include "ppc_asm.h"
#define SPRN_PVR 0x11F /* Processor Version Register */
.text
/* udelay (on non-601 processors) needs to know the period of the
* timebase in nanoseconds. This used to be hardcoded to be 60ns
* (period of 66MHz/4). Now a variable is used that is initialized to
* 60 for backward compatibility, but it can be overridden as necessary
* with code something like this:
* extern unsigned long timebase_period_ns;
* timebase_period_ns = 1000000000 / bd->bi_tbfreq;
*/
.data
.globl timebase_period_ns
timebase_period_ns:
.long 60
.text
/*
* Delay for a number of microseconds
*/
.globl udelay
udelay:
mfspr r4,SPRN_PVR
srwi r4,r4,16
cmpwi 0,r4,1 /* 601 ? */
bne .udelay_not_601
00: li r0,86 /* Instructions / microsecond? */
mtctr r0
10: addi r0,r0,0 /* NOP */
bdnz 10b
subic. r3,r3,1
bne 00b
blr
.udelay_not_601:
mulli r4,r3,1000 /* nanoseconds */
/* Change r4 to be the number of ticks using:
* (nanoseconds + (timebase_period_ns - 1 )) / timebase_period_ns
* timebase_period_ns defaults to 60 (16.6MHz) */
mflr r5
bl 0f
0: mflr r6
mtlr r5
lis r5,0b@ha
addi r5,r5,0b@l
subf r5,r5,r6 /* In case we're relocated */
addis r5,r5,timebase_period_ns@ha
lwz r5,timebase_period_ns@l(r5)
add r4,r4,r5
addi r4,r4,-1
divw r4,r4,r5 /* BUS ticks */
1: mftbu r5
mftb r6
mftbu r7
cmpw 0,r5,r7
bne 1b /* Get [synced] base time */
addc r9,r6,r4 /* Compute end time */
addze r8,r5
2: mftbu r5
cmpw 0,r5,r8
blt 2b
bgt 3f
mftb r6
cmpw 0,r6,r9
blt 2b
3: blr
arch/powerpc/boot/wrapper
浏览文件 @ 15a4cb9c
......@@ -184,6 +184,9 @@ fi
if [ -n "$dtb" ]; then
addsec $tmp "$dtb" .kernel:dtb
if [ -n "$dts" ]; then
rm $dtb
fi
fi
if [ "$platform" != "miboot" ]; then
......
arch/powerpc/boot/zImage.coff.lds.S
浏览文件 @ 15a4cb9c
......@@ -21,6 +21,10 @@ SECTIONS
*(.got2)
__got2_end = .;
_dtb_start = .;
*(.kernel:dtb)
_dtb_end = .;
_vmlinux_start = .;
*(.kernel:vmlinux.strip)
_vmlinux_end = .;
......
arch/powerpc/configs/cell_defconfig
浏览文件 @ 15a4cb9c
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.18
# Wed Oct 4 15:30:50 2006
# Linux kernel version: 2.6.19-rc6
# Wed Nov 22 15:33:04 2006
#
CONFIG_PPC64=y
CONFIG_64BIT=y
......@@ -32,6 +32,10 @@ CONFIG_AUDIT_ARCH=y
CONFIG_POWER3=y
CONFIG_POWER4=y
CONFIG_PPC_FPU=y
# CONFIG_PPC_DCR_NATIVE is not set
CONFIG_PPC_DCR_MMIO=y
CONFIG_PPC_DCR=y
CONFIG_PPC_OF_PLATFORM_PCI=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_VIRT_CPU_ACCOUNTING=y
......@@ -67,7 +71,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
......@@ -131,6 +135,7 @@ CONFIG_PPC_CELL=y
CONFIG_PPC_CELL_NATIVE=y
CONFIG_PPC_IBM_CELL_BLADE=y
CONFIG_UDBG_RTAS_CONSOLE=y
CONFIG_PPC_PS3=y
# CONFIG_U3_DART is not set
CONFIG_PPC_RTAS=y
# CONFIG_RTAS_ERROR_LOGGING is not set
......@@ -139,9 +144,23 @@ CONFIG_RTAS_FLASH=y
CONFIG_MMIO_NVRAM=y
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_CPU_FREQ is not set
CONFIG_PPC_INDIRECT_IO=y
CONFIG_GENERIC_IOMAP=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# CONFIG_CPU_FREQ_PMAC64 is not set
# CONFIG_WANT_EARLY_SERIAL is not set
# CONFIG_MPIC is not set
CONFIG_MPIC=y
#
# Cell Broadband Engine options
......@@ -149,6 +168,15 @@ CONFIG_MMIO_NVRAM=y
CONFIG_SPU_FS=m
CONFIG_SPU_BASE=y
CONFIG_CBE_RAS=y
CONFIG_CBE_THERM=m
CONFIG_CBE_CPUFREQ=m
#
# PS3 Platform Options
#
CONFIG_PS3_HTAB_SIZE=20
# CONFIG_PS3_DYNAMIC_DMA is not set
CONFIG_PS3_USE_LPAR_ADDR=y
#
# Kernel options
......@@ -166,13 +194,14 @@ CONFIG_BINFMT_MISC=m
CONFIG_FORCE_MAX_ZONEORDER=9
# CONFIG_IOMMU_VMERGE is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_KEXEC=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=4
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
......@@ -189,6 +218,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_NODES_SPAN_OTHER_NODES=y
CONFIG_PPC_64K_PAGES=y
CONFIG_SCHED_SMT=y
CONFIG_PROC_DEVICETREE=y
......@@ -207,7 +237,6 @@ CONFIG_GENERIC_ISA_DMA=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
# CONFIG_PCI_MULTITHREAD_PROBE is not set
# CONFIG_PCI_DEBUG is not set
#
......@@ -280,7 +309,6 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_SIT is not set
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_SUBTREES is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
......@@ -1107,7 +1135,8 @@ CONFIG_PLIST=y
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
# CONFIG_KPROBES is not set
#
......@@ -1142,6 +1171,7 @@ CONFIG_DEBUG_FS=y
CONFIG_DEBUGGER=y
CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
CONFIG_XMON_DISASSEMBLY=y
CONFIG_IRQSTACKS=y
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
......@@ -1159,7 +1189,7 @@ CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
# CONFIG_CRYPTO_MANAGER is not set
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
......
arch/powerpc/configs/linkstation_defconfig 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/configs/lite5200_defconfig 0 → 100644
浏览文件 @ 15a4cb9c
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.19-rc6
# Mon Nov 27 11:08:20 2006
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
# CONFIG_PPC_UDBG_16550 is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
# CONFIG_DEFAULT_UIMAGE is not set
#
# Processor support
#
CONFIG_CLASSIC32=y
# CONFIG_PPC_52xx is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_8xx is not set
# CONFIG_E200 is not set
CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_SMP is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_EMBEDDED6xx is not set
# CONFIG_APUS is not set
# CONFIG_PPC_CHRP is not set
CONFIG_PPC_MPC52xx=y
# CONFIG_PPC_EFIKA is not set
CONFIG_PPC_LITE5200=y
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_TAU is not set
# CONFIG_WANT_EARLY_SERIAL is not set
# CONFIG_MPIC is not set
#
# Kernel options
#
# CONFIG_HIGHMEM is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_KEXEC is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
# CONFIG_SOFTWARE_SUSPEND is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_BOOT_LOAD=0x00800000
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
CONFIG_ATA=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_MPC52xx=y
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
# CONFIG_WINDFARM is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
# CONFIG_INPUT is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_MPC52xx=y
CONFIG_SERIAL_MPC52xx_CONSOLE=y
CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=9600
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
# CONFIG_NLS is not set
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUGGER is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_SERIAL_TEXT_DEBUG is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
arch/powerpc/configs/ppc64_defconfig
浏览文件 @ 15a4cb9c
......@@ -1386,8 +1386,8 @@ CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
......
arch/powerpc/configs/ps3_defconfig 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/kernel/Makefile
浏览文件 @ 15a4cb9c
......@@ -17,11 +17,11 @@ obj-y += vdso32/
obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \
signal_64.o ptrace32.o \
paca.o cpu_setup_ppc970.o \
firmware.o sysfs.o
firmware.o sysfs.o nvram_64.o
obj-$(CONFIG_PPC64) += vdso64/
obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o
obj-$(CONFIG_PPC_970_NAP) += idle_power4.o
obj-$(CONFIG_PPC_OF) += of_device.o prom_parse.o
obj-$(CONFIG_PPC_OF) += of_device.o of_platform.o prom_parse.o
procfs-$(CONFIG_PPC64) := proc_ppc64.o
obj-$(CONFIG_PROC_FS) += $(procfs-y)
rtaspci-$(CONFIG_PPC64) := rtas_pci.o
......@@ -32,7 +32,6 @@ obj-$(CONFIG_LPARCFG) += lparcfg.o
obj-$(CONFIG_IBMVIO) += vio.o
obj-$(CONFIG_IBMEBUS) += ibmebus.o
obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o
obj64-$(CONFIG_PPC_MULTIPLATFORM) += nvram_64.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
obj-$(CONFIG_6xx) += idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o
obj-$(CONFIG_TAU) += tau_6xx.o
......@@ -59,11 +58,11 @@ obj-$(CONFIG_BOOTX_TEXT) += btext.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_PPC_UDBG_16550) += legacy_serial.o udbg_16550.o
module-$(CONFIG_PPC64) += module_64.o
obj-$(CONFIG_MODULES) += $(module-y)
pci64-$(CONFIG_PPC64) += pci_64.o pci_dn.o pci_iommu.o \
pci_direct_iommu.o iomap.o
pci64-$(CONFIG_PPC64) += pci_64.o pci_dn.o
pci32-$(CONFIG_PPC32) := pci_32.o
obj-$(CONFIG_PCI) += $(pci64-y) $(pci32-y)
kexec-$(CONFIG_PPC64) := machine_kexec_64.o
......@@ -72,8 +71,12 @@ obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o $(kexec-y)
obj-$(CONFIG_AUDIT) += audit.o
obj64-$(CONFIG_AUDIT) += compat_audit.o
ifneq ($(CONFIG_PPC_INDIRECT_IO),y)
obj-y += iomap.o
endif
ifeq ($(CONFIG_PPC_ISERIES),y)
$(obj)/head_64.o: $(obj)/lparmap.s
extra-y += lparmap.s
AFLAGS_head_64.o += -I$(obj)
endif
......
arch/powerpc/kernel/asm-offsets.c
浏览文件 @ 15a4cb9c
......@@ -118,7 +118,8 @@ int main(void)
DEFINE(PACASTABRR, offsetof(struct paca_struct, stab_rr));
DEFINE(PACAR1, offsetof(struct paca_struct, saved_r1));
DEFINE(PACATOC, offsetof(struct paca_struct, kernel_toc));
DEFINE(PACAPROCENABLED, offsetof(struct paca_struct, proc_enabled));
DEFINE(PACASOFTIRQEN, offsetof(struct paca_struct, soft_enabled));
DEFINE(PACAHARDIRQEN, offsetof(struct paca_struct, hard_enabled));
DEFINE(PACASLBCACHE, offsetof(struct paca_struct, slb_cache));
DEFINE(PACASLBCACHEPTR, offsetof(struct paca_struct, slb_cache_ptr));
DEFINE(PACACONTEXTID, offsetof(struct paca_struct, context.id));
......
arch/powerpc/kernel/cpu_setup_ppc970.S
浏览文件 @ 15a4cb9c
......@@ -83,6 +83,22 @@ _GLOBAL(__setup_cpu_ppc970)
rldimi r0,r11,52,8 /* set NAP and DPM */
li r11,0
rldimi r0,r11,32,31 /* clear EN_ATTN */
b load_hids /* Jump to shared code */
_GLOBAL(__setup_cpu_ppc970MP)
/* Do nothing if not running in HV mode */
mfmsr r0
rldicl. r0,r0,4,63
beqlr
mfspr r0,SPRN_HID0
li r11,0x15 /* clear DOZE and SLEEP */
rldimi r0,r11,52,6 /* set DEEPNAP, NAP and DPM */
li r11,0
rldimi r0,r11,32,31 /* clear EN_ATTN */
load_hids:
mtspr SPRN_HID0,r0
mfspr r0,SPRN_HID0
mfspr r0,SPRN_HID0
......
arch/powerpc/kernel/cputable.c
浏览文件 @ 15a4cb9c
......@@ -42,6 +42,7 @@ extern void __setup_cpu_745x(unsigned long offset, struct cpu_spec* spec);
#endif /* CONFIG_PPC32 */
#ifdef CONFIG_PPC64
extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_ppc970MP(unsigned long offset, struct cpu_spec* spec);
extern void __restore_cpu_ppc970(void);
#endif /* CONFIG_PPC64 */
......@@ -222,9 +223,9 @@ static struct cpu_spec cpu_specs[] = {
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
.cpu_setup = __setup_cpu_ppc970,
.cpu_setup = __setup_cpu_ppc970MP,
.cpu_restore = __restore_cpu_ppc970,
.oprofile_cpu_type = "ppc64/970",
.oprofile_cpu_type = "ppc64/970MP",
.oprofile_type = PPC_OPROFILE_POWER4,
.platform = "ppc970",
},
......@@ -276,10 +277,45 @@ static struct cpu_spec cpu_specs[] = {
.oprofile_mmcra_sipr = MMCRA_SIPR,
.platform = "power5+",
},
{ /* POWER6 in P5+ mode; 2.04-compliant processor */
.pvr_mask = 0xffffffff,
.pvr_value = 0x0f000001,
.cpu_name = "POWER5+",
.cpu_features = CPU_FTRS_POWER5,
.cpu_user_features = COMMON_USER_POWER5_PLUS,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 6,
.oprofile_cpu_type = "ppc64/power6",
.oprofile_type = PPC_OPROFILE_POWER4,
.oprofile_mmcra_sihv = POWER6_MMCRA_SIHV,
.oprofile_mmcra_sipr = POWER6_MMCRA_SIPR,
.oprofile_mmcra_clear = POWER6_MMCRA_THRM |
POWER6_MMCRA_OTHER,
.platform = "power5+",
},
{ /* Power6 */
.pvr_mask = 0xffff0000,
.pvr_value = 0x003e0000,
.cpu_name = "POWER6",
.cpu_name = "POWER6 (raw)",
.cpu_features = CPU_FTRS_POWER6,
.cpu_user_features = COMMON_USER_POWER6 |
PPC_FEATURE_POWER6_EXT,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 6,
.oprofile_cpu_type = "ppc64/power6",
.oprofile_type = PPC_OPROFILE_POWER4,
.oprofile_mmcra_sihv = POWER6_MMCRA_SIHV,
.oprofile_mmcra_sipr = POWER6_MMCRA_SIPR,
.oprofile_mmcra_clear = POWER6_MMCRA_THRM |
POWER6_MMCRA_OTHER,
.platform = "power6x",
},
{ /* 2.05-compliant processor, i.e. Power6 "architected" mode */
.pvr_mask = 0xffffffff,
.pvr_value = 0x0f000002,
.cpu_name = "POWER6 (architected)",
.cpu_features = CPU_FTRS_POWER6,
.cpu_user_features = COMMON_USER_POWER6,
.icache_bsize = 128,
......@@ -303,6 +339,9 @@ static struct cpu_spec cpu_specs[] = {
PPC_FEATURE_SMT,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 4,
.oprofile_cpu_type = "ppc64/cell-be",
.oprofile_type = PPC_OPROFILE_CELL,
.platform = "ppc-cell-be",
},
{ /* PA Semi PA6T */
......@@ -801,6 +840,17 @@ static struct cpu_spec cpu_specs[] = {
.cpu_setup = __setup_cpu_603,
.platform = "ppc603",
},
{ /* e300c3 on 83xx */
.pvr_mask = 0x7fff0000,
.pvr_value = 0x00850000,
.cpu_name = "e300c3",
.cpu_features = CPU_FTRS_E300,
.cpu_user_features = COMMON_USER,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_603,
.platform = "ppc603",
},
{ /* default match, we assume split I/D cache & TB (non-601)... */
.pvr_mask = 0x00000000,
.pvr_value = 0x00000000,
......@@ -1169,19 +1219,15 @@ static struct cpu_spec cpu_specs[] = {
#endif /* CONFIG_PPC32 */
};
struct cpu_spec *identify_cpu(unsigned long offset)
struct cpu_spec *identify_cpu(unsigned long offset, unsigned int pvr)
{
struct cpu_spec *s = cpu_specs;
struct cpu_spec **cur = &cur_cpu_spec;
unsigned int pvr = mfspr(SPRN_PVR);
int i;
s = PTRRELOC(s);
cur = PTRRELOC(cur);
if (*cur != NULL)
return PTRRELOC(*cur);
for (i = 0; i < ARRAY_SIZE(cpu_specs); i++,s++)
if ((pvr & s->pvr_mask) == s->pvr_value) {
*cur = cpu_specs + i;
......
arch/powerpc/kernel/crash.c
浏览文件 @ 15a4cb9c
......@@ -111,7 +111,7 @@ void crash_ipi_callback(struct pt_regs *regs)
if (!cpu_online(cpu))
return;
local_irq_disable();
hard_irq_disable();
if (!cpu_isset(cpu, cpus_in_crash))
crash_save_this_cpu(regs, cpu);
cpu_set(cpu, cpus_in_crash);
......@@ -289,7 +289,7 @@ void default_machine_crash_shutdown(struct pt_regs *regs)
* an SMP system.
* The kernel is broken so disable interrupts.
*/
local_irq_disable();
hard_irq_disable();
for_each_irq(irq) {
struct irq_desc *desc = irq_desc + irq;
......
arch/powerpc/kernel/dma_64.c
浏览文件 @ 15a4cb9c
/*
* Copyright (C) 2004 IBM Corporation
* Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corporation
*
* Implements the generic device dma API for ppc64. Handles
* the pci and vio busses
* Provide default implementations of the DMA mapping callbacks for
* directly mapped busses and busses using the iommu infrastructure
*/
#include <linux/device.h>
#include <linux/dma-mapping.h>
/* Include the busses we support */
#include <linux/pci.h>
#include <asm/vio.h>
#include <asm/ibmebus.h>
#include <asm/scatterlist.h>
#include <asm/bug.h>
#include <asm/iommu.h>
#include <asm/abs_addr.h>
static struct dma_mapping_ops *get_dma_ops(struct device *dev)
{
#ifdef CONFIG_PCI
if (dev->bus == &pci_bus_type)
return &pci_dma_ops;
#endif
#ifdef CONFIG_IBMVIO
if (dev->bus == &vio_bus_type)
return &vio_dma_ops;
#endif
#ifdef CONFIG_IBMEBUS
if (dev->bus == &ibmebus_bus_type)
return &ibmebus_dma_ops;
#endif
return NULL;
}
/*
* Generic iommu implementation
*/
int dma_supported(struct device *dev, u64 mask)
static inline unsigned long device_to_mask(struct device *dev)
{
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
if (dev->dma_mask && *dev->dma_mask)
return *dev->dma_mask;
/* Assume devices without mask can take 32 bit addresses */
return 0xfffffffful;
}
BUG_ON(!dma_ops);
return dma_ops->dma_supported(dev, mask);
/* Allocates a contiguous real buffer and creates mappings over it.
* Returns the virtual address of the buffer and sets dma_handle
* to the dma address (mapping) of the first page.
*/
static void *dma_iommu_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t flag)
{
return iommu_alloc_coherent(dev->archdata.dma_data, size, dma_handle,
device_to_mask(dev), flag,
dev->archdata.numa_node);
}
EXPORT_SYMBOL(dma_supported);
int dma_set_mask(struct device *dev, u64 dma_mask)
static void dma_iommu_free_coherent(struct device *dev, size_t size,
void *vaddr, dma_addr_t dma_handle)
{
#ifdef CONFIG_PCI
if (dev->bus == &pci_bus_type)
return pci_set_dma_mask(to_pci_dev(dev), dma_mask);
#endif
#ifdef CONFIG_IBMVIO
if (dev->bus == &vio_bus_type)
return -EIO;
#endif /* CONFIG_IBMVIO */
#ifdef CONFIG_IBMEBUS
if (dev->bus == &ibmebus_bus_type)
return -EIO;
#endif
BUG();
return 0;
iommu_free_coherent(dev->archdata.dma_data, size, vaddr, dma_handle);
}
EXPORT_SYMBOL(dma_set_mask);
void *dma_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t flag)
/* Creates TCEs for a user provided buffer. The user buffer must be
* contiguous real kernel storage (not vmalloc). The address of the buffer
* passed here is the kernel (virtual) address of the buffer. The buffer
* need not be page aligned, the dma_addr_t returned will point to the same
* byte within the page as vaddr.
*/
static dma_addr_t dma_iommu_map_single(struct device *dev, void *vaddr,
size_t size,
enum dma_data_direction direction)
{
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
return dma_ops->alloc_coherent(dev, size, dma_handle, flag);
return iommu_map_single(dev->archdata.dma_data, vaddr, size,
device_to_mask(dev), direction);
}
EXPORT_SYMBOL(dma_alloc_coherent);
void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
dma_addr_t dma_handle)
static void dma_iommu_unmap_single(struct device *dev, dma_addr_t dma_handle,
size_t size,
enum dma_data_direction direction)
{
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
iommu_unmap_single(dev->archdata.dma_data, dma_handle, size, direction);
}
BUG_ON(!dma_ops);
dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
static int dma_iommu_map_sg(struct device *dev, struct scatterlist *sglist,
int nelems, enum dma_data_direction direction)
{
return iommu_map_sg(dev->archdata.dma_data, sglist, nelems,
device_to_mask(dev), direction);
}
EXPORT_SYMBOL(dma_free_coherent);
dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, size_t size,
enum dma_data_direction direction)
static void dma_iommu_unmap_sg(struct device *dev, struct scatterlist *sglist,
int nelems, enum dma_data_direction direction)
{
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
return dma_ops->map_single(dev, cpu_addr, size, direction);
iommu_unmap_sg(dev->archdata.dma_data, sglist, nelems, direction);
}
EXPORT_SYMBOL(dma_map_single);
void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
enum dma_data_direction direction)
/* We support DMA to/from any memory page via the iommu */
static int dma_iommu_dma_supported(struct device *dev, u64 mask)
{
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
dma_ops->unmap_single(dev, dma_addr, size, direction);
struct iommu_table *tbl = dev->archdata.dma_data;
if (!tbl || tbl->it_offset > mask) {
printk(KERN_INFO
"Warning: IOMMU offset too big for device mask\n");
if (tbl)
printk(KERN_INFO
"mask: 0x%08lx, table offset: 0x%08lx\n",
mask, tbl->it_offset);
else
printk(KERN_INFO "mask: 0x%08lx, table unavailable\n",
mask);
return 0;
} else
return 1;
}
EXPORT_SYMBOL(dma_unmap_single);
dma_addr_t dma_map_page(struct device *dev, struct page *page,
unsigned long offset, size_t size,
enum dma_data_direction direction)
{
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
struct dma_mapping_ops dma_iommu_ops = {
.alloc_coherent = dma_iommu_alloc_coherent,
.free_coherent = dma_iommu_free_coherent,
.map_single = dma_iommu_map_single,
.unmap_single = dma_iommu_unmap_single,
.map_sg = dma_iommu_map_sg,
.unmap_sg = dma_iommu_unmap_sg,
.dma_supported = dma_iommu_dma_supported,
};
EXPORT_SYMBOL(dma_iommu_ops);
BUG_ON(!dma_ops);
/*
* Generic direct DMA implementation
*
* This implementation supports a global offset that can be applied if
* the address at which memory is visible to devices is not 0.
*/
unsigned long dma_direct_offset;
return dma_ops->map_single(dev, page_address(page) + offset, size,
direction);
static void *dma_direct_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t flag)
{
struct page *page;
void *ret;
int node = dev->archdata.numa_node;
/* TODO: Maybe use the numa node here too ? */
page = alloc_pages_node(node, flag, get_order(size));
if (page == NULL)
return NULL;
ret = page_address(page);
memset(ret, 0, size);
*dma_handle = virt_to_abs(ret) | dma_direct_offset;
return ret;
}
EXPORT_SYMBOL(dma_map_page);
void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
enum dma_data_direction direction)
static void dma_direct_free_coherent(struct device *dev, size_t size,
void *vaddr, dma_addr_t dma_handle)
{
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
free_pages((unsigned long)vaddr, get_order(size));
}
BUG_ON(!dma_ops);
static dma_addr_t dma_direct_map_single(struct device *dev, void *ptr,
size_t size,
enum dma_data_direction direction)
{
return virt_to_abs(ptr) | dma_direct_offset;
}
dma_ops->unmap_single(dev, dma_address, size, direction);
static void dma_direct_unmap_single(struct device *dev, dma_addr_t dma_addr,
size_t size,
enum dma_data_direction direction)
{
}
EXPORT_SYMBOL(dma_unmap_page);
int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
enum dma_data_direction direction)
static int dma_direct_map_sg(struct device *dev, struct scatterlist *sg,
int nents, enum dma_data_direction direction)
{
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
int i;
BUG_ON(!dma_ops);
for (i = 0; i < nents; i++, sg++) {
sg->dma_address = (page_to_phys(sg->page) + sg->offset) |
dma_direct_offset;
sg->dma_length = sg->length;
}
return dma_ops->map_sg(dev, sg, nents, direction);
return nents;
}
EXPORT_SYMBOL(dma_map_sg);
void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
enum dma_data_direction direction)
static void dma_direct_unmap_sg(struct device *dev, struct scatterlist *sg,
int nents, enum dma_data_direction direction)
{
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
BUG_ON(!dma_ops);
}
dma_ops->unmap_sg(dev, sg, nhwentries, direction);
static int dma_direct_dma_supported(struct device *dev, u64 mask)
{
/* Could be improved to check for memory though it better be
* done via some global so platforms can set the limit in case
* they have limited DMA windows
*/
return mask >= DMA_32BIT_MASK;
}
EXPORT_SYMBOL(dma_unmap_sg);
struct dma_mapping_ops dma_direct_ops = {
.alloc_coherent = dma_direct_alloc_coherent,
.free_coherent = dma_direct_free_coherent,
.map_single = dma_direct_map_single,
.unmap_single = dma_direct_unmap_single,
.map_sg = dma_direct_map_sg,
.unmap_sg = dma_direct_unmap_sg,
.dma_supported = dma_direct_dma_supported,
};
EXPORT_SYMBOL(dma_direct_ops);
arch/powerpc/kernel/entry_64.S
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/kernel/head_64.S
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/kernel/ibmebus.c
浏览文件 @ 15a4cb9c
......@@ -112,7 +112,7 @@ static int ibmebus_dma_supported(struct device *dev, u64 mask)
return 1;
}
struct dma_mapping_ops ibmebus_dma_ops = {
static struct dma_mapping_ops ibmebus_dma_ops = {
.alloc_coherent = ibmebus_alloc_coherent,
.free_coherent = ibmebus_free_coherent,
.map_single = ibmebus_map_single,
......@@ -176,6 +176,10 @@ static struct ibmebus_dev* __devinit ibmebus_register_device_common(
dev->ofdev.dev.bus = &ibmebus_bus_type;
dev->ofdev.dev.release = ibmebus_dev_release;
dev->ofdev.dev.archdata.of_node = dev->ofdev.node;
dev->ofdev.dev.archdata.dma_ops = &ibmebus_dma_ops;
dev->ofdev.dev.archdata.numa_node = of_node_to_nid(dev->ofdev.node);
/* An ibmebusdev is based on a of_device. We have to change the
* bus type to use our own DMA mapping operations.
*/
......@@ -210,11 +214,10 @@ static struct ibmebus_dev* __devinit ibmebus_register_device_node(
return NULL;
}
dev = kmalloc(sizeof(struct ibmebus_dev), GFP_KERNEL);
dev = kzalloc(sizeof(struct ibmebus_dev), GFP_KERNEL);
if (!dev) {
return NULL;
}
memset(dev, 0, sizeof(struct ibmebus_dev));
dev->ofdev.node = of_node_get(dn);
......
arch/powerpc/kernel/idle.c
浏览文件 @ 15a4cb9c
......@@ -39,6 +39,13 @@
#define cpu_should_die() 0
#endif
static int __init powersave_off(char *arg)
{
ppc_md.power_save = NULL;
return 0;
}
__setup("powersave=off", powersave_off);
/*
* The body of the idle task.
*/
......
arch/powerpc/kernel/idle_power4.S
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/kernel/io.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/kernel/iomap.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/kernel/iommu.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/kernel/irq.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/kernel/of_device.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/kernel/of_platform.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/kernel/pci_32.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/kernel/pci_64.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/kernel/pci_direct_iommu.c 已删除 100644 → 0
浏览文件 @ ff51a987
此差异已折叠。
arch/powerpc/kernel/pci_iommu.c 已删除 100644 → 0
浏览文件 @ ff51a987
此差异已折叠。
arch/powerpc/kernel/ppc_ksyms.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/kernel/prom.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/kernel/prom_init.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/kernel/prom_parse.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/kernel/rtas.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/kernel/rtas_flash.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/kernel/rtas_pci.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/kernel/setup_32.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/kernel/setup_64.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/kernel/smp-tbsync.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/kernel/smp.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/kernel/sys_ppc32.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/kernel/sysfs.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/kernel/time.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/kernel/traps.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/kernel/vio.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/mm/Makefile
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/mm/fault.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/mm/hash_native_64.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/mm/hash_utils_64.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/mm/init_64.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/mm/pgtable_32.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/mm/pgtable_64.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/mm/slb.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/oprofile/Makefile
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/oprofile/common.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/oprofile/op_model_cell.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/52xx/Makefile 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/52xx/efika-pci.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/52xx/efika-setup.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/52xx/efika.h 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/52xx/lite5200.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/52xx/mpc52xx_common.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/52xx/mpc52xx_pic.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/52xx/mpc52xx_pic.h 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/83xx/pci.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/85xx/misc.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/Makefile
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/cell/Kconfig
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/cell/cbe_cpufreq.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/cell/cbe_thermal.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/cell/io-workarounds.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/cell/iommu.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/cell/iommu.h 已删除 100644 → 0
浏览文件 @ ff51a987
此差异已折叠。
arch/powerpc/platforms/cell/pmu.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/cell/setup.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/cell/spu_coredump.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/cell/spu_priv1_mmio.h 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/cell/spufs/coredump.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/chrp/chrp.h
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/chrp/pci.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/chrp/setup.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/embedded6xx/linkstation.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/embedded6xx/ls_uart.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/iseries/dt.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/maple/pci.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/pasemi/pci.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/ps3/Kconfig 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/ps3/Makefile 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/ps3/exports.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/ps3/htab.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/ps3/hvcall.S 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/ps3/interrupt.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/ps3/mm.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/ps3/os-area.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/ps3/platform.h 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/ps3/repository.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/ps3/setup.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/ps3/smp.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/ps3/spu.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/platforms/ps3/time.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/sysdev/Makefile
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/sysdev/dart_iommu.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/sysdev/dcr-low.S 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/sysdev/dcr.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/sysdev/fsl_soc.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/sysdev/mpic.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/sysdev/qe_lib/qe.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/sysdev/rom.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/sysdev/todc.c 已删除 100644 → 0
浏览文件 @ ff51a987
此差异已折叠。
arch/powerpc/sysdev/tsi108_pci.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/xmon/Makefile
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/xmon/dis-asm.h 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/xmon/ppc-dis.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/xmon/ppc-opc.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/xmon/ppc.h
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/xmon/spu-dis.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/xmon/spu-insns.h 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/xmon/spu-opc.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/xmon/spu.h 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/powerpc/xmon/xmon.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/ppc/.gitignore 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/ppc/Kconfig
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/ppc/boot/images/.gitignore 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/ppc/boot/lib/.gitignore 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/ppc/boot/utils/.gitignore 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/ppc/kernel/setup.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/ppc/kernel/traps.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/ppc/platforms/4xx/bubinga.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/ppc/platforms/4xx/cpci405.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/ppc/platforms/4xx/ep405.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/ppc/platforms/85xx/sbc8560.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/ppc/platforms/85xx/stx_gp3.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/ppc/platforms/85xx/tqm85xx.c
浏览文件 @ 15a4cb9c
此差异已折叠。
arch/ppc/syslib/mpc8xx_devices.c
浏览文件 @ 15a4cb9c
此差异已折叠。
drivers/Makefile
浏览文件 @ 15a4cb9c
此差异已折叠。
drivers/block/viodasd.c
浏览文件 @ 15a4cb9c
此差异已折叠。
drivers/ide/pci/via82cxxx.c
浏览文件 @ 15a4cb9c
此差异已折叠。
drivers/macintosh/Kconfig
浏览文件 @ 15a4cb9c
此差异已折叠。
drivers/macintosh/Makefile
浏览文件 @ 15a4cb9c
此差异已折叠。
drivers/macintosh/rack-meter.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
drivers/macintosh/smu.c
浏览文件 @ 15a4cb9c
此差异已折叠。
drivers/macintosh/therm_adt746x.c
浏览文件 @ 15a4cb9c
此差异已折叠。
drivers/macintosh/therm_pm72.c
浏览文件 @ 15a4cb9c
此差异已折叠。
drivers/net/ibm_emac/ibm_emac_mal.h
浏览文件 @ 15a4cb9c
此差异已折叠。
drivers/net/ibmveth.c
浏览文件 @ 15a4cb9c
此差异已折叠。
drivers/net/ibmveth.h
浏览文件 @ 15a4cb9c
此差异已折叠。
drivers/net/phy/fixed.c
浏览文件 @ 15a4cb9c
此差异已折叠。
drivers/net/spider_net.c
浏览文件 @ 15a4cb9c
此差异已折叠。
drivers/net/tulip/de4x5.c
浏览文件 @ 15a4cb9c
此差异已折叠。
drivers/ps3/Makefile 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
drivers/ps3/system-bus.c 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
drivers/serial/mpc52xx_uart.c
浏览文件 @ 15a4cb9c
此差异已折叠。
drivers/video/platinumfb.c
浏览文件 @ 15a4cb9c
此差异已折叠。
fs/binfmt_elf.c
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/Kbuild
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/cell-pmu.h 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/cputable.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/dbdma.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/dcr-mmio.h 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/dcr-native.h 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/dcr.h 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/device.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/dma-mapping.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/eeh.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/elf.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/firmware.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/hw_irq.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/ibmebus.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/ide.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/immap_qe.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/io-defs.h 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/io.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/iommu.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/irq.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/iseries/iommu.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/lv1call.h 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/machdep.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/mmu.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/mpc52xx.h 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/mpc85xx.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/mpic.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/of_device.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/of_platform.h 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/oprofile_impl.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/paca.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/pci-bridge.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/pci.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/ppc-pci.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/processor.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/prom.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/ps3.h 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/rtas.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/sparsemem.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/spu.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/spu_csa.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/spu_info.h 0 → 100644
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/spu_priv1.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/todc.h 已删除 100644 → 0
浏览文件 @ ff51a987
此差异已折叠。
include/asm-powerpc/topology.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/tsi108.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/uaccess.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/unistd.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/vio.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-powerpc/xmon.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-ppc/io.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-ppc/m48t35.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-ppc/mpc52xx.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-ppc/mpc83xx.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-ppc/mpc85xx.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/asm-ppc/pci-bridge.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/linux/cpu.h
浏览文件 @ 15a4cb9c
此差异已折叠。
include/linux/elf.h
浏览文件 @ 15a4cb9c
此差异已折叠。
lib/iomap.c
浏览文件 @ 15a4cb9c
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或