- 24 4月, 2008 39 次提交
-
-
由 Takashi Iwai 提交于
Added the new model mobile for AD1884A and compatible codecs. It's a reduced version of model=laptop. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added the support of new AD codecs: AD1883, AD1884A, AD1984A and AD1984B. These are almost compatible except for additional digital pins, etc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Liam Girdwood 提交于
This patch adds an ASoC driver for the WM9713 AC97 codec. Signed-off-by: NLiam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
ALC262 must have capsrc_nids defined as well as in ALC882. Also, add a NULL check in alc882_mux_enum_put to avoid Oops. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Libin Yang 提交于
This patch is to add R7xx HDMI audio support. Signed-off-by: NLibin Yang <Libin.yang@amd.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The last patch for fixing the auto-config pin setting breaks the resume due to a wrong use of snd_hda_codec_amp_stereo(). The code in the init hook shouldn't touch the amp cache. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added more known names to the vendor id list. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added a new mixer switch to enable/disable the sharing of the default PCM stream with analog and SPDIF outputs. When "IEC958 Default PCM" switch is on, the PCM stream is routed both to analog and SPDIF outputs. This is the behavior in the earlier version. Turning this switch off has a merit for some codecs, though. Some codec chips don't support 24bit formats for SPDIF but only for analog outputs. In this case, you can use 24bit format by disabling this switch. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
This patch fixes some bugs in the auto-configurator of Realtek codecs: - add missing pin set-up for speaker pins - fix the speaker auto-mute function not to conflict with the existing "Speaker" mixer switch Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
In some cases, the BIOS sets up only the HP pins with different assoc and sequence numbers, e.g. on FSC Esprimo with ALC262. This patch adds a fix-up for such a case. When multiple HPs are defined and no line-outs is found, the configurator tries to re-assign some pins from HP list to line-out, judging from the sequence number. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Implemented the auto-mic jack sensing for Samsung laptops with AD1986A codec chip (model=laptop-eapd). The hardware uses pin 0x1d and 0x1f for the internal and external mics, respectively. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Clean up the codes of the capture source selection for Realtek codecs. Now using common helper functions with the new capsrc_nids field. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Reprogram the speaker-pin setting at each HP pin plug to make sure the spekaer auto-muting on AD1981HD hp model. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Fixed some issues with ALC880 F1734 model - fix capture via mic - enable volume-wheel control Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Pavel Hofman 提交于
A simple patch for listing AK4114 regs in proc. Signed-off-by: NPavel Hofman <dustin@seznam.cz> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jonathan Woithe 提交于
I've just noticed that there are a handful of duplicate controls in the ALC268 test model mixer. This patch (against alsa-driver 1.0.16) removes them. Signed-off-by: NJonathan Woithe <jwoithe@physics.adelaide.edu.au> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Give better names to the new HDMI transmitter chips. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Forgot to get rid of the obsolete fragsize field from a debug print. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jaroslav Kysela 提交于
See ALSA bug#3327 for more details. Experimental. Also fix support for M-Audio Delta 1010E - subdevice check. Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Jaroslav Kysela 提交于
For more details, see ALSA bug#3327 . Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
The HD-audio hardware usually supports 64bit address for DMA and other buffers. The patch enables the feature if supported. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Use SG buffers for the HD-audio instead of linear buffers. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Matthew Ranostay 提交于
On several laptops that have STAC9228 codecs have unused DACs, this powers them down to a D3 state. Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Alan Horstmann 提交于
Fixes the problems with Midi In on Hoontech/STA dsp24 cards, for example with DSP2000 box, without restricting the box configurations available. Also adds mpu_401 name strings. Signed-off-by: NAlan Horstmann <gineera@aspect135.co.uk> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added the ID for an unknown HDMI codec chip on Jetway J9F2. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
In the current scheme, PCM device numbers are assigned incrementally in the order of codecs. This causes problems when the codec number is irregular, e.g. codec #0 for HDMI and codec #1 for analog. Then the HDMI becomes the first PCM, which is picked up as the default output device. Unfortuantely this doesn't work well with normal setups. This patch introduced the fixed device numbers for the PCM types, namely, analog, SPDIF, HDMI and modem. The PCM devices are assigned according to the corresponding PCM type. After this patch, HDMI will be always assigned to PCM #3, SPDIF to PCM #1, and the first analog to PCM #0, etc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added more fallbacks to OSS PHONEOUT mixer mapping. This corresponds to the speaker output in general, so now "Mono" and "Speaker" are assigned. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added the missing GPIO setup for the AK5385A ADC codec on Audiophile192. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Fixed and enabled the support of AK4114 chip on Audiophile192. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Mirco Tischler 提交于
Adds support for zepto laptops with alc268 intel_hda codec. Signed-off-by: NMirco Tischler <mt-ml@gmx.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added the support of SI HDMI codec, found in ASUS machines. ALSA bug#3654 https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3654Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The current code doesn't allow multiple SPDIF devices, and causes errors when multiple SPDIF devices are found (e.g. SPDIF out and HDMI). This patch allows multiple SPDIF devices by incrementing the index automatically. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Tobin Davis 提交于
This patch adds support for the OQO Model 2 Ultra Mobile PC. Signed-off-by: NTobin Davis <tdavis@dsl-only.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kristoffer Ericson 提交于
Currently you will see an empty "SoC Audio support for SuperH" menu when building for other archs (example pxa). This patch adds "depends on SUPERH" to remove that empty menu. Signed-off-by: NKristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Mike Montour 提交于
Voice playback volume is in register bits 0:2, not 4:6. From: Mike Montour <mail@mmontour.net> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: Werner Almesberger <werner@openmoko.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Christoph Lameter 提交于
Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: [patch 7/7] vfs: mountinfo: show dominating group id [patch 6/7] vfs: mountinfo: add /proc/<pid>/mountinfo [patch 5/7] vfs: mountinfo: allow using process root [patch 4/7] vfs: mountinfo: add mount peer group ID [patch 3/7] vfs: mountinfo: add mount ID [patch 2/7] vfs: mountinfo: add seq_file_root() [patch 1/7] vfs: mountinfo: add dentry_path() [PATCH] remove unused label in xattr.c (noise from ro-bind)
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: iwlwifi: Fix built-in compilation of iwlcore net: Unexport move_addr_to_{kernel,user} rt2x00: Select LEDS_CLASS. iwlwifi: Select LEDS_CLASS. leds: Do not guard NEW_LEDS with HAS_IOMEM [IPSEC]: Fix catch-22 with algorithm IDs above 31 time: Export set_normalized_timespec. tcp: Make use of before macro in tcp_input.c hamradio: Remove unneeded and deprecated cli()/sti() calls in dmascc.c [NETNS]: Remove empty ->init callback. [DCCP]: Convert do_gettimeofday() to getnstimeofday(). [NETNS]: Don't initialize err variable twice. [NETNS]: The ip6_fib_timer can work with garbage on net namespace stop. [IPV4]: Convert do_gettimeofday() to getnstimeofday(). [IPV4]: Make icmp_sk_init() static. [IPV6]: Make struct ip6_prohibit_entry_template static. tcp: Trivial fix to correct function name in a comment in net/ipv4/tcp.c [NET]: Expose netdevice dev_id through sysfs skbuff: fix missing kernel-doc notation [ROSE]: Fix soft lockup wrt. rose_node_list_lock
-
由 Len Brown 提交于
PNP_MAX_IRQ is 2 If a device invokes pnpacpi_parse_allocated_irqresource() 0, 1, or 2 times, we are happy. The 3rd time, we will fail and print "pnpacpi: exceeded the max number of IRQ resources: 2" The 4th and subsequent calls (if this ever happened) would silently scribble on irq_resource[2], which doesn't actualy exist. Found-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 4月, 2008 1 次提交
-
-
由 Tomas Winkler 提交于
This patch fixes problem in Makefile that prevented built-in compilation of iwlcore Commit that caused this problem: eadd3c4b ("iwlwifi: make Makefile more concise") Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NYi Zhu <yi.zhu@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-