- 14 4月, 2010 1 次提交
-
-
由 Takashi Iwai 提交于
The commit 5b0cb1d8 ALSA: hda - add more NID->Control mapping breaks the control element allocation by returning a wrong value. Let's fix it. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 4月, 2010 2 次提交
-
-
由 Takashi Iwai 提交于
Sony VAIO models with ALC269 need to initialize the pin 0x19 to VREF ground or Hi-Z to make the headphone working. Other than that, model=auto works fine, so let's use model=auto with a specific fix-up table. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
A few enhancement / fixes for fix-up table of some Realtek codecs: - Apply fix-ups only for the auto model - Apply additional verbs after normal init verbs - Add a debug print to show the fix-up application This is basically a preliminary work for the next fix for Sony VAIO. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 09 4月, 2010 3 次提交
-
-
由 Takashi Iwai 提交于
The widget connections of ADC of ALC880 and ALC2260 aren't initialized, thus it might point to invalid pin. This can be a problem when mode=auto and there is only one input pin. Then user can't change the connection at all. This patch adds the code to initialize the input pin connection of these codecs. Reference: Novell bnc#594363 https://bugzilla.novell.com/show_bug.cgi?id=594363Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kailang Yang 提交于
Corrected HP and mic pins for ALC269vb amic and dmic models. Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kailang Yang 提交于
ALC269vb has an alternative HP pin 0x21 in addition. Fix the parser to recognize it. Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 07 4月, 2010 1 次提交
-
-
由 Maurus Cuelenaere 提交于
This adds support for the Medion WIM2160 soundcard. There's no PCI quirk added because it has the same PCI id as the Medion MD2. Signed-off-by: NMaurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 06 4月, 2010 2 次提交
-
-
由 Takashi Iwai 提交于
The commit 6a4f2ccb introduced a wrong comparision for the array range check, which effectively skips the whole initialization of DAC connections. Fixed now. Reference: bko#15689 https://bugzilla.kernel.org/show_bug.cgi?id=15689Reported-by: NAdrian Ulrich <kernel@blinkenlights.ch> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Tony Vroon 提交于
After more tests it appears that EAPD needs to be enabled on both the 0x14 and 0x15 NIDs to enable the main speaker and headphone amplifiers. The maximum volume setting is now equal to what the machine achieves under other operating systems. Disabling Front or LFE playback triggers EAPD and disables the amplifier. As such, these two playback switches have been removed from the mixer. Signed-off-by: NTony Vroon <tony@linx.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 4月, 2010 1 次提交
-
-
由 Takashi Iwai 提交于
The device needs MSI disablement. Added to the quirk list. Reported-by: NHarald Dunkel <harri@afaics.de> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 31 3月, 2010 1 次提交
-
-
由 Daniel T Chen 提交于
BugLink: https://launchpad.net/bugs/551606 The OR's hardware distorts at PCM 100% because it does not correspond to 0 dB. Fix this in patch_ad1981() for all models using the Thinkpad quirk. Reported-by: Jane Silber Cc: <stable@kernel.org> Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 30 3月, 2010 1 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 29 3月, 2010 3 次提交
-
-
由 Takashi Iwai 提交于
ALC269 codec has a few different variants, and each of them may have different ADC and MUX widgets. For example, one model has ADC 0x08 with MUX 0x23 while others has ADC 0x09 or ADC 0x07 with MUX 022 or 0x24. The difference of ADC appears usually as the capability of the digital mic pin (0x12), and the current driver sometimes misses the internal mic pin due to the mismatching ADC. This patch adds a bit more clever way to find the matching ADC instead of the static list. Now the driver checks all active input pins and fills only the ADC/MUX's that contain all of them. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The mask and value parameters passed to snd_hda_codec_amp_stereo() should be 8-bit values for mute and volume. Passing AMP_IN_MUTE() is wrong, which is found in many places in patch_realtek.c as a left-over from the conversion to snd_hda_codec_amp_stereo(). Reported-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Daniel T Chen 提交于
BugLink: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=575669 The OR states that position_fix=1 is necessary to work around glitching during volume adjustments using PulseAudio. Reported-by: NCarlos Laviola <claviola@debian.org> Tested-by: NCarlos Laviola <claviola@debian.org> Cc: <stable@kernel.org> Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 3月, 2010 1 次提交
-
-
由 Takashi Iwai 提交于
Skip initialization of connections of DAC widgets that aren't used, which resulted in invalid verb parameters. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 3月, 2010 4 次提交
-
-
由 Takashi Iwai 提交于
alc_free_kctls() has to be called after all jobs done in alc_build_controls(). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Derek Kelly 提交于
This patch adds the device id for Nvidia GT220 cards to the nvhdmi driver. I have tested it and confirmed it to be working. Original patch download link: https://gist.github.com/324070/Signed-off-by: NDerek Kelly <user.vdr@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Daniel T Chen 提交于
BugLink: https://launchpad.net/bugs/420578 The OR has verified that his hardware distorts because of the 0 dB offset not corresponding to the highest PCM level. Fix this by capping said PCM level to 0 dB similarly to what we do for CX20549 (Venice). Reported-by: NMike Pontillo <pontillo@gmail.com> Tested-by: NMike Pontillo <pontillo@gmail.com> Cc: <stable@kernel.org> Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 21 3月, 2010 1 次提交
-
-
由 Kunal Gangakhedkar 提交于
Adding this PCI quirk fixes the board config detection. This also fixes jack sensing by using "hp_detect=1" via properly detected board config. Signed-off-by: NKunal Gangakhedkar <kunal.gangakhedkar@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 16 3月, 2010 1 次提交
-
-
由 Daniel T Chen 提交于
BugLink: https://bugs.launchpad.net/bugs/538895 The OR has verified that both position_fix=1 and model=6stack-dig are necessary to have capture function properly. (The existing 3stack-6ch model quirk seems to be incorrect.) Reported-by: NReuben Bailey <reuben.e.bailey@gmail.com> Tested-by: NReuben Bailey <reuben.e.bailey@gmail.com> Cc: <stable@kernel.org> Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 15 3月, 2010 5 次提交
-
-
由 Takashi Iwai 提交于
Judging from the member of enable_msi white-list, Nvidia controller seems to cause troubles with MSI enabled, e.g. boot hang up or other serious issue may come up. It's safer to disable MSI as default for Nvidia controllers again for now. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
-
由 Anisse Astier 提交于
This should make the speakers and jack detection work on MSI all-in-one computers NetOn AP1900 and Wind Top AE2220. Signed-off-by: NAnisse Astier <anisse@astier.eu> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Fix adc_nids[] for ALC260 basic model to match with num_adc_nids. Otherwise you get an invalid NID in the secondary "Input Source" mixer element. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
-
由 Takashi Iwai 提交于
Add an error message to snd_hda_add_nid() for invalid mapping NID to make easier to hunt the buggy code. Also added a missing space to the error message in snd_hda_build_controls() Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Vitaliy Kulikov 提交于
Added a PCI controller id on new Dell laptops. Signed-off-by: NVitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 10 3月, 2010 1 次提交
-
-
由 Ralf Gerbig 提交于
without the following patch audio ssttuutteerrs on ASUS M2N32-SLI PREMIUM ACPI BIOS Revision 1304 the sound device is: 00:0e.1 Audio device: nVidia Corporation MCP55 High Definition Audio (rev a2) worked with 2.6.32 Signed-off-by: NRalf Gerbig <rge@quengel.org> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 08 3月, 2010 4 次提交
-
-
由 Takashi Iwai 提交于
Since alc_auto_create_input_ctls() doesn't set the elements for the secondary ADCs, "Input Source" elemtns for these also get empty, resulting in buggy outputs of alsactl like: control.14 { comment.access 'read write' comment.type ENUMERATED comment.count 1 iface MIXER name 'Input Source' index 1 value 0 } This patch fixes alc_mux_enum_*() (and others) to fall back to the first entry if the secondary input mux is empty. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
-
由 Takashi Iwai 提交于
Fix a wrong value passed to snd_hda_check_board_codec_sid_config() as the upper-limit in parse_alc268(), so that any wrong value can't be passed. So far, no bogus value was set in the quirk entries, so this won't give any behavioral changes. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wu Fengguang 提交于
Also change printk level for the two others. Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wu Fengguang 提交于
Create patch_hdmi.c to hold common code from intelhdmi and nvhdmi. For now the patch_hdmi.c file is simply included by patch_intelhdmi.c and patch_nvhdmi.c, and does not represent a real codec. There are no behavior changes to intelhdmi. However nvhdmi made several changes when copying code out of intelhdmi, which are all reverted in this patch. Wei Ni confirmed that the reverted code actually works fine. Tested-by: NWei Ni <wni@nvidia.com> Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 07 3月, 2010 1 次提交
-
-
由 Michele Ballabio 提交于
This avoids a lockup at boot. Signed-off-by: NMichele Ballabio <barra_cuda@katamail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 05 3月, 2010 2 次提交
-
-
由 Frederik Deweerdt 提交于
Commit eaa9b3a7 introduced the following uninitialized warning: sound/pci/hda/patch_realtek.c: In function 'set_capture_mixer': sound/pci/hda/patch_realtek.c:4928: warning: 'pin' is used uninitialized in this function sound/pci/hda/patch_realtek.c:4918: note: 'pin' was declared here It appears indeed that 'pin' needs to be initialized to 0. Signed-off-by: NFrederik Deweerdt <frederik.deweerdt@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Daniel T Chen 提交于
BugLink: https://launchpad.net/bugs/523953 The OR has verified that position_fix=1 is necessary to work around errors on his machine. Reported-by: MMarking Cc: <stable@kernel.org> Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 3月, 2010 5 次提交
-
-
由 Daniel T Chen 提交于
BugLink: https://launchpad.net/bugs/530346 The OR has verified that position_fix=1 is necessary to work around errors on his machine. Reported-by: Tom Louwrier Cc: <stable@kernel.org> Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Now two modules require hda_eld.o, so we need to put it to the common place instead of building into two individual modules. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wei Ni 提交于
Support nvidia MCP89 and GT21x 8ch hdmi audio. Add some eld support. Signed-off-by: NWei Ni <wni@nvidia.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Wei Ni 提交于
Support max codecs to 8 for nvidia hda controller. Change AZX_MAX_CODECS to 8, and add "#define AZX_DEFAULT_CODECS 4" for default driver. Set azx_max_codecs to 8 for nvidia controller. Signed-off-by: NWei Ni <wni@nvidia.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Dan Carpenter 提交于
If getpaths() returned an odd number this would be a buffer under-run and an endless loop. It turns out that getpaths() can only return even numbers, but let's make it easy for people auditing code. With the new code you don't need to look at getpaths(). This silences a smatch warning. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-