提交 ff818c24 编写于 作者: T Takashi Iwai

ALSA: hda - Add fix-up for Sony VAIO with ALC269

Sony VAIO models with ALC269 need to initialize the pin 0x19 to VREF
ground or Hi-Z to make the headphone working.  Other than that, model=auto
works fine, so let's use model=auto with a specific fix-up table.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
上级 7fa90e87
......@@ -14077,6 +14077,27 @@ static void alc269_auto_init(struct hda_codec *codec)
alc_inithook(codec);
}
enum {
ALC269_FIXUP_SONY_VAIO,
};
const static struct hda_verb alc269_sony_vaio_fixup_verbs[] = {
{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREFGRD},
{}
};
static const struct alc_fixup alc269_fixups[] = {
[ALC269_FIXUP_SONY_VAIO] = {
.verbs = alc269_sony_vaio_fixup_verbs
},
};
static struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x104d, 0x9071, "Sony VAIO", ALC269_FIXUP_SONY_VAIO),
{}
};
/*
* configuration and preset
*/
......@@ -14136,7 +14157,7 @@ static struct snd_pci_quirk alc269_cfg_tbl[] = {
ALC269_DMIC),
SND_PCI_QUIRK(0x1043, 0x8398, "ASUS P1005HA", ALC269_DMIC),
SND_PCI_QUIRK(0x1043, 0x83ce, "ASUS P1005HA", ALC269_DMIC),
SND_PCI_QUIRK(0x104d, 0x9071, "SONY XTB", ALC269_DMIC),
SND_PCI_QUIRK(0x104d, 0x9071, "Sony VAIO", ALC269_AUTO),
SND_PCI_QUIRK(0x10cf, 0x1475, "Lifebook ICH9M-based", ALC269_LIFEBOOK),
SND_PCI_QUIRK(0x152d, 0x1778, "Quanta ON1", ALC269_DMIC),
SND_PCI_QUIRK(0x1734, 0x115d, "FSC Amilo", ALC269_FUJITSU),
......@@ -14290,6 +14311,9 @@ static int patch_alc269(struct hda_codec *codec)
board_config = ALC269_AUTO;
}
if (board_config == ALC269_AUTO)
alc_pick_fixup(codec, alc269_fixup_tbl, alc269_fixups, 1);
if (board_config == ALC269_AUTO) {
/* automatic parse from the BIOS config */
err = alc269_parse_auto_config(codec);
......@@ -14342,6 +14366,9 @@ static int patch_alc269(struct hda_codec *codec)
set_capture_mixer(codec);
set_beep_amp(spec, 0x0b, 0x04, HDA_INPUT);
if (board_config == ALC269_AUTO)
alc_pick_fixup(codec, alc269_fixup_tbl, alc269_fixups, 0);
spec->vmaster_nid = 0x02;
codec->patch_ops = alc_patch_ops;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册