SIT or GRE tunnels might want to translate an IPV4 address
into a v4mapped one when translating ICMP to ICMPv6.

This patch adds the parameter to icmp6_send() but
does not change icmpv6_send() signature.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are two generics functions phy_ethtool_{get|set}_link_ksettings,
so we can use them instead of defining the same code in the driver.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phydev in the private structure, and update the driver to use the
one contained in struct net_device.
Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes the following sparse warnings:

net/rds/tcp.c:59:5: warning:
 symbol 'rds_tcp_min_sndbuf' was not declared. Should it be static?
net/rds/tcp.c:60:5: warning:
 symbol 'rds_tcp_min_rcvbuf' was not declared. Should it be static?
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove including <linux/version.h> that don't need it.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove including <linux/version.h> that don't need it.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'linux-can-next-for-4.8-20160617' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2016-06-17

this is a pull request of 14 patches for net-next/master.

Geert Uytterhoeven contributes a patch that adds a file patterns for
CAN device tree bindings to MAINTAINERS. A patch by Alexander Aring
fixes warnings when building without proc support. A patch by me
improves the sample point calculation. Marek Vasut's patch converts
the slcan driver to use CAN_MTU. A patch by William Breathitt Gray
converts the tscan1 driver to use module_isa_driver.

Two patches by Maximilian Schneider for the gs_usb driver fix coding
style and add support for set_phys_id callback. 5 patches by Oliver
Hartkopp add support for CANFD to the bcm. And finally two patches
by Ramesh Shanmugasundaram, which add support for the rcar_canfd
driver.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ivan Khoronzhuk says:

====================
net: ethernet: ti: cpsw: delete rx_descs property

There is no reason in rx_descs property because davinici_cpdma
driver splits pool of descriptors equally between tx and rx channels.
So, this patch series makes driver to use available number of
descriptors for rx channels.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no reason to hold s/w dependent parameter in device tree.
Even more, there is no reason in this parameter because davinici_cpdma
driver splits pool of descriptors equally between tx and rx channels
anyway.
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no reason in rx_descs property because davinici_cpdma
driver splits pool of descriptors equally between tx and rx channels.
That is, if number of descriptors 256, 128 of them are for rx
channels. While receiving, the descriptor is freed to the pool and
then allocated with new skb. And if in DT the "rx_descs" is set to
64, then 128 - 64 = 64 descriptors are always in the pool and cannot
be used, for tx, for instance. It's not correct resource usage,
better to set it to half of pool, then the rx pool can be used in
full. It will not have any impact on performance, as anyway, the
"redundant" descriptors were unused.
Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

"up_map" is a u64 type but we're not using the high 32 bits.

Fixes: 35c55c98 ('tipc: add neighbor monitoring framework')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

David Ahern says:

====================
net: vrf: Fix ipv6 source address selection

IPv6 address selection is currently messed up for several use cases such
as unnumbered deployments with global addresses on the VRF device and none
on the enslaved devices.

Update the source address selection to consider the real output route as
opposed to the VRF route that sends packets to the VRF device first (ie.,
implement get_saddr6 similar to the IPv4 method) and update the IPv6
address selection to consider L3 domains and preference for addresses on
the VRF device).
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IPv6 version of 3f2fb9a8 ("net: l3mdev: address selection should only
consider devices in L3 domain") and the follow up commit, a17b693cdd876
("net: l3mdev: prefer VRF master for source address selection").

That is, if outbound device is given then the address preference order
is an address from that device, an address from the master device if it
is enslaved, and then an address from a device in the same L3 domain.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IPv6 source address selection needs to consider the real egress route.
Similar to IPv4 implement a get_saddr6 method which is called if
source address has not been set.  The get_saddr6 method does a full
lookup which means pulling a route from the VRF FIB table and properly
considering linklocal/multicast destination addresses. Lookup failures
(eg., unreachable) then cause the source address selection to fail
which gets propagated back to the caller.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

VRF driver needs access to ip6_route_get_saddr code. Since it does
little beyond ipv6_dev_get_saddr and ipv6_dev_get_saddr is already
exported for modules move ip6_route_get_saddr to the header as an
inline.

Code move only; no functional change.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The variable i was declared but was never used and we were getting a
build warning for that.
Signed-off-by: NSudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Alexander Duyck says:

====================
Future-proof tunnel offload handlers

These patches are meant to address two things.  First we are currently
using the ndo_add/del_vxlan_port calls with VXLAN-GPE tunnels and we
cannot really support that as it is likely to cause more harm than
good since VXLAN-GPE can support tunnels without a MAC address on the
inner header.

As such we need to add a new offload to advertise this, but in doing so it
would mean introducing 3 new functions for the driver to request the ports,
and then for the tunnel to push the changes to add and delete the ports to
the device.  However instead of taking that approach I think it would be
much better if we just made one common function for fetching the ports, and
provided a generic means to push the tunnels to the device.  So in order to
make this work this patch set does several things.

First it merges the existing VXLAN and GENEVE functionality into one set of
functions and passes an enum in order to specify the type of tunnel we want
to offload.  By doing this we only have to extend this enum in the future
if we want to add additional types.

Second it goes through the drivers replacing all of the tunnel specific
offload calls with implementations that support the generic calls so that
we can drop the VXLAN and GENEVE specific calls entirely.

Finally I go through in the last patch and replace the VXLAN specific
offload request that was being used for VXLAN-GPE with one that specifies
if we want to offload VXLAN or VXLAN-GPE so that the hardware can decide if
it can actually support it or not.

I also ended up with some minor clean-up built into the driver patches for
this.  Most of it is to either fix misuse of build flags, specifying a type
to ignore instead of the type that should be used, or in the case of ixgbe
I actually moved a rtnl_lock/unlock in order to avoid taking it unless it
was actually needed.

v2:
I did my best to remove the word "offload" from any of the calls or
notifiers as this isn't really an offload.  It
 is a workaround for the fact that the drivers don't provide basic features
like CHECKSUM_COMPLETE.  I also added a disclaimer to the section defining
the function prototypes explaining that these are essentially workarounds.

I ended up going through and stripping all of the VXLAN and GENEVE build
flags from the drivers.  There isn't much point in carrying them.  In
addition I dropped the use of the vxlan.h or geneve.h header files in favor
of udp_tunnel.h in the cases where a driver didn't need anything from
either of those headers.

I updated the tunnel add/del functions so that they pass a udp_tunnel_info
structure instead of a list of arguments.  This way we should be able to
add additional information in the future with little impact on the other
drivers.

I updated bnxt so that it doesn't use a hard-coded port number for GENEVE.

I have been able to test mlx4e, mlx5e, and i40e and verified functionality
on these drivers.  Though there are patches for the net tree I submitted
due to unrelated bugs I found in the mlx4e and i40e/i40evf drivers.

v3:
Fixed a typo that caused us to add geneve port when we should have been
deleting it.

Ended up dropping geneve and vxlan wrappers for
udp_tunnel_notify_rx_add/del_port and instead just called them directly.

Updated comments for functions to call out RTNL instead of port lock.

Updated patch description to remove changes that were moved into a second
patch.

Rebased on latest net-next to fix merge conflict on bnxt driver.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The fact is VXLAN with Generic Protocol Extensions cannot be supported by
the same hardware parsers that support VXLAN.  The protocol extensions
allow for things like a Next Protocol field which in turn allows for things
other than Ethernet to be passed over the tunnel.  Most existing parsers
will not know how to interpret this.

To resolve this I am giving VXLAN-GPE its own UDP encapsulation offload
type.  This way hardware that does support GPE can simply add this type to
the switch statement for VXLAN, and if they don't support it then this will
fix any issues where headers might be interpreted incorrectly.
Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that we have all the drivers using udp_tunnel_get_rx_ports,
ndo_add_udp_enc_rx_port, and ndo_del_udp_enc_rx_port we can drop the
function calls that were specific to VXLAN and GENEVE.
Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This change replaces the network device operations for adding or removing a
VXLAN port with operations that are more generically defined to be used for
any UDP offload port but provide a type.  As such by just adding a line to
verify that the offload type is VXLAN we can maintain the same
functionality.
Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch goes through and combines the notifiers for VXLAN and GENEVE
into a single function for each action.  So there is now one combined
function for getting ports, one for adding the ports, and one for deleting
the ports.
Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This change replaces the network device operations for adding or removing a
VXLAN port with operations that are more generically defined to be used for
any UDP offload port but provide a type.  As such by just adding a line to
verify that the offload type is VXLAN we can maintain the same
functionality.
Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This change replaces the network device operations for adding or removing a
VXLAN port with operations that are more generically defined to be used for
any UDP offload port but provide a type.  As such by just adding a line to
verify that the offload type is VXLAN we can maintain the same
functionality.
Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This change replaces the network device operations for adding or removing a
VXLAN port with operations that are more generically defined to be used for
any UDP offload port but provide a type.  As such by just adding a line to
verify that the offload type is VXLAN we can maintain the same
functionality.

In addition I updated the socket address family check so that instead of
excluding IPv6 we instead abort of type is not IPv4.  This makes much more
sense as we should only be supporting IPv4 outer addresses on this
hardware.
Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This change replaces the network device operations for adding or removing a
VXLAN port with operations that are more generically defined to be used for
any UDP offload port but provide a type.  As such by just adding a line to
verify that the offload type is VXLAN we can maintain the same
functionality.

In addition I updated the socket address family check so that instead of
excluding IPv6 we instead abort of type is not IPv4.  This makes much more
sense as we should only be supporting IPv4 outer addresses on this
hardware.

The last change is that I pulled the rtnl_lock/unlock into the conditional
statement for IXGBE_FLAG2_VXLAN_REREG_NEEDED.  The motivation behind this
is to avoid unneeded bouncing of the mutex which will just slow down the
handling of this call anyway.
Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch goes through and combines the notifiers for VXLAN and GENEVE
into a single function for each action.  So there is now one combined
function for getting ports, one for adding the ports, and one for deleting
the ports.
Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This change replaces the network device operations for adding or removing a
VXLAN port with operations that are more generically defined to be used for
any UDP offload port but provide a type.  As such by just adding a line to
verify that the offload type if VXLAN we can maintain the same
functionality.
Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This change replaces the network device operations for adding or removing a
VXLAN port with operations that are more generically defined to be used for
any UDP offload port but provide a type.  As such by just adding a line to
verify that the offload type if VXLAN we can maintain the same
functionality.

I have also gone though and removed the BE2NET_VXLAN config option since it
no longer relies on the VXLAN code anyway.
Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The port number for GENEVE is hard coded into the bnxt driver.  This is the
kind of thing we want to avoid going forward.  For now I will integrate
this back into the port notifier so that we can change the GENEVE port
number if we need to in the future.
Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Acked-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch ends up doing several things.  First it updates the driver to
make use of the new unified UDP tunnel offload notifier functions.  In
addition I updated the code so that we can work around the bits that were
checking for if VXLAN was enabled since we are now using a notifier based
setup.
Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Acked-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch goes through and combines the notifiers for VXLAN and GENEVE
into a single function for each action.  So there is now one combined
function for getting ports, one for adding the ports, and one for deleting
the ports.

I also went through and dropped the BNX2X VXLAN and GENEVE specific build
flags.
Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch merges the notifiers for VXLAN and GENEVE into a single UDP
tunnel notifier.  The idea is that we will want to only have to make one
notifier call to receive the list of ports for VXLAN and GENEVE tunnels
that need to be offloaded.

In addition we add a new set of ndo functions named ndo_udp_tunnel_add and
ndo_udp_tunnel_del that are meant to allow us to track the tunnel meta-data
such as port and address family as tunnels are added and removed.  The
tunnel meta-data is now transported in a structure named udp_tunnel_info
which for now carries the type, address family, and port number.  In the
future this could be updated so that we can include a tuple of values
including things such as the destination IP address and other fields.

I also ended up going with a naming scheme that consisted of using the
prefix udp_tunnel on function names.  I applied this to the notifier and
ndo ops as well so that it hopefully points to the fact that these are
primarily used in the udp_tunnel functions.
Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch merges the GENEVE and VXLAN code so that both functions pass
through a shared code path.  This way we can start the effort of using a
single function on the network device drivers to handle both of these
tunnel types.
Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch makes it so that we add udp_tunnel.h to vxlan.h and geneve.h
header files.  This is useful as I plan to move the generic handlers for
the port offloads into the udp_tunnel header file and leave the vxlan and
geneve headers to be a bit more protocol specific.

I also went through and cleaned out a number of redundant includes that
where in the .h and .c files for these drivers.
Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch clubs the Renesas controller drivers in one rcar dir.
Signed-off-by: NRamesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

This patch adds support for the CAN FD controller found in Renesas R-Car
SoCs. The controller operates in CAN FD only mode by default.

CAN FD mode supports both Classical CAN & CAN FD frame formats. The
controller supports ISO 11898-1:2015 CAN FD format only.

This controller supports two channels and the driver can enable either
or both of the channels.

Driver uses Rx FIFOs (one per channel) for reception & Common FIFOs (one
per channel) for transmission. Rx filter rules are configured to the
minimum (one per channel) and it accepts Standard, Extended, Data &
Remote Frame combinations.

Note: There are few documentation errors in R-Car Gen3 Hardware User
Manual v0.5E with respect to CAN FD controller. They are listed below:

1. CAN FD interrupt numbers 29 & 30 are listed as per channel
interrupts. However, they are common to both channels (i.e.) they are
global and channel interrupts respectively.

2. CANFD clock is derived from PLL1. This is not documented.

3. CANFD clock is further divided by (1/2) within the CAN FD controller.
This is not documented.

4. The minimum value of NTSEG1 in RSCFDnCFDCmNCFG register is 2 Tq. It
is specified 4 Tq in the manual.

5. The maximum number of message RAM area the controller can use is 3584
bytes. It is specified 10752 bytes in the manual.
Signed-off-by: NRamesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Acked-by: NRob Herring <robh@kernel.org>
Reviewed-by: NUlrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

The programming API of the CAN_BCM depends on struct can_frame which is
given as array directly behind the bcm_msg_head structure. To follow this
schema for the CAN FD frames a new flag 'CAN_FD_FRAME' in the bcm_msg_head
flags indicates that the concatenated CAN frame structures behind the
bcm_msg_head are defined as struct canfd_frame.

This patch adds the support to handle CAN and CAN FD frames on a per BCM-op
base. Main changes:

- generally use struct canfd_frames instead if struct can_frames
- use canfd_frame.flags instead of can_frame.can_dlc for private BCM flags
- make all CAN frame sizes depending on the new CAN_FD_FRAME flags
- separate between CAN and CAN FD when sending/receiving frames

Due to the dependence of the CAN_FD_FRAME flag the former binary interface
for classic CAN frames remains stable.
Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

can_frame is the name of the struct can_frame which is not meant in
the corrected comments.
Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>