net: vrf: Implement get_saddr for IPv6

IPv6 source address selection needs to consider the real egress route.
Similar to IPv4 implement a get_saddr6 method which is called if
source address has not been set.  The get_saddr6 method does a full
lookup which means pulling a route from the VRF FIB table and properly
considering linklocal/multicast destination addresses. Lookup failures
(eg., unreachable) then cause the source address selection to fail
which gets propagated back to the caller.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/vrf.c

@@ -999,6 +999,46 @@ static struct dst_entry *vrf_get_rt6_dst(const struct net_device *dev,
 
 	return dst;
 }
+
+/* called under rcu_read_lock */
+static int vrf_get_saddr6(struct net_device *dev, const struct sock *sk,
+			  struct flowi6 *fl6)
+{
+	struct net *net = dev_net(dev);
+	struct dst_entry *dst;
+	struct rt6_info *rt;
+	int err;
+
+	if (rt6_need_strict(&fl6->daddr)) {
+		rt = vrf_ip6_route_lookup(net, dev, fl6, fl6->flowi6_oif,
+					  RT6_LOOKUP_F_IFACE);
+		if (unlikely(!rt))
+			return 0;
+
+		dst = &rt->dst;
+	} else {
+		__u8 flags = fl6->flowi6_flags;
+
+		fl6->flowi6_flags |= FLOWI_FLAG_L3MDEV_SRC;
+		fl6->flowi6_flags |= FLOWI_FLAG_SKIP_NH_OIF;
+
+		dst = ip6_route_output(net, sk, fl6);
+		rt = (struct rt6_info *)dst;
+
+		fl6->flowi6_flags = flags;
+	}
+
+	err = dst->error;
+	if (!err) {
+		err = ip6_route_get_saddr(net, rt, &fl6->daddr,
+					  sk ? inet6_sk(sk)->srcprefs : 0,
+					  &fl6->saddr);
+	}
+
+	dst_release(dst);
+
+	return err;
+}
 #endif
 
 static const struct l3mdev_ops vrf_l3mdev_ops = {
@@ -1008,6 +1048,7 @@ static const struct l3mdev_ops vrf_l3mdev_ops = {
 	.l3mdev_l3_rcv		= vrf_l3_rcv,
 #if IS_ENABLED(CONFIG_IPV6)
 	.l3mdev_get_rt6_dst	= vrf_get_rt6_dst,
+	.l3mdev_get_saddr6	= vrf_get_saddr6,
 #endif
 };
 

include/net/l3mdev.h

@@ -39,6 +39,9 @@ struct l3mdev_ops {
 	/* IPv6 ops */
 	struct dst_entry * (*l3mdev_get_rt6_dst)(const struct net_device *dev,
 						 struct flowi6 *fl6);
+	int		   (*l3mdev_get_saddr6)(struct net_device *dev,
+						const struct sock *sk,
+						struct flowi6 *fl6);
 };
 
 #ifdef CONFIG_NET_L3_MASTER_DEV
@@ -140,6 +143,8 @@ static inline bool netif_index_is_l3_master(struct net *net, int ifindex)
 int l3mdev_get_saddr(struct net *net, int ifindex, struct flowi4 *fl4);
 
 struct dst_entry *l3mdev_get_rt6_dst(struct net *net, struct flowi6 *fl6);
+int l3mdev_get_saddr6(struct net *net, const struct sock *sk,
+		      struct flowi6 *fl6);
 
 static inline
 struct sk_buff *l3mdev_l3_rcv(struct sk_buff *skb, u16 proto)
@@ -230,6 +235,12 @@ struct dst_entry *l3mdev_get_rt6_dst(struct net *net, struct flowi6 *fl6)
 	return NULL;
 }
 
+static inline int l3mdev_get_saddr6(struct net *net, const struct sock *sk,
+				    struct flowi6 *fl6)
+{
+	return 0;
+}
+
 static inline
 struct sk_buff *l3mdev_ip_rcv(struct sk_buff *skb)
 {

net/ipv6/ip6_output.c

@@ -910,6 +910,13 @@ static int ip6_dst_lookup_tail(struct net *net, const struct sock *sk,
 	int err;
 	int flags = 0;
 
+	if (ipv6_addr_any(&fl6->saddr) && fl6->flowi6_oif &&
+	    (!*dst || !(*dst)->error)) {
+		err = l3mdev_get_saddr6(net, sk, fl6);
+		if (err)
+			goto out_err;
+	}
+
 	/* The correct way to handle this would be to do
 	 * ip6_route_get_saddr, and then ip6_route_output; however,
 	 * the route-specific preferred source forces the
@@ -999,10 +1006,11 @@ static int ip6_dst_lookup_tail(struct net *net, const struct sock *sk,
 	return 0;
 
 out_err_release:
-	if (err == -ENETUNREACH)
-		IP6_INC_STATS(net, NULL, IPSTATS_MIB_OUTNOROUTES);
 	dst_release(*dst);
 	*dst = NULL;
+out_err:
+	if (err == -ENETUNREACH)
+		IP6_INC_STATS(net, NULL, IPSTATS_MIB_OUTNOROUTES);
 	return err;
 }
 

net/l3mdev/l3mdev.c

@@ -162,6 +162,30 @@ int l3mdev_get_saddr(struct net *net, int ifindex, struct flowi4 *fl4)
 }
 EXPORT_SYMBOL_GPL(l3mdev_get_saddr);
 
+int l3mdev_get_saddr6(struct net *net, const struct sock *sk,
+		      struct flowi6 *fl6)
+{
+	struct net_device *dev;
+	int rc = 0;
+
+	if (fl6->flowi6_oif) {
+		rcu_read_lock();
+
+		dev = dev_get_by_index_rcu(net, fl6->flowi6_oif);
+		if (dev && netif_is_l3_slave(dev))
+			dev = netdev_master_upper_dev_get_rcu(dev);
+
+		if (dev && netif_is_l3_master(dev) &&
+		    dev->l3mdev_ops->l3mdev_get_saddr6)
+			rc = dev->l3mdev_ops->l3mdev_get_saddr6(dev, sk, fl6);
+
+		rcu_read_unlock();
+	}
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(l3mdev_get_saddr6);
+
 /**
  *	l3mdev_fib_rule_match - Determine if flowi references an
  *				L3 master device