This isn't safe if we have multiple GPUs plugged in, since
there is only one copy of this struct in the bss, just allocate
on stack, it's 40/108 bytes which should be safe.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2:
move kcq_disable out of SRIOV, make it genearal
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

bo_free on csa is too late to put in amdgpu_fini because that
time ttm is already finished,
Move it earlier to avoid the page fault.
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Signed-off-by: NHorace Chen <horace.chen@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

currently in_reset is only used in sriov gpu reset, and it
will be used for other non-gfx hw component later, like
PSP, so move it from gfx to adev and rename to in_sriov_reset
make more sense.
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NFlora Cui <Flora.Cui@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Confirmed with the hw team.  It's the same for all asics.
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Newer versions of the CP firmware require changes in how the driver
initializes the hw block.
Change the firmware name for new firmware to maintain compatibility with
older kernels.
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This register only has a single instance in the hardware. Its value
applies to all VMIDS.
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>

Saves us even more loc.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Saves us quite a bunch of loc.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is just future proofing code, not something that can be triggered
in real life.  We're testing to make sure we don't shift wrap when we
do "1ull << i" so "i" has to be in the 0-63 range.  If it's 64 then we
have gone too far.
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

With previous golden settings, compute task can't use
reserved LDS (32K) on CU0 and CU1. On 64K LDS system,
if compute work group allocate more than 32K LDS, then
it can't be dispatched to CU0 and CU1 because of the
reservation. This enables compute task to use reserved
LDS on CU0 and CU1.
Signed-off-by: NOak Zeng <Oak.Zeng@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NFelix Kuehling <felix.kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Drop the deactivation in KIQ init and drop the KCQ disabling
via KIQ.  We disable the MEC shortly after anyway, so there is
no need to wait for all of this.  Doing so seems to leave the
MEC in a bad way.
Tested-by: NMichel Dänzer <michel.daenzer@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Newer asics with 4 SEs are not able to fit the entire bitmask in the
original field, use an array instead.

v2: keep cu_ao_mask for backward compatibility.
Signed-off-by: NFlora Cui <Flora.Cui@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

caused by not program dynamic_cu_mask_addr in the KIQ MQD.

v2: create struct vi_mqd_allocation in FB which will contain
1. PM4 MQD structure.
2. Write Pointer Poll Memory.
3. Read Pointer Report Memory
4. Dynamic CU Mask.
5. Dynamic RB Mask.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The interrupt registers are not indexed.

Fixes: 763a47b8 (drm/amdgpu: teach amdgpu how to enable interrupts for any pipe v3)
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It was duplicated across multiple generations.
Reviewed-by: NAlex Xie <AlexBin.Xie@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This will allow us to share more mec code.
Reviewed-by: NAlex Xie <AlexBin.Xie@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Lots more common stuff.
Reviewed-by: NAlex Xie <AlexBin.Xie@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

They are gfx related, not general helpers.
Reviewed-by: NAlex Xie <AlexBin.Xie@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Make it consistent.
Reviewed-by: NAlex Xie <AlexBin.Xie@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Same function was duplicated in all gfx IP files.
Reviewed-by: NAlex Xie <AlexBin.Xie@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fixes hangs on single MEC asics.

Fixes: 2ed286fb434 (drm/amdgpu: new queue policy, take first 2 queues of each pipe v2)
Reviewed-by: NAlex Xie <AlexBin.Xie@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The same function was duplicated in all the gfx IPs. Use
a single implementation for all.

v2: use static inline (Alex Xie)
Reviewed-by: NAlex Xie <AlexBin.Xie@amd.com>
Suggested-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Always use the max for the family rather than the per sku limits.
This makes sure the mask is always the max size to avoid reporting
the wrong number of CUs.
Reviewed-by: NAlex Xie <AlexBin.Xie@amd.com>
Reviewed-by: NAndres Rodriguez <andresx7@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Tonga based asics may experience hangs when an HQD's EOP parameters
are modified.

Workaround this HW issue by avoiding writes to these registers for
tonga asics.

Based on the following ROCm commit:
2a0fb8 - drm/amdgpu: Synchronize KFD HQD load protocol with CP scheduler

From the ROCm git repository:
https://github.com/RadeonOpenCompute/ROCK-Kernel-Driver.git

CC: Jay Cornwall <Jay.Cornwall@amd.com>
Suggested-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The MQD structure matches the reg layout. Take advantage of this to
simplify HQD programming.

Note that the ACTIVE field still needs to be programmed last.
Suggested-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Instead of taking the first pipe and giving the rest to kfd, take the
first 2 queues of each pipe.

Effectively, amdgpu and amdkfd own the same number of queues. But
because the queues are spread over multiple pipes the hardware will be
able to better handle concurrent compute workloads.

amdgpu goes from 1 pipe to 4 pipes, i.e. from 1 compute threads to 4
amdkfd goes from 3 pipe to 4 pipes, i.e. from 3 compute threads to 4

v2: fix policy comment
Reviewed-by: NEdward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Instead of picking an arbitrary queue for KIQ, search for one according
to policy. The queue must be unused.

Also report the KIQ as an unavailable resource to KFD.

In testing I ran into KCQ initialization issues when using pipes 2/3 of
MEC2 for the KIQ. Therefore the policy disallows grabbing one of these.

v2: fix (ring.me + 1) to (ring.me -1) in amdgpu_amdkfd_device_init
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The assumption that we are only using the first pipe no longer holds.
Instead, calculate the queue_mask from the queue_bitmap.
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Pipes provide better concurrency than queues, therefore we want to make
sure that apps use queues from different pipes whenever possible.

Optimize for the trivial case where an app will consume rings in order,
therefore we don't want adjacent rings to belong to the same pipe.
Reviewed-by: NEdward O'Callaghan <funfunctor@folklore1984.net>
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The current implementation is hardcoded to enable ME1/PIPE0 interrupts
only.

This patch allows amdgpu to enable interrupts for any pipe of ME1.

v2: added gfx9 support
v3: use soc15_grbm_select for gfx9
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Previously the queue/pipe split with kfd operated with pipe
granularity. This patch allows amdgpu to take ownership of an arbitrary
set of queues.

It also consolidates the last few magic numbers in the compute
initialization process into mec_init.

v2: support for gfx9
v3: renamed AMDGPU_MAX_QUEUES to AMDGPU_MAX_COMPUTE_QUEUES
v4: fix off-by-one in num_mec checks in *_compute_queue_acquire
Reviewed-by: NEdward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Make amdgpu the owner of all per-pipe state of the HQDs.

This change will allow us to split the queues between kfd and amdgpu
with a queue granularity instead of pipe granularity.

This patch fixes kfd allocating an HDP_EOP region for its 3 pipes which
goes unused.

v2: support for gfx9
v3: fix gfx7 HPD intitialization
Reviewed-by: NEdward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Rename straggler instances of r(adeon)dev to a(mdgpu)dev
Reviewed-by: NEdward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use the same gfx_*_mqd_commit function for kfd and amdgpu codepaths.

This removes the last duplicates of this programming sequence.

v2: fix cp_hqd_pq_wptr value
Reviewed-by: NEdward O'Callaghan <funfunctor@folklore1984.net>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Handle HQD deactivation timeouts instead of ignoring them.
Reviewed-by: NEdward O'Callaghan <funfunctor@folklore1984.net>
Acked-by: NChristian König <christian.koenig@amd.com>
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>