- 16 4月, 2014 1 次提交
-
-
由 Eric Dumazet 提交于
In the dst->output() path for ipv4, the code assumes the skb it has to transmit is attached to an inet socket, specifically via ip_mc_output() : The sk_mc_loop() test triggers a WARN_ON() when the provider of the packet is an AF_PACKET socket. The dst->output() method gets an additional 'struct sock *sk' parameter. This needs a cascade of changes so that this parameter can be propagated from vxlan to final consumer. Fixes: 8f646c92 ("vxlan: keep original skb ownership") Reported-by: Nlucien xin <lucien.xin@gmail.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 1月, 2014 1 次提交
-
-
由 Ying Xue 提交于
The following call chain we can identify that dn_cache_getroute() is protected under rtnl_lock. So if we use __dev_get_by_index() instead of dev_get_by_index() to find interface handlers in it, this would help us avoid to change interface reference counter. rtnetlink_rcv() rtnl_lock() netlink_rcv_skb() dn_cache_getroute() rtnl_unlock() Signed-off-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 12月, 2013 1 次提交
-
-
由 Steffen Klassert 提交于
FLOWI_FLAG_CAN_SLEEP was used to notify xfrm about the posibility to sleep until the needed states are resolved. This code is gone, so FLOWI_FLAG_CAN_SLEEP is not needed anymore. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
- 23 3月, 2013 1 次提交
-
-
由 Thomas Graf 提交于
Otherwise build fails with CONFIG_DECNET && !CONFIG_DECNET_ROUTER Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 3月, 2013 2 次提交
-
-
由 Thomas Graf 提交于
With decnet converted, we can finally get rid of rta_buf and its computations around it. It also gets rid of the minimal header length verification since all message handlers do that explicitly anyway. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
decnet is the only subsystem left that is relying on the global netlink attribute buffer rta_buf. It's horrible design and we want to get rid of it. This converts all of decnet to do implicit attribute parsing. It also gets rid of the error prone struct dn_kern_rta. Yes, the fib_magic() stuff is not pretty. It's compiled tested but I need someone with appropriate hardware to test the patch since I don't have access to it. Cc: linux-decnet-user@lists.sourceforge.net Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 2月, 2013 2 次提交
-
-
由 Gao feng 提交于
proc_net_remove is only used to remove proc entries that under /proc/net,it's not a general function for removing proc entries of netns. if we want to remove some proc entries which under /proc/net/stat/, we still need to call remove_proc_entry. this patch use remove_proc_entry to replace proc_net_remove. we can remove proc_net_remove after this patch. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gao feng 提交于
Right now, some modules such as bonding use proc_create to create proc entries under /proc/net/, and other modules such as ipv4 use proc_net_fops_create. It looks a little chaos.this patch changes all of proc_net_fops_create to proc_create. we can remove proc_net_fops_create after this patch. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 1月, 2013 1 次提交
-
-
由 Cong Wang 提交于
sock->sk_dst_cache is protected by RCU, therefore we should use __sk_dst_get() to deref it once we lock the sock. This fixes several sparse warnings. Cc: linux-decnet-user@lists.sourceforge.net Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <amwang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 9月, 2012 1 次提交
-
-
由 Eric W. Biederman 提交于
It is a frequent mistake to confuse the netlink port identifier with a process identifier. Try to reduce this confusion by renaming fields that hold port identifiers portid instead of pid. I have carefully avoided changing the structures exported to userspace to avoid changing the userspace API. I have successfully built an allyesconfig kernel with this change. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Acked-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 8月, 2012 1 次提交
-
-
由 Pavel Emelyanov 提交于
As pointed out, there are places, that access net->loopback_dev->ifindex and after ifindex generation is made per-net this value becomes constant equals 1. So go ahead and introduce the LOOPBACK_IFINDEX constant and use it where appropriate. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 8月, 2012 1 次提交
-
-
由 Eric Dumazet 提交于
commit 404e0a8b (net: ipv4: fix RCU races on dst refcounts) tried to solve a race but added a problem at device/fib dismantle time : We really want to call dst_free() as soon as possible, even if sockets still have dst in their cache. dst_release() calls in free_fib_info_rcu() are not welcomed. Root of the problem was that now we also cache output routes (in nh_rth_output), we must use call_rcu() instead of call_rcu_bh() in rt_free(), because output route lookups are done in process context. Based on feedback and initial patch from David Miller (adding another call_rcu_bh() call in fib, but it appears it was not the right fix) I left the inet_sk_rx_dst_set() helper and added __rcu attributes to nh_rth_output and nh_rth_input to better document what is going on in this code. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 7月, 2012 1 次提交
-
-
由 Eric Dumazet 提交于
commit c6cffba4 (ipv4: Fix input route performance regression.) added various fatal races with dst refcounts. crashes happen on tcp workloads if routes are added/deleted at the same time. The dst_free() calls from free_fib_info_rcu() are clearly racy. We need instead regular dst refcounting (dst_release()) and make sure dst_release() is aware of RCU grace periods : Add DST_RCU_FREE flag so that dst_release() respects an RCU grace period before dst destruction for cached dst Introduce a new inet_sk_rx_dst_set() helper, using atomic_inc_not_zero() to make sure we dont increase a zero refcount (On a dst currently waiting an rcu grace period before destruction) rt_cache_route() must take a reference on the new cached route, and release it if was not able to install it. With this patch, my machines survive various benchmarks. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 7月, 2012 1 次提交
-
-
由 David S. Miller 提交于
It's an ipv4 defined route flag, and only ipv4 uses it. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 7月, 2012 1 次提交
-
-
由 David S. Miller 提交于
Add a big comment explaining how the field works, and use defines instead of magic constants for the values assigned to it. Suggested by Joe Perches. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 7月, 2012 1 次提交
-
-
由 David S. Miller 提交于
This will be used so that we can compose a full flow key. Even though we have a route in this context, we need more. In the future the routes will be without destination address, source address, etc. keying. One ipv4 route will cover entire subnets, etc. In this environment we have to have a way to possess persistent storage for redirects and PMTU information. This persistent storage will exist in the FIB tables, and that's why we'll need to be able to rebuild a full lookup flow key here. Using that flow key will do a fib_lookup() and create/update the persistent entry. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 7月, 2012 1 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 7月, 2012 2 次提交
-
-
由 David S. Miller 提交于
Nobody provides non-zero values any longer. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
We don't maintain it dynamically any longer, so reporting it would be extremely misleading. Report zero instead. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 7月, 2012 2 次提交
-
-
由 David S. Miller 提交于
This allows an easy conversion away from dst_get_neighbour*(). Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Causes the handler to use the daddr in the ipv4/ipv6 header when the route gateway is unspecified (local subnet). Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 6月, 2012 1 次提交
-
-
由 Thomas Graf 提交于
Also, no need to trim on nlmsg_put() failure, nothing has been added yet. We also want to use nlmsg_end(), nlmsg_new() and nlmsg_free(). Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 6月, 2012 1 次提交
-
-
由 David S. Miller 提交于
And use nlmsg_data() while we're here too. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 5月, 2012 1 次提交
-
-
由 Joe Perches 提交于
Standardize the net core ratelimited logging functions. Coalesce formats, align arguments. Change a printk then vprintk sequence to use printf extension %pV. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 4月, 2012 1 次提交
-
-
由 Eric Dumazet 提交于
Use of "unsigned int" is preferred to bare "unsigned" in net tree. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 2月, 2012 1 次提交
-
-
由 Jesper Juhl 提交于
The variable 'neigh' is assigned to, but otherwise completely unused. So let's remove it. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 12月, 2011 1 次提交
-
-
由 David Miller 提交于
To reflect the fact that a refrence is not obtained to the resulting neighbour entry. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NRoland Dreier <roland@purestorage.com>
-
- 27 11月, 2011 2 次提交
-
-
由 Steffen Klassert 提交于
We move all mtu handling from dst_mtu() down to the protocol layer. So each protocol can implement the mtu handling in a different manner. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steffen Klassert 提交于
We plan to invoke the dst_opt->default_mtu() method unconditioally from dst_mtu(). So rename the method to dst_opt->mtu() to match the name with the new meaning. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 11月, 2011 1 次提交
-
-
由 Paul Gortmaker 提交于
These files are non modular, but need to export symbols using the macros now living in export.h -- call out the include so that things won't break when we remove the implicit presence of module.h from everywhere. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 18 7月, 2011 3 次提交
-
-
由 David S. Miller 提交于
In the future dst entries will be neigh-less. In that environment we need to have an easy transition point for current users of dst->neighbour outside of the packet output fast path. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
dst_{get,set}_neighbour() Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This will get us closer to being able to do "neigh stuff" completely independent of the underlying dst_entry for protocols (ipv4/ipv6) that wish to do so. We will also be able to make dst entries neigh-less. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 7月, 2011 1 次提交
-
-
由 Joe Perches 提交于
Make the case labels the same indent as the switch. git diff -w shows differences for line wrapping. (fit multiple lines to 80 columns, join where possible) Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 6月, 2011 1 次提交
-
-
由 Greg Rose 提交于
The message size allocated for rtnl ifinfo dumps was limited to a single page. This is not enough for additional interface info available with devices that support SR-IOV and caused a bug in which VF info would not be displayed if more than approximately 40 VFs were created per interface. Implement a new function pointer for the rtnl_register service that will calculate the amount of data required for the ifinfo dump and allocate enough data to satisfy the request. Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 29 4月, 2011 2 次提交
-
-
由 David S. Miller 提交于
Make dst_alloc() and it's users explicitly initialize the entire entry. The zero'ing done by kmem_cache_zalloc() was almost entirely redundant. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Now the dst->dev, dev->obsolete, and dst->flags values can be specified as well. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 3月, 2011 2 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
I intend to turn struct flowi into a union of AF specific flowi structs. There will be a common structure that each variant includes first, much like struct sock_common. This is the first step to move in that direction. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 3月, 2011 1 次提交
-
-
由 David S. Miller 提交于
Instead of on the stack. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-