1. 16 4月, 2014 1 次提交
  2. 12 4月, 2014 1 次提交
    • D
      net: Fix use after free by removing length arg from sk_data_ready callbacks. · 676d2369
      David S. Miller 提交于
      Several spots in the kernel perform a sequence like:
      
      	skb_queue_tail(&sk->s_receive_queue, skb);
      	sk->sk_data_ready(sk, skb->len);
      
      But at the moment we place the SKB onto the socket receive queue it
      can be consumed and freed up.  So this skb->len access is potentially
      to freed up memory.
      
      Furthermore, the skb->len can be modified by the consumer so it is
      possible that the value isn't accurate.
      
      And finally, no actual implementation of this callback actually uses
      the length argument.  And since nobody actually cared about it's
      value, lots of call sites pass arbitrary values in such as '0' and
      even '1'.
      
      So just remove the length argument from the callback, that way there
      is no confusion whatsoever and all of these use-after-free cases get
      fixed as a side effect.
      
      Based upon a patch by Eric Dumazet and his suggestion to audit this
      issue tree-wide.
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      676d2369
  3. 10 2月, 2014 2 次提交
  4. 19 1月, 2014 1 次提交
  5. 15 1月, 2014 1 次提交
  6. 11 12月, 2013 1 次提交
  7. 10 12月, 2013 1 次提交
  8. 06 12月, 2013 1 次提交
  9. 14 10月, 2013 1 次提交
  10. 13 6月, 2013 1 次提交
  11. 29 5月, 2013 1 次提交
  12. 08 4月, 2013 1 次提交
  13. 29 3月, 2013 1 次提交
  14. 23 3月, 2013 1 次提交
  15. 22 3月, 2013 2 次提交
  16. 28 2月, 2013 1 次提交
    • S
      hlist: drop the node parameter from iterators · b67bfe0d
      Sasha Levin 提交于
      I'm not sure why, but the hlist for each entry iterators were conceived
      
              list_for_each_entry(pos, head, member)
      
      The hlist ones were greedy and wanted an extra parameter:
      
              hlist_for_each_entry(tpos, pos, head, member)
      
      Why did they need an extra pos parameter? I'm not quite sure. Not only
      they don't really need it, it also prevents the iterator from looking
      exactly like the list iterator, which is unfortunate.
      
      Besides the semantic patch, there was some manual work required:
      
       - Fix up the actual hlist iterators in linux/list.h
       - Fix up the declaration of other iterators based on the hlist ones.
       - A very small amount of places were using the 'node' parameter, this
       was modified to use 'obj->member' instead.
       - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
       properly, so those had to be fixed up manually.
      
      The semantic patch which is mostly the work of Peter Senna Tschudin is here:
      
      @@
      iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;
      
      type T;
      expression a,c,d,e;
      identifier b;
      statement S;
      @@
      
      -T b;
          <+... when != b
      (
      hlist_for_each_entry(a,
      - b,
      c, d) S
      |
      hlist_for_each_entry_continue(a,
      - b,
      c) S
      |
      hlist_for_each_entry_from(a,
      - b,
      c) S
      |
      hlist_for_each_entry_rcu(a,
      - b,
      c, d) S
      |
      hlist_for_each_entry_rcu_bh(a,
      - b,
      c, d) S
      |
      hlist_for_each_entry_continue_rcu_bh(a,
      - b,
      c) S
      |
      for_each_busy_worker(a, c,
      - b,
      d) S
      |
      ax25_uid_for_each(a,
      - b,
      c) S
      |
      ax25_for_each(a,
      - b,
      c) S
      |
      inet_bind_bucket_for_each(a,
      - b,
      c) S
      |
      sctp_for_each_hentry(a,
      - b,
      c) S
      |
      sk_for_each(a,
      - b,
      c) S
      |
      sk_for_each_rcu(a,
      - b,
      c) S
      |
      sk_for_each_from
      -(a, b)
      +(a)
      S
      + sk_for_each_from(a) S
      |
      sk_for_each_safe(a,
      - b,
      c, d) S
      |
      sk_for_each_bound(a,
      - b,
      c) S
      |
      hlist_for_each_entry_safe(a,
      - b,
      c, d, e) S
      |
      hlist_for_each_entry_continue_rcu(a,
      - b,
      c) S
      |
      nr_neigh_for_each(a,
      - b,
      c) S
      |
      nr_neigh_for_each_safe(a,
      - b,
      c, d) S
      |
      nr_node_for_each(a,
      - b,
      c) S
      |
      nr_node_for_each_safe(a,
      - b,
      c, d) S
      |
      - for_each_gfn_sp(a, c, d, b) S
      + for_each_gfn_sp(a, c, d) S
      |
      - for_each_gfn_indirect_valid_sp(a, c, d, b) S
      + for_each_gfn_indirect_valid_sp(a, c, d) S
      |
      for_each_host(a,
      - b,
      c) S
      |
      for_each_host_safe(a,
      - b,
      c, d) S
      |
      for_each_mesh_entry(a,
      - b,
      c, d) S
      )
          ...+>
      
      [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
      [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
      [akpm@linux-foundation.org: checkpatch fixes]
      [akpm@linux-foundation.org: fix warnings]
      [akpm@linux-foudnation.org: redo intrusive kvm changes]
      Tested-by: NPeter Senna Tschudin <peter.senna@gmail.com>
      Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
      Signed-off-by: NSasha Levin <sasha.levin@oracle.com>
      Cc: Wu Fengguang <fengguang.wu@intel.com>
      Cc: Marcelo Tosatti <mtosatti@redhat.com>
      Cc: Gleb Natapov <gleb@redhat.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b67bfe0d
  17. 19 2月, 2013 2 次提交
  18. 11 2月, 2013 1 次提交
  19. 28 1月, 2013 1 次提交
  20. 12 1月, 2013 2 次提交
  21. 19 11月, 2012 1 次提交
  22. 06 10月, 2012 1 次提交
  23. 11 9月, 2012 1 次提交
  24. 09 9月, 2012 1 次提交
  25. 01 9月, 2012 1 次提交
  26. 10 8月, 2012 1 次提交
  27. 01 8月, 2012 1 次提交
    • E
      ipv4: Restore old dst_free() behavior. · 54764bb6
      Eric Dumazet 提交于
      commit 404e0a8b (net: ipv4: fix RCU races on dst refcounts) tried
      to solve a race but added a problem at device/fib dismantle time :
      
      We really want to call dst_free() as soon as possible, even if sockets
      still have dst in their cache.
      dst_release() calls in free_fib_info_rcu() are not welcomed.
      
      Root of the problem was that now we also cache output routes (in
      nh_rth_output), we must use call_rcu() instead of call_rcu_bh() in
      rt_free(), because output route lookups are done in process context.
      
      Based on feedback and initial patch from David Miller (adding another
      call_rcu_bh() call in fib, but it appears it was not the right fix)
      
      I left the inet_sk_rx_dst_set() helper and added __rcu attributes
      to nh_rth_output and nh_rth_input to better document what is going on in
      this code.
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      54764bb6
  28. 31 7月, 2012 1 次提交
    • E
      net: ipv4: fix RCU races on dst refcounts · 404e0a8b
      Eric Dumazet 提交于
      commit c6cffba4 (ipv4: Fix input route performance regression.)
      added various fatal races with dst refcounts.
      
      crashes happen on tcp workloads if routes are added/deleted at the same
      time.
      
      The dst_free() calls from free_fib_info_rcu() are clearly racy.
      
      We need instead regular dst refcounting (dst_release()) and make
      sure dst_release() is aware of RCU grace periods :
      
      Add DST_RCU_FREE flag so that dst_release() respects an RCU grace period
      before dst destruction for cached dst
      
      Introduce a new inet_sk_rx_dst_set() helper, using atomic_inc_not_zero()
      to make sure we dont increase a zero refcount (On a dst currently
      waiting an rcu grace period before destruction)
      
      rt_cache_route() must take a reference on the new cached route, and
      release it if was not able to install it.
      
      With this patch, my machines survive various benchmarks.
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      404e0a8b
  29. 24 7月, 2012 1 次提交
  30. 21 7月, 2012 1 次提交
  31. 17 7月, 2012 1 次提交
    • D
      net: Pass optional SKB and SK arguments to dst_ops->{update_pmtu,redirect}() · 6700c270
      David S. Miller 提交于
      This will be used so that we can compose a full flow key.
      
      Even though we have a route in this context, we need more.  In the
      future the routes will be without destination address, source address,
      etc. keying.  One ipv4 route will cover entire subnets, etc.
      
      In this environment we have to have a way to possess persistent storage
      for redirects and PMTU information.  This persistent storage will exist
      in the FIB tables, and that's why we'll need to be able to rebuild a
      full lookup flow key here.  Using that flow key will do a fib_lookup()
      and create/update the persistent entry.
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6700c270
  32. 12 7月, 2012 1 次提交
  33. 11 7月, 2012 2 次提交
  34. 05 7月, 2012 2 次提交