“41837ca962ecb4ae7d98b00f94a51e737c8384ea”上不存在“README.md”
- 14 12月, 2009 1 次提交
-
-
由 Russell King 提交于
Fix: arch/arm/mach-sa1100/generic.c:117: error: redefinition of 'cpufreq_get' include/linux/cpufreq.h:299: error: previous definition of 'cpufreq_get' was here cpufreq_get() is used on these platforms to tell drivers what the CPU frequency is, and therefore the bus frequency - which is critical for setting the PCMCIA and LCD timings. Adding ifdefs to these drivers to select cpufreq_get() or some other interface adds confusion. Making these drivers use some other interface for the normal paths and cpufreq stuff for the cpufreq notifier is insane as well. (Why x86 can't provide a version of cpufreq_get() which returns the CPU frequency when CPUFREQ is disabled is beyond me, rather than requiring a dummy zero-returning cpufreq_get(). Especially as they do: unsigned long khz = cpufreq_get(cpu); if (!khz) khz = tsc_khz; In other words, if CPUFREQ is disabled, get it from tsc_khz - why not provide a dummy cpufreq_get() which returns tsc_khz?) Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 07 12月, 2009 26 次提交
-
-
由 Dmitry Artamonow 提交于
Signed-off-by: NDmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dmitry Artamonow 提交于
Many features of h3100/h3600 (LCD, PCMCIA, Flash write, etc.) depend on correct functioning of GPIO expander handled by htc-egpio driver, so force its building in Kconfig. Signed-off-by: NDmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dmitry Artamonow 提交于
Add support for "Power" and "Action" (joystick center) buttons - the only buttons on iPaq h3100/h3600 connected to GPIOs (other buttons are controlled by microcontroller) Also remove setting PWER for wakeup on Power button press - gpio-keys driver will handle it. Signed-off-by: NDmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dmitry Artamonow 提交于
After a code reorganization and following split, there's some #includes now unused. Clean them up and sort remaining alphabetticaly where possible. Compile tested. Signed-off-by: NDmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dmitry Artamonow 提交于
Correct boilerplates after files split. Also shorten them a bit - use standart GPL wording (as per http://lkml.org/lkml/2007/5/1/220) and drop changelog, which only entry about h3800 support and abstracted EGPIOs is just confusing now, as both of these features are gone. Signed-off-by: NDmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dmitry Artamonow 提交于
Split common h3600.c into three separate files: h3100.c, h3600.c and h3xxx.c (the latter contains common code for h3100/h3600) Copyright boilerplates and #includes are copied intact and will be cleaned up later. Signed-off-by: NDmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dmitry Artamonow 提交于
Combine both headers into one, rename to h3xxx.h and change all users accordingly. Signed-off-by: NDmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dmitry Artamonow 提交于
As all existing code was converted to gpiolib, drop no more used pre-gpiolib (bit-shifted) GPIO definintions. Supply new gpiolib-friendly definitions for GPIOs which don't have them yet. Signed-off-by: NDmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dmitry Artamonow 提交于
After conversion to gpiolib there's still some GPIOs left, that get configured in *_mach_init() as outputs (using direct operations on GPCR/GPDR registers), but otherwise unused. These GPIOs are mainly sound related and should be configured by corresponding driver once it is written. Drop this initialisation and configure all GPIOs as input. Signed-off-by: NDmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dmitry Artamonow 提交于
As all the remaining users of these definitions (in pcmcia/sa1100_h3600 driver) were converted to gpio_to_irq(), they can be safely removed. Signed-off-by: NDmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dmitry Artamonow 提交于
As all users of assign_h3600_egpio now converted to gpiolib, we can safely remove all assign_h3600_egpio handling code and definitions. Signed-off-by: NDmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dmitry Artamonow 提交于
Use of gpio_request/gpio_free in some callbacks may look ugly, but corresponding drivers (sa1100_serial and sa1100_fb) don't provide (yet) init/exit hooks and registering these gpios in *_mach_init is also not possible, because htc-gpio driver starts a bit later... Signed-off-by: NDmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dmitry Artamonow 提交于
It will be used for future conversion of assign_h3600_egpio calls to gpiolib. Signed-off-by: NDmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dmitry Artamonow 提交于
h3100 and h3600 have different sets of LCD-controlling gpios, which mapped to the same "abstracted" EGPIO. As we plan to get rid of those abstracted egpios completely, we need to separate these helper functions. Signed-off-by: NDmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dmitry Artamonow 提交于
sa1100_fb driver handles this Signed-off-by: NDmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dmitry Artamonow 提交于
PM_SUSPEND, PM_RESUME and machine_is_h3xxx() are not used anywhere in kernel (checked with git grep), so it's safe to remove them. Signed-off-by: NDmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dmitry Artamonow 提交于
IRDA is handled by separate sa1100-ir driver and has nothing to do with sa1100_serial Signed-off-by: NDmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dmitry Artamonow 提交于
Signed-off-by: NDmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dmitry Artamonow 提交于
Signed-off-by: NDmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
The rtc-sa1100 driver takes care of this. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
No point calling sa1100_register_uart_fns early - these aren't used until late in the boot sequence. Also convert to gpiolib support. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Only register devices if we have platform data for those which require platform data. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 04 12月, 2009 1 次提交
-
-
由 André Goddard Rosa 提交于
That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: NAndré Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 28 11月, 2009 6 次提交
-
-
由 Thomas Kunze 提交于
This add the pda-power platform device to collie.
-
由 Thomas Kunze 提交于
Only the parts used for collie_battery are converted. The rest will be cleaned up later.
-
由 Thomas Kunze 提交于
The old access methods to the gpios will be removed when all users has been converted. (mainly ucb1x00-ts)
-
由 Thomas Kunze 提交于
The function can't be used for static initialisations so convert them to macros.
-
由 Thomas Kunze 提交于
prefix gpio definitions for direct register access with '_' so we can use the other names for gpio_request & co
-
由 Thomas Kunze 提交于
-
- 07 10月, 2009 1 次提交
-
-
由 Dmitry Artamonow 提交于
Both iPaqs h3100 and h3600 currently share the same source file - h3600.c But Makefile builds it only if CONFIG_SA1100_H3600 selected, so selecting just CONFIG_SA1100_H3100 results in "no machine record defined" message and aborted compilation. Fix it. Signed-off-by: NDmitry Artamonow <mad_soft@inbox.ru> Acked-by: NKristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 29 9月, 2009 2 次提交
-
-
由 Jaswinder Singh Rajput 提交于
Removed unused CONFIG SA1100_H3XXX from Kconfig and defconfig Reported-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Acked-by: NDmitry Artamonow <mad_soft@inbox.ru> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
8e19608e missed updating SA11x0, and thus: arch/arm/mach-sa1100/time.c:88: warning: initialization from incompatible pointer type Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 20 9月, 2009 1 次提交
-
-
由 Dmitry Artamonow 提交于
Declare it using DEFINE_SPINLOCK() Signed-off-by: NDmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 16 9月, 2009 1 次提交
-
-
由 Nicolas Pitre 提交于
Due to problems at cam.org, my nico@cam.org email address is no longer valid. FRom now on, nico@fluxnic.net should be used instead. Signed-off-by: NNicolas Pitre <nico@fluxnic.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 6月, 2009 1 次提交
-
-
由 Jean Delvare 提交于
fix ETIMEOUT -> ETIMEDOUT typos Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-