- 16 2月, 2010 21 次提交
-
-
由 Fenkart/Bostandzhyan 提交于
Adds DMA area to 'virtual memory map' startup message Tested-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NAndreas Fenkart <andreas.fenkart@streamunlimited.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Fenkart/Bostandzhyan 提交于
Code based on parisc and x86_32. Tested-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NAndreas Fenkart <andreas.fenkart@streamunlimited.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Santosh Shilimkar 提交于
This patch enables L2 cache and associated Errata on the OMAP4430 SDP. Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Santosh Shilimkar 提交于
This patch implements the work-around for the errata 588369.The secure API is used to alter L2 debug register because of trust-zone. This version updated with comments from Russell and Catalin and generated against 2.6.33-rc6 mainline kernel. Detail comments can be found: http://www.spinics.net/lists/linux-omap/msg23431.htmlSigned-off-by: NWoodruff Richard <r-woodruff2@ti.com> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Santosh Shilimkar 提交于
This patch adds L2 Cache support for OMAP4. External L2 cache is used in OMAP4 CC: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Santosh Shilimkar 提交于
This patch adds the cache maintainance by line helper functions. Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
If we're only reading the VFP context via the ptrace call, there's no need to invalidate the hardware context - we only need to do that on PTRACE_SETVFPREGS. This allows more efficient monitoring of a traced task. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
The more I look at vfp_sync_state(), the more I believe it's trying to do its job in a really obscure way. Essentially, last_VFP_context[] tracks who owns the state in the VFP hardware. If last_VFP_context[] is the context for the thread which we're interested in, then the VFP hardware has context which is not saved in the software state - so we need to bring the software state up to date. If last_VFP_context[] is for some other thread, we really don't care what state the VFP hardware is in; it doesn't contain any information pertinent to the thread we're trying to deal with - so don't touch the hardware. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
The generic ptrace_request() handles these for us, so there's no need to duplicate them in arch code. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Daniel Jacobowitz 提交于
Recognize 0xf7f0 0xa000 as a 32-bit breakpoint instruction for Thumb-2. Signed-off-by: NDaniel Jacobowitz <dan@codesourcery.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Tony Lindgren 提交于
Otherwise the kernel built with both CPU_V6 and CPU_V7 will not boot on omap2. Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Catalin Marinas 提交于
The current ASID allocation algorithm doesn't ensure the notification of the other CPUs when the ASID rolls over. This may lead to two processes using the same ASID (but different generation) or multiple threads of the same process using different ASIDs. This patch adds the broadcasting of the ASID rollover event to the other CPUs. To avoid a race on multiple CPUs modifying "cpu_last_asid" during the handling of the broadcast, the ASID numbering now starts at "smp_processor_id() + 1". At rollover, the cpu_last_asid will be set to NR_CPUS. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Jeremy Kerr 提交于
drivers/of/fdt expects a cmd_line symbol, while arm uses command_line. Change to the former, so that we can eventually share with the fdt code. Signed-off-by: NJeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Rabin Vincent 提交于
On ARMv7, the use of the cp15 operations for barriers is deprecated in favour of the isb, dsb, and dmb instructions. Change the locking functions to use the appropriate type of dsb for the architecture being built for. Signed-off-by: NRabin Vincent <rabin@rab.in> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Will Deacon 提交于
In preparation for perf-events support, ARM needs to support atomic64_t operations. v6k and above support the ldrexd and strexd instructions to do just that. This patch adds atomic64 support to the ARM architecture. v6k and above make use of new instructions whilst older cores fall back on the generic solution using spinlocks. If and when v7-M cores are supported by Linux, they will need to fall back on the spinlock implementation too. Signed-off-by: NWill Deacon <will.deacon@arm.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Kernel debuggers want to be informed of die() events, so that they can take some action to allow the problem to be inspected. Provide the hook in a similar manner to x86. Note that we currently don't implement the individual trap hooks. Acked-by: NJason Wessel <jason.wessel@windriver.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Jeremy Kerr 提交于
The ARM setup code includes its own parser for early params, there's also one in the generic init code. This patch removes __early_init (and related code) from arch/arm/kernel/setup.c, and changes users to the generic early_init macro instead. The generic macro takes a char * argument, rather than char **, so we need to update the parser functions a little. Signed-off-by: NJeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Always creating this directory avoids other users having to jump through silly hoops when they want to share this directory. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
All RTC drivers have been converted to rtclib, so the old code providing the set_rtc function pointer, save_time_delta() and restore_time_delta() functions is obsolete. Remove it. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
This allows the procfs vmallocinfo file to show who created the ioremap regions. Note: __builtin_return_address(0) doesn't do what's expected if its used in an inline function, so we leave __arm_ioremap callers in such places alone. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 13 1月, 2010 2 次提交
-
-
由 Russell King 提交于
A kernel with both ARMv6 and ARMv7 selected results in build errors. Fix this by specifying the proper architectures for these assembly files. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
The __kuser_cmpxchg code uses an ARMv6 dmb instruction, rather than one based upon the architecture being built for. Switch to using the macro provided for this purpose, which also eliminates the need for an ifdef. Acked-by: NNicolas Pitre <nico@fluxnic.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 12 1月, 2010 2 次提交
-
-
由 Albin Tonnerre 提交于
- changes to ach/arch/boot/Makefile to make it easier to add new compression types - new piggy.lzo.S necessary for lzo compression - changes in arch/arm/boot/compressed/misc.c to allow the use of lzo or gzip, depending on the config - Kconfig support Signed-off-by: NAlbin Tonnerre <albin.tonnerre@free-electrons.com> Tested-by: NWu Zhangjin <wuzhangjin@gmail.com> Acked-by: N"H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by: NRussell King <rmk@arm.linux.org.uk> Acked-by: NRussell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andreas Fenkart 提交于
Makes it consistent with the extern declaration, used when CONFIG_HIGHMEM is set Removes redundant casts in printout messages Signed-off-by: NAndreas Fenkart <andreas.fenkart@streamunlimited.com> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 1月, 2010 1 次提交
-
-
由 Colin Tuckley 提交于
Extend the patch from Philby John to the other "RealView" boards. Rename the constants and offsets to reflect their actual functions. Cc: Philby John <pjohn@in.mvista.com> Signed-off-by: NColin Tuckley <colin.tuckley@arm.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 10 1月, 2010 3 次提交
-
-
由 Santosh Shilimkar 提交于
The file arch/arm/include/asm/cpu.h needs to include 'linux/cpu.h' to meet its dependency. Otherwise when using "struct cpuinfo_arm" and including just 'asm/cpu.h' throws below error - arch/arm/include/asm/cpu.h:16: error: field 'cpu' has incomplete type To fix this otherway, one can also include both linux/cpu.h and asm/cpu.h but it shoudn't be that way. So this patch fixes this by including the linux/cpu.h in asm/cpu.h, so that including alone asm/cpu.h is enough. Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Peter Hüwe 提交于
This patch fixes a build failure [1] due to missing includes This should make the arm tree build again with lpd7a404_defconfig References: http://kisskb.ellerman.id.au/kisskb/buildresult/1983329/Signed-off-by: NPeter Huewe <peterhuewe@gmx.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Peter Hüwe 提交于
A lot of ARM-defconfigs (those without CONFIG_ISA_DMA_API set) fail to build [1][2][3] due to the changes of the patch [PATCH] PCI: Clean up build for CONFIG_PCI_QUIRKS unset by Rafael J. Wysocki (Sat, 2 Jan 2010 22:57:24 +0100) [4] as the referenced variable 'isa_dma_bridge_buggy' in asm/dma.h is enclosed by the CONFIG_ISA_DMA_API conditional all configs without this setting fail to build. I'm not sure wether moving the condition is the right way to solve the issue, but atleast it fixes the issue :) References: [1] http://kisskb.ellerman.id.au/kisskb/buildresult/1983354/ [2] http://kisskb.ellerman.id.au/kisskb/buildresult/1983333/ [3] http://kisskb.ellerman.id.au/kisskb/buildresult/1983337/ [4] http://lkml.org/lkml/2010/1/2/102Signed-off-by: NPeter Huewe <peterhuewe@gmx.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 09 1月, 2010 11 次提交
-
-
由 Paul Walmsley 提交于
Dynamically allocate the CPUFreq frequency table on OMAP2xxx chips. This fixes some compilation problems, since the kernel may not know what chip it is running on until boot-time. This also reduces the size of the CPUFreq frequency table. Problem originally reported by Felipe Balbi <felipe.balbi@nokia.com>. Thanks also for comments on the patch from Felipe and Kevin. Signed-off-by: NPaul Walmsley <paul@pwsan.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
-
由 Paul Walmsley 提交于
A subsequent patch adds code on OMAP2xxx to dynamically allocate the CPUFreq frequency table in clk_init_cpufreq_table(), so for it to avoid a leak, it will need a corresponding function to free the memory. This patch adds clk_exit_cpufreq_table() with generic code to call a chip-specific variant inside the clockfw_lock spinlock via struct clk_functions. Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
由 Paul Walmsley 提交于
Revise some of the comments in the OMAP2xxx OPP data for clarity. Signed-off-by: NPaul Walmsley <paul@pwsan.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
-
由 Felipe Balbi 提交于
if we enable CPUFREQ we can't build omap2 for two reasons, one of them is fixed by the patch below. It's failing because the __must_be_array() check in ARRAY_SIZE() is failing and printing the following message: arch/arm/mach-omap2/clock2xxx.c:453: error: negative width in bit-field '<anonymous>' Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com> [paul@pwsan.com: commit message updated; changed rate variable name] Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
由 Cory Maccarrone 提交于
Commit 52650505 added an __initdata decoration to the structure containing the clk_enable and clk_disable functions. Once init data was freed, these pointers went to null, and the next enable or disable call caused the kernel to crash. This change removes this decoration. Signed-off-by: NCory Maccarrone <darkstar6262@gmail.com> [paul@pwsan.com: patch manually split and commit message edited] Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
由 Cory Maccarrone 提交于
This change adds in some missing clocks that were needed as a result of 526505... (OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c). Prior to this, it was just assumed that these clocks existed for all devices, and it was used directly instead of calling it out with a clock_get call or similar. So, not having the CK_7XX meant these clocks weren't being used anymore for omap 7xx devices, which broke things badly. Signed-off-by: NCory Maccarrone <darkstar6262@gmail.com> [paul@pwsan.com: commit message edited] Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
由 Paul Walmsley 提交于
The only symbols that should be exported are symbols that are to be called from loadable kernel modules, e.g., device drivers. In the context of plat-omap/clock.c, these should only be the Linux clock interface symbols as defined by include/linux/clk.h. Core code doesn't need these symbols to be exported. Also, clean up an old comment while here. Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
由 Tuukka Toivonen 提交于
Add necessary definitions to clock framework to allow changing dpll4_m5_ck rate. This is used by the camera code. Signed-off-by: NJouni Högander <jouni.hogander@nokia.com> Signed-off-by: NTuukka Toivonen <tuukka.o.toivonen@nokia.com> Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
由 Paul Walmsley 提交于
The correct parent of the McBSP 2, 3, and 4 functional clocks is PER_96M_FCLK, not CORE_96M_FCLK. Fix this in the OMAP clock tree. Reported by Nicole Chalhoub <n-chalhoub@ti.com>. Signed-off-by: NPaul Walmsley <paul@pwsan.com> Cc: Nicole Chalhoub <n-chalhoub@ti.com>
-
由 Kevin Hilman 提交于
UART1 & 2 were missing clockdomains resulting in broken omap_hwmod init for these devices. Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
由 Paul Walmsley 提交于
Commit 10db25fe causes the following kernel messages during N800 boot (and presumably all other 2420 boards): [ 0.000000] BUG: mapping for 0x58000000 at 0xe0000000 overlaps vmalloc space [ 0.000000] BUG: mapping for 0x59000000 at 0xe1000000 overlaps vmalloc space [ 0.000000] BUG: mapping for 0x5a000000 at 0xe2000000 overlaps vmalloc space Fix by remapping the IVA memory areas somewhere outside vmalloc space. Signed-off-by: NPaul Walmsley <paul@pwsan.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com>
-