netlink overrun was broken while improvement of netlink.
Destination socket is used in the place where it was meant to be source socket,
so that now overrun is never sent to user netlink sockets, when it should be,
and it even can be set on kernel socket, which results in complete deadlock
of rtnetlink.

Suggested fix is to restore status quo passing source socket as additional
argument to netlink_attachskb().

A little explanation: overrun is set on a socket, when it failed
to receive some message and sender of this messages does not or even
have no way to handle this error. This happens in two cases:
1. when kernel sends something. Kernel never retransmits and cannot
   wait for buffer space.
2. when user sends a broadcast and the message was not delivered
   to some recipients.
Signed-off-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Clear unblockable signals beforehand.
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Pointed out by Linus Torvalds.

sys_signal() forgets to initialize ->sa_mask.

( I suspect arch/ia64/ia32/ia32_signal.c:sys32_signal()
  also needs this fix )
Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The sparc64 64 bit syscall table seems to be broken as it has
compat_sys_newfstatat in its syscall table instead of sys_newfstatat.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 5e375bc7.

Kyle McMartin steps on his soap-box:

  "Sigh.  Can everyone please stop assuming gcc can output to /dev/null?
   On several platforms, ld tries to lseek in the output file, and fails
   if it can't."
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If you set network interface down and up again, the IPv6 address
autoconfiguration does not work. 'ip addr' shows that the link-local
address is in tentative state. We don't even react to periodical router
advertisements.

During NETDEV_DOWN we clear IF_READY, and we don't set it back in
NETDEV_UP. While starting to perform DAD on the link-local address, we
notice that the device is not in IF_READY, and we abort autoconfiguration
process (which would eventually send router solicitations).
Acked-by: NJuha-Matti Tapio <jmtapio@verkkotelakka.net>
Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add unshare syscall for x86-64

ppoll/pselect are not ready yet, but add reservations.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Manual conflict merge of arch/arm/Kconfig

An obvious vi fat finger on my part.
Signed-off-by: NJordan Crouse <jordan.crouse@amd.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Tony Lindgren

This patch fixes the low-level IO init for omap2 boards.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Tony Lindgren

This patch fixes the low-level IO init for omap1 boards.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Tony Lindgren

This patch adds the missing cache flushes to common low-level
init that are needed to access the IO region. These flushes
are normally done at the end of devicemaps_init(), but we
need to detect the OMAP core type early.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

Change the IRQ resource range for the ADC device
to be two distinct IRQs
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch adds new PCI serial card support.
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This replaces old direct usage of tty->flip stuff with relative flip API
calls.
Signed-off-by: NVitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The DB1550 actually doesn't have a UART2.  Remove it from the list.
Signed-off-by: NJordan Crouse <jordan.crouse@amd.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

On some embedded PowerPC (MPC834x) systems an extra byte would some
times be required to flush data out of the fifo.
serial8250_console_write() was updating the IER in hardware without
also updating the copy in uart_8250_port. This causes issues functions
like serial8250_start_tx() and __stop_tx() to misbehave.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Lucas Correia Villa Real

This patch defines the number of serial ports on the S3C2400.
Signed-off-by: NLucas Correia Villa Real <lucasvr@gobolinux.org>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Catalin Marinas

Because of a type, OSC1 was used for setting the display clock instead of
OSC4. This patch fixes it.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Nicolas Pitre

Since:

	if (unlikely(__res || __ex_flag))

produces worse code on ARM than:

	if (unlikely(__res | __ex_flag))

I therefore made it more explicit:

	__res |= __ex_flag;
	if (unlikely(__res != 0))

so it is not seen as a typo again.

Also made everything static inline rather than macros for better readability
(both produce the same code after all).

And finally added missing \t from multi-line assembly code.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

 negative

Patch from Nicolas Pitre

The pre ARMv5 implementation can be aborted if an exception occurs in
the middle of it.  Because of that, the ARMv6 implementation doesn't
re-attempt the operation on a failed strex either.  Let's make this
transient nature of such a false positive more explicit in the
definition.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Nicolas Pitre

The cmpxchg emulation on pre-ARMv5 relies on user code executed from a
kernel address.  If the operation cannot complete atomically, it is
aborted from the usr_entry macro by clearing the Z flag.  This clearing
of the Z flag is done whenever the user pc is above TASK_SIZE.

However this "pc >= TASK_SIZE" test cannot work in the non MMU case.
Worse: the current code will corrupt the Z flag on every entry to the
kernel.

Let's disable it in the non MMU case for now.  Using NPTL on non MMU
targets needs to be worked out anyway.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Nicolas Pitre

struct sockaddr_un loses its padding with EABI.  Since the size of the
structure is used as a validation test in unix_mkname(), we need to
change the length argument to 110 whenever it is 112.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Nicolas Pitre

Although OABI_COMPAT works fine in most cases, it is still experimental
and could be for ever since it is nearly impossible to handle
everything, e.g. ioctls.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

Bring s3c2410 defconfig up to date
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Martin Michlmayr

Minor typographical and spelling fixes in Konfig
Signed-off-by: NMartin Michlmayr <tbm@cyrius.com>

---

 Kconfig |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Martin Michlmayr

Add help descriptions to ARCH config items that don't have one.
Signed-off-by: NMartin Michlmayr <tbm@cyrius.com>

---

 Kconfig               |   32 ++++++++++++++++++++++++++++++--
 mach-clps711x/Kconfig |    2 ++
 2 files changed, 32 insertions(+), 2 deletions(-)
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

Move to using an enable count for the shared clocks
and protect the clock system using a mutex instead
of just disabling IRQs during the clock update.

Since there is little more code in the path for
non-shared clocks, the enable and disable calls
use the same code for each.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Lennert Buytenhek

Most ixp2000 boards don't actually work if pci=firmware isn't used, so
the defconfig isn't really the right place to specify this.  Instead of
specifying it in the defconfigs, make the relevant board code take care
of setting pci=firmware.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Lennert Buytenhek

The ixdp2x01_clock is already 50MHz by default, so no need to
override it with 50MHz in the ixdp2801 defconfig as is done now,
which is confusing as well.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Lennert Buytenhek

The ixdp2x01 pci init call doesn't check whether it's really running
on an ixdp2x01, making it impossible to compile one kernel that works
on both the ixdp2x01 and another ixp2000 board.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>