- 04 6月, 2016 1 次提交
-
-
由 Yangbo Lu 提交于
When the transmit hardware timestamping is enabled, an additional TxBD would be added and would be set as the last TxBD with TXBD_LAST and TXBD_INTERRUPT. However this has been broken by a patch recently. This made the software couldn't get transmit hardware timestamps and resulted in call trace. So, this patch is to fix this issue. Fixes: 48963b44 ("gianfar: Remove redundant ops for do_tstamp from xmit()") Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com> Reviewed-by: NClaudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 6月, 2016 1 次提交
-
-
由 Troy Kisky 提交于
If dirty_tx isn't updated, then dma_unmap_single can be called twice. This fixes a [ 58.420980] ------------[ cut here ]------------ [ 58.425667] WARNING: CPU: 0 PID: 377 at /home/schurig/d/mkarm/linux-4.5/lib/dma-debug.c:1096 check_unmap+0x9d0/0xab8() [ 58.436405] fec 2188000.ethernet: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=66 bytes] encountered by Holger Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com> Tested-by: <holgerschurig@gmail.com> Acked-by: NFugang Duan <fugang.duan@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 5月, 2016 1 次提交
-
-
由 Arnd Bergmann 提交于
Most users of IS_ERR_VALUE() in the kernel are wrong, as they pass an 'int' into a function that takes an 'unsigned long' argument. This happens to work because the type is sign-extended on 64-bit architectures before it gets converted into an unsigned type. However, anything that passes an 'unsigned short' or 'unsigned int' argument into IS_ERR_VALUE() is guaranteed to be broken, as are 8-bit integers and types that are wider than 'unsigned long'. Andrzej Hajda has already fixed a lot of the worst abusers that were causing actual bugs, but it would be nice to prevent any users that are not passing 'unsigned long' arguments. This patch changes all users of IS_ERR_VALUE() that I could find on 32-bit ARM randconfig builds and x86 allmodconfig. For the moment, this doesn't change the definition of IS_ERR_VALUE() because there are probably still architecture specific users elsewhere. Almost all the warnings I got are for files that are better off using 'if (err)' or 'if (err < 0)'. The only legitimate user I could find that we get a warning for is the (32-bit only) freescale fman driver, so I did not remove the IS_ERR_VALUE() there but changed the type to 'unsigned long'. For 9pfs, I just worked around one user whose calling conventions are so obscure that I did not dare change the behavior. I was using this definition for testing: #define IS_ERR_VALUE(x) ((unsigned long*)NULL == (typeof (x)*)NULL && \ unlikely((unsigned long long)(x) >= (unsigned long long)(typeof(x))-MAX_ERRNO)) which ends up making all 16-bit or wider types work correctly with the most plausible interpretation of what IS_ERR_VALUE() was supposed to return according to its users, but also causes a compile-time warning for any users that do not pass an 'unsigned long' argument. I suggested this approach earlier this year, but back then we ended up deciding to just fix the users that are obviously broken. After the initial warning that caused me to get involved in the discussion (fs/gfs2/dir.c) showed up again in the mainline kernel, Linus asked me to send the whole thing again. [ Updated the 9p parts as per Al Viro - Linus ] Signed-off-by: NArnd Bergmann <arnd@arndb.de> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.org/lkml/2016/1/7/363 Link: https://lkml.org/lkml/2016/5/27/486 Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> # For nvmem part Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 5月, 2016 6 次提交
-
-
由 Philippe Reynes 提交于
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Acked-by: NClaudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 5月, 2016 2 次提交
-
-
由 Philippe Reynes 提交于
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 5月, 2016 2 次提交
-
-
由 Florian Westphal 提交于
Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: NFlorian Westphal <fw@strlen.de> Acked-by: NFelipe Balbi <felipe.balbi@linux.intel.com> Acked-by: NMugunthan V N <mugunthanvnm@ti.com> Acked-by: NAntonio Quartulli <a@unstable.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Uwe Kleine-König 提交于
In the receive path a queue's work bit was cleared unconditionally even if fec_enet_rx_queue only read out a part of the available packets from the hardware. This resulted in not reading any packets in the next napi turn and so packets were delayed or lost. The obvious fix is to only clear a queue's bit when the queue was emptied. Fixes: 4d494cdc ("net: fec: change data structure to support multiqueue") Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: NLucas Stach <l.stach@pengutronix.de> Tested-by: NFugang Duan <fugang.duan@nxp.com> Acked-by: NFugang Duan <fugang.duan@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 5月, 2016 4 次提交
-
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move the fec_mpc52xx driver to new api {get|set}_link_ksettings. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move the fs-enet driver to new api {get|set}_link_ksettings. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move the ucc driver to new api {get|set}_link_ksettings. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move the gianfar driver to new api {get|set}_link_ksettings. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 4月, 2016 1 次提交
-
-
由 Masanari Iida 提交于
This patch fix spelling typos in printk from various part of the codes. Signed-off-by: NMasanari Iida <standby24x7@gmail.com> Acked-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 19 4月, 2016 1 次提交
-
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move the fec driver to new api {get|set}_link_ksettings. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Acked-by: NFugang Duan <fugang.duan@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 4月, 2016 1 次提交
-
-
由 Fabio Estevam 提交于
Commit 55cd48c8 ("net: fec: stop the "rcv is not +last, " error messages") introduces a write to a register that does not exist in Coldfire. Move the FEC_FTRL register access inside the FEC_QUIRK_HAS_RACC 'if' block, so that we guarantee it will not be used on Coldfire CPUs. Reported-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 3月, 2016 1 次提交
-
-
由 Igal Liberman 提交于
Errata A-007273 (For FMan V3 devices only): FMan soft reset is not finished properly if one of the Ethernet MAC clocks is disabled Workaround: Re-enable all disabled MAC clocks through the DCFG_CCSR_DEVDISR2 register prior to issuing an FMAN soft reset. Re-disable the MAC clocks after the FMAN soft reset is done. Signed-off-by: NIgal Liberman <igal.liberman@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 3月, 2016 1 次提交
-
-
由 Joonsoo Kim 提交于
The success of CMA allocation largely depends on the success of migration and key factor of it is page reference count. Until now, page reference is manipulated by direct calling atomic functions so we cannot follow up who and where manipulate it. Then, it is hard to find actual reason of CMA allocation failure. CMA allocation should be guaranteed to succeed so finding offending place is really important. In this patch, call sites where page reference is manipulated are converted to introduced wrapper function. This is preparation step to add tracepoint to each page reference manipulation function. With this facility, we can easily find reason of CMA allocation failure. There is no functional change in this patch. In addition, this patch also converts reference read sites. It will help a second step that renames page._count to something else and prevents later attempt to direct access to it (Suggested by Andrew). Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: NMichal Nazarewicz <mina86@mina86.com> Acked-by: NVlastimil Babka <vbabka@suse.cz> Cc: Minchan Kim <minchan@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 3月, 2016 1 次提交
-
-
由 Igal Liberman 提交于
Fix a bug introduced in e06a03bd (fsl/fman: fix the pause_time test) When pause_time is set to '0' - pause frames are disabled and there's no need to apply dTSEC-A003 Errata workaround. Signed-off-by: NIgal Liberman <igal.liberman@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 3月, 2016 2 次提交
-
-
由 Bernhard Walle 提交于
is actually "active high". Thanks for Troy Kisky for pointing that out. Since the patch is in linux-next, this patch is incremental and doesn't replace the original patch. Signed-off-by: NBernhard Walle <bernhard@bwalle.de> Acked-by: NFugang Duan <fugang.duan@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Atsushi Nemoto 提交于
Enable workaround for MPC8548E erratum eTSEC 106, "Excess delays when transmitting TOE=1 large frames". (see commit 53fad773 "gianfar: Enable eTSEC-20 erratum w/a for P2020 Rev1") This erratum was fixed in Rev 3.1.x. Signed-off-by: NAtsushi Nemoto <nemoto@toshiba-tops.co.jp> Acked-by: NClaudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 3月, 2016 1 次提交
-
-
由 Igal Liberman 提交于
Currently, in a case of error, dev_err is using fman->dev before its initialization and "(NULL device *)" is printed. This patch fixes this issue. Signed-off-by: NIgal Liberman <igal.liberman@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 2月, 2016 2 次提交
-
-
由 Yangbo Lu 提交于
Fix endianness for the 64-bit hardware timestamp value with be64_to_cpu to support both PowerPC platforms and ARM platforms. Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yangbo Lu 提交于
Replace get_of_u32 with standard helper function of_property_read_u32 since the latter can process cpu endianness. Signed-off-by: NYangbo Lu <yangbo.lu@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 2月, 2016 3 次提交
-
-
由 Claudiu Manoil 提交于
Timestamp BD status updates that can be merged into the same "do_tstamp" block, no need for extra save/restore to the BD area. The code is more readable too. Signed-off-by: NClaudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Claudiu Manoil 提交于
Signed-off-by: NClaudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Claudiu Manoil 提交于
Move the mapping of the head BD before the mapping of fragments. The TOE (h/w offload) decision logic block can be also moved up (as the TOE flag belongs to the head BD), resulting in more localized code (TOE logic vs BD mapping code blocks). Note that, for this h/w, the R (status) bit for the head BD of a S/G frame needs to be written last for a reliable transmission. For the fragmented skb case, a local variable is used to temporarily store the status info of the first BD, replacing a BD status read. A merge of 2 "if(do_tstamp)" blocks was also possible. Signed-off-by: NClaudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 2月, 2016 1 次提交
-
-
由 Bernhard Walle 提交于
We need that for a custom hardware that needs the reverse reset sequence. Signed-off-by: NBernhard Walle <bernhard@bwalle.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 2月, 2016 8 次提交
-
-
由 Troy Kisky 提交于
Unmap initial buffer on error. Don't free skb until it has been unmapped. Move cbd_bufaddr assignment closer to the mapping function. Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Troy Kisky 提交于
If you don't own it, you shouldn't write to it. Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Troy Kisky 提交于
Only the interrupt routine processes this condition. Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Troy Kisky 提交于
There is no need for complex macros every time we need to activate a queue. Also, no need to call skb_get_queue_mapping when we already know which queue it is using. Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Troy Kisky 提交于
This reduces code and gains speed. Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Troy Kisky 提交于
When first initialized, cur_tx points to the 1st entry in the queue, and dirty_tx points to the last. At this point, fec_enet_get_free_txdesc_num will return tx_ring_size -2. If tx_ring_size -2 entries are now queued, then fec_enet_get_free_txdesc_num should return 0, but it returns tx_ring_size instead. Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Troy Kisky 提交于
On an overrun, the other flags are not valid, so don't check them. Also, don't pass bad frames up the stack. Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Troy Kisky 提交于
Setting the FTRL register will stop the fec from trying to use multiple receive buffers. Signed-off-by: NTroy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-