gianfar: Enable eTSEC-106 erratum w/a for MPC8548E Rev2

Enable workaround for MPC8548E erratum eTSEC 106,
"Excess delays when transmitting TOE=1 large frames".
(see commit 53fad773 "gianfar: Enable eTSEC-20 erratum w/a
for P2020 Rev1")

This erratum was fixed in Rev 3.1.x.
Signed-off-by: NAtsushi Nemoto <nemoto@toshiba-tops.co.jp>
Acked-by: NClaudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/freescale/gianfar.c

@@ -1111,8 +1111,10 @@ static void __gfar_detect_errata_85xx(struct gfar_private *priv)
 
 	if ((SVR_SOC_VER(svr) == SVR_8548) && (SVR_REV(svr) == 0x20))
 		priv->errata |= GFAR_ERRATA_12;
+	/* P2020/P1010 Rev 1; MPC8548 Rev 2 */
 	if (((SVR_SOC_VER(svr) == SVR_P2020) && (SVR_REV(svr) < 0x20)) ||
-	    ((SVR_SOC_VER(svr) == SVR_P2010) && (SVR_REV(svr) < 0x20)))
+	    ((SVR_SOC_VER(svr) == SVR_P2010) && (SVR_REV(svr) < 0x20)) ||
+	    ((SVR_SOC_VER(svr) == SVR_8548) && (SVR_REV(svr) < 0x31)))
 		priv->errata |= GFAR_ERRATA_76; /* aka eTSEC 20 */
 }
 #endif