Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

When processing an MPA Start Request, if the listening endpoint is
DEAD, then abort the connection.

If the IWCM returns an error, then we must abort the connection and
release resources.  Also abort_connection() should not post a CLOSE
event, so clean that up too.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

If cxgb4_ofld_send() returns < 0, then send_fw_pass_open_req() must
free the request skb and the saved skb with the tcp header.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Always release the neigh entry in rx_pkt().

Based on original work by Santosh Rastapur <santosh@chelsio.com>.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

find_route() must treat loopback as a valid egress interface.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Signed-off-by: NKumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Signed-off-by: NKumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NKumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based on original work by Santosh Rastapur <santosh@chelsio.com>
Signed-off-by: NKumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

accept_cr() failed to set the arp error handler on a reused skb.  This
results in a kernel crash if the arp does indeed time out.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Move QP to TERMINATE instead to allow the peer to get the TERM
message. This bug wasn't detectable until newer FW that moves
connections out of RDMA mode as soon as an error is detected.

QP can exit RTS before the last AE arrives.  This was introduced by
changes in the FW to kick connections out of RDMA mode as soon as an
error is detected.  A side effect of this is that the driver can move
the QP out of RTS before the AE causing the connection to get kicked
out of RDMA mode is processed.  Fix for this is to always post async
errors even if the QP is out of RTS.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Add new cpl messages, cpl_act_open_req6 and cpl_t5_act_open_req6, for
initiating active open connections.

Use LLD api cxgb4_create_server and cxgb4_create_server6 for
initiating passive open connections. Similarly use cxgb4_remove_server
to remove the passive open connections in place of listen_stop.

Add support for iWARP over VLAN device and enable IPv6 support on VLAN device.

Make use of import_ep in c4iw_reconnect.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>

[ Fix build when IPv6 is disabled and make sure iw_cxgb4 is not built-in
  when ipv6 is a module.  - Roland ]
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Modify the type of local_addr and remote_addr fields in struct
iw_cm_id from struct sockaddr_in to struct sockaddr_storage to hold
IPv6 and IPv4 addresses uniformly.

Change the references of local_addr and remote_addr in cxgb4, cxgb3,
nes and amso drivers to match this.  However to be able to actully run
traffic over IPv6, low-level drivers have to add code to support this.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Reviewed-by: NSean Hefty <sean.hefty@intel.com>

[ Fix unused variable warnings when INFINIBAND_NES_DEBUG not set.
  - Roland ]
Signed-off-by: NRoland Dreier <roland@purestorage.com>

TCPCT uses option-number 253, reserved for experimental use and should
not be used in production environments.
Further, TCPCT does not fully implement RFC 6013.

As a nice side-effect, removing TCPCT increases TCP's performance for
very short flows:

Doing an apache-benchmark with -c 100 -n 100000, sending HTTP-requests
for files of 1KB size.

before this patch:
	average (among 7 runs) of 20845.5 Requests/Second
after:
	average (among 7 runs) of 21403.6 Requests/Second
Signed-off-by: NChristoph Paasch <christoph.paasch@uclouvain.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When neighbour table is full, dst_neigh_lookup/dst_neigh_lookup_skb will return
-ENOBUFS which is absolutely non zero, while all the code in kernel which use
above functions assume failure only on zero return which will cause panic. (for
example: : https://bugzilla.kernel.org/show_bug.cgi?id=54731).

This patch corrects above error with smallest changes to kernel source code and
also correct two return value check missing bugs in drivers/infiniband/hw/cxgb4/cm.c

Tested on my x86_64 SMP machine
Reported-by: NZhouyi Zhou <zhouzhouyi@gmail.com>
Tested-by: NZhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: NZhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Always bump the tcam_full stat. Also, bump wr reply timeout to 30 seconds.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adds support for Chelsio T5 adapter.
Enables T5's Write Combining feature.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Work requests are passed between the host and the firmware with a
"cookie".  This cookie is swapped to big-endian when passed to the
firmware and back to host endianness on return.  This swapping seems
to be implemented incorrectly.  Moreover, the byte swapping triggers
GCC warnings on 32 bit:

    drivers/infiniband/hw/cxgb4/cm.c: In function ‘passive_ofld_conn_reply’:
    drivers/infiniband/hw/cxgb4/cm.c:2803:12: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
    drivers/infiniband/hw/cxgb4/cm.c: In function ‘send_fw_pass_open_req’:
    drivers/infiniband/hw/cxgb4/cm.c:2941:16: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
    [...]

But byte swapping isn't needed as the firmware doesn't actually touch
the cookie.  Dropping byte swapping makes the warnings go away too.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Fixe the following types of sparse warnings
- cast to pointer from integer of different size
- cast from pointer to integer of different size
- incorrect type in assignment (different base types)
- incorrect type in argument 1 (different base types)
- cast from restricted __be64
- cast from restricted __be32
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

CPL_ABORT_REQ_RSS can come before TCP connection is established.  In
such case peer_abort was trying to remove the hwtid, which was not
inserted.  To avoid this we insert the hwtid when we are sure that we
are surely going to send passive accept request.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Don't wakeup threads blocked in rdma_init/rdma_fini if we are on
MPAv2, and want to retry connection with MPAv1.

Stop ep-timer on getting MPA version mismatch, before doing the
abort_connection - in process_mpa_request.

Take care to stop ep-timer in error paths for process_mpa_request.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Only reconnect if the endpoint wasn't freed.

peer_abort() should only attempt to reconnect if the endpoint wasn't
freed.  Also remove hwtid from the debugfs idr.

Add missing check for peer2peer in MPAv2 code

Use correct mpa version on reject.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The endpoint timeout logic had a race that could cause an endpoint
object to be freed while it was still on the timedout list.  This
can happen if the timer is stopped after it had fired, but before
the timedout thread processed the endpoint timeout.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

With newer firmware, we can get streaming data due to connection
errors before the driver moves the QP out of RTS.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Log AEs even if the QP isn't in RTS.  It is useful information.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The driver is currently releasing the last ref on the QP too early.
This can cause bus errors due to HW still fetching WRs from the HW
queue.  The fix is to keep a qp ref until we release the HW TID.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

With later firmware, the chances of getting streaming mode data after
we exit RTS is likely, so we don't need to warn for it.  The only real
case where we don't expect it is when the QP is in RTS.

Move QP to ERROR when streaming mode data received.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

If a FINI operation fails, then we need to ABORT instead of CLOSE.
Also, if we ABORT due to unexpected STREAMING data, then wake up
anybody blocked in FINI...
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

This error means the RDMA connection was knocked out of RDMA mode,
probably due to an error on the connection.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Retries active opens for INUSE errors.

Logs any active ofld_connect_wr error replies.

Sends ofld_connect_wr on same ctrlq. It needs to go  on the same control txq as
regular CPL active/passive messages.

Retries on active open replies with EADDRINUSE.

Uses active open fw wr only if active filter region is set.

Adds stat for ofld_connect_wr failures.

This patch also adds debugfs file to show endpoints.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

It establishes passive open connection through firmware work request. Passive
open connection will go through this path as now instead of listening server we
create a server filter which will redirect the incoming SYN packet to the
offload queue. After this driver tries to establish the connection using
firmware work request.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

It enables establishing active open connection using fw_ofld_connection work
request when cpl_act_open_rpl says TCAM full error which may be because
of LE hash collision. Current support is only for IPv4 active open connections.

Sets ntuple bits in active open requests. For T4 firmware greater than 1.4.10.0
ntuple bits are required to be set.

Adds nocong and enable_ecn module parameter options.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>

[ Move all FW return values to t4fw_api.h.  - Roland ]
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Use WARN rather than printk followed by WARN_ON(1), for conciseness.

A simplified version of the semantic patch that makes this transformation
is as follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression list es;
@@

-printk(
+WARN(1,
  es);
-WARN_ON(1);
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Acked-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

spatch with a semantic match is used to found this.
(http://coccinelle.lip6.fr/)
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

sparse correctly warns that if mpa->private_data_size is __be16, then
doing += on it is wrong, even if we do += htons(<something>) -- on a
little endian system, carries will go the wrong way.  Fix this up by
doing the addition in native byte order.
Acked-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

When using rping -c -a 0.0.0.0 with iw_cxgb4, the system crashes when
rdma_connect() is called.  ip_dev_find() will return NULL, but pdev is
accessed anyway.

Checking that pdev is NULL and returning -ENODEV prevents the system
from crashing.
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Acked-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

This allows dumping thousands of QPs.  Log active open failures of
interest.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Use GFP_ATOMIC in _insert_handle() if ints are disabled.

Don't panic if we get an abort with no endpoint found.  Just log a
warning.
Signed-off-by: NVipul Pandya <vipul@chelsio.com>
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>