If the MM is not active, only report the top-level PC.  Do not try to
access the address space.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Describe how we support two types of PMU setups, one with a single control
register and two counters stored in a single register, and another with
one control register per counter and each counter living in it's own
register.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When cpuc->n_events is zero, we actually don't do anything and we just
write the cpuc->pcr[0] value as-is without any modifications.

The "pcr = 0;" assignment there was just useless and confusing.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make the per-cpu pcr save area an array instead of one u64.

Describe how many PCR and PIC registers the chip has in the sparc_pmu
descriptor.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now specified in sparc_pmu descriptor.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Starting with SPARC-T4 we have a seperate PCR control register
for each performance counter, and there are absolutely no
restrictions on what events can run on which counters.

Add flags that we can use to elide the conflict and dependency
logic used to handle older chips.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

And, like for the PCR, allow indexing of different PIC register
numbers.

This also removes all of the non-__KERNEL__ bits from asm/perfctr.h,
nothing kernel side should include it any more.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

SPARC-T4 and later have multiple PCR registers, one for each
PIC counter.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We always need to pass the last sample period to
perf_sample_data_init(), otherwise the event distribution will be
wrong. Thus, modifiyng the function interface with the required period
as argument. So basically a pattern like this:

        perf_sample_data_init(&data, ~0ULL);
        data.period = event->hw.last_period;

will now be like that:

        perf_sample_data_init(&data, ~0ULL, event->hw.last_period);

Avoids unininitialized data.period and simplifies code.
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1333390758-10893-3-git-send-email-robert.richter@amd.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Disintegrate asm/system.h for Sparc.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
cc: sparclinux@vger.kernel.org

PERF_SAMPLE_BRANCH_* is disabled for:

 - SW events (sw counters, tracepoints)
 - HW breakpoints
 - ALL but Intel x86 architecture
 - AMD64 processors
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1328826068-11713-10-git-send-email-eranian@google.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

The cpu compatible string we look for is "SPARC-T3".

As far as memset/memcpy optimizations go, we treat this chip the same
as Niagara-T2/T2+.  Use cache initializing stores for memset, and use
perfetch, FPU block loads, cache initializing stores, and block stores
for copies.

We use the Niagara-T2 perf support, since T3 is a close relative in
this regard.  Later we'll add support for the new events T3 can
report, plus enable T3's new "sample" mode.

For now I haven't added any new ELF hwcap flags.  We probably need
to add a couple, for example:

T2 and T3 both support the population count instruction in hardware.

T3 supports VIS3 instructions, including support (finally) for
partitioned shift.  One can also now move directly between float
and integer registers.

T3 supports instructions meant to help with Galois Field and other HPC
calculations, such as XOR multiply.  Also there are "OP and negate"
instructions, for example "fnmul" which is multiply-and-negate.

T3 recognizes the transactional memory opcodes, however since
transactional memory isn't supported: 1) 'commit' behaves as a NOP and
2) 'chkpt' always branches 3) 'rdcps' returns all zeros and 4) 'wrcps'
behaves as a NOP.

So we'll need about 3 new elf capability flags in the end to represent
all of these things.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>
Signed-off-by: NArun Sharma <asharma@fb.com>
Reviewed-by: NEric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a NODE level to the generic cache events which is used to measure
local vs remote memory accesses. Like all other cache events, an
ACCESS is HIT+MISS, if there is no way to distinguish between reads
and writes do reads only etc..

The below needs filling out for !x86 (which I filled out with
unsupported events).

I'm fairly sure ARM can leave it like that since it doesn't strike me as
an architecture that even has NUMA support. SH might have something since
it does appear to have some NUMA bits.

Sparc64, PowerPC and MIPS certainly want a good look there since they
clearly are NUMA capable.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Miller <davem@davemloft.net>
Cc: Anton Blanchard <anton@samba.org>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1303508226.4865.8.camel@laptopSigned-off-by: NIngo Molnar <mingo@elte.hu>

The nmi parameter indicated if we could do wakeups from the current
context, if not, we would set some state and self-IPI and let the
resulting interrupt do the wakeup.

For the various event classes:

  - hardware: nmi=0; PMI is in fact an NMI or we run irq_work_run from
    the PMI-tail (ARM etc.)
  - tracepoint: nmi=0; since tracepoint could be from NMI context.
  - software: nmi=[0,1]; some, like the schedule thing cannot
    perform wakeups, and hence need 0.

As one can see, there is very little nmi=1 usage, and the down-side of
not using it is that on some platforms some software events can have a
jiffy delay in wakeup (when arch_irq_work_raise isn't implemented).

The up-side however is that we can remove the nmi parameter and save a
bunch of conditionals in fast paths.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Michael Cree <mcree@orcon.net.nz>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Don Zickus <dzickus@redhat.com>
Link: http://lkml.kernel.org/n/tip-agjev8eu666tvknpb3iaj0fg@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>

We have all the cpu related info in cpu.c - so move
the remaining functions to support /proc/cpuinfo to this file.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>

Extend the perf_pmu_register() interface to allow for named and
dynamic pmu types.

Because we need to support the existing static types we cannot use
dynamic types for everything, hence provide a type argument.

If we want to enumerate the PMUs they need a name, provide one.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20101117222056.259707703@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Fix a typo in:

  004417a6: perf, arch: Cleanup perf-pmu init vs lockup-detector

Which caused a build failure on Sparc, reported by Stephen Rothwell.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The perf hardware pmu got initialized at various points in the boot,
some before early_initcall() some after (notably arch_initcall).

The problem is that the NMI lockup detector is ran from early_initcall()
and expects the hardware pmu to be present.

Sanitize this by moving all architecture hardware pmu implementations to
initialize at early_initcall() and move the lockup detector to an explicit
initcall right after that.

Cc: paulus <paulus@samba.org>
Cc: davem <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1290707759.2145.119.camel@laptop>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Encoding is "(encoding << 16) | pic_mask"
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Neither the overcommit nor the reservation sysfs parameter were
actually working, remove them as they'll only get in the way.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Replace pmu::{enable,disable,start,stop,unthrottle} with
pmu::{add,del,start,stop}, all of which take a flags argument.

The new interface extends the capability to stop a counter while
keeping it scheduled on the PMU. We replace the throttled state with
the generic stopped state.

This also allows us to efficiently stop/start counters over certain
code paths (like IRQ handlers).

It also allows scheduling a counter without it starting, allowing for
a generic frozen state (useful for rotating stopped counters).

The stopped state is implemented in two different ways, depending on
how the architecture implemented the throttled state:

 1) We disable the counter:
    a) the pmu has per-counter enable bits, we flip that
    b) we program a NOP event, preserving the counter state

 2) We store the counter state and ignore all read/overflow events
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Changes perf_disable() into perf_pmu_disable().
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Since the current perf_disable() usage is only an optimization,
remove it for now. This eases the removal of the __weak
hw_perf_enable() interface.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Simple registration interface for struct pmu, this provides the
infrastructure for removing all the weak functions.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

sed -ie 's/const struct pmu\>/struct pmu/g' `git grep -l "const struct pmu\>"`
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
Cc: stephane eranian <eranian@googlemail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Michael Cree <mcree@orcon.net.nz>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Store the kernel and user contexts from the generic layer instead
of archs, this gathers some repetitive code.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NPaul Mackerras <paulus@samba.org>
Tested-by: NWill Deacon <will.deacon@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: David Miller <davem@davemloft.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Borislav Petkov <bp@amd64.org>

- Most archs use one callchain buffer per cpu, except x86 that needs
  to deal with NMIs. Provide a default perf_callchain_buffer()
  implementation that x86 overrides.

- Centralize all the kernel/user regs handling and invoke new arch
  handlers from there: perf_callchain_user() / perf_callchain_kernel()
  That avoid all the user_mode(), current->mm checks and so...

- Invert some parameters in perf_callchain_*() helpers: entry to the
  left, regs to the right, following the traditional (dst, src).
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NPaul Mackerras <paulus@samba.org>
Tested-by: NWill Deacon <will.deacon@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: David Miller <davem@davemloft.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Borislav Petkov <bp@amd64.org>

callchain_store() is the same on every archs, inline it in
perf_event.h and rename it to perf_callchain_store() to avoid
any collision.

This removes repetitive code.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NPaul Mackerras <paulus@samba.org>
Tested-by: NWill Deacon <will.deacon@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: David Miller <davem@davemloft.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Borislav Petkov <bp@amd64.org>

Need to mask out the existing event bits before OR'ing in
the new ones.

Noticed by Peter Zijlstra.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since now all modification to event->count (and ->prev_count
and ->period_left) are local to a cpu, change then to local64_t so we
avoid the LOCK'ed ops.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Clarify some of the transactional group scheduling API details
and change it so that a successfull ->commit_txn also closes
the transaction.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1274803086.5882.1752.camel@twins>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Convert to the transactional PMU API and remove the duplication of
group_sched_in().

[cross build only]
Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Acked-by: NDavid Miller <davem@davemloft.net>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1272002193.5707.65.camel@minggr.sh.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Like x86, when the function graph tracer is enabled, emit the ftrace
stub as well as the program counter it will be transformed back into.

We duplicate a lot of similar stack walking logic in 3 or 4 spots, so
eventually we should consolidate things like x86 does.

Thanks to Frederic Weisbecker for pointing this out.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>