This reverts commit edf3ff5b.

This revert is necessary to revert the broken "RTC: sa1100:
support sa1100, pxa and mmp soc families" change.

Randomization of PIE load address is hard coded in binfmt_elf.c for X86
and ARM.  Create a new Kconfig variable
(CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE) for this and use it instead.  Thus
architecture specific policy is pushed out of the generic binfmt_elf.c and
into the architecture Kconfig files.

X86 and ARM Kconfigs are modified to select the new variable so there is
no change in behavior.  A follow on patch will select it for MIPS too.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The Telechips subarchitecture is being completely removed.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Harry Sievers <hsievers@csselectronic.com>
Signed-off-by: NHans J. Koch <hjk@hansjkoch.de>

This patch adds clk_prepare/clk_unprepare for mxs clock api by
renaming the existing non-atomic clk_enable/clk_disable to
clk_prepare/clk_unprepare and adding a pair of dummy
clk_enable/clk_disable.  Then with selecting HAVE_CLK_PREPARE for
mxs clock, we can fix the mutex locking warning that has been
reported for a few times.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Signed-off-by: NJett.Zhou <jtzhou@marvell.com>
Acked-by: NHaojian Zhuang <haojian.zhuang@gmail.com>
Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Add default value for CONFIG_ARCH_NR_GPIO to Kconfig and remove the
definition in gpio.h. We can't remove gpio.h yet as asm/gpio.h still
includes it.
Signed-off-by: NPeter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add default value for CONFIG_ARCH_NR_GPIO to Kconfig and remove the
definition in gpio.h.
Signed-off-by: NPeter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Change ARCH_NR_GPIO into a Kconfig variable as suggested by Russel King.
This makes ARCH_NR_GPIO single zImage friendly. The default value for
tegra is defined as well.
Signed-off-by: NPeter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Activation conditions for a workaround should not be encoded in the
workaround's direct dependencies if this makes otherwise reasonable
configuration choices impossible.

This patches uses the SMP/UP patching facilities instead to compile
out the workaround if the configuration means that it is definitely
not needed.

This means that configs for buggy silicon can simply select
ARM_ERRATA_751472, without preventing a UP kernel from being built
or duplicatiing knowledge about when to activate the workaround.
This seems the correct way to do things, because the erratum is a
property of the silicon, irrespective of what the kernel config
happens to be.
Signed-off-by: NDave Martin <dave.martin@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Activation conditions for a workaround should not be encoded in the
workaround's direct dependencies if this makes otherwise reasonable
configuration choices impossible.

The workaround for erratum 720789 only affects a code path which is
not active in UP kernels; hence it should be safe to turn on in UP
kernels, without penalty.

This patch simply removes the extra dependency on SMP from Kconfig.

This means that configs for buggy silicon can simply select
ARM_ERRATA_720789, without preventing a UP kernel from being built
or duplicatiing knowledge about when to activate the workaround.
Signed-off-by: NDave Martin <dave.martin@linaro.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

If running in the Normal World on a TrustZone-enabled SoC, Linux
does not have complete control over the L2 cache controller
configuration.  The kernel cannot work reliably on such platforms
without the l2x0 cache support code built in.

This patch unconditionally enables l2x0 support for the Highbank
SoC.

Thanks to Rob Herring for this suggestion.  [1]

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2011-November/074495.htmlSigned-off-by: NDave Martin <dave.martin@linaro.org>
Acked-by: NRob Herring <rob.herring@calxeda.com>

Making SMP depend on (huge list of MACH_ and ARCH_ configs) is
bothersome to maintain and likely to lead to merge conflicts.

This patch moves the knowledge of which platforms are SMP-capable
to the individual machines.  To enable this, a new HAVE_SMP config
option is introduced to allow machines to indicate that they can
run in a SMP configuration.
Signed-off-by: NDave Martin <dave.martin@linaro.org>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
        (for nomadik, ux500)
Acked-by: NTony Lindgren <tony@atomide.com>
        (for omap)
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
        (for exynos)
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
        (for imx)
Acked-by: NOlof Johansson <olof@lixom.net>
        (for tegra)

Making CACHE_L2X0 depend on (huge list of MACH_ and ARCH_ configs)
is bothersome to maintain and likely to lead to merge conflicts.

This patch moves the knowledge of which platforms have a L2x0 or
PL310 cache controller to the individual machines.  To enable this,
a new MIGHT_HAVE_CACHE_L2X0 config option is introduced to allow
machines to indicate that they may have such a cache controller
independently of each other.

Boards/SoCs which cannot reliably operate without the L2 cache
controller support will need to select CACHE_L2X0 directly from
their own Kconfigs instead.  This applies to some TrustZone-enabled
boards where Linux runs in the Normal World, for example.
Signed-off-by: NDave Martin <dave.martin@linaro.org>
Acked-by: NAnton Vorontsov <cbouatmailru@gmail.com>
        (for cns3xxx)
Acked-by: NTony Lindgren <tony@atomide.com>
        (for omap)
Acked-by: NShawn Guo <shawn.guo@linaro.org>
        (for imx)
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
        (for exynos)
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
        (for imx)
Acked-by: NOlof Johansson <olof@lixom.net>
        (for tegra)

Last merge window the memory maps for U300 were simplified so
we can now safely delete memory.h.
Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

All irq_desc's are now dynamically allocated so we don't need to
statically reserve them.

v2:	- select SPARSE_IRQ and set .nr_irqs to NR_IRQS_LEGACY to skip
	ISA and IRQ 0.
Signed-off-by: NJamie Iles <jamie@jamieiles.com>

Some Integrator core modules have TCM memory, so let's turn it on
if it's there.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Move the sizing of NR_BANKS to a Kconfig control instead of selecting
it in a header file depending on platform selection.  This allows new
additions to its dependencies to be handled more gracefully.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Sending IPI_CPU_STOP to a CPU causes it to execute a busy cpu_relax
loop forever. This makes it impossible to kexec successfully on an SMP
system since the secondary CPUs do not reset.

This patch adds a callback to platform_cpu_kill, defined when
CONFIG_HOTPLUG_CPU=y, from the ipi_cpu_stop handling code. This function
currently just returns 1 on all platforms that define it but allows them
to do something more sophisticated in the future.
Signed-off-by: NWill Deacon <will.deacon@arm.com>

This patch adds the ARM_LPAE and ARCH_PHYS_ADDR_T_64BIT Kconfig entries
allowing LPAE support to be compiled into the kernel.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Commit 1b9f95f8 (ARM: prepare for removal of a bunch of <mach/memory.h>
files) introduced CONFIG_PHYS_OFFSET but the Kconfig hex prompt did not
provide a default value.

This has the undesired side effect of breaking a reportedly used
trick for updating defconfigs on the fly for routine buildtesting
across all arch and all platforms, i.e.

	cp /path/to/somedefconfig .config ; yes "" | make oldconfig

because the config system will endlessly loop until a valid address is
provided.

However we can't just pick a random default value since it is likely to
be wrong for the majority of the boards as the right answer for this
option is quite varied.  So the fact that the config system insists on
having a proper value be entered is actually a good thing.

It turns out that only at91x40_defconfig has this problem because it has
CONFIG_MMU=n. However, in the !MMU case, there is already a CONFIG_DRAM_BASE
value that can be used here.  So let's use that as a default in that case
and suppress the redundant CONFIG_PHYS_OFFSET prompt.

Eventually the DRAM_BASE config option could simply be replaced by
PHYS_OFFSET directly, but that's a larger change better suited for later.
Reported-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NNicolas Pitre <nico@linaro.org>
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arm copied pci_iomap from generic code, probably to avoid
pulling the rest of iomap.c in.  Since that's in
a separate file now, we can reuse the common implementation.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The Kconfig options for the PL310 errata workarounds do not use a
consistent naming scheme for either the config option or the bool
description.

This patch tidies up the options by ensuring that the bool descriptions
are prefixed with "PL310 errata:" and the config options are prefixed
with PL310_ERRATA_, making it much clearer in menuconfig as to what the
workarounds are for.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch implements a workaround for PL310 erratum 769419. On
revisions of the PL310 prior to r3p2, the Store Buffer does not
automatically drain. This can cause normal, non-cacheable writes to be
retained when the memory system is idle, leading to suboptimal I/O
performance for drivers using coherent DMA.

This patch adds an optional wmb() call to the cpu_idle loop. On systems
with an outer cache, this causes an explicit flush of the store buffer.

Cc: stable@vger.kernel.org
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Tested-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Now that all platforms are converted to MULTI_IRQ_HANDLER, remove the
legacy support.
Tested-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NJamie Iles <jamie@jamieiles.com>

Now that there is a generic IRQ handler for multiple VIC devices use it
for picoxcell to help building multi platform kernels.
Signed-off-by: NJamie Iles <jamie@jamieiles.com>

Now that there is a generic IRQ handler for multiple VIC devices use it
for samsung to help building multi platform kernels.

Cc: Kukjin Kim <kgene.kim@samsung.com>
Tested-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NJamie Iles <jamie@jamieiles.com>

Now that there is a generic IRQ handler for multiple VIC devices use it
for versatile to help building multi platform kernels.

Cc: Russell King <linux@arm.linux.org.uk>
Tested-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NJamie Iles <jamie@jamieiles.com>

Now that there is a generic IRQ handler for multiple VIC devices use it
for u300 to help building multi platform kernels.
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NJamie Iles <jamie@jamieiles.com>

Now that there is a generic IRQ handler for multiple VIC devices use it
for spear to help building multi platform kernels.
Acked-by: NViresh Kumar <viresh.kumar@st.com>
Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: NJamie Iles <jamie@jamieiles.com>

Now that there is a generic IRQ handler for multiple VIC devices use it
for s3c64xx to help building multi platform kernels.

Cc: Ben Dooks <ben-linux@fluff.org>
Tested-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NJamie Iles <jamie@jamieiles.com>

Now that there is a generic IRQ handler for multiple VIC devices use it
for nomadik to help building multi platform kernels.

Cc: Alessandro Rubini <rubini@unipv.it>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Cc: STEricsson <STEricsson_nomadik_linux@list.st.com>
Tested-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NJamie Iles <jamie@jamieiles.com>

Now that there is a generic IRQ handler for multiple VIC devices use it
for netx to help building multi platform kernels.
Signed-off-by: NJamie Iles <jamie@jamieiles.com>

Now that there is a generic IRQ handler for multiple VIC devices use it
for ep93xx to help building multi platform kernels.

Cc: Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ryan Mallon <rmallon@gmail.com>
Signed-off-by: NJamie Iles <jamie@jamieiles.com>

Now that MULTI_IRQ_HANDLER is selected by all the in-tree
GIC users, make it mandatory and remove the unused macros.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Convert the zynq platform to be using the gic_handle_irq
function as its primary interrupt handler.
Acked-by: NJohn Linn <john.linn@xilinx.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Convert the cns3xxx platform to be using the gic_handle_irq
function as its primary interrupt handler.
Acked-by: NAnton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Convert the Exynos4 platforms to be using the gic_handle_irq
function as their primary interrupt handler.

Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Convert the VExpress platform to be using the gic_handle_irq
function as its primary interrupt handler.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Convert the RealView platforms to be using the gic_handle_irq
function as their primary interrupt handler.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

Convert the highbank platform to be using the gic_handle_irq
function as its primary interrupt handler.

Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>