Add a TODO file for emxx_udc to show what is left to do.
Signed-off-by: NMagnus Damm <damm+renesas@opensource.se>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Adjust the emxx_udc driver to make use of the standard
driver model to pass I/O memory and IRQ as resources
instead of hard coding those things in the driver.

Needs more work - the VBUS signal is yet not handled.
Signed-off-by: NMagnus Damm <damm+renesas@opensource.se>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add the emxx_udc driver to staging based on an old linux-2.6.35.7
android tree. The driver has been brushed up slightly to complile
but it is still in great need of cleanup.

At this point DT bindings are clearly lacking and I doubt that the
driver even can run with multiple instances (global variables, hurray!).
Signed-off-by: NMagnus Damm <damm+renesas@opensource.se>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit cc0be81f, it was
incorrect.
Reported-by: NJulia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The drivers that include ni_mio_common.c set the stc register read/write
callbacks to private functions that handle the read/write operations in
the correct manner for the hardware.

The ni_atmio and ni_mio_cs drivers use identical code to handle the
operations.

The ni_pcimio driver is a bit different due to the non-windowed setup
of the stc registers on the m series boards. For the other boards
supported by the ni_pcimio driver, the direct access of the first 8
STC registers is also disabled due to a difference on the 611x devices.

These differences can all be handled in the ni_stc_{read,write}[lw]()
helpers. Refactor the helpers and remove the callbacks from the private
data.

Also, move the helper functions the handle the mapping of the windowed
STC register offsets to M series register offset from ni_pcimio.c to
ni_mio_common.c.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The drivers that include ni_mio_common.c set the read/write callbacks
to private functions that handle the read/write operations in the
correct manner for the hardware. The ni_atmio and ni_mio_cs drivers
use ioport register access and the ni_pcimio driver uses memory mapped
register access. The memory mapped base address is stored in the 'mite'
pointer in the private data which is only allocated and initialized by
the ni_pcimio driver.

Detect the need for memory mapped register access by checking if the
'mite' pointer is set in the private data and remove the callbacks
from the private data.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The ni_atmio, ni_pcimio, and ni_mio_cs drivers all include this source
file to handle the common functionality of the drivers. Each of those
drivers set some function pointers in the private data to handle the
read/write operations to the normal registers.

Like done for the stc register operations, wrap these operations with
some helper functions to clarify the code a bit and make it easier to
read and maintain.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The ni_atmio, ni_pcimio, and ni_mio_cs drivers all include this source
file to handle the common functionality of the drivers. Each of those
drivers set some function pointers in the private data to handle the
read/write operations to the stc registers.

Wrap these operations with some helper functions to clarify the code
a bit and make it easier to read and maintain.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This function is used to enable/disable the second irq on NI e-series
boards. This irq used used to generate dma requests for the counters.

There are only 2 counters (NUM_GPCT) so the default case of the switch
can never occur.

Tidy up this function and remove the unreachable BUG().
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The (board->reg_type & ni_reg_m_series_mask) test is commonly used
in ni_mio_common.c to detect if the driver is being used with a
National Instruments "M series" DAQ board. Simplify the code a bit
by adding an 'is_m_series' bit-field flag to the private data.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This eliminates yet another user of rtw_get_capability23a_from_ie()
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Another case where the driver was copying IEs in front of the
probe_resp data in the management frame, when running in AP mode. This
would result in badly corrupted frames hitting the wire - ouf ouf ouf!
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Why on Earth we have two functions in the driver constructing beacon
frames is beyond me ... but one step at a time
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Not sure how this happened, but one should never copy the IEs in front
of the beacon frame info. This could lead to some nasty corrupted
beacon frames hitting the wire if running AP mode - ouf!
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This gets rid of a bunch of hard coded offsets and reduces the
dependency of the ugly rtw_get_*_from_ie() functions.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We already have the capability info in struct wlan_bssid_ex, no point
in searching for it once again.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull out the core info beacon_interval, capability, and tsf and update
cur_network.network with the info in rtw_add_beacon() instead of
relying on it being in ->IEs.

This will help later when getting rid of the beacon struct info from
->IEs and only carrying the actual IEs there.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This is to be more consistent mapping the names in wlan_bssid_ex to
those in struct ieee80211_mgmt.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

No point in pulling capability info out of the IE array when it's
already stored in struct wlan_bssid_ex
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the beacon interval we already retreived in collect_bss_info()
instead of pulling it out of the saved IE array again.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no point in creating a fake beacon frame to call
cfg80211_inform_bss_frame() when we can just call
cfg80211_inform_bss() with the parameters we were sticking into the
fake frame.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-3.17a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First round of new drivers, cleanups and functionality for the 3.17 cycle.

New drivers
* t5403 barometric pressure sensor
* kxcjk1013 accelerometer (with a locking followup fix).
* ak09911 digital compass

Documentation
* ABI docs for proximity added (interface has been there a long time but
  somehow snuck through without being documented)
* Move iio-trig-sysfs documentation out of staging (got left behind when
  the driver moved some time ago).

Cleanups
 * drop the timestamp argument from iio_trigger_poll(_chained) as
   nothing has been done with it for some time.
 * ad799x kerneldoc for ad799x_chip brought up to date.
 * replace a number of reimplementations of the GENMASK macro and
   use the BIT macro to cleanup a few locations.
 * bring the iio_event_monitor example program up to date with new
   device types.
 * fix some incorrect function prototypes in iio_utils.h example code.
 * INDIO_RING_TRIGGERED to INDIO_BUFFER_TRIGGERED fix in docs. This
   got left behind after we renamed it a long time back.
 * fix error handling in the generic_buffer example program.
 * small tidy ups in the iio-trig-periodic-rtc driver.
 * Allow reseting iio-trig-periodic-rtc frequency to 0 (default) after
   it has changed.
 * Trivial tidy ups in coding style in iio_simply_dummy

fixed: WARNING: suspect code indent for conditional statements (32, 32)
Signed-off-by: NAnil Belur <askb23@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

fixed: WARNING: line over 80 characters, used a new variable 'size_index' to
store the offset. Replaced "unsigned long" with  "loff_t" type for
'cur_index'. Removed the parenthesis around the second part of the if statement following the '||' as its not required.
Signed-off-by: NAnil Belur <askb23@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

fixed: ERROR: inline keyword should sit between storage class and type
Signed-off-by: NAnil Belur <askb23@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

fixed:  ERROR: do not initialise statics to 0 or NULL
Signed-off-by: NAnil Belur <askb23@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

fixed: WARNING: Missing a blank line after declarations
Signed-off-by: NAnil Belur <askb23@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

fixed warning:
* WARNING: min() should probably be min_t(__u32, desc.ld_tgt_count,
LOV_MAX_STRIPE_COUNT)
Signed-off-by: NAnil Belur <askb23@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

fixed "WARNING: labels should not be indented"
Signed-off-by: NAnil Belur <askb23@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed "ERROR: need consistent spacing around '+' (ctx:WxV)"
Signed-off-by: NAnil Belur <askb23@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the sparse warnings in drivers/staging/lustre/lustre/ptlrpc/sec_lproc.c:
sec_lproc.c:58:6: warning: symbol 'sec_flags2str' was not declared. Should it be static?
Signed-off-by: NScott Weir <sjw0410@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>